Rubbermaid

The Rubbermaid Heavy Duty Kick Stool is a low-profile step stool designed for commercial environments where staff regularly need to reach shelving, racking, or overhead storage areas safely and quickly. It is a common sight in professional kitchens, storerooms, and dry goods areas where a full stepladder would be impractical during a busy service.

The stool's retractable castors are weight-responsive, meaning they retract automatically when a user steps on the platform, locking the stool in place on the floor. When you step off, the castors lower again, allowing the stool to be kicked or rolled to a new position without picking it up. This makes repositioning quick during a busy shift without creating a trip hazard between uses. Slip-resistant pads on the platform surface provide underfoot grip, which matters in kitchen environments where floors can be damp or greasy.

At 2.69kg, the stool is light enough to move around a kitchen without effort, yet the 158.8kg weight capacity means it is rated well above the load most operators will place on it. The compact footprint keeps it practical in tighter spaces such as walk-in stores or narrow dry goods aisles.

• Weight-responsive castors retract on contact for stable standing
• Compact and easy to reposition between tasks mid-service
• Slip-resistant platform surface suits damp kitchen environments
• Robust enough for daily commercial use with a 158.8kg rated capacity

This is a straightforward piece of kit, but if you are equipping a large site with multiple units or have specific flooring considerations, the team are happy to advise.

The Rubbermaid Step-On pedal bin is a straightforward, well-built waste bin designed for commercial kitchen and food service environments. Operated by a foot pedal, it keeps hands free during service and reduces the risk of cross-contamination at waste points. The tight-fitting lid closes quietly and helps contain food odours — a practical consideration in any enclosed kitchen or food preparation area.

Moulded from polyethylene, the bin is robust enough for consistent daily use and easy to wipe down or hose off at the end of service. The 45.5-litre capacity suits moderate-volume waste disposal needs without requiring constant emptying during a busy shift. It holds a standard bin liner securely and the pedal mechanism is designed to hold up under repeated use without becoming stiff or unreliable over time.

Key practical advantages for kitchen operators include:

• Hands-free operation reduces cross-contamination risk at waste points
• Tight-fitting lid contains food odours during service
• Quiet close mechanism avoids unnecessary noise during busy periods
• Smooth polyethylene surfaces clean quickly and resist staining
• Stable footprint suited to floor placement in prep or service areas

No installation is required. The bin is a freestanding unit that can be positioned wherever waste disposal is needed — prep areas, pass-through zones, or back-of-house. It is not suited to outdoor use or high-temperature environments. For very high-throughput sites generating significant waste volume, a larger-capacity model may be worth considering.

This bin is well suited to small to medium kitchens, café and restaurant prep areas, food retail environments, and anywhere hands-free waste disposal and odour control are priorities. It works equally well front-of-house where a clean, unobtrusive appearance matters.

If you are unsure which size or configuration works best for your site layout, we are happy to help you think it through.

The Rubbermaid Housekeeping Quick Cart in medium size is a mobile cleaning and housekeeping trolley designed for use in hotels, hospitality venues, and larger commercial premises. It provides a structured, portable storage solution that allows housekeeping staff to carry cleaning supplies, linen, and waste across guest areas, corridors, and public spaces without returning to a central store between rooms or zones.

In practice, this cart works well across mid-sized properties where staff need to work efficiently across multiple areas during a shift. The removable caddy offers a useful degree of flexibility — smaller items and cleaning chemicals can be carried directly into a room or space without moving the whole cart, which helps keep work moving at a steady pace during busy periods.

From an operational standpoint, the key advantages are straightforward:

• Removable caddy allows staff to carry supplies directly into rooms without relocating the cart
• Compact medium footprint suits standard corridor widths without obstructing guest traffic
• Lightweight construction at 7.17kg makes it manageable for lone workers throughout a full shift
• Rubbermaid's robust build quality holds up well under the demands of daily commercial use
• Practical capacity of just under 115 litres accommodates a full room's worth of supplies and waste

In terms of practicalities, the cart's dimensions — 533mm high, 363mm wide, and 419mm deep — make it suited to standard service corridors and lift access in most hotel and hospitality environments. It is worth confirming access widths in your specific premises before ordering, particularly in older buildings with narrower corridors or doorways.

This model is well suited to small-to-medium hospitality operations, care homes, and commercial cleaning teams. For larger properties or high-turnover environments where greater capacity is needed across longer shifts, a higher-capacity model in the same range may be worth considering.

If you are unsure which size best fits your operation, our team is happy to talk it through with you.

The Rubbermaid Step-On pedal bin is a straightforward, hands-free waste bin designed for commercial kitchen and food service environments. Operated by a foot pedal, the lid opens and closes without any hand contact, which is an important consideration in kitchens where cross-contamination risk needs to be managed at every touchpoint. The tight-fitting lid keeps odours contained between waste collections, which makes a practical difference in smaller kitchens or preparation areas where air circulation may be limited.

Constructed from moulded polyethylene, the bin is robust enough for daily commercial use and straightforward to wipe down as part of routine cleaning. The material resists staining and does not corrode, which matters in environments where moisture, cleaning chemicals, and food waste are constant factors. At 68 litres, this is a practical capacity for a busy preparation or back-of-house area where waste accumulates quickly during service.

