Status

The Status 1-port USB power adapter is a compact mains plug designed to charge USB-powered devices from a standard wall socket. It accepts any standard USB charging cable, making it compatible with a wide range of smartphones, tablets, and handheld devices commonly used in hospitality and catering operations.

In a front-of-house or back-office setting, it serves a straightforward purpose — keeping mobile phones, wireless payment terminals, and handheld order devices charged and ready for service. It is not a high-output multi-port charger, so it is best suited to situations where one device at a time needs topping up rather than simultaneous charging of multiple units.

It is a simple, low-cost consumable that many operators keep as a spare or replacement, particularly where wall chargers go missing or fail over time. If your operation involves charging several devices regularly throughout the day, a multi-port USB charger or a dedicated charging station would be a more practical solution.

If you are unsure what best suits your setup, the team is happy to point you in the right direction.

This Status cable reel provides four 13A mains sockets on a 5m drum, with a built-in thermal cut out as a safety measure against overheating under load. It is a practical piece of electrical equipment used in commercial kitchens, prep areas, and back-of-house spaces where a single wall socket needs to serve multiple appliances or where a fixed outlet cannot easily be reached.

The drum design keeps the cable managed neatly when not in use and guides it cleanly on and off the reel, reducing the risk of damage from tangling or kinking over time. The thermal cut out provides an automatic safety response if the reel is used beyond its rated capacity, which is a useful safeguard in busy environments where multiple items may be plugged in simultaneously.

• Four sockets allow simultaneous connection of multiple low-draw appliances
• Thermal cut out helps prevent overheating under sustained load
• 5m cable extends reach without trailing extension leads across walkways
• Drum winding keeps cable tidy and protected between uses
• Compact and light enough to move between workstations as required

It is worth noting that this reel is rated at 13A in total across all sockets, not per socket. It is best suited to powering lower-draw equipment such as hand blenders, food processors, small appliances, or charging devices — not high-draw appliances running simultaneously. Always ensure the cable is fully unwound from the drum before use under load.

If you are unsure whether this suits your specific setup or load requirements, the team is happy to talk it through before you order.

These G4 LED bulbs from Maxim are a straightforward like-for-like replacement for standard G4 halogen capsule bulbs, commonly used in display lighting, under-cabinet fittings, and decorative light fittings found in restaurants, bars, cafés, and similar hospitality settings. They produce a cool white light that suits environments where clear, bright illumination is needed.

The cool white colour temperature is well suited to food display counters, bar shelving, and service areas where good visibility matters. It also works in dining areas where a crisper, cleaner light is preferred over warm white tones.

• Significantly lower energy draw compared to equivalent halogen G4 bulbs
• Longer rated lifespan reduces how often bulbs need replacing
• Lower heat output than halogen, which can matter in enclosed fittings
• G4 bi-pin fitting for straightforward replacement with no rewiring
• Cool white output suitable for display and task lighting in hospitality spaces

These are a simple consumable item, but it is worth checking that your existing light fittings are compatible with LED capsule bulbs before ordering in quantity — some older dimmable fittings may require a compatible LED driver to function correctly. They are sold in packs of two, which suits most replacement needs.

If you are specifying lighting across a larger venue or have questions about compatibility with your current fittings, the team is happy to help point you in the right direction.

The Status 2kW portable fan heater is a compact, mains-powered unit designed to provide supplementary heat in staff areas, storage rooms, changing rooms, and other back-of-house spaces. It operates in two positions — upright on a flat surface or tilted to direct airflow at floor level — giving a degree of flexibility depending on how the space is used.

It is not a piece of commercial catering equipment in the conventional sense, but it is a practical, low-cost solution for operators who need to take the chill off a draughty prep area, loading bay, or staff welfare room without committing to a fixed or permanent heating installation. The two heat settings and adjustable thermostat allow the output to be matched to the size of the space rather than running at full power continuously.

From a practical standpoint, the overheat protection is a sensible safeguard in environments where the unit might be left unattended for periods. The lightweight construction means it can be moved easily between areas as needed.

