Toppers & Protectors

The Mitre Comfort Quiltop is a straightforward quilted mattress protector intended for hospitality use. It sits over the mattress surface and is held in place by a fitted-sheet style elasticated skirt, providing a degree of surface protection without adding significant bulk to the bed setup. The cover and filling are both polyester microfibre, keeping the overall weight low and making the protector straightforward to launder in a commercial or on-premises laundry.

For hotel housekeeping teams, the fitted skirt design means the protector stays in place during guest stays and can be removed and replaced efficiently during a turn. The 25cm deep skirt accommodates a reasonable range of mattress depths, which suits most standard contract divan beds. It is not a performance topper — it is designed to protect the mattress surface rather than alter the feel of the bed, which makes it a practical choice for properties that want to extend mattress life without changing their sleep product.

• Low-weight construction keeps laundry handling straightforward
• Fitted skirt secures the protector during guest use
• Machine washable at 40°C on a gentle or wool cycle
• Tumble dry at low heat — suitable for laundry room processing
• Polyester microfibre cover is soft against the under-sheet

Care requirements are worth noting: the wash process calls for reduced mechanical action, which means a wool or gentle cycle rather than a standard cotton programme. Bleach must not be used, and dry cleaning is not suitable. Properties running high-volume laundry should confirm their equipment supports a gentle cycle before committing to large quantities.

This protector suits hotels and guest houses looking for a reliable, no-frills mattress protection solution at a practical price point. If your operation requires a heavier barrier against moisture or heavier soiling, a more substantial waterproof protector may be a better fit. If you are unsure which specification suits your bedding programme, our team is happy to talk it through.

The Mitre Sleepsafe Complete Mattress Encasement is a full-coverage, zip-close protector designed to encase the entire mattress — top, base, and sides — rather than simply covering the sleeping surface. It is made from polyester and sized to fit a standard king mattress at 1520mm wide by 2000mm long, accommodating mattress depths up to 250mm.

In a hotel environment, full encasement offers a meaningful step up from a standard fitted protector. By sealing the mattress completely, it provides a consistent barrier against moisture, body fluids, dust mite allergens, and general soiling across the entire unit. This is particularly relevant in properties that operate high room turnover, or where compliance with allergy-aware or infection-control standards forms part of housekeeping policy.

From a practical housekeeping standpoint, the encasement offers several operational advantages:

• Full zip closure seals all six sides of the mattress
• Polyester construction is straightforward to launder at commercial temperatures
• Lightweight at 1.29kg, making it manageable during regular bed changes
• Protects mattress investment by reducing soiling and wear over time
• Supports allergen-management and hygiene protocols

It is worth noting that this is a full encasement product, which takes slightly more effort to fit and remove than a standard protector during a room turn. Some housekeeping teams reserve encasements for long-stay or allergy-designated rooms and use surface protectors for standard nightly changeovers. How you deploy it will depend on your room-change frequency and housekeeping workflow.

This encasement is well suited to hotels, serviced apartments, and guest houses looking to extend mattress life and maintain hygiene standards. If you are equipping a large number of rooms or need guidance on the right protector specification for your property, the team is happy to talk it through.

The Mitre Luxury Tencel Superior Mattress Topper is a quilted topper designed for hospitality environments where guest comfort and consistent bedding quality are a priority. It uses a blended fill of Tencel and polyester hollowfibre, covered in a polyester microfibre shell and secured to the mattress via elasticated corner bands.

In a hotel or guest accommodation setting, mattress toppers take considerable wear across frequent linen changes, deep cleans, and extended occupancy periods. The Tencel fibre content helps regulate temperature and wick moisture, which tends to benefit guest comfort in rooms that run warm or see year-round use. The hollowfibre component maintains loft and resilience through repeated laundering, which matters operationally when toppers are cycled through on-premises laundry at scale.

From a practical standpoint, this topper offers a number of advantages relevant to housekeeping and procurement teams:

• Elasticated bands allow quick, consistent fitting during bed-making
• Tencel content aids moisture management without significant added weight
• Hollowfibre fill retains shape through commercial wash cycles
• Microfibre cover is smooth and compatible with standard linen layering
• Suitable for super king configurations in suites or premium rooms

It is worth noting that this is a mid-to-upper weight topper at 1000g/m2. For properties seeking a lighter protector-style layer, a lower-fill option may be more appropriate. For higher-specification properties where a more substantial feel is required, a heavier topper from the range may be worth considering.

This topper is well suited to hotels, serviced apartments, boutique properties, and spa facilities looking to add a reliable comfort layer without compromising on launderability. If you are fitting out multiple room types or want to discuss volume requirements, our team is happy to help you work through the right specification.

The Mitre Essentials Quilted Polypropylene Mattress Protector is a slim, lightweight layer designed to sit between the mattress and bed linen, helping to protect against staining, everyday wear, and the build-up of bacteria over time. It is intended for regular use in guest accommodation rather than as a comfort layer, and its low-profile construction means guests are unlikely to notice it beneath fitted sheets.

In a housekeeping environment where linen turnaround is frequent, protectors like this one earn their place primarily through ease of handling and laundry compatibility. The protector is reversible, which extends its practical life between replacements, and the elasticated corner straps help keep it positioned correctly on the mattress during use — a small detail that reduces re-making time during room turns.