• Hands-free foot pedal operation reduces cross-contamination risk
• Tight-fitting lid helps contain food odours between collections
• Durable polyethylene construction withstands commercial cleaning routines
• Beige finish suits front-of-house or customer-facing areas where a neutral colour is preferred
• No complex parts — straightforward to maintain and replace liners quickly

This size is well suited to kitchen prep areas, front-of-house service stations, or staff areas with moderate waste output. For higher-traffic kitchens generating larger volumes of waste, a higher-capacity model in the same range may be more appropriate to reduce how often liners need changing during a shift.

If you are fitting out a new kitchen or replacing several waste bins across a site and want to talk through capacity and placement, the team is happy to help you work through the options.

The Rubbermaid Step-On Pedal Bin is a hands-free waste bin operated by a foot pedal, designed for continuous use in commercial kitchen and food service environments. At 68 litres, it sits in the larger end of the step-on range and is well suited to busy service areas where waste accumulates quickly and frequent emptying is disruptive.

The tight-fitting lid helps contain food odours between empties, which matters in kitchens where waste bins are positioned close to prep areas. The foot pedal mechanism keeps hands free and reduces cross-contamination risk, making it a practical fit for HACCP-conscious operations. The moulded polyethylene construction is straightforward to wipe down and resistant to the knocks and moisture typical of a working kitchen environment.

The red colouring makes this bin a natural choice for kitchens operating a colour-coded waste or hygiene system, helping staff identify the correct bin quickly during a busy service.

• Hands-free operation reduces cross-contamination risk at point of disposal
• Tight-fitting lid contains odours between waste collections
• Red finish supports colour-coded waste management systems
• Polyethylene body withstands daily commercial kitchen use
• 68-litre capacity reduces the frequency of emptying during service

It is worth considering where the bin will be positioned — the footprint is reasonably substantial, so it suits back-of-house areas with adequate floor space rather than confined prep corners. For very high-output kitchens generating large volumes of waste rapidly, a larger bin or multiple units may be a more practical solution.

If you are putting together a colour-coded system across several areas or are unsure which capacity suits your workflow, the team is happy to help you work through the options.

The Rubbermaid Cube Truck is a large-capacity mobile container moulded from polyethylene, designed for the bulk movement and temporary storage of materials in commercial food service, hospitality, and institutional environments. It is a straightforward workhorse piece of kit — no electrics, no mechanics — built to move significant volumes of linen, waste, dry goods, or general back-of-house material with minimal effort and fewer journeys.

In practice, the value of a truck at this capacity is felt most during busy turnaround periods — post-service clear-downs, linen changes in hotels, or restocking runs in large catering operations. The moulded polyethylene body handles knocks and hard use without deteriorating, resists moisture, and cleans down quickly, which matters in environments where hygiene standards are closely monitored. The integrated handle gives operators reasonable control when manoeuvring through corridor junctions or around equipment, though it is worth noting that a fully loaded truck of this size takes some physical effort to manage on inclines or uneven flooring.

Key practical advantages for operators include:

• 400-litre capacity significantly reduces journey frequency during bulk handling tasks
• Moulded polyethylene resists impact, moisture, and general back-of-house wear
• Smooth internal surfaces are straightforward to wipe down or hose off
• Integrated handle supports controlled movement in confined areas
• Black finish is practical for general-purpose use in high-soil environments

No utilities or installation are required. The main practical consideration is footprint — both in use and in storage. It is worth checking corridor widths and doorway clearances before ordering, particularly if the truck will need to pass through fire doors or service lifts when loaded.

This truck suits hotel, contract catering, large restaurant, or institutional operations that regularly handle bulk material movements. Smaller sites with limited storage or narrower back-of-house access may find a lower-capacity model more practical day to day.

If you would like to talk through whether this capacity and configuration fits your site, the team is happy to help before you place an order.

These refill cartridges are designed specifically for use with Rubbermaid AutoFoam touch-free dispensers. Each 1.1Ltr cartridge delivers a foamed soap format, which distributes product more evenly across the hands and typically uses less soap per wash than a standard liquid format — a practical consideration in high-traffic washrooms where consumption adds up quickly.

The soap carries a light perfume and includes moisturising agents, which helps maintain hand condition in environments where staff or guests are washing frequently throughout the day. For front-of-house or guest-facing washrooms in hotels and spas, presentation and scent both matter, and this formulation is positioned accordingly.

Each pack contains four cartridges, making it a convenient stock unit for sites that want to reduce the frequency of individual orders. Refill replacement is straightforward — the cartridge system is designed for quick changeover with minimal contact with the product, which supports hygiene in food-safe and guest-facing environments alike.

These refills are compatible with Rubbermaid AutoFoam dispensers only. If you are not already using AutoFoam units, you will need to source the matching dispenser separately before ordering these cartridges. It is worth confirming compatibility if you are running a mixed estate of dispensers across a larger site.

Well suited to hotels, spas, leisure facilities, and any commercial operation where washroom presentation and consistent soap supply are priorities. If you need a higher-volume format or a fragrance-free option for food production or clinical environments, it is worth discussing alternatives before ordering.

If you are equipping a larger site or want to check compatibility with your existing dispensers, feel free to get in touch — it is easier to confirm the right product before an order than after.

The Rubbermaid Cube Truck is a large-capacity moulded polyethylene transport truck designed for commercial waste collection, linen handling, and bulk materials movement. The enclosed cube design conceals loads during transit without compromising usable capacity, which makes it a practical choice in front-of-house areas or anywhere presentation matters alongside function.

