San Jamar Lid Dispensers

The San Jamar L2410 is an in-counter lid dispenser designed for hot drink lids in the 95–101mm size range. It mounts flush into a counter surface and presents lids one at a time through a rubber gasket mechanism, so customers or staff only contact the leading edge of the lid rather than the stack as a whole. It is part of San Jamar's EZ-Fit range, which uses interchangeable gaskets to accommodate different lid profiles within a compatible size bracket.

In busy beverage service environments — coffee shops, quick service restaurants, food courts, and staff canteens — loose lid stacks on counters create hygiene risks and waste through contamination and spillage. An in-counter dispenser addresses both issues by keeping the bulk of the lid stack below the counter surface and controlling access to a single lid at a time. The result is a tidier service point and fewer discarded lids during a busy service period.

• One-at-a-time dispensing limits contact with the lid stack
• In-counter mount keeps the counter surface clear and organised
• Interchangeable rubber gaskets suit a range of lid profiles in the compatible size range
• Reduces lid waste caused by contamination or knocked stacks
• Can be oriented horizontally or vertically to suit counter layout

Installation requires a cutout in the counter surface. The orientation flexibility — horizontal or vertical — gives some adaptability to different counter configurations, but it is worth confirming counter depth and material before fitting. This unit is sized for 95–101mm lids; if your operation uses smaller or larger lid diameters, San Jamar produce equivalent dispensers in other size ranges.

The L2410 is well suited to any fixed beverage service point with moderate to high throughput where hygiene standards and counter tidiness matter. It is a practical choice for coffee service counters, self-serve beverage stations, and staff dining facilities. For very high-volume sites running multiple lid sizes simultaneously, it is worth considering whether a multi-unit installation or a different format would better suit the flow of service.

If you are unsure whether this unit fits your counter setup or lid specification, the team is happy to help you confirm compatibility before you order.

The San Jamar L2400C is an in-counter lid dispenser designed to hold and dispense cold beverage lids within the 95–114mm size range. It fits flush into a countertop cutout, keeping lids accessible at the point of service without cluttering the counter surface. The unit uses San Jamar's EZ-Fit dispensing mechanism, which allows one-at-a-time lid removal across several compatible lid sizes without swapping out the dispenser.

In fast-moving service environments — cafés, quick-service counters, sports venues, and hospitality operations — lid dispensers of this type earn their place by keeping the service line tidy and reducing the handling that comes with loose lid stacks. Because lids are loaded from the front with one hand and dispensed individually, there is less risk of contamination from handling multiple lids to retrieve one, and less waste from lids being knocked over or dropped.

Practical advantages for counter staff include:

• One-at-a-time dispensing reduces lid waste and handling time at the point of service
• Front-loading design allows quick restocking without clearing the counter
• Flush in-counter fit keeps the service surface clear and organised
• High-impact plastic construction resists the knocks typical of a busy service environment
• Simple mechanism with few moving parts means minimal maintenance demands

Installation requires a countertop cutout of 146mm diameter, and the tube extends 603mm below the counter surface — so adequate clearance beneath the counter is needed before fitting. The unit is suited to solid countertops of an appropriate thickness; it is worth confirming your counter depth and under-counter clearance before ordering.

This dispenser is well suited to cafés, coffee shops, fast-food counters, and catering operations serving cold beverages in cups that take lids in the 95–114mm range. It is a single-size-range unit, so operations serving a wide variety of cup sizes may need additional dispensers to cover other lid diameters.

If you are unsure whether this unit suits your counter setup or lid range, we are happy to help you work through the options.

The San Jamar L3200 is a wall-mounted lid dispenser designed to hold a single sleeve of beverage cup lids with a maximum diameter of 89mm, covering the 6 to 10oz cup range commonly used in coffee shops, cafés, and self-serve beverage stations. It is a straightforward, functional piece of counter equipment that keeps lids organised, protected from contamination, and within easy reach of staff and customers alike.

In practical service terms, a dispenser like this earns its place by removing the clutter of loose lid stacks on counters and reducing the time staff spend hunting for lids during a busy rush. Because lids are loaded from the front, refilling is quick and does not require dismounting the unit. The stainless steel construction stands up well to regular cleaning and the general wear of a commercial environment.