• Two heat settings for flexible output control
• Adjustable thermostat to avoid unnecessary energy use
• Dual position operation — floor standing or angled
• Overheat protection as a standard safety feature
• Lightweight and easy to reposition between spaces

This unit is best suited to small, enclosed back-of-house areas rather than open or high-ceilinged spaces where a 2kW output will be insufficient to maintain a comfortable temperature. For larger staff areas or spaces with poor insulation, a higher-output unit would be a more appropriate choice.

If you are unsure whether this heater is the right fit for your space, we are happy to help you think it through.

These 6W LED candle bulbs are a straightforward, energy-efficient replacement for traditional incandescent candle lamps, sold in a pack of ten with a small Edison screw (SES/E14) fitting. They produce a warm white light output comparable to a 40W incandescent bulb, making them a practical choice for front-of-house environments where consistent, comfortable lighting matters.

In a hospitality setting, replacing incandescent or halogen candle lamps with LED equivalents is one of the simpler ways to reduce energy consumption and maintenance frequency. LEDs of this type run cooler, place less demand on fittings, and have a considerably longer service life than the bulbs they replace — which matters when you have large numbers of lamps across a dining room or bar area.

• A+ energy rating helps reduce lighting running costs across multiple fittings
• Warm white output suits relaxed dining and bar environments
• SES/E14 fitting is widely used in decorative pendants, wall sconces, and table lamps
• Pack of ten reduces the frequency of reordering and ensures consistent colour temperature throughout a space
• Cool running reduces heat build-up in enclosed or semi-enclosed fittings

These bulbs are suited to restaurants, hotels, bars, and cafés that use SES candle-style fittings in their customer-facing areas. They are not intended for use in commercial kitchen extraction canopies or specialist task lighting — their role is ambient and decorative lighting in front-of-house spaces.

If you are replacing lamps across a large site or are unsure whether these are compatible with your existing fittings or dimmer circuits, our team is happy to help you work through the requirements before you order.

These Status Maxim GU10 LED bulbs are a straightforward replacement option for standard GU10 spotlight fittings. Each bulb delivers a warm white output in a pearl finish and is rated A+ for energy efficiency, making them a practical choice where multiple fittings need to be maintained across a site.

In a commercial environment, running costs across a full bank of spotlights add up. Switching to LED across service areas, storage rooms, or front-of-house dining spaces is one of the simpler ways to reduce energy overhead without any change to the existing fittings. The warm white colour temperature suits dining areas and serveries where a cooler, harsher light would feel unwelcoming.

• A+ energy rating helps reduce electricity costs across multiple fittings
• GU10 fitting compatible with standard spotlight tracks and downlighters
• Pearl finish diffuses light evenly without harsh glare
• Warm white output suits dining, servery, and front-of-house areas
• Supplied in a pack of ten, practical for bulk replacement

These are a direct swap for existing GU10 halogen bulbs and require no specialist installation. They suit kitchens, dining rooms, corridors, and any area already fitted with GU10 downlighters. The pack size makes them a sensible stock item for sites that carry out their own routine maintenance.

If you are speccing lighting for a larger refurbishment or need advice on bulb types across different areas of a site, our team is happy to help point you in the right direction.

The Status Karlstad 400 is a mains-powered LED string light set designed for both indoor and outdoor decorative use. The 400 warm white LEDs are distributed across a 37-metre cable run, making this a practical choice for covering pergolas, terraces, dining areas, function rooms, or bar spaces where ambient lighting is needed across a reasonable span.

In hospitality settings, warm white LED string lights of this type are commonly used to create a relaxed atmosphere in covered outdoor areas, event marquees, and internal dining spaces. The warm white tone tends to complement food presentation better than cool white alternatives, which is worth considering when choosing lighting for areas where customers are eating. The first LED sits five metres from the plug, which allows the power connection to be kept inside or in a weatherproof enclosure while the lights extend outward — a sensible arrangement for semi-covered outdoor installations.

Practical points to consider before installing:

• The 5-metre lead from plug to first light gives useful flexibility for keeping electrics under cover
• Suited to covered or sheltered outdoor use as well as indoor environments
• Warm white output helps create an inviting atmosphere in dining and event spaces
• Mains-powered, so installation should account for access to a suitable outdoor-rated socket where needed

This set is well suited to smaller venues, seasonal decorating, or supplementary ambient lighting in spaces that already have primary task lighting in place. For larger sites needing greater coverage or commercial-grade exterior fittings, heavier-duty options may be more appropriate.