In busy kitchen and facilities environments, these trucks earn their place through straightforward durability. The polyethylene construction resists impacts, moisture, and the general punishment of a working back-of-house. The integrated handle design gives operators good control when moving loaded trucks through tight service corridors or across uneven surfaces — a small detail that matters when a truck is carrying a full load at the end of a service.

Practically, the Cube Truck suits a range of operational tasks beyond waste:

• Bulk waste collection from multiple kitchen stations
• Linen and laundry transport in hotels and contract catering
• Porterage of dry goods or disposables between storage and service areas
• Post-event clear-down in banqueting or event catering

There are no electrical or water connections required. Placement considerations are minimal — ensure access routes and lift dimensions are checked before ordering, as the external footprint of a 300-litre truck is substantial. For smaller kitchens or tighter service corridors, a lower-capacity model may be a more practical fit. For high-volume operations running multiple collection points simultaneously, it is worth considering whether a fleet of smaller trucks or a single larger unit better suits the workflow.

This truck is well suited to contract caterers, hotel kitchens, event venues, and larger food production sites where bulk handling is a daily requirement rather than an occasional task.

If you are unsure which size or configuration works best for your site layout, we are happy to talk it through.

These refill cartridges are designed for use with the Rubbermaid AutoFoam dispenser system and contain a perfumed antibacterial foam soap formulated to kill 99.9% of harmful bacteria. The foam format delivers a controlled dose per activation, reducing waste compared with conventional liquid soap dispensers.

In food preparation and catering environments, consistent hand hygiene at wash stations is a routine compliance requirement. The foam formula rinses away quickly, which suits busy service periods where staff need to move through handwashing efficiently without excessive time at the sink. The antibacterial action is suitable for meeting food hygiene standards in commercial kitchens, as well as healthcare and hospitality settings where hygiene protocols are closely monitored.

• Kills 99.9% of harmful bacteria
• Foam format reduces per-use soap consumption
• Perfumed formula leaves hands refreshed
• Compatible with Rubbermaid AutoFoam wall-mounted dispensers
• Supplied as four 1.1Ltr cartridges per pack

These cartridges are a direct replacement for AutoFoam dispensers already installed. They are not compatible with other dispenser systems, so it is worth confirming your existing dispenser model before ordering. The four-pack format is practical for sites running multiple wash stations or where refill frequency is high.

Well suited to commercial kitchens, catering operations, and food service environments of most sizes. If you are looking to set up new hand hygiene stations from scratch rather than replace existing refills, it is worth speaking with the team about the full AutoFoam dispenser and refill range.

The Rubbermaid Quick Cart is a compact mobile cart designed for housekeeping and facilities staff who need to move cleaning supplies, linens, or consumables efficiently around a building. The small size makes it practical in tighter corridors and service areas where a full-sized linen trolley would be awkward to manoeuvre.

In day-to-day use, the cart is built to withstand repeated loading and frequent movement across hard flooring. The heavy-duty construction holds up well under regular commercial use, and the design is tidy enough for use in guest-facing areas such as lobbies and corridors without looking out of place.

The removable caddy is a practical touch that adds flexibility to how the cart is used — it can be detached and carried directly into a room or space, reducing the need to wheel the full cart through doorways repeatedly. Key practical points include:

• Removable caddy for room-by-room access without moving the full cart
• Compact footprint suited to narrow service corridors
• Durable construction for sustained daily use
• Clean, low-profile design appropriate for guest-facing environments

As a smallware item, there are no utility connections or installation requirements. It is worth considering whether the small size provides sufficient capacity for your typical restocking runs — for higher-volume sites or larger floor areas, a larger cart configuration may reduce the number of trips required.

This cart is well suited to hotels, serviced apartments, care homes, and similar hospitality or facilities environments where staff need a reliable, manoeuvrable cart for routine duties. If you are unsure which size or configuration would work best for your operation, the team is happy to help you work through the options.

The Rubbermaid Quick Cart is a mobile storage and transport cart designed for housekeeping, facilities, and front-of-house teams who need to move equipment, supplies, or waste efficiently across large floor areas. The large format gives staff a practical carrying platform for bulkier loads, while the black finish suits environments where a tidier, more presentable appearance is required.

In operational terms, this cart is built to withstand the kind of repeated daily use common in hotels, hospitals, conference venues, and large hospitality sites. The heavy-duty construction handles the knocks and loading pressures of a busy shift without the frame distorting or the wheels losing manoeuvrability over time.

The removable caddy is a particularly useful feature for staff working across multiple areas — it allows smaller items to be separated from the main load and carried or repositioned independently without disturbing the rest of the cart's contents. This kind of flexibility helps reduce unnecessary trips and keeps workflows moving during busy periods.

• Removable caddy for flexible load separation and portability
• Heavy-duty frame suited to repeated daily use in demanding environments
• Large capacity for bulkier housekeeping or facilities loads
• Black finish suits guest-facing and public areas
• Stable wheeled base for easy manoeuvring across floor surfaces

It is worth considering the physical footprint of the large model against your storage areas and service corridors before ordering — where space is tighter, a compact or medium-format cart may be a better fit operationally.

If you are unsure whether the large format is right for your site, or whether a different configuration would suit your team's workflow better, we are happy to talk it through.

The Rubbermaid X-Cart Frame is a collapsible utility cart frame designed for use in commercial catering, hospitality, and facilities environments. The frame supports a 300-litre capacity and is built to accept compatible X-Cart covers and liners, making it a practical option for transporting and storing bulk items such as linen, waste, dry goods, or service supplies across a site.