Key operational advantages include:

• Front-loading design allows rapid refilling without disrupting service
• Wall-mounted position keeps counter space clear
• Stainless steel construction is easy to wipe down and resistant to everyday wear
• Enclosed tube protects lids from handling contamination
• Consistent lid presentation speeds up service at the point of dispensing

Installation is straightforward — the unit attaches to most standard wall surfaces using the mounting hardware provided. It is worth confirming lid diameter compatibility before ordering, as lid sizing varies across cup suppliers and ranges. This is a single-size dispenser; operations running multiple cup sizes alongside one another may need additional units or a multi-position model.

The L3200 is well suited to cafés, coffee bars, quick-service restaurants, and self-serve beverage counters where a single lid size is in regular use and counter space is at a premium. For higher-volume sites or those managing several lid formats simultaneously, a larger or multi-bay dispenser solution may be worth considering.

If you are unsure whether this model fits your current lid range or service setup, feel free to get in touch with the team for a straightforward steer.

The San Jamar L3400 is a wall-mounted lid dispenser designed to hold a single sleeve of beverage cup lids up to 101mm in diameter, covering the standard 12 to 24oz cup range commonly used across coffee counters, cafés, canteens, and takeaway operations. It mounts directly to a wall or vertical surface, keeping lids off the counter and positioned close to the point of service.

In a busy service environment, lid dispensers do a straightforward but important job: they keep lids clean, accessible, and consistently presented so staff are not fumbling through a loose stack during a queue. The front-loading design means refilling takes seconds without removing the unit from the wall, which is a practical advantage when covers are turning and there is no time to stop.

The stainless steel construction holds up well in commercial conditions and wipes down easily, which matters in any environment where hygiene standards apply. Key operational points worth noting:

• Front-loading design allows quick refilling without unmounting the unit
• Wall-mounted position keeps lids hygienic and off the work surface
• Stainless steel construction is easy to clean and built for daily use
• Compatible with standard 12–24oz beverage cup lids up to 101mm diameter

This is a single-sleeve unit, so it is best suited to lower-to-moderate volume service points or as one of several dispensers across a longer counter run. For high-volume sites dispensing multiple lid sizes simultaneously, a larger or multi-bay configuration would be worth considering.

If you are setting up a new beverage station or are unsure whether this fits your lid range, we are happy to help you check compatibility before you order.

The San Jamar L2200C is an in-counter lid dispenser designed to sit flush within a beverage counter surface, dispensing cold-drink lids one at a time through an EZ-Fit mechanism. It is intended for operations where lids are handed out at point of service — coffee shops, quick-service restaurants, cafeterias, and similar high-footfall beverage stations. The dispenser accommodates a range of cold-beverage lid sizes within the 70–95mm diameter bracket, removing the need to swap out units when lid sizing varies across a menu.

In a busy service environment, loose lid stacks are a persistent hygiene and waste problem. The L2200C addresses this directly by keeping the lid supply enclosed within the counter, away from handling, spillage, and airborne contamination. The front-loading design allows staff to reload one-handed without disrupting the service line, which matters during peak periods when counter space and attention are both limited.

• One-at-a-time dispensing reduces lid waste and accidental contamination
• Front-loading reload requires one hand, keeping service flowing during busy periods
• Enclosed tube design protects lid stock from counter spillage and handling
• High-impact plastic construction resists cracking under daily commercial use
• No adjustment mechanism — minimal moving parts means less to go wrong

Installation requires a counter cut-out of 124mm diameter and sufficient counter depth to accommodate the tube below the surface. It is worth confirming counter thickness and underside clearance before ordering, as the tube length determines how much depth is needed beneath the worktop. The unit is not suitable for hot-drink lids or for surface mounting — it is designed specifically for flush in-counter installation.

This dispenser is well suited to cafés, canteens, and quick-service operations running cold-drink programmes with consistent lid sizing in the 70–95mm range. For operations dispensing multiple lid sizes across a wider diameter range, or running very high volumes, it is worth considering whether a multi-aperture or higher-capacity solution would be more practical.

If you are unsure whether this unit fits your counter specification or lid range, the team is happy to talk it through before you commit to an order.