If you're unsure whether this will cover your space or suit your installation setup, we're happy to talk it through before you order.

This is a 220mm bare infrared quartz heat bulb rated at 500W, fitted with a standard R7 push-in cap. It is a direct replacement bulb for commercial food warming applications where the existing fitting accepts an R7 cap type. The quartz glass sleeve is a normal feature of this bulb format and is not an additional protective guard.

In a working kitchen, heat lamps over the pass, chip dumps, burger shoots and hot holding stations depend on reliable infrared output to keep plated food at a safe serving temperature between the kitchen and front-of-house. A failed bulb in that position disrupts service and risks food safety compliance. Having a supply of correctly specified replacement bulbs on hand avoids that disruption.

The R7 cap is one of the most widely used fittings in catering heat lamp equipment, which makes this bulb compatible with a broad range of pass lamps and food warming units already in circulation. Key practical points include:

• Push-in R7 fitting for straightforward replacement
• Quartz glass construction suitable for the heat and humidity of a working kitchen environment
• Infrared output focused on food surface warming rather than ambient air heating
• Compact 220mm format fits standard lamp housings designed for this bulb length

Before purchasing, confirm that your existing lamp housing is rated for 500W and accepts the 220mm R7 format specifically — lamp housings vary and not all accept this bulb length or wattage. If you are unsure of the correct specification for your equipment, it is worth checking the lamp unit's documentation or the original bulb markings before ordering.

This bulb is suited to any commercial kitchen or front-of-house operation using heat lamp equipment for pass service, chip and fried food holding, or similar food warming duties. If your operation runs multiple high-throughput stations or extended service periods, it may be worth discussing your wider heat lamp setup with us — we are happy to help you identify the right replacement specification.

The Status Varberg 400 is a mains-powered LED string light set carrying 400 bulbs across a 37-metre cable run. The bulbs cycle through red, green, blue and yellow, making the set a practical choice for operators who want consistent, colourful ambient lighting without the expense of a bespoke installation. The cable is designed for both indoor and outdoor use, so it works equally well strung across a covered terrace, wound through an indoor dining area, or used as seasonal decoration in a café or event space.

For hospitality and catering environments, string lights of this length are most commonly used to dress outdoor seating areas, marquees, pop-up event spaces, or entrance areas where you want warmth and visual interest without committing to fixed electrical work. The first LED sits five metres from the plug, which gives enough slack to keep the plug inside or in a weatherproof enclosure — a sensible detail for outdoor use where moisture is a consideration.

Practical points worth noting before ordering:

• Mains-powered — requires a nearby socket or outdoor-rated extension lead
• First LED starts 5m from plug, allowing the plug to remain in a dry location
• Multicolour fixed palette: red, green, blue and yellow — not adjustable or dimmable
• Suited to seasonal decoration, event dressing, and hospitality ambient lighting
• Lightweight at 620g — easy to install and reposition as needed

This is a straightforward decorative light set rather than a primary lighting solution. It won't replace functional task or ambient lighting in a dining room, but for adding atmosphere to outdoor or semi-outdoor spaces it does the job reliably. If you're planning a larger installation or need a set with adjustable colour or dimming capability, it's worth a conversation with the team before you order.

The Status Falun 400 is a mains-powered LED string light set designed for both indoor and outdoor use. With 400 cool white LEDs spread across a 37-metre total cable length, it provides consistent, even illumination across large areas without the need for multiple sets or extension management.

In hospitality environments — pub gardens, covered terraces, function rooms, event marquees — this kind of lighting serves a practical decorative purpose throughout the year, not just seasonally. The cool white output gives a clean, bright appearance that works well in ambient outdoor settings or as supplementary lighting in indoor dining areas where a simple, uniform light source is preferred over warmer tones.

