Plugs, Sockets & Chargers

The Status 1-port USB power adapter is a compact mains plug designed to charge USB-powered devices from a standard wall socket. It accepts any standard USB charging cable, making it compatible with a wide range of smartphones, tablets, and handheld devices commonly used in hospitality and catering operations.

In a front-of-house or back-office setting, it serves a straightforward purpose — keeping mobile phones, wireless payment terminals, and handheld order devices charged and ready for service. It is not a high-output multi-port charger, so it is best suited to situations where one device at a time needs topping up rather than simultaneous charging of multiple units.

It is a simple, low-cost consumable that many operators keep as a spare or replacement, particularly where wall chargers go missing or fail over time. If your operation involves charging several devices regularly throughout the day, a multi-port USB charger or a dedicated charging station would be a more practical solution.

If you are unsure what best suits your setup, the team is happy to point you in the right direction.

This Status cable reel provides four 13A mains sockets on a 5m drum, with a built-in thermal cut out as a safety measure against overheating under load. It is a practical piece of electrical equipment used in commercial kitchens, prep areas, and back-of-house spaces where a single wall socket needs to serve multiple appliances or where a fixed outlet cannot easily be reached.

The drum design keeps the cable managed neatly when not in use and guides it cleanly on and off the reel, reducing the risk of damage from tangling or kinking over time. The thermal cut out provides an automatic safety response if the reel is used beyond its rated capacity, which is a useful safeguard in busy environments where multiple items may be plugged in simultaneously.

• Four sockets allow simultaneous connection of multiple low-draw appliances
• Thermal cut out helps prevent overheating under sustained load
• 5m cable extends reach without trailing extension leads across walkways
• Drum winding keeps cable tidy and protected between uses
• Compact and light enough to move between workstations as required

It is worth noting that this reel is rated at 13A in total across all sockets, not per socket. It is best suited to powering lower-draw equipment such as hand blenders, food processors, small appliances, or charging devices — not high-draw appliances running simultaneously. Always ensure the cable is fully unwound from the drum before use under load.

If you are unsure whether this suits your specific setup or load requirements, the team is happy to talk it through before you order.

The Olympia Table Lamp Charging Station is a dedicated multi-lamp charging base designed to keep cordless table lamps powered and ready for front-of-house use. It charges up to six Olympia Siena or Lucca table lamps simultaneously — covering both the 200mm and 300mm variants — and ships complete with all necessary cables and a UK/IE plug, so setup is straightforward with no additional accessories required.

For venues that rely on cordless lamp lighting throughout service — restaurants, private dining rooms, hotels, or event spaces — managing battery life across a large number of lamps is a genuine operational consideration. A centralised charging station simplifies this considerably. Rather than tracking individual lamps and chargers, front-of-house teams can rotate lamps through the station between services or overnight, maintaining a consistent supply of fully charged units without a disorganised tangle of cables on the bar or in the back office.

• Charges up to six lamps in a single compact station
• Compatible with both Siena and Lucca ranges (200mm and 300mm)
• Supplied with all cables and UK/IE plug — no additional purchases needed
• Lightweight and compact enough to store discreetly behind the bar or in a service area
• Simplifies lamp rotation management across shift changes

The station is a compact, lightweight unit, well suited to venues running between four and six lamps at a time. For larger operations with a higher lamp count, it is worth considering whether a second station would better support your rotation schedule, particularly during back-to-back covers.

If you are unsure how many lamps your room plan requires or whether this station covers your volume, the team is happy to talk it through before you order.

This is a single-port mains USB-C power adapter from Status, designed to charge USB-C compatible devices from a standard UK wall socket. It accepts branded and generic USB-C cables and is compatible with a wide range of portable devices including smartphones, tablets, and handheld point-of-sale terminals.

In a hospitality or catering environment, keeping front-of-house devices charged throughout a shift is a routine but easily overlooked requirement. A dedicated adapter at a counter, back-office workstation, or pass area means handheld POS units, order tablets, and staff phones can be topped up without relying on spare laptop ports or shared office equipment.

• Accepts standard USB-C cables — no proprietary accessories required
• Compact form factor suits counter, office, or back-of-house use
• Compatible with smartphones, tablets, and handheld POS terminals
• White finish suits front-of-house counter installations

There are no special installation requirements — it plugs into any standard UK mains socket. It is worth noting this is a single-port adapter, so sites needing to charge multiple devices simultaneously would be better served by a multi-port alternative.

This adapter is well suited to small hospitality operations, pop-up catering units, or any site needing a simple, low-cost charging solution for one or two devices. It is a practical everyday item rather than a high-demand solution, and fits neatly into a general smallwares order.

If you are equipping a new site and want to make sure you have the right charging provisions across the operation, the team is happy to help you work through what you need.

The Steelite Lampa Magnetic 15 is a multi-contact charging tray designed to hold and simultaneously charge up to 15 rechargeable table lamps. It connects via a standard UK plug and provides a centralised, organised charging station for front-of-house lighting, keeping lamps ready for service without the need to manage individual chargers or cables across the venue.

In a busy restaurant or hotel dining environment, managing a fleet of table lamps between sittings can quickly become disorganised. A tray of this capacity allows all lamps to charge together in a back-of-house or bar storage area, so staff can deploy a full set for service and return them to charge between covers without hunting for individual charging leads. The magnetic contact system means lamps seat quickly and securely, which matters when staff are turning tables at pace.