The collapsible design is one of its more useful qualities in a working environment. When not in use, the frame folds down to a compact footprint, which matters in kitchens, back-of-house corridors, and storerooms where space is at a premium. Despite the lightweight construction, Rubbermaid builds these frames for repeated daily use — they hold up well in the kind of continuous service conditions typical of hotels, contract catering operations, and large-scale hospitality venues.

From an operational standpoint, the key advantages are straightforward:

• Collapsible frame reduces storage footprint when carts are off the floor
• Lightweight construction makes the cart easy to manoeuvre when loaded
• Compatible with X-Cart covers for enclosed transport of linen or waste
• Suited to multi-department use across large sites
• Robust enough for continuous back-of-house use

There are no specialist installation requirements — this is a free-standing, manually operated cart. The main practical consideration is confirming the correct cover or liner is ordered separately if enclosed transport is needed; the cover is sold as an accessory and is not included with the frame.

This cart is well suited to hotels, large restaurants, contract caterers, and facilities teams that need a reliable, stackable transport solution. For sites with significantly higher volume or weight requirements, heavier-duty platform or shelf trolley options may be worth considering.

If you are unsure whether this cart suits your specific application or want to discuss cover compatibility, the team is happy to help before you order.

This starter pack from Rubbermaid brings together a wall-mounted manual foam soap dispenser and two 800ml unperfumed foam hand wash refills, both carrying the EU Ecolabel certification. It is a straightforward, self-contained solution for getting a hand hygiene station up and running without needing to source the dispenser and soap separately.

Foam format soap is commonly used in commercial kitchens and food service environments because it disperses product more evenly across the hands, tends to use less soap per wash cycle than liquid alternatives, and leaves less residue on surfaces around the dispenser. In a busy prep kitchen or back-of-house washroom, that can make a modest but genuine difference to both hygiene compliance and day-to-day tidiness.

Practical points worth noting for operators setting this up:

• Wall-mounted manual operation — no batteries or power supply required
• Unperfumed refills suitable for food handling environments
• Ecolabel-certified soap for operators with sustainability requirements
• Two refills included, reducing the need for an immediate separate order
• Straightforward refill mechanism reduces staff time spent on changeovers

This pack is well suited to smaller sites or operators equipping a single handwash station — a café, small restaurant, or food prep unit, for example. For larger sites with multiple washroom or handwash points, it is worth considering whether a bulk-refill or higher-capacity dispenser format would be more practical in the longer run.

If you are fitting out several stations or want to discuss soap dispenser options alongside broader kitchen hygiene equipment, the team is happy to help point you in the right direction.

The Rubbermaid CirculAir 90 is a passive air freshener dispenser designed for commercial washrooms, corridors, reception areas, and similar spaces where consistent, low-maintenance odour control is needed. It operates using fuel cell technology rather than batteries or aerosol mechanisms, which means no moving parts, silent running, and no requirement for an electrical connection.

In a commercial setting, the practical advantage of a fuel cell system is reliability. There are no batteries to replace on a schedule, no mechanisms to jam, and no noise — which matters in customer-facing areas. The dispenser releases fragrance at a controlled, timed rate, maintaining a consistent level rather than the peaks and gaps you get with spray-based systems. Refill life runs to several weeks depending on the output setting selected, which suits most commercial cleaning regimes.

A few points worth noting for operators:

• Orientation-independent mounting — wall, ceiling, or under-surface installation all viable
• Adjustable output setting to match room size and ventilation
• No batteries or electrical supply required
• Compatible fragrance refills available separately
• Also available in a chrome finish for smarter front-of-house environments

The dispenser is well suited to back-of-house washrooms, staff facilities, and moderate-traffic customer toilets. For high-footfall venues or larger spaces where odour control is a more significant operational concern, it is worth considering whether a higher-output or multi-unit approach would be more appropriate.

If you are unsure how many units a site requires or which fragrance suits a particular environment, the team is happy to help you work through it.

The Rubbermaid CirculAir 90 Passive Air Care Refill in Citrus Mix is a replacement fragrance cartridge designed for use with the CirculAir 90 dispenser. It works without batteries or aerosol propellant, relying on passive airflow through the dispenser unit to distribute fragrance steadily throughout the day.

In commercial settings, consistent background odour control is a practical concern rather than an afterthought — particularly in washrooms, changing areas, and back-of-house corridors that receive heavy footfall during service periods. A passive system like this avoids the peaks and troughs associated with timed aerosol units, providing a more even result without requiring staff to monitor or adjust settings.

• No batteries or propellant — no ongoing consumable cost beyond the refill itself
• Continuous passive fragrance release throughout the day
• Citrus Mix fragrance suitable for washroom and utility areas
• Straightforward refill replacement with no tools required
• Compatible with the CirculAir 90 dispenser unit

This refill is only compatible with the Rubbermaid CirculAir 90 dispenser. It will not fit other dispenser formats, so it is worth confirming which unit is installed before ordering. For sites with multiple washrooms or high-traffic facilities, it is sensible to keep a small stock of refills on hand to avoid any gap in cover.

This product is well suited to commercial washrooms, staff facilities, and front-of-house areas in hospitality, healthcare, and foodservice environments where low-maintenance odour control is a priority. If you are setting up a new installation or are unsure which dispenser or fragrance suits your space, the team is happy to point you in the right direction.