A few practical points worth noting for installation:

• The first LED sits 5 metres from the plug, giving flexibility to keep the plug indoors or in a weatherproof enclosure
• Suitable for outdoor use, though the plug and connection points should always be protected from direct exposure to rain
• Mains-powered, so routing to a suitable outdoor socket or weatherproof box will be needed
• At 630g, the full run is lightweight enough to suspend from timber, wire, or frame structures without heavy fixings

This set is well suited to smaller hospitality spaces — a compact beer garden, a private dining room, or a seasonal outdoor area. For larger venues or extended runs requiring broader coverage, multiple sets or a higher-count alternative would be worth considering.

If you're unsure whether this fits your space or setup, the team is happy to talk it through.

These Status Maxim LED GLS bulbs are a practical, energy-efficient replacement for traditional 60W incandescent lamps. Supplied in a pack of ten with an Edison screw (ES) fitting, they produce a warm white light at 2700K — a colour temperature that closely replicates the tone of older incandescent bulbs and suits front-of-house, dining, and hospitality environments where ambient lighting matters.

In day-to-day venue operation, the long rated lifespan reduces the frequency of replacements, which is a meaningful practical advantage in areas where access for changing bulbs is awkward or time-consuming. The A+ energy rating reflects a significant reduction in running costs compared with the incandescent equivalents they replace, and the output is consistent from switch-on without the warm-up delay associated with some older low-energy lamp types.

• Direct like-for-like replacement for standard 60W ES incandescent bulbs
• Warm 2700K output maintains ambient character in dining and front-of-house areas
• A+ rated — lower energy draw reduces ongoing electricity costs
• Long rated lifespan reduces maintenance call-outs for lamp replacement
• Pack of ten offers useful stock for multi-room or multi-site rollouts

These bulbs require a standard Edison screw fitting. They are not suitable for use with dimmer switches unless the dimmer is specifically rated for LED loads — it is worth confirming compatibility with your existing controls before fitting throughout a venue.

Well suited to restaurants, cafés, bars, hotels, and similar hospitality venues replacing incandescent lamps across front-of-house areas. If you are unsure about fitting compatibility or have specific requirements around dimming or colour rendering, the team is happy to help you confirm the right choice before you order.

These are standard GLS-form LED bulbs with a bayonet cap (BC/B22) fitting, producing a cool white light output broadly equivalent to a traditional 60W incandescent. They are sold in a pack of ten, making them a practical bulk option for operators who need to replace multiple fittings in one order.

In a commercial environment, back-of-house areas such as storage rooms, changing rooms, corridors, and staff facilities often use standard BC lamp fittings. Replacing older incandescent or halogen bulbs with LED equivalents reduces energy consumption noticeably across a site with multiple fittings, and the longer rated lifespan of LED technology means less frequent lamp changes — a practical consideration when access to ceiling fittings requires stepladders or disruption to service.

• A+ energy rating reduces running costs compared to older incandescent equivalents
• Bayonet cap fitting suits the most common lamp holder type in UK buildings
• Cool white output suits utility and task areas where a clean, neutral light is preferred
• Plastic and aluminium construction keeps the bulb lightweight at 38g per unit
• Pack of ten provides a useful stock quantity for multi-room or multi-site operators

These bulbs are suited to standard BC lamp holders in non-specialist fittings. They are not designed for use in enclosed luminaires unless the fitting is rated for LED, and they are not a replacement for specialist food display or preparation lighting where colour rendering is a priority. Check your existing lamp holders are BC/B22 before ordering.

Well suited to hospitality and catering operators looking to transition back-of-house lighting to LED on a modest budget. If you have questions about lighting suitability for specific areas of your site, the team is happy to help.

These 6W LED candle bulbs offer a warm white output equivalent to a traditional 40W incandescent candle, making them a practical like-for-like replacement in any fitting that accepts a bayonet cap (BC) connection. The warm white colour temperature suits front-of-house environments where a comfortable, welcoming light quality is preferable to a cooler, more clinical tone.

For hospitality and catering operations, lighting running costs are a background overhead that adds up across dozens of fittings over time. At an A+ energy rating, these bulbs consume significantly less power than the incandescent equivalents they replace, which over a full operating week translates into a measurable reduction in electricity draw across a dining room, reception, or bar area.