• Machine washable construction supports high-frequency laundering routines
• Elasticated corner straps hold the protector securely during guest use
• Reversible design helps extend service life between replacements
• Lightweight fabric adds minimal bulk to linen handling and storage
• Protects against staining, bacteria, and general mattress wear

This protector is well suited to budget and mid-range hotel, guest house, and B&B operations where mattress protection and straightforward laundering are the primary requirements. It is not designed as a plush topper or comfort enhancer. Properties seeking a heavier or more padded option for guest comfort purposes may find a higher-specification protector more appropriate.

If you are outfitting a larger number of rooms or have specific laundering or fire-regulation considerations, it is worth having a conversation with us before placing a bulk order.

The Mitre Comfort Topper Protector is a quilted, channel-stitched mattress topper designed for consistent use in hotel and hospitality environments. It fits over an existing mattress via elasticated corner straps, adding a layer of soft polyester microfibre fill to increase guest comfort without requiring a mattress replacement.

In a hospitality setting, mattress toppers take considerable daily wear — from repeated bed-making and guest use through to frequent laundering. This topper is constructed with a polyester microfibre cover and a generous soft fill that holds its loft reasonably well through regular washing cycles, making it a practical choice for properties managing high room turnover.

From an operational standpoint, the design keeps housekeeping workflows straightforward:

• Elasticated straps allow quick fitting and removal during room turns
• Machine washable construction supports in-house laundry programmes
• Quilted and channel-stitched finish helps the fill stay evenly distributed after repeated washes
• Polyester microfibre fill resists clumping with correct laundering
• Available across a range of sizes to suit different bed configurations

It is worth noting that this topper adds comfort rather than mattress protection in the traditional sense — operators looking primarily for a waterproof or allergen-barrier layer should consider a dedicated mattress protector instead. For properties with heavily used beds or where longer intervals between laundering are unavoidable, a heavier-specification topper may be more appropriate.

This product is well suited to hotels, guest houses, and serviced accommodation looking for a reliable, washable topper at a sensible price point. If you are equipping multiple rooms or would like guidance on the right specification for your property, the team is happy to help you work through the options.

The Mitre Comfort Quiltop Bunk Mattress Protector is a straightforward quilted protector designed for use on bunk-sized mattresses in guest accommodation. It features a polyester microfibre cover with a polyester fill, providing a light layer of protection against everyday wear and moisture without adding significant bulk to the sleeping surface.

In a hospitality setting, durability through frequent laundering matters as much as the protector itself. This protector is machine washable at 40°C using a reduced mechanical action cycle, making it compatible with the wool or delicate programmes common on commercial laundry equipment. Tumble drying is permitted at a low heat setting, which supports reasonable turnaround between guest stays without specialist handling.

The fitted sheet-style skirt, with a 25cm depth, keeps the protector securely in place on the mattress — a practical consideration for bunk beds where access for straightening bedding is more limited than on standard beds. The polyester microfibre cover material is relatively easy to maintain and holds up well under regular washing cycles.

A few practical points worth noting: this protector does not carry waterproofing properties, so it is better suited to standard guest protection rather than settings requiring clinical or fluid-resistant bedding. It is sized specifically for bunk mattresses, so confirming mattress dimensions against the protector size is advisable before ordering in bulk.

This protector is well suited to hotels, hostels, holiday parks, and similar accommodation providers running bunk bed configurations. For standard single or double beds, alternative sizes are available within the range. If you are equipping a larger property or have specific laundry or durability requirements, the team is happy to advise on the most suitable option.

The Mitre Luxury Tencel Superior Mattress Topper is a quilted bed topper designed for hotel and guest accommodation use. It sits over the mattress and provides an additional layer of cushioning and temperature regulation, with a fill blend of 30% Tencel and 70% polyester hollowfibre at a 1000g/m² weight. The cover is a 100% polyester microfibre, and the topper is secured to the mattress via elasticated corner bands.

Tencel is a natural-derived fibre known for its moisture-wicking properties and smooth, soft handle, which makes it a practical choice for hospitality settings where guest comfort and consistent sleep quality matter. The hollowfibre component adds loft and resilience, helping the topper retain its shape through repeated laundering — an important consideration in any property with a frequent linen changeover cycle.

From an operational standpoint, this topper works well where a property wants to enhance the perceived quality of existing mattresses without a full bed replacement programme. Key practical points include:

• Elasticated bands provide a secure fit with minimal housekeeping time
• Quilted construction helps maintain even fill distribution after washing
• Tencel fill supports moisture management for guest comfort
• 100% polyester microfibre cover is durable and easy to launder
• Single size suits standard single and small double hospitality bed frames

This topper is suited to hotels, B&Bs, serviced apartments, and similar guest accommodation where linen durability and guest comfort are both priorities. For properties with higher-volume laundry requirements or heavier-use environments, it is worth considering whether a more robust specification would be a better long-term investment.

If you are equipping multiple rooms or reviewing your full linen programme, our team is happy to talk through the options with you.