Practical advantages for front-of-house operations include:

• Charges up to 15 lamps from a single UK plug socket
• Magnetic contacts allow quick, secure lamp placement without precise alignment
• Centralised charging reduces cable clutter and the risk of lamps being left uncharged
• Compact tray format suits back-of-house shelving or bar storage
• Compatible with Steelite Lampa rechargeable lamp range

At just under 2.25kg, the tray is light enough to move between storage areas if needed, though in practice most operators fix a permanent charging location close to a suitable socket. The tray measures approximately 2920mm in width, making it a long, flat unit — ensure your storage shelving or charging area can accommodate that footprint before ordering.

This tray is well suited to restaurants, hotels, and event venues running 10 or more Steelite Lampa table lamps as part of their cover setup. Smaller operations running fewer lamps may find a lower-capacity tray more practical, while larger venues running multiple sittings across a bigger floor may benefit from a second tray to rotate lamps through service without delay.

If you're unsure how many charging trays your operation needs based on cover count and sitting frequency, we're happy to talk it through before you order.

This Status heavy duty extension lead provides a straightforward, reliable way to extend mains power reach across a commercial kitchen, prep area, or back-of-house workspace. The orange plug is a practical visual marker that helps distinguish it from standard domestic leads in busy environments where multiple cables are in use.

The 10-metre cable length makes it practical for larger kitchens or open-plan catering spaces where fixed sockets may not be conveniently positioned near equipment. It is commonly used as a temporary or supplementary power solution during kitchen fit-outs, equipment trials, events catering, and mobile or temporary kitchen setups.

Practical benefits for catering operators include:

• Generous 10m cable length reduces the need to reposition equipment around fixed sockets
• Heavy duty construction suited to the rigours of a working kitchen environment
• Orange plug aids quick visual identification among multiple leads
• Useful for temporary or event catering setups where power points are limited
• Straightforward plug-and-use with no installation required

It is worth noting that extension leads should be used as a practical short-term or supplementary solution rather than a permanent replacement for properly installed fixed sockets. For high-draw equipment such as combi ovens, fryers, or large refrigeration units, a qualified electrician should always assess whether a dedicated circuit is the appropriate route.

This lead is well suited to catering businesses needing a dependable, heavy duty extension for general kitchen and prep area use, particularly in mobile, temporary, or event settings. It is a practical addition to any catering operation's smallwares inventory.

If you are unsure whether an extension lead is the right solution for a particular piece of equipment or kitchen layout, the team is happy to point you in the right direction.

This is a standard four-socket extension lead with a 3-metre cable and a 13A rating, intended for general-purpose use in back-of-house or office areas. A power indicator light confirms when the unit is live, which is a useful safety check in busy environments.

In a catering context, this type of lead is suited to low-draw applications: charging devices, powering small office equipment, or running a till or card reader in a front-of-house area. It is not rated for high-draw commercial kitchen appliances such as fryers, ovens, or refrigeration units, and should not be used as a substitute for a properly wired socket in a production kitchen environment.

It is worth noting that in commercial kitchens, permanent fixed wiring is the correct solution for equipment in regular use. Extension leads of this type are best treated as a temporary or supplementary measure, and any installation involving electrical equipment in a food business should comply with current regulations and be reviewed by a qualified electrician where appropriate.

If you are unsure whether this product suits your intended use, or if you are looking for a more robust electrical supply solution, the team is happy to point you in the right direction.

This is a four-socket extension lead from Status, supplied with a two-metre cable and built-in surge protection. It takes a single wall outlet and provides four individually accessible sockets, with the surge protection circuit helping to guard connected equipment against brief spikes in mains voltage.

In a catering environment, this type of lead is most useful in back-of-house office areas, dry goods stores, or front-of-house service counters where low-draw equipment such as card readers, tablet stands, label printers, or phone chargers need to be run from a single outlet. It is not intended for high-current catering appliances such as fryers, ovens, or refrigeration units, and should not be used as a substitute for fixed additional sockets where permanent demand exists.

Practical benefits for day-to-day use include:

• Four sockets from a single wall outlet, reducing cable clutter
• Surge protection to help guard sensitive electronics against voltage spikes
• Two-metre cable length gives useful reach from the nearest outlet
• Compact and easy to reposition as layouts change
• Standard UK plug and socket format, no adaptor required

It is worth noting that extension leads of this type are suitable for occasional and light-duty use. For any fixed or semi-permanent electrical installation in a commercial kitchen, current regulations will generally require a qualified electrician to install additional outlets rather than relying on trailing leads.

If you are unsure whether this lead is appropriate for your intended use, or if you need advice on safe electrical practice in a commercial kitchen setting, the team is happy to help point you in the right direction.

This Status cable reel provides four 13A socket outlets on a 15-metre drum, with a built-in thermal cut out as a safeguard against overloading or overheating. It is a straightforward, practical piece of electrical equipment used across commercial kitchens, prep areas, event catering, and back-of-house maintenance tasks where a nearby socket is not always available.

The drum design guides the cable neatly on and off, reducing wear on the cable over repeated use and keeping it manageable in a busy environment. The thermal cut out provides an automatic safety response if the reel is asked to carry more load than it is rated for — a sensible precaution in environments where multiple appliances may be in use simultaneously.

Typical uses in catering environments include powering temporary equipment during a service, charging equipment in storage areas, running cleaning or maintenance tools, and supporting front-of-house event set-up where fixed sockets are limited.

• Four 13A sockets provide flexibility for multiple low-draw appliances
• Thermal cut out reduces overload risk in busy operational environments
• 15-metre cable gives practical reach across most kitchen and service areas
• Drum winding guides reduce cable kinking and extend service life
• Compact reel format makes storage and transit straightforward

It is worth noting that this reel is suitable for general-purpose use at 13A. It is not intended to power high-draw fixed equipment, and the cable should be fully unwound during use to avoid heat build-up on the drum. If you are unsure whether this reel is appropriate for a specific application, the team is happy to advise.