Supplied in packs of ten, they are well suited to operations that maintain a stock of spares or are refitting multiple fittings at once — useful for venues with a large number of decorative or functional candle-style light points.

• Bayonet cap (BC/B22) fitting — standard UK socket compatibility
• Warm white output suitable for front-of-house and dining environments
• A+ energy rating reduces running costs compared to incandescent equivalents
• Compact candle form factor fits standard decorative luminaires
• Pack of ten provides cost-effective stock for multi-fitting installations

If you are unsure whether these are the right specification for your fittings or are working through a larger lighting refresh, the team is happy to help you work through the requirements.

These LED GLS bulbs from Status's Maxim range are a straightforward, energy-efficient replacement for standard 60W incandescent bulbs. Using an Edison Screw (ES/E27) fitting and producing a cool white light, they are suited to general-purpose lighting in kitchens, back-of-house areas, staff facilities, and storage rooms.

With an A+ energy rating, each bulb draws 10W to deliver output comparable to a traditional 60W lamp, which translates to a meaningful reduction in electricity consumption across a site where multiple fittings are in use. Buying in a pack of ten makes it practical to stock spares or carry out a straightforward like-for-like replacement across a run of fittings in one go.

• ES (E27) Edison Screw fitting — widely compatible with standard lamp holders
• Cool white output — suits utility and working areas rather than warm ambient spaces
• A+ energy rating — lower running costs versus incandescent equivalents
• Lightweight plastic and aluminium construction
• Pack of ten — practical for bulk replacement or on-site stock

These are simple utility bulbs rather than specialist catering equipment. They are well suited to back-of-house and staff areas, but it is worth confirming that ES fittings are already in place before ordering, as the bulbs are not compatible with bayonet-cap lamp holders. If you are fitting out a new area or are unsure about your current lamp holder type, it is worth checking before purchasing.

If you have questions about lighting requirements across a site or want to confirm compatibility with existing fittings, the team is happy to help.

This 220mm infrared quartz bulb is a replacement heat lamp bulb designed for use in commercial pass lamps, chip dump heaters, and other hot holding equipment. It operates at 300W and uses the widely standardised R7 push-in cap fitting, encased in a quartz glass sleeve that protects the element during service.

Infrared quartz bulbs of this type are a staple in commercial kitchens because they deliver heat almost instantly on switch-on, with no warm-up period. That makes them well suited to pass situations where consistent radiant heat is needed throughout service and where a failed bulb needs to be swapped out quickly with minimal disruption. The quartz sleeve offers reasonable durability in the hot, humid conditions typical of a busy pass.

From an operational standpoint, the R7 cap is one of the most common fittings across commercial heat lamp and pass equipment, which means this bulb is a straightforward like-for-like replacement in the majority of installations. Key practical points include:

• Push-in R7 cap for quick, tool-free bulb changes mid-service
• Instant heat output — no warm-up delay when switched on
• Quartz glass sleeve protects the element and withstands kitchen heat
• Suitable for pass lamps, chip dumps, and hot holding applications
• Lightweight and easy to store as a spare on site

This bulb is appropriate for any kitchen running standard pass lamp or chip dump equipment with an R7 fitting. It is a consumable item and it is worth keeping at least one spare on site, as a failed heat lamp during a busy service is a common and easily avoided problem. It is not suitable for domestic or low-temperature applications.

If you are unsure whether this bulb is compatible with your existing equipment, our team is happy to advise.

The Status Boden 480 is a mains-powered LED string light set designed for both indoor and outdoor use. Running to a total cable length of 16.9m, it provides a practical reach for decorating outdoor terraces, covered seating areas, event spaces, or interior dining rooms where a consistent ambient light effect is needed throughout the year.

The first LED sits 10 metres from the plug, which is a useful practical detail — it means the plug and any extension connections can be kept inside or within a weatherproof enclosure, reducing exposure to the elements without limiting where the lit portion of the string can be positioned. This makes installation more straightforward in venues where outdoor sockets are limited or where a dry connection point is some distance from the display area.

For hospitality and catering businesses, string lighting of this type is commonly used to define al fresco dining spaces, add warmth to covered canopy areas, or provide consistent decorative lighting in function rooms and bar areas without the need for complex installation. The cool white tone works well in contemporary settings and reads cleanly in both low-light and brighter ambient conditions.