The Mitre Comfort mattress topper is a widely used piece of hotel linen, designed to add a layer of soft padding over an existing mattress without requiring replacement. The polyester microfibre cover houses a generous depth of quilted fill, channel-stitched to keep the filling evenly distributed across the sleeping surface and prevent bunching during regular use.

In a hotel or serviced accommodation environment, a topper needs to hold up to frequent laundering as well as daily wear from guest changeovers. This one is machine washable and attaches via elasticated straps, which helps housekeeping teams fit and remove it efficiently during room turns. The construction is straightforward and consistent, which matters when you are managing linen across multiple rooms or properties.

Practical operational advantages include:

• Machine washable for straightforward laundering in commercial cycles
• Elasticated corner straps for quick fitting and removal during room turns
• Channel stitching keeps fill evenly distributed and prevents displacement
• Polyester microfibre construction resists pilling under repeated washing
• Available across a range of sizes for consistent supply across different room types

This topper is best suited to hotel guest rooms, bed and breakfast accommodation, and serviced apartments where guest comfort and linen durability both need to be considered. It sits at a practical mid-range level — suitable for three- and four-star environments. Properties requiring a heavier fill weight or a more premium finish may want to consider higher-specification options within the Mitre range.

If you are equipping multiple rooms or standardising linen across a site, it is worth speaking with us about quantities and size mix before ordering.

The Mitre Essentials Polypropylene Pillow Protector is a plain, non-quilted cover designed to sit between the pillow and pillowcase, providing a basic barrier against moisture, stains, and everyday soiling. Made from polypropylene, it offers a practical, low-cost way to keep pillows in serviceable condition over a longer period.

In a housekeeping context, pillow protectors are largely invisible to the guest but do a straightforward job: reducing the rate at which pillows absorb body oils, perspiration, and incidental spillages. This helps maintain the condition of the fill and keeps odours in check between deeper cleans or pillow replacements.

• Guards against moisture and staining to extend pillow lifespan
• Helps maintain neutral odour within the pillow fill
• Reduces the frequency of full pillow replacement
• Simple non-quilted construction for easy housekeeping turnover
• Budget-friendly option suited to high-volume room stock

As a non-quilted protector, it adds minimal bulk, which suits properties where a clean, flat bed profile is preferred. It fits a standard pillow size and is straightforward to launder alongside regular linen cycles. It is worth noting that polypropylene protectors sit at the more economical end of the range — for properties where guest comfort expectations are higher, a quilted or more substantial fabric protector may be worth considering.

This protector is well suited to budget and mid-range hotels, guest houses, or high-turnover accommodation where keeping per-room linen costs manageable is a priority. If you are equipping a larger property or want guidance on matching protector specifications to your linen programme, feel free to get in touch with the team.

The Mitre Sleepsafe Complete Mattress Encasement is a full-coverage, zip-close protector designed for single beds in hotel and accommodation environments. Unlike a standard mattress topper or fitted protector, it fully encloses the mattress on all six sides, providing a complete barrier rather than surface-only coverage.

In a hotel or guest accommodation setting, mattresses represent a significant asset. Full encasement protects against moisture, dust mites, allergens, and general soiling — helping to extend mattress life and maintain hygiene standards between guest stays. The zip closure allows the encasement to be removed and laundered without difficulty, which matters in high-turnover housekeeping operations.

Made from polyester and weighing 820g, it is lightweight enough to handle easily during linen changes without adding bulk or noticeably altering the feel of the bed for guests.

• Full six-sided encasement with zip — complete mattress protection, not surface-only
• Removable and launderable — practical for regular housekeeping cycles
• Helps extend mattress service life in high-turnover accommodation
• Lightweight construction — straightforward to fit and remove during room turnaround

This encasement is sized for standard single mattresses and is well suited to hotel rooms, guest houses, student accommodation, and similar single-occupancy settings. Properties with higher guest turnover or specific allergen-control policies may benefit from discussing volume requirements or suitability with the team before ordering.

If you have questions about fitting, laundry compatibility, or which protector option is right for your property, we are happy to help before you commit to an order.

The Mitre Essentials Duvet Protector is a straightforward, practical solution for extending the working life of duvets in hotel rooms, guest houses, and serviced accommodation. Made from soft spun polypropylene, it fits over the duvet and fastens with a zip closure, creating a barrier against dust, dirt, and staining during regular use.

In hospitality environments where duvets are turned over frequently between guests, unprotected bedding degrades quickly. A protector of this type reduces direct contact between the duvet fill and everyday soiling, meaning the duvet itself requires less frequent laundering and lasts considerably longer in service. The zip closure keeps the protector securely in place through guest use and housekeeping handling alike.

• Guards against staining to extend duvet lifespan
• Soft polypropylene cover that does not affect sleeping comfort noticeably
• Zip closure for a secure, well-fitted finish
• Lightweight at 410g, straightforward for housekeeping to change and launder
• Double size, with single and king options available in the same range

This protector is suited to properties looking to reduce linen replacement costs without significant outlay. It is a practical first line of protection rather than a waterproof or allergen-barrier product, so operators with more demanding hygiene or protection requirements should consider whether a heavier-duty specification would be more appropriate for their setting.

If you are equipping multiple rooms or building out a linen programme and would like to discuss volume requirements or the broader Mitre Essentials range, the team is happy to help.