The Rubbermaid AutoFoam is a wall-mounted, touch-free foam soap dispenser designed for commercial hand-washing stations. It dispenses a measured dose of foaming soap automatically, without any contact from the user, which makes it a practical choice for food preparation and catering environments where hand hygiene compliance matters.

In a busy kitchen, a touch-free dispenser does two useful things: it removes a common contact point that can contribute to cross-contamination, and it helps encourage staff to wash their hands consistently by making the process quick and frictionless. The foam format also tends to lather readily, which can support more thorough washing compared with standard liquid soap.

• Touch-free operation removes a surface contact point at the sink
• Foam format encourages fuller lather with each dose
• Measured dispensing helps manage soap consumption over time
• Wall-mounted design keeps the sink area clear and easy to clean around
• Suits staff washbasins in kitchens, prep areas, and front-of-house facilities

Installation is straightforward — the unit mounts to a wall near the washbasin and runs on batteries, so there is no requirement for an electrical connection at the sink point. Refill cartridges are specific to the AutoFoam system, so it is worth confirming ongoing cartridge availability before committing across multiple sites or wash stations.

This dispenser is well suited to commercial kitchens, food service operations, and hospitality venues where hand hygiene standards need to be maintained consistently. For higher-footfall locations or sites with a larger number of wash stations, it is worth considering whether a higher-capacity format would reduce refill frequency.

If you are specifying dispensers across a new or refurbished kitchen and want to talk through positioning or volume requirements, the team is happy to help.

The Rubbermaid Configure recycling bin is a freestanding waste segregation unit finished in green and pre-labelled for mixed recycling. It is designed for public-facing and back-of-house use in commercial environments where consistent waste sorting and presentable appearance both matter.

In practice, these bins are commonly deployed in hotel lobbies, airport terminals, shopping centres, office buildings, and similar high-footfall locations where bins are in near-constant use and need to hold up without looking worn. The powder-coated steel construction handles the kind of repeated daily contact that lighter plastic units struggle with over time, and the finish resists the scuffs and marks that accumulate in busy circulation areas.

From an operational standpoint, the Configure range offers a few practical advantages worth considering:

• Pre-fitted mixed recycling label reduces ambiguity for users and supports waste compliance
• Green colour coding follows standard recycling convention, making it immediately recognisable
• Durable steel construction maintains appearance under frequent daily use
• Suitable for both public areas and back-of-house recycling stations
• 87-litre capacity reduces how often staff need to empty and reline the bin during a shift

One consideration worth noting: units of this size and construction are intended for static placement rather than frequent repositioning. If your waste management layout is likely to change regularly, or if you need a more mobile solution, it is worth discussing alternatives before purchasing.

This bin is well suited to venues that need a presentable, hardwearing recycling station in public or semi-public areas. If you are specifying multiple units across a larger site or want to match other Configure configurations, we are happy to talk through what works best for your layout.

The Rubbermaid Configure recycling bin is a standalone waste and recycling unit intended for public-facing and back-of-house commercial environments. It comes supplied with a mixed recycling label and is finished in green to support clear stream separation where multiple bins are deployed side by side. The heavy-gauge galvanised steel construction with a powder-coated finish gives it a more considered appearance than standard plastic bins, which tends to matter in environments where presentation is part of the brief.

In practice, this type of unit earns its keep in facilities where waste stations are visible to guests or staff throughout the day — hotel lobbies, airport terminals, shopping centres, office corridors and similar high-footfall areas. The robust construction means it holds up well under continuous use without the visible wear that lighter bins tend to show quickly in busy environments.

• Colour-coded green finish supports clear recycling stream separation
• Mixed recycling label included as standard for immediate deployment
• Powder-coated steel construction resists everyday knocks and surface wear
• Suitable for both public-facing areas and back-of-house waste stations
• Compatible with other Configure units for consistent multi-stream setups

It is worth considering where this bin will be positioned and how frequently it will need emptying relative to your waste volumes. The 57-litre capacity suits moderate-footfall zones well; very high-traffic areas may benefit from a larger capacity unit or more frequent servicing intervals. The Configure range is designed to work as a coordinated system, so if you are specifying multiple streams or locations, it is worth planning the full setup together.

If you are fitting out a waste station across several areas or need guidance on how many units to deploy for a given footfall, the team is happy to talk it through before you order.

The Rubbermaid Configure recycling bin is a freestanding waste and recycling container designed for use in public-facing and back-of-house commercial environments. This version is finished in red and supplied with a plastic recycling label, making it straightforward to integrate into a colour-coded waste segregation system.

Built from heavy-gauge galvanised steel with a powder-coated finish, the Configure range is designed to withstand the demands of busy sites — including hotels, shopping centres, airports, offices, and commercial catering environments — without looking worn or neglected after extended use. The construction holds up well under frequent handling and regular emptying cycles, which matters in high-footfall locations where bins are accessed throughout the day.

From an operational standpoint, the bin supports a few practical advantages worth noting:

• Colour-coded red finish simplifies waste stream identification at a glance
• Plastic recycling label provides clear guidance for users without additional signage
• Robust steel construction resists denting and surface wear in busy areas
• Suitable for placement in both public areas and staff-facing zones
• Consistent appearance supports a tidy, professional environment presentation

At 57 litres, this bin suits moderate-volume recycling needs. It works well as part of a multi-stream waste station rather than as a standalone high-volume solution. Sites generating significant recycling output — such as large event venues or high-volume catering operations — may find a larger-capacity unit more practical to avoid frequent emptying.