• 16.9m total cable length gives useful reach across larger seating areas
• Plug positioned 10m from the first LED, keeping connections safely indoors
• Suitable for both covered outdoor use and interior spaces
• Cool white tone suits modern dining and bar environments
• Mains-powered with no battery management required

It is worth confirming your intended mounting arrangement and power supply location before ordering, particularly for permanent outdoor installations. If you are unsure whether this string length suits your specific space, the team is happy to help you work through the layout.

The Status Ludvika 720 is a mains-powered LED string light set designed for both indoor and outdoor decorative use. With a total cable length of 19.3m and 720 warm white LEDs, it is commonly used in hospitality settings — pub gardens, covered terraces, function rooms, and café interiors — where reliable, low-maintenance ambient lighting is needed across a reasonable span.

The warm white tone suits most hospitality environments well, providing a comfortable level of illumination without the harshness of cool-white alternatives. The first LED sits 10 metres from the plug, which allows the power connection to be kept inside or within a weatherproof enclosure while the lit section runs into an outdoor area — a practical arrangement for venues where routing a lead through a door or wall is preferable to having mains connections exposed to the elements.

For operators considering this for regular or year-round outdoor use, it is worth confirming that the chosen installation point is suitable for the cable run and that any outdoor socket or extension is appropriately rated. This set is well suited to seasonal displays and permanent ambient installations alike, though for very large outdoor areas a longer or multi-strand setup may be needed to achieve full coverage.

If you are unsure whether this set will cover your space or how best to arrange the run for your venue, our team is happy to talk it through.

The Status Nybro 720 is a mains-powered LED string light set producing a mix of red, green, blue and yellow illumination across a total cable run of 19.3 metres. The first LED begins ten metres from the plug end, which means the power source can be kept inside or within a weatherproof enclosure while the lit section extends into an outdoor area.

In hospitality and events settings, these lights are commonly used to dress outdoor terraces, covered pergolas, marquees, function rooms and seasonal display areas. The multicoloured output suits festive periods well, though the spread of colours makes them a usable year-round option for venues that want ambient decorative lighting without committing to a single-colour scheme.

A few practical points worth noting before installation:

• Mains-powered — requires access to a suitable outdoor-rated socket or weatherproof enclosure for the plug
• 19.3m total cable length suits mid-sized spaces; larger areas may need multiple sets
• The 10m lead-in from plug to first LED gives useful flexibility for routing the cable discreetly
• Rated for outdoor use, though the plug end should always remain protected from direct exposure to weather

These lights are well suited to pubs, restaurants, cafés and event hire operators looking for a practical, reusable decorative lighting solution. They are not a commercial-grade permanent installation product, so venues requiring hardwired or IP-rated fixed lighting should consider a dedicated exterior lighting specification instead.

If you are unsure whether these lights are the right fit for your space or setup, the team is happy to point you in the right direction.

These Status Maxim GU10 LED bulbs are a straightforward, energy-efficient replacement for standard 50W halogen GU10 fittings. Supplied in a pack of ten, they are rated A+ for energy efficiency and produce a cool white light output suited to task-focused environments where clear, consistent illumination matters.

In a commercial kitchen or back-of-house setting, the cool white colour temperature supports visibility at prep stations, pass areas, and storage rooms. Running at 5W against the 50W halogen equivalent, the reduction in energy draw is meaningful across a site with multiple fittings, and the LED construction avoids the heat output associated with older halogen lamps — a practical consideration in areas where ambient temperature is already a concern.

• A+ energy rating reduces running costs versus halogen equivalents
• Cool white output aids visibility in prep and service areas
• LED construction runs cooler than halogen, reducing ambient heat contribution
• Pack of ten suits initial installs or bulk replacements across a site
• Direct GU10 replacement — no fitting modification required

These bulbs are a direct swap into any existing GU10 downlight fitting, so no rewiring or specialist installation is needed. They are suited to enclosed and open downlight fittings alike, though as with any LED bulb, compatibility with dimmer switches should be confirmed before purchase if dimming is required.