The Mitre Comfort Quiltop is a straightforward quilted mattress protector designed for hotel and hospitality use. It features a polyester microfibre cover with a polyester filling, and attaches to the mattress via a fitted sheet-style skirt with a 25cm depth — making it compatible with most standard hotel divan and pocket-sprung mattresses of this size.

In a hotel environment, mattress protectors take regular, heavy use through frequent guest turnover and repeated laundering cycles. The Quiltop is designed with this in mind: the polyester microfibre cover resists pilling and maintains its surface appearance through consistent machine washing, while the quilted construction helps the filling retain its loft and protective quality over time.

• Adds a layer of protection against everyday wear and minor spillage
• Fitted skirt keeps the protector securely in place throughout the night
• Machine washable at 40°C on a wool/reduced mechanical action cycle
• Tumble dries at a low heat setting, supporting efficient laundry turnaround
• Lightweight construction makes bed-making and changeovers straightforward for housekeeping staff

It is worth noting that this protector is not waterproof — it is intended as a comfort and hygiene layer rather than a fully waterproofed barrier. Properties with higher spillage risk, such as those catering to young families or healthcare-adjacent facilities, may want to consider a protector with an integrated waterproof membrane instead.

This protector is well suited to hotels, guest houses, and serviced apartments looking for a reliable, practical solution at a sensible price point. It works well where laundering is managed on-site or through a linen hire arrangement, given its straightforward wash and dry requirements.

If you are sourcing protectors across multiple bed sizes or room configurations and want to discuss which specification suits your property best, the team is happy to help.

This single mattress protector from Mitre Essentials is a slim, quilted cover designed for professional hospitality use. Constructed from polyester with a lightweight 50g/m² quilted finish, it sits discreetly over the mattress surface, offering a protective layer without adding noticeable bulk for guests. The left-hand zip link is the defining feature here — it allows two single beds to be joined together to form a double configuration, which is a practical requirement for properties that need flexible room layouts.

In a hotel or guest accommodation setting, mattress protectors take considerable wear over time. This protector is designed to guard against staining, moisture, and everyday deterioration, helping to extend the serviceable life of the mattresses beneath. The elasticated corner straps keep it securely in place through normal use and laundry cycles, reducing the time housekeeping staff spend resetting beds between guests. The reversible construction adds a degree of practicality for linen management.

Key practical points worth noting:

• Left-hand zip link allows pairing with a right-link single to create a double bed
• Lightweight 50g/m² construction sits low-profile under bed linen
• Elasticated corner straps for a secure, shift-resistant fit
• Reversible for flexible use and extended service life
• Protects against stains, bacteria, and general wear

This protector is well suited to hotels, serviced apartments, and guest houses that operate flexible room configurations. It is a standard-weight option — properties with very high turnover or demanding laundry requirements may want to consider a heavier-duty specification. If you are equipping multiple rooms or need to match zip-link pairs correctly, it is worth speaking with the team to make sure you order the right combination.

This single mattress protector from Mitre Essentials is a practical, lightweight solution for protecting hotel and guest accommodation mattresses from daily wear, staining, and general soiling. Constructed from polyester with a quilted polypropylene face, it sits discreetly beneath bed linen without adding noticeable bulk or affecting the feel of the bed for guests.

The right-hand zip link is the feature that sets this particular variant apart. It allows two single protectors to be joined together, enabling individual single beds to be converted into a double configuration without gaps or misalignment between the two mattresses. This is a practical consideration for hotels that operate twin rooms and need the flexibility to offer double occupancy when demand requires it.

Key practical points worth noting:

• Elasticated corner straps hold the protector securely in place during use and when changing linen
• Reversible construction extends usable life between replacements
• Lightweight fabric at 50g/m² keeps laundry handling straightforward
• Polypropylene face offers a basic barrier against moisture and everyday staining
• Right zip link pairs with a left zip link protector to form a joined double

These protectors are well suited to budget and mid-range hotel environments, guest houses, and serviced accommodation where a reliable, cost-effective mattress protection solution is needed. They are not designed as a heavy-duty waterproof barrier, so operations with higher hygiene or fluid protection requirements may wish to consider a more robust specification.

If you are unsure whether this protector is the right fit for your bedding setup or room configuration, our team is happy to help you work through the options.

The Mitre Comfort Polyzip Pillow Protector is a plain, non-quilted protector designed to sit between a pillow and its pillowcase. Made from polycotton, it closes with a zip fastening to keep the pillow fully enclosed during use. It is a straightforward, functional item aimed at hospitality operations where pillow hygiene and longevity are everyday concerns.

In a commercial guest room environment, pillows take significant daily use. Body oils, perspiration, and moisture work through a standard pillowcase over time, gradually degrading the fill and outer fabric of the pillow itself. A protector intercepts that transfer, keeping the pillow cleaner between deep laundering cycles and meaningfully extending its serviceable life. For busy hotels and guest houses turning rooms daily, that translates directly into reduced replacement frequency.