If you are specifying waste management across multiple zones or need guidance on matching bin sizes and configurations to your site layout, the team is happy to help you work through the options.

The Rubbermaid Configure is a heavy-duty recycling bin designed for busy public and commercial environments. Constructed from heavy-gauge galvanised steel with a powder-coated finish, it is built to hold up under constant daily use without showing the wear that lighter-weight alternatives tend to accumulate quickly. The red colour coding and printed plastic recycling label make waste stream identification straightforward for both staff and visitors.

In practice, this bin suits locations where appearance matters as much as function — hotel lobbies, airport concourses, shopping centres, office buildings, and similar high-footfall settings. The 87-litre capacity means it handles a reasonable volume between collections without needing constant attention, which is a practical consideration in facilities where cleaning or facilities teams are stretched across large floor areas.

From an operational standpoint, a few things are worth noting:

• Colour-coded red body supports clear, consistent waste segregation across a site
• Powder-coated steel finish resists denting, scratching and general surface wear
• Plastic recycling label is replaceable if signage requirements change
• Open-top or compatible lid configurations allow flexible placement
• Suited to indoor use in temperature-controlled environments

It is worth considering whether the bin will be used in a wet or outdoor area, as the steel construction, while durable, is better suited to covered indoor locations. For higher-volume collection points or outdoor settings, a different material or larger-capacity format may be more appropriate.

If you are specifying waste management across a multi-zone site and want to discuss capacity, colour coding, or how this fits alongside other bin formats, the team is happy to help you work through the options.

The Rubbermaid Configure recycling bin is a free-standing, front-access waste receptacle designed for high-footfall environments where appearance and practicality both matter. This version is finished in green and labelled for mixed recycling, making stream identification straightforward for staff and visitors alike.

Built from heavy-gauge galvanised steel with a powder-coated finish, the Configure is well suited to locations that see consistent daily use — hotel lobbies, office receptions, airport terminals, shopping centres, and similar public-facing spaces. The construction holds up to regular emptying cycles and the occasional knock without the finish deteriorating quickly, which matters in settings where equipment is visible to guests or customers.

From an operational standpoint, the key practical advantages are:

• Clear stream labelling reduces contamination and simplifies waste audits
• Robust steel construction withstands heavy daily use without visible wear
• Powder-coated finish is straightforward to wipe down and maintain
• Consistent appearance works well when bins are deployed in multiples across a site
• Front-access opening suits placement against walls or in corridors

It is worth considering that a 125-litre capacity will suit moderate-traffic areas reasonably well, but very busy locations — large event venues or high-volume food courts, for instance — may find the bin requires emptying more frequently than is practical. In those settings, a higher-capacity unit or a bank of multiple containers may be a more efficient arrangement.

This bin is best suited to managed facilities with a consistent recycling programme already in place, where clear labelling and a professional appearance are as important as durability. If you are fitting out a site with multiple waste streams or need guidance on the right combination of units, the team is happy to help you work through the options.

The Rubbermaid Configure recycling bin is a free-standing waste sorting unit designed for busy public-facing environments. This 57-litre version comes in green with a glass recycling label, making it straightforward for staff and visitors to identify the correct stream without signage elsewhere. The heavy-gauge galvanised steel construction with a powder-coated finish is built to hold up under the kind of repeated daily contact that quickly degrades lighter-duty alternatives.

In practice, these bins are commonly used in hotels, office buildings, shopping centres, airports, and similar facilities where appearance matters as much as function. The powder-coated finish resists surface scuffing and maintains a presentable look over time, which is a practical consideration in front-of-house or guest-facing areas where worn or tatty bins become a visible problem.

Key practical advantages include:

• Clear colour-coding and labelling reduces contamination of recycling streams
• Steel construction withstands daily use without warping or cracking
• Powder-coated finish maintains appearance in high-footfall areas
• Freestanding design requires no fixings or installation
• Part of a wider Configure range, allowing consistent presentation across a site

Because the Configure range is modular, it is worth considering how many units a site needs and whether a mix of stream labels would be appropriate before ordering. For very high-footfall locations, higher-capacity models within the range may be worth exploring.

If you are fitting out a facility and want to talk through stream labelling, bin placement, or volume requirements, the team is happy to help you work through the options.

The Rubbermaid Configure is a freestanding recycling bin designed for busy public-facing and back-of-house environments. This 57-litre unit comes labelled for landfill waste and is finished in black, making it practical for facilities where waste segregation needs to be clear and consistent without looking out of place.

Built from heavy-gauge galvanised steel with a powder-coated finish, the Configure is well suited to environments that see continuous daily use — hotel lobbies, office receptions, airport terminals, shopping centres, and similar high-footfall settings. The construction holds up to repeated handling and cleaning without the finish deteriorating in the way that cheaper plastic alternatives often do.

From an operational standpoint, the key advantages are straightforward:

• Clear landfill labelling reduces contamination of recycling streams without staff intervention
• The powder-coated steel finish wipes down easily and resists marking under regular use
• A consistent appearance across a site is straightforward to achieve where multiple units are deployed
• The upright, slim footprint suits corridors, breakout areas, and front-of-house spaces without obstructing flow

It is worth noting that this unit is designed primarily for public or office environments rather than commercial kitchen waste streams, where heavier-duty bins with pedal operation or larger capacities are often more appropriate. For kitchen or back-of-house use, it is worth considering whether a higher-capacity or more robust option would better suit the volume and type of waste being handled.

