True Glass Door Display Fridges

The True T-49G-HC is a large-capacity upright refrigerator fitted with full-length glass doors, built to True's commercial foodservice specification. It stores substantial volumes of chilled product while keeping contents fully visible without opening the cabinet — a practical advantage in busy service environments where stock visibility directly affects workflow and reduces unnecessary handling.

True has a well-established reputation for refrigeration equipment that holds consistent temperatures under the demands of continuous commercial use. The cabinet construction and insulation are engineered to maintain stable internal temperatures even through frequent door openings, which is where less robustly built units often struggle during a busy lunch or dinner service. The HC designation reflects a refrigerant specification with a lower environmental impact, in line with the current direction across the industry.

Units of this size are commonly used across a range of commercial settings:

• Front-of-house display for beverages, prepared foods, or desserts
• Back-of-house pass or larder storage where visibility reduces handling errors across shifts
• High-volume prep kitchens requiring accessible cold storage close to the point of use

The self-contained refrigeration system requires no remote condensing unit, which simplifies installation considerably. That said, a cabinet of this size does generate condenser heat, and adequate ventilation in the installation space should be assessed carefully before positioning — particularly in smaller or poorly ventilated back-of-house areas where heat build-up can affect both unit performance and the working environment.

This model is well suited to hotels, contract caterers, large restaurants, and event catering operations running continuous service periods. Sites with more modest storage requirements or tighter floor space may find a single-door or smaller-capacity unit a better fit, while very high-volume operations might benefit from a multi-unit configuration or a larger alternative.

If you would like to talk through whether this unit suits your site layout, service volume, or installation setup, the team is happy to help before you commit to a decision.

The True TSD-09G-HC-LD is a counter-top display refrigerator with sliding glass doors, designed to keep chilled, packaged products visible and accessible at the point of sale. It sits on a counter or servery unit and is commonly used for pre-packaged food, chilled beverages, and grab-and-go lines where product visibility directly supports sales. The sliding door configuration allows fast, repeated access from the service side without the swing clearance that hinged doors require — a practical advantage in tighter front-of-house layouts.

True Refrigeration has a well-established reputation in commercial refrigeration, and day-to-day performance reflects that. Where cheaper display units tend to struggle with continuous door opening during busy periods, True's refrigeration systems are engineered to recover quickly and hold consistent cabinet temperatures throughout service. The hydrocarbon refrigerant used in HC-specification models carries a lower global warming potential, which is increasingly relevant for operators working toward green procurement commitments or looking to future-proof their equipment choices.

From an operational standpoint, this unit offers a number of practical advantages:

• Sliding doors reduce aisle obstruction and allow faster service access
• Full glass front maximises product visibility without opening the cabinet
• LED lighting keeps displayed products well lit with minimal heat contribution
• Low-profile counter-top design suits under-counter and service bar installations
• Hydrocarbon refrigerant reduces long-term environmental impact

Installation is straightforward — the unit requires a standard single-phase power supply and adequate ventilation around the cabinet. It should not be positioned flush against a wall or in an enclosed space without sufficient airflow, as restricted ventilation will affect refrigeration efficiency and longevity. The supporting counter surface should be level and rated for the unit's loaded weight. This unit is intended for finished or packaged chilled goods and is not suitable for raw protein storage.

This unit is well suited to cafés, coffee shops, delis, convenience-style food service operations, and front-of-house service counters where chilled grab-and-go lines are a regular part of the offer. For higher-volume or back-of-house chilled storage requirements, a larger reach-in or multi-door alternative may be more appropriate. For sites with very limited counter space, a smaller single-door model may be worth considering instead.

If you'd like to talk through whether this unit fits your counter layout, service volume, or existing refrigeration setup, we're happy to have that conversation before you place an order.

The True TUC-24G-HC is a single glass door undercounter refrigerator from True's established TUC range, built for commercial foodservice use from the ground up. At 158 litres, it sits in a practical mid-capacity position — compact enough to slide beneath a standard preparation counter, yet sufficiently roomy to hold a meaningful amount of refrigerated stock at the point where it is actually needed. The glass door allows kitchen staff to identify contents without breaking the cold seal, which has a genuine impact during a busy service when repeated, unnecessary door openings are a common source of temperature instability.