• Zip closure keeps the protector securely in place during sleep and when stripping beds
• Polycotton construction is practical for high-frequency commercial laundering
• Non-quilted design sits flat under a pillowcase without adding bulk
• Acts as a barrier against moisture, oils, and everyday body contact
• Helps maintain pillow hygiene standards between full pillow replacements

Washing frequency is worth considering as part of your linen programme. In a commercial setting, protectors are typically laundered with each room change — this is what makes the combination of a washable protector and a longer-lasting pillow cost-effective over time. The polycotton material is suited to regular commercial laundry use, though operators should follow the care instructions to maintain performance over repeated wash cycles.

This protector is well suited to standard single-bed and double-bed pillow use in hotels, guest houses, inns, and serviced accommodation. If you are equipping a larger property or sourcing in volume, it is worth speaking with us to confirm quantities and any bulk considerations before ordering.

The Mitre Luxury Pillowshield pillow protectors are designed for hotel and hospitality use, providing a practical layer of protection between the pillow and pillowcase. Each protector fastens with a zip closure, helping to keep the pillow securely covered and protected from moisture, body oils, and general wear over repeated guest stays.

In a hospitality environment, pillow hygiene is a routine concern. A good quality protector extends the usable life of pillows considerably, reducing replacement frequency and helping maintain consistent guest comfort standards between laundry cycles. The polyester construction is well suited to high-turnover laundry programmes, holding its shape and performance after repeated washing.

Practical benefits for housekeeping and accommodation teams include:

• Zip closure keeps protector in place during guest use and housekeeping changes
• Polyester material handles frequent commercial laundering reliably
• Supplied in a pack of two, supporting straightforward par stock management
• Protects pillow fill from moisture and soiling, extending pillow lifespan
• Standard sizing suits widely used pillow formats in hotel bedding programmes

These protectors are well suited to hotels, guest houses, serviced apartments, and similar accommodation operations where bedding hygiene standards and linen longevity are everyday operational priorities. If your property runs a high-volume or specialist bedding programme, it is worth discussing whether a different weight or specification would better suit your laundry and housekeeping setup.

If you are unsure which protector specification fits your current bedding programme, the team is happy to help you work through the options.

The Mitre Comfort Aquaguard is a fully waterproof fitted mattress protector designed for hospitality environments where mattress hygiene and longevity are a practical priority. Made from 100% polyester jersey with a TPU (thermoplastic polyurethane) backing, it provides a reliable waterproof barrier while remaining soft enough not to affect sleeping comfort.

In hotel and guest accommodation settings, mattresses represent a significant ongoing investment. A properly fitted waterproof protector reduces the risk of fluid damage, staining, and the premature replacement costs that follow. The fitted skirt construction keeps the protector firmly in place through regular use and housekeeping turnover, which matters in properties where beds are stripped and remade frequently.

Key practical features for housekeeping and accommodation operations:

• Fully waterproof TPU backing protects against fluid penetration
• Fitted skirt design stays secure through repeated bed-making
• 100% polyester jersey construction is soft against the mattress surface
• Lightweight at 440g, easy to handle during changeovers
• Compatible with standard small double mattress sizes

It is worth noting that while the protector is waterproof, the jersey upper layer will absorb surface moisture before the TPU barrier acts — this is typical of this construction and does not affect protection. For very high-turnover environments or applications requiring full surface wipe-down capability, a more heavy-duty impermeable option may be more appropriate.

This protector is well suited to hotels, serviced apartments, guest houses, and similar accommodation settings looking for a reliable, cost-effective solution for mattress protection at small double size. If you are specifying across multiple room types or bed sizes, the team is happy to help match the right protector to your requirements.

The Mitre Comfort Aquaguard is a fully waterproof fitted mattress protector designed for double beds in hotels, guest houses, and serviced accommodation. It is constructed from a polyester jersey fabric with a TPU (thermoplastic polyurethane) backing, which provides a reliable waterproof barrier while remaining quiet and comfortable beneath bed linen — an important consideration in a hospitality setting where guest sleep quality matters.

In operational terms, the fitted skirt design holds the protector securely in place across all four sides of the mattress, reducing the risk of slipping or bunching during use. This makes it more practical for housekeeping teams, as the protector sits consistently in position and can be stripped and replaced quickly during room turns. The lightweight construction at 470g means it adds minimal bulk to the bed build while still providing full coverage.

Key practical points for hospitality operators:

• Fully waterproof TPU backing protects the mattress from spills and moisture
• Fitted skirt design keeps the protector in place between room services
• Polyester jersey surface is soft enough not to affect guest comfort
• Lightweight at 470g, practical for high-volume laundry operations
• Sized for a standard double mattress

It is worth noting that this protector is designed for standard depth double mattresses. If your property uses particularly deep or pillow-top mattresses, it is worth confirming the skirt depth is suitable before ordering in volume.

This protector is a practical choice for hotels, B&Bs, and serviced apartments looking to protect mattress stock without compromising the guest experience. If you are equipping multiple rooms or need to discuss volume requirements, the team is happy to help you work out the right specification.

The Mitre Essentials Quilted Polypropylene Mattress Protector is a lightweight, slim-profile protector designed for use in professional hospitality settings. It sits between the mattress and the bottom sheet, providing a barrier against staining, moisture, and general wear without adding noticeable bulk to the bed.