If you are fitting out a facility with multiple waste stations or need guidance on matching bin type to waste stream, feel free to get in touch — it is often worth a quick conversation before ordering in quantity.

The Rubbermaid Configure recycling bin is a large-capacity waste and recycling container designed for busy commercial environments. This version carries a landfill label and is finished in black, making it straightforward to deploy as part of a colour-coded or labelled waste segregation system. The heavy-gauge galvanised steel construction with a powder-coated finish gives it considerably more resilience than standard plastic bins, which matters in settings where bins are moved frequently, emptied multiple times a day, or exposed to general wear from staff and the public.

In practice, this bin suits locations with consistent high footfall — hotel lobbies, airport terminals, shopping centres, office atriums, and similar front-of-house areas where waste stations need to look presentable as well as function reliably. The 125-litre capacity means less frequent emptying on busy sites, which helps with cleaning workflows and reduces the chance of overflow during peak periods.

• Robust steel construction holds up to repeated daily use without visible deterioration
• Powder-coated finish resists knocks and maintains appearance in public-facing areas
• Clear landfill labelling supports waste segregation compliance
• Large capacity reduces emptying frequency during busy service periods
• Designed to sit alongside matching Configure units for a coordinated waste station

One practical consideration: the steel construction adds weight compared to equivalent plastic bins, so placement is worth thinking through before installation — these are not bins that will be moved around casually. They are better suited to fixed or semi-fixed waste stations than to kitchens where bins are repositioned throughout the day.

This bin is well suited to larger hospitality, retail, and corporate facilities that want a durable, presentable waste solution. For smaller back-of-house areas or kitchens where lighter, more mobile containers are needed, a different format may be more practical. If you are specifying a full waste station or need guidance on matching units, the team is happy to talk through the options.

The Rubbermaid Configure range is a line of heavy-gauge galvanised steel recycling and waste bins designed for high-footfall commercial environments. This 87-litre model comes fitted with a landfill label and finished in black with a powder-coated surface, making it well suited to front-of-house and back-of-house settings where both appearance and durability matter.

In busy environments — hotels, airport terminals, shopping centres, office buildings — waste bins take a considerable amount of daily punishment. The Configure's steel construction holds up well under repeated use without denting or fading in the way plastic alternatives often do, and the powder-coated finish helps maintain a presentable appearance over time without requiring much upkeep.

From an operational standpoint, this bin offers a few practical advantages worth noting:

• Clear landfill labelling supports waste segregation compliance without additional signage
• The steel construction resists impact damage in high-traffic areas
• Powder-coated finish wipes down easily and resists surface marking
• The upright format fits neatly alongside other Configure units for a consistent, co-ordinated appearance
• Suitable for both staffed and public-access waste stations

It is worth considering that at 87 litres, this bin is well suited to moderate-traffic areas or as part of a multi-unit recycling station. Very high-volume locations — large food courts or busy transport hubs — may find they need either larger-capacity units or more frequent servicing intervals. The Configure range is designed to be used in coordinated sets, so if you are planning a multi-stream waste station, it is worth thinking through the number of streams and daily waste volumes before committing to a configuration.

This bin is a practical choice for facilities managers, hotel operators, office building managers, and anyone responsible for maintaining a tidy, compliant waste management setup in a public or semi-public space. It is not a catering-specific product, but it works well in hospitality environments where the dining or lounge areas are visible to guests.

If you are setting up a waste station across multiple locations or want to work through the right combination of units for your site, we are happy to help you think it through.

The Rubbermaid Configure recycling bin is a large-capacity, freestanding waste and recycling container designed for high-footfall commercial environments. This version carries a red finish and a plastic recycling label to support clear stream segregation — making it straightforward for staff and visitors to identify the correct bin at a glance.

In busy environments such as hotel lobbies, airports, shopping centres, office buildings, and food courts, consistent waste segregation depends on bins that are visible, clearly labelled, and robust enough to handle repeated daily use without looking tired. The Configure range is designed with that in mind — the finish holds up well in public-facing areas where appearance matters alongside function.

Practically, the bin works well as part of a coordinated recycling station. Using matching units in different colours or with different labels across the same space creates a coherent system that encourages correct sorting without the need for constant staff intervention. Key operational advantages include:

• Clear colour-coding and labelling to reduce contamination across waste streams
• Large capacity suited to high-volume public areas between collection rounds
• Robust construction that maintains its appearance under regular use
• Freestanding design with no fixings required for flexible placement
• Compatible with other Configure units for a coordinated station setup

This bin is well suited to facilities management teams, hotel operators, and contract caterers managing waste in public or back-of-house areas where segregation compliance and presentation both matter. For very high-volume locations or where more streams need separating, larger or multi-stream configurations may be worth considering.

If you are specifying a full recycling station or need advice on matching units, we are happy to help you work through the options.

The Rubbermaid Configure recycling bin is a free-standing waste separation unit designed for busy public-facing and back-of-house environments. This version is finished in green and supplied with a glass recycling label, making it straightforward to integrate into a colour-coded waste stream without additional signage. The 87-litre capacity suits locations with moderate to high footfall where collections are made regularly throughout the day.

Built from heavy-gauge galvanised steel with a powder-coated finish, the Configure range is designed to hold up under the kind of daily use typical in hotels, catering facilities, airports, shopping centres, and large office environments. The robust construction means it maintains a presentable appearance over time, which matters in customer-facing spaces where appearance is part of the brief.