Well suited to smaller catering operations, café fitouts, front-of-house areas, and staff or storage rooms. For larger sites with extensive lighting arrays, it is worth considering whether a higher-lumen output bulb would better meet the illumination requirements of the space.

If you are unsure which specification suits your fittings or environment, we are happy to help point you in the right direction before you order.

This is a single-port mains USB-C power adapter from Status, designed to charge USB-C compatible devices from a standard UK wall socket. It accepts branded and generic USB-C cables and is compatible with a wide range of portable devices including smartphones, tablets, and handheld point-of-sale terminals.

In a hospitality or catering environment, keeping front-of-house devices charged throughout a shift is a routine but easily overlooked requirement. A dedicated adapter at a counter, back-office workstation, or pass area means handheld POS units, order tablets, and staff phones can be topped up without relying on spare laptop ports or shared office equipment.

• Accepts standard USB-C cables — no proprietary accessories required
• Compact form factor suits counter, office, or back-of-house use
• Compatible with smartphones, tablets, and handheld POS terminals
• White finish suits front-of-house counter installations

There are no special installation requirements — it plugs into any standard UK mains socket. It is worth noting this is a single-port adapter, so sites needing to charge multiple devices simultaneously would be better served by a multi-port alternative.

This adapter is well suited to small hospitality operations, pop-up catering units, or any site needing a simple, low-cost charging solution for one or two devices. It is a practical everyday item rather than a high-demand solution, and fits neatly into a general smallwares order.

If you are equipping a new site and want to make sure you have the right charging provisions across the operation, the team is happy to help you work through what you need.

This Status heavy duty extension lead provides a straightforward, reliable way to extend mains power reach across a commercial kitchen, prep area, or back-of-house workspace. The orange plug is a practical visual marker that helps distinguish it from standard domestic leads in busy environments where multiple cables are in use.

The 10-metre cable length makes it practical for larger kitchens or open-plan catering spaces where fixed sockets may not be conveniently positioned near equipment. It is commonly used as a temporary or supplementary power solution during kitchen fit-outs, equipment trials, events catering, and mobile or temporary kitchen setups.

Practical benefits for catering operators include:

• Generous 10m cable length reduces the need to reposition equipment around fixed sockets
• Heavy duty construction suited to the rigours of a working kitchen environment
• Orange plug aids quick visual identification among multiple leads
• Useful for temporary or event catering setups where power points are limited
• Straightforward plug-and-use with no installation required

It is worth noting that extension leads should be used as a practical short-term or supplementary solution rather than a permanent replacement for properly installed fixed sockets. For high-draw equipment such as combi ovens, fryers, or large refrigeration units, a qualified electrician should always assess whether a dedicated circuit is the appropriate route.

This lead is well suited to catering businesses needing a dependable, heavy duty extension for general kitchen and prep area use, particularly in mobile, temporary, or event settings. It is a practical addition to any catering operation's smallwares inventory.

If you are unsure whether an extension lead is the right solution for a particular piece of equipment or kitchen layout, the team is happy to point you in the right direction.

This is a standard four-socket extension lead with a 3-metre cable and a 13A rating, intended for general-purpose use in back-of-house or office areas. A power indicator light confirms when the unit is live, which is a useful safety check in busy environments.

In a catering context, this type of lead is suited to low-draw applications: charging devices, powering small office equipment, or running a till or card reader in a front-of-house area. It is not rated for high-draw commercial kitchen appliances such as fryers, ovens, or refrigeration units, and should not be used as a substitute for a properly wired socket in a production kitchen environment.

It is worth noting that in commercial kitchens, permanent fixed wiring is the correct solution for equipment in regular use. Extension leads of this type are best treated as a temporary or supplementary measure, and any installation involving electrical equipment in a food business should comply with current regulations and be reviewed by a qualified electrician where appropriate.

If you are unsure whether this product suits your intended use, or if you are looking for a more robust electrical supply solution, the team is happy to point you in the right direction.

This is a four-socket extension lead from Status, supplied with a two-metre cable and built-in surge protection. It takes a single wall outlet and provides four individually accessible sockets, with the surge protection circuit helping to guard connected equipment against brief spikes in mains voltage.