In a hotel environment, mattresses represent a significant ongoing capital cost. A protector used consistently from the outset helps extend mattress life by shielding against the kind of gradual deterioration — staining, odour absorption, surface wear — that accumulates quickly under regular guest use. The polypropylene construction is practical for this purpose: it resists moisture penetration and holds up well through repeated laundering.

From a housekeeping standpoint, the protector is straightforward to manage. It is reversible, which can extend the usable life between replacements, and it is suitable for machine washing, keeping it compatible with standard on-site or contracted laundry operations.

• Elasticated corner straps hold the protector securely through the night and during bed-making
• Slim, lightweight construction sits discreetly beneath the sheet without affecting guest comfort
• Reversible design offers flexibility in housekeeping rotation
• Machine washable for compatibility with commercial laundry processes
• Polypropylene facing provides a practical barrier against staining and surface moisture

This protector is well suited to hotels, guest houses, and serviced accommodation operating at most service levels. Properties with higher-specification bedding programmes may wish to consider a heavier-grade option. For guidance on selecting the right protector for your property's linen specification and laundry setup, the team is happy to help.

The Mitre Heritage Duke is a premium-grade mattress topper designed for hotel and spa environments where guest comfort is a priority. Filled with siliconised ball fibre and enclosed in a 100% cotton cambric cover, it is built to add a meaningful layer of softness to existing mattresses without compromising the integrity of the bed setup beneath.

The box construction is a practical differentiator here. Unlike simpler toppers where the filling can migrate with regular use, the Duke uses a compartmentalised build to keep the fill evenly distributed across the surface. This matters in a hospitality setting where beds are turned over daily — consistent comfort from one guest to the next is easier to maintain when the filling stays where it should. It is worth noting that the box construction can require some initial manipulation when fitting, so housekeeping staff should be briefed accordingly.

Key practical features for housekeeping and procurement teams:

• Siliconised ball fibre fill for consistent loft and softness
• 100% cotton cambric cover — breathable and easy to launder
• Box construction holds fill in place through repeated use
• Elasticated corner straps secure the topper to the mattress
• Sized for metric king beds, which is the standard in most contemporary hotel configurations

This topper is well suited to mid-range and upper-tier hotel rooms where a quality sleep experience is part of the guest proposition. It sits at the top of the Mitre Heritage topper range, so if budget is a consideration or the application is lower-turnover accommodation, a lighter option from the same range may be more appropriate.

If you are specifying toppers across a number of room types or need guidance on which product best fits your laundry and housekeeping setup, our team is happy to help work through the options.

The Mitre Sleepsafe Complete Mattress Encasement is a full-coverage protective cover designed for double mattresses in hotel and hospitality environments. Unlike a standard mattress protector that covers only the top surface, this encasement wraps the entire mattress and fastens with a zip, sealing all six sides. It is made from polyester and is intended for use where full mattress protection is a housekeeping or hygiene priority.

In a hotel setting, mattresses represent a significant investment, and exposure to moisture, allergens, and general wear can shorten their working life considerably. A full encasement provides a barrier across the entire mattress surface, which a fitted protector alone cannot achieve. This makes it a practical choice for properties that need to maintain mattress condition over a high number of guest stays.

• Full six-sided coverage via zip fastening for complete mattress protection
• Polyester construction suitable for regular commercial laundering
• Zip closure keeps the encasement securely in place during bed-making
• Helps extend mattress lifespan in high-turnover hospitality environments
• Lightweight at 1.18kg, keeping linen handling practical for housekeeping teams

It is worth confirming that your mattress depth is compatible before ordering, as encasements are sized to fit within a defined depth range. This encasement is designed for standard double mattresses and may not be appropriate for particularly deep or pillow-top mattresses without checking the fit.

This product is well suited to hotels, guest houses, and serviced accommodation operators looking to protect double mattresses as part of a structured linen and maintenance programme. If you are outfitting multiple rooms or have non-standard mattress depths, it is worth getting in touch before placing a bulk order to make sure the specification is right for your setup.

The Mitre Comfort Aquaguard is a fully waterproof fitted mattress protector designed for use in hotel and guest accommodation environments. Made from a polyester jersey fabric with a TPU (thermoplastic polyurethane) backing, it sits directly over the mattress and provides a barrier against liquid penetration while retaining a soft, comfortable sleeping surface.

In a hospitality setting, mattress protection is a practical necessity rather than an optional extra. Spills, moisture, and general wear are unavoidable over a mattress lifespan, and replacing unprotected mattresses ahead of schedule is a significant cost. The Aquaguard is designed to extend mattress life by shielding against the kinds of incidents that cause the most damage in regular guest use.

The fitted skirt design secures the protector firmly around the mattress, reducing the risk of it shifting during use or during bed-making — a practical consideration in high-turnover housekeeping operations. Key operational qualities include:

• Fully waterproof TPU backing prevents liquid reaching the mattress
• Polyester jersey surface is soft against linen and does not create noise
• Fitted skirt design holds securely during housekeeping changeovers
• Lightweight construction at 360g simplifies laundry handling
• Compatible with standard single mattress dimensions

It is worth confirming mattress depth before ordering, as the fitted skirt needs to accommodate the full profile of the mattress. This protector is well suited to standard single beds in hotel rooms, B&Bs, and serviced accommodation. For zip-and-link or larger bed configurations, alternative sizes are available within the range.