From an operational standpoint, the key practical advantages are:

• Clear glass recycling labelling supports staff and visitor compliance without guesswork
• Colour-coded green finish integrates into existing waste segregation schemes
• Durable steel construction resists denting and wear from regular emptying
• Suitable for both front-of-house presentation areas and service corridors
• Straightforward to clean and maintain as part of routine waste management routines

Installation requires no fixings or utilities — the unit is free-standing and can be positioned wherever waste segregation is needed. It is worth considering floor surface and positioning carefully in high-traffic zones to ensure it remains stable and accessible for both users and housekeeping staff.

This bin is well suited to medium-to-large hospitality, leisure, and commercial catering sites that operate a segregated recycling policy and need units that will hold up to constant use without looking tired. For sites requiring a higher-capacity solution or a different waste stream configuration, there are alternative options worth considering.

If you are specifying bins across a larger site or building a waste management scheme from scratch, our team is happy to help you work through the right combination of units and capacities.

The Rubbermaid Configure recycling bin is a heavy-gauge, powder-coated steel waste container designed for consistent use in busy public and commercial environments. This version is finished in green and fitted with a glass recycling label, making it straightforward for staff and visitors to identify the correct stream at a glance. At 125 litres, it offers a practical capacity for locations that generate a reasonable volume of glass waste without requiring constant emptying.

Built from galvanised steel with a powder-coated finish, the Configure range is designed to hold its appearance under daily use in demanding settings — hotels, airports, shopping centres, office buildings, and similar high-footfall facilities. The construction resists denting and surface wear better than standard plastic alternatives, which matters in environments where bins are handled frequently by cleaning teams.

From an operational standpoint, the key advantages are:

• Clear colour-coding and labelling supports accurate waste segregation
• Durable steel construction withstands repeated daily handling
• Consistent styling makes it easy to deploy across multiple areas of a site
• The 125-litre capacity suits moderate-volume glass waste streams
• Powder-coated finish retains a presentable appearance in public-facing spaces

It is worth considering placement carefully. Glass waste is heavier than general recycling, so positioning the bin close to the point of disposal — a bar area, hospitality suite, or catering space — reduces handling effort and the risk of overfilling. For sites with very high glass volumes, a larger-capacity unit may be more practical to manage.

This bin is well suited to hotels, licensed venues, corporate offices, airports, and any site operating a structured recycling programme that needs to present a consistent, tidy appearance. If you are fitting out multiple areas or need to match this bin with other waste streams in the Configure range, it is worth speaking with us to confirm you have the right configuration before ordering.

The Rubbermaid Configure is a large-capacity recycling bin intended for commercial and public-facing environments where waste volumes are high and presentation matters. This version carries a food waste label and is finished in brown, making it straightforward to integrate into a colour-coded waste segregation system — a requirement in many commercial kitchens and catering facilities under current food waste guidance.

The bin is built from heavy-gauge galvanised steel with a powder-coated finish, which holds up well against the knocks and frequent emptying cycles typical in busy back-of-house or front-of-house settings. The 125-litre capacity makes it practical for sites generating significant food waste between collections, reducing how often staff need to attend to it during a service period.

In practical terms, the Configure suits environments where both durability and a reasonably presentable appearance are expected — hotel operations, contract catering kitchens, staff canteens, and large food service facilities. It works equally well front-of-house in areas such as dining rooms or service corridors where a more robust look than a standard plastic bin is appropriate.

• Brown finish and food waste labelling supports clear waste stream identification
• Heavy-gauge steel construction withstands regular use in demanding environments
• Large 125-litre capacity reduces interruption to staff during service
• Powder-coated finish is easier to wipe down than raw metal

It is worth confirming that the bin's footprint and lid configuration fit your specific waste management workflow before ordering, particularly if you are deploying several units across a site with defined collection routes. If you are setting up a full waste segregation system and need guidance on capacity or configuration, we are happy to help.

The Rubbermaid Configure recycling bin is a heavy-duty waste and recycling container designed for consistent use in busy commercial environments. The brown colour coding and printed food waste label make waste stream identification straightforward for both staff and visitors, reducing contamination and keeping recycling sorted correctly from point of disposal.

Built from heavy-gauge galvanised steel with a powder-coated finish, this bin is a practical choice for high-footfall locations where containers take repeated daily use. The construction holds up well in environments such as hotel lobbies, office canteens, shopping centres, and airport concourses, where appearance and durability both matter. The Configure range is designed so that individual units can be grouped together, which makes it straightforward to create a multi-stream recycling station in a single location.

From an operational standpoint, this bin suits facilities where a clean, consistent waste management setup is needed without constant maintenance or replacement. Key practical points include:

• Colour-coded brown finish aids correct waste stream sorting by staff and users
• Printed food waste label reduces reliance on additional signage
• Powder-coated steel finish resists marking and is straightforward to wipe down
• Compatible with other Configure units for multi-stream recycling stations
• Well suited to front-of-house and public-facing areas where appearance is a consideration

This bin works well for medium-volume food waste streams in facilities with consistent daily footfall. For higher-volume or back-of-house applications, a larger capacity unit may be more appropriate. If you are setting up a multi-stream waste station across a larger site, it is worth thinking through stream volumes and bin placement before committing to quantities.

If you are unsure which configuration or capacity best fits your site, the team is happy to talk it through with you.