In a catering environment, this type of lead is most useful in back-of-house office areas, dry goods stores, or front-of-house service counters where low-draw equipment such as card readers, tablet stands, label printers, or phone chargers need to be run from a single outlet. It is not intended for high-current catering appliances such as fryers, ovens, or refrigeration units, and should not be used as a substitute for fixed additional sockets where permanent demand exists.

Practical benefits for day-to-day use include:

• Four sockets from a single wall outlet, reducing cable clutter
• Surge protection to help guard sensitive electronics against voltage spikes
• Two-metre cable length gives useful reach from the nearest outlet
• Compact and easy to reposition as layouts change
• Standard UK plug and socket format, no adaptor required

It is worth noting that extension leads of this type are suitable for occasional and light-duty use. For any fixed or semi-permanent electrical installation in a commercial kitchen, current regulations will generally require a qualified electrician to install additional outlets rather than relying on trailing leads.

If you are unsure whether this lead is appropriate for your intended use, or if you need advice on safe electrical practice in a commercial kitchen setting, the team is happy to help point you in the right direction.

This Status cable reel provides four 13A socket outlets on a 15-metre drum, with a built-in thermal cut out as a safeguard against overloading or overheating. It is a straightforward, practical piece of electrical equipment used across commercial kitchens, prep areas, event catering, and back-of-house maintenance tasks where a nearby socket is not always available.

The drum design guides the cable neatly on and off, reducing wear on the cable over repeated use and keeping it manageable in a busy environment. The thermal cut out provides an automatic safety response if the reel is asked to carry more load than it is rated for — a sensible precaution in environments where multiple appliances may be in use simultaneously.

Typical uses in catering environments include powering temporary equipment during a service, charging equipment in storage areas, running cleaning or maintenance tools, and supporting front-of-house event set-up where fixed sockets are limited.

• Four 13A sockets provide flexibility for multiple low-draw appliances
• Thermal cut out reduces overload risk in busy operational environments
• 15-metre cable gives practical reach across most kitchen and service areas
• Drum winding guides reduce cable kinking and extend service life
• Compact reel format makes storage and transit straightforward

It is worth noting that this reel is suitable for general-purpose use at 13A. It is not intended to power high-draw fixed equipment, and the cable should be fully unwound during use to avoid heat build-up on the drum. If you are unsure whether this reel is appropriate for a specific application, the team is happy to advise.

The Status 12" Oscillating Desktop Fan is a compact, freestanding fan with an antique brass finish, designed for use on countertops, desks, or shelving. It oscillates to distribute airflow across a wider area and offers three speed settings to suit different comfort levels or room conditions.

In a catering environment, this type of fan is most commonly used in staff rest areas, back-of-house offices, reception desks, or front-of-house dining areas where a degree of ambient air movement is needed without the bulk of a floor-standing unit. The antique brass finish makes it presentable enough for customer-facing settings where appearance matters.

• Three speed settings allow airflow to be adjusted to suit the space
• Oscillating head distributes air across a wider area than a fixed fan
• Compact desktop footprint suits counters, shelves, and small surfaces
• Antique brass finish suits front-of-house and hospitality settings
• Simple plug-in operation with no installation required

This is a domestic-grade fan rather than an industrial unit, so it is best suited to lower-demand applications — staff comfort in offices or break rooms, light air movement in dining areas, or seasonal use at a service counter. It is not intended as a ventilation solution for hot kitchens or high-heat cooking environments, where dedicated extraction or heavy-duty circulation fans would be more appropriate.

If you are unsure whether this fan suits your specific setting, or if you need guidance on more robust air movement solutions for a commercial kitchen, feel free to get in touch with the team.

These are 10W bayonet cap (BC/B22) LED GLS bulbs in a warm white colour temperature, sold as a pack of ten. They are a direct replacement for traditional 60W incandescent GLS bulbs and fit standard BC lamp holders commonly found in front-of-house, storage, and back-of-house areas.

Buying in a pack of ten makes straightforward sense for operators managing multiple fittings across a site, reducing the frequency of reordering and keeping a small stock on hand for quick replacements.

If you are unsure whether these are the right specification for your fittings or have questions about lighting requirements across your site, the team is happy to help.