If you are equipping a property with multiple bed types or want guidance on the right specification for your laundry setup, the team is happy to help you work through the options.

The Mitre Comfort mattress topper is a widely used addition to hotel beds, designed to improve the feel of an existing mattress without replacing it. Quilted and channel stitched, it uses a polyester microfibre cover with a substantial soft filling to add a layer of cushioned comfort on top of any standard mattress. It fits via elasticated corner straps, which hold the topper securely in place through regular guest turnover.

In a hospitality context, durability through repeated laundering is as important as initial comfort. The Mitre Comfort topper is machine washable, which supports practical housekeeping workflows and helps maintain hygiene standards across a busy property. The polyester microfibre construction is straightforward to care for and retains its loft with correct laundering.

• Machine washable for ease of housekeeping and regular hygiene cycles
• Elasticated straps provide a secure fit without specialist fitting
• Quilted and channel stitched construction helps filling stay evenly distributed
• Polyester microfibre cover is practical and durable in commercial use
• Available across a range of bed sizes to suit mixed bedroom configurations

This topper is well suited to hotels, guesthouses, and serviced accommodation where guest comfort is a priority and linen needs to withstand frequent washing. It is a practical mid-range option rather than a premium luxury product, and works best where a reliable, consistently comfortable sleep surface is the goal. For properties requiring a heavier fill weight or a more premium specification, higher-grade options within the Mitre range may be worth considering.

If you are equipping multiple rooms or want to confirm the right specification for your property's bed sizes and housekeeping processes, the team is happy to help.

The Mitre Luxury Pillowshield is a zipped pillow protector designed to sit between a pillow and its pillowcase, shielding the pillow from the everyday wear that shortens its usable life in a hospitality environment. Made from 100% cotton, it provides a soft, breathable barrier without adding unwanted bulk or affecting the feel of the finished bed.

In hotel and guest accommodation settings, pillows take considerable use between replacement cycles. A good-quality protector helps guard against moisture, staining, and the gradual deterioration that comes from regular laundering without one. The cotton construction means the protector itself can be laundered routinely alongside standard linen, making it practical to maintain to a consistent hygiene standard.

The zipped closure is a practical feature in this context — it keeps the protector firmly in place during use and during the laundering process, and provides a more complete barrier than an open-ended design. At 150g, the protector is substantial enough to feel durable in use without being cumbersome to handle during bed-making or linen turnover.

This protector is well suited to hotels, serviced apartments, B&Bs, and guest houses looking to extend pillow replacement intervals without compromising on guest comfort or hygiene standards. It is sized for a continental pillow at 50x90cm — properties using standard UK pillows should confirm sizing before ordering across a large quantity.

If you are specifying protectors across a property or reviewing your full bedding protection programme, we are happy to help you work through the options.

This quilted mattress protector from Mitre Essentials is a straightforward, practical solution for hotels and guest accommodation looking to extend the lifespan of their mattress stock. Made from polypropylene with a polyester construction, it sits over the mattress surface and provides a reliable barrier against staining, moisture, and general wear from regular guest use.

In a hospitality environment, mattress replacement is one of the more significant recurring costs. A well-fitted protector used consistently across all rooms helps slow surface deterioration and keeps mattresses in acceptable condition for longer between replacements. The elasticated corner straps give a secure fit that holds through the night and through the housekeeping process without needing adjustment.

Practically, this protector is well suited to high-turnover properties where laundry efficiency matters. Key operational points include:

• Reversible design extends the usable life between washes
• Lightweight fabric adds minimal bulk beneath bed linen
• Machine washable at 40°C, compatible with standard commercial laundry cycles
• Elasticated corners allow quick, consistent fitting by housekeeping staff
• Polypropylene face layer offers resistance to everyday staining and bacteria

For properties with particularly heavy occupancy or where guests have specific comfort sensitivities, it is worth considering whether a thicker or more cushioned protector might be more appropriate. This is a slim, functional product — it protects rather than enhances the sleep surface.

It is best suited to hotels, B&Bs, serviced apartments, and similar guest accommodation where practicality, laundry compatibility, and consistent presentation across rooms are the priority. If you are equipping a large number of rooms or have specific linen programme requirements, the team is happy to talk through the options before you commit to quantities.

The Mitre Essentials Quilted Polypropylene Mattress Protector is a lightweight, slim-profile protector designed for use in hotels, guesthouses, and serviced accommodation. It sits over the mattress to provide a basic barrier against everyday wear, minor spills, and general soiling, helping extend the serviceable life of the mattress beneath.

In a hospitality environment where beds turn over regularly, practical protection matters more than premium feel. This protector is reversible and constructed from a lightweight fabric, meaning it adds minimal bulk and is unlikely to be noticed by guests. The elasticated corner straps help keep the protector firmly in place through the night without displacement, which reduces the risk of guest complaints and the need for mid-stay rectification by housekeeping.

From an operational standpoint, the key practical advantages are:

• Machine washable at 40°C, supporting standard laundry workflows
• Lightweight construction at 460g, making handling and changeovers straightforward
• Reversible design extends usable life between laundry cycles
• Elasticated corners secure the fit without clips or ties
• Slim profile keeps the guest sleeping surface largely unchanged

This protector is best suited to budget-conscious properties managing high bed occupancy, where reliability and ease of laundering take priority over premium padding or moisture-barrier performance. It is not intended as a substantial comfort layer or a fully waterproof protector. Properties requiring stronger liquid resistance or deeper quilting would be better served by a heavier-specification option.

If you are equipping a new property or reviewing your linen specification across multiple room types, we are happy to help you match the right level of protection to your occupancy profile and laundry setup.

The Mitre Luxury Tencel Superior Mattress Topper is a quilted topper designed for hotel and hospitality environments where guest sleep quality is a priority. It uses a blended fill of 30% Tencel and 70% polyester hollowfibre at a 1000g/m² weight, which provides a noticeably softer surface feel over a standard mattress without the maintenance complications of a heavier wool or down product. The cover is a 100% polyester microfibre, and the topper fits via elasticated corner bands rather than a full encasement, which simplifies the changeover process for housekeeping teams.

In a hotel or serviced accommodation setting, this topper sits above the standard range and below a full luxury-grade product, making it a practical choice for properties looking to elevate the guest experience without significantly increasing laundry complexity or replacement cost. The Tencel component helps with moisture management during the night, which is a practical consideration in rooms that see consistent occupancy.

• Blended Tencel and hollowfibre fill for comfort and breathability
• 1000g/m² quilted construction for a consistent surface feel
• Elasticated band fitting for straightforward housekeeping changeover
• Polyester microfibre cover suitable for commercial laundering
• Sits within a tiered range, allowing properties to match specification to room grade

It is worth confirming your laundry capacity and wash temperature requirements before committing to volume, as fill weight and cover material can affect cycle times. If you are equipping rooms across different categories, Mitre offer toppers at varying specifications to suit different room grades.

If you are unsure whether this topper is the right specification for your property or room mix, the team is happy to talk it through.

The Mitre Comfort Quiltop Pillow Protector is a housewife-style pillow protector with a hollowfibre filling and a soft polyester microfibre cover. It fits over a standard pillow and fastens with a flap closure, forming a protective barrier between the pillow and the pillowcase.

In a hotel or guest accommodation environment, pillows are subject to repeated use, body moisture, spillages, and general soiling. Without protection, even a well-specified pillow will degrade in condition relatively quickly, requiring more frequent replacement. A pillow protector of this type acts as a first line of defence, absorbing and dispersing moisture before it reaches the pillow itself, which helps maintain hygiene standards and extend the serviceable life of the bedding stock.

The hollowfibre layer adds a degree of softness to the surface, which means the protector contributes to guest comfort rather than simply acting as a utilitarian barrier. The polyester microfibre cover is practical from a laundry perspective — it washes cleanly and dries efficiently, which matters when managing high linen turnover.

• Guards against spills, body moisture, and staining to preserve pillow condition
• Hollowfibre filling adds surface softness without significantly altering pillow feel
• Housewife flap closure keeps the protector securely in place during use
• Polyester microfibre cover launders efficiently at volume
• Helps maintain acceptable hygiene standards between deep cleans

This protector is well suited to guest houses, budget and mid-range hotels, and serviced accommodation where cost-effective pillow protection at volume is a priority. For higher-specification properties with premium pillow stock, a heavier or more feature-rich protector may be worth considering.

If you're sourcing protectors for a larger property and want to discuss quantities or suitability for your linen programme, the team is happy to help.

The Mitre Luxury Tencel Superior Mattress Topper is a quilted bed topper designed for hotel and guest accommodation use. It sits over the mattress and adds a layer of softness and comfort, helping to extend the feel of the sleeping surface without replacing the mattress itself. The filling combines Tencel fibre with polyester hollowfibre, and the cover is a polyester microfibre. It fits a metric single bed and is secured with elasticated corner bands.

In a hotel or serviced accommodation setting, mattress toppers take considerable wear through repeated laundering and heavy guest turnover. The Tencel fibre content helps manage moisture and temperature during use, which is a practical consideration for properties where guest comfort reviews matter. The 1000g/m² quilted construction gives it more body than a standard entry-level topper, which tends to compress quickly under regular use.

From an operational standpoint, this topper offers a few clear advantages for housekeeping teams:

• Elasticated corner bands allow fast, consistent fitting during room turnaround
• Quilted construction helps the topper hold its shape wash after wash
• Tencel filling aids moisture regulation, reducing guest discomfort overnight
• Microfibre cover is smooth and easy to dress with bed linen
• Metric single sizing suits modern continental bed frames commonly found in newer properties

It is worth noting that this topper is sized to the metric single standard, which differs slightly from the traditional UK single. Properties with older bed frames should confirm the bed dimensions before ordering in volume. For higher-volume properties or those replacing toppers across many rooms, it is worth discussing order quantities with the team to ensure consistent stock.

This topper is well suited to hotels, guest houses, and serviced apartments looking for a step up from a basic protector without moving to a full luxury tier. Properties seeking a lighter or heavier specification will find alternatives within the range.

If you are equipping multiple rooms or want to discuss which topper specification suits your property best, the team is happy to help you work through the options.