True has built the TUC range around a forced-air refrigeration system rather than static cooling. In a working kitchen that distinction matters. Forced-air circulation maintains an even temperature throughout the cabinet even when the door is opened frequently during peak service. Static systems can struggle to recover quickly under those conditions, leading to temperature drift that has implications for both food safety and product quality. True's recognised commercial build standard translates to the kind of day-to-day reliability that operators need from equipment that cannot afford to fail mid-service.

From a practical standpoint, the unit offers several operational advantages worth noting:

• Glass door reduces unnecessary openings by making stock immediately visible
• Forced-air system supports consistent holding temperatures across the full cabinet
• Undercounter format keeps refrigerated stock to hand without consuming worktop space
• R290 hydrocarbon refrigerant aligns with current UK and European environmental requirements
• Commercial build quality suited to continuous daily use in demanding kitchen environments

Installation requires a standard single-phase electrical supply. As with all undercounter refrigeration, it is worth confirming adequate ventilation clearance around the cabinet before positioning it within a run of equipment. Restricted airflow is one of the more common contributors to compressor wear and inconsistent performance over time. The unit is designed for indoor, temperature-controlled environments and is not appropriate for outdoor or unheated spaces.

This unit is well suited to smaller commercial kitchens, café and bar service areas, and dedicated prep stations where reliable localised refrigeration is needed without the footprint of an upright cabinet. It also works sensibly as a secondary unit in larger operations where chilled stock needs to be staged close to a specific workstation. Sites with significantly higher throughput or storage demands may find a larger undercounter or upright model within the True range a better fit.

If you would like to talk through whether this unit suits your kitchen layout or service pattern before making a decision, we are glad to help.

The True T-23G-HC is a single-section upright refrigerator with a full-height glass door, built for commercial foodservice environments where consistent temperature holding and clear product visibility are everyday requirements. It is a well-established unit across restaurants, cafés, bars, and food retail settings — environments where staff need to locate and retrieve chilled product quickly during a busy service without standing with the door open longer than necessary.

True Refrigeration has a strong reputation for temperature stability under sustained heavy use, and the T-23G-HC is consistent with that. The refrigeration system recovers effectively after repeated door openings — a practical point that specification comparisons tend to understate. The HC designation indicates a hydrocarbon refrigerant, which carries a lower global warming potential than many legacy refrigerant types. This aligns with current environmental compliance direction without any compromise to day-to-day performance.

From an operational standpoint, the cabinet offers several advantages worth noting:

• Glass door lets staff identify product at a glance, reducing unnecessary door openings during service
• Reliable temperature recovery after repeated access during peak periods
• Suitable for front-of-house positioning where product presentation matters
• Interior layout supports straightforward clean-down between services
• Hydrocarbon refrigerant supports current environmental compliance requirements

Installation is relatively straightforward. The unit runs on a standard single-phase supply and does not require specialist electrical work in most settings. That said, adequate clearance to the rear and above is important — restricted airflow around the cabinet will affect refrigeration efficiency, and this is worth factoring into the siting plan. If the intended location runs warm or has limited ventilation, it is worth a conversation before purchase, as ambient conditions have a greater effect on real-world performance than the specification alone suggests.

This cabinet is well suited to single-site restaurants, cafés, bars, and similar operations with moderate chilled storage and display needs. Where a larger multi-door unit would be oversized for the volume, the T-23G-HC is a sensible, proportionate choice. For higher-volume operations or sites with significantly greater chilled storage demands, a larger multi-section unit is likely to be a better fit.

If you would like to talk through whether this cabinet suits your space, service pattern, or installation setup, the team is available to help you work that out before you commit.

The True T-15G-HC is a single-section upright refrigerator with a full-height glass door, built for foodservice environments where product visibility and consistent chilled storage need to work together. It sits within True's established commercial refrigeration range and is commonly found in cafés, delis, hotel serveries, and front-of-house grab-and-go areas where staff or customers need to identify contents quickly without opening the door repeatedly.

True has a well-regarded reputation in the commercial refrigeration sector for producing units that hold temperature reliably through continuous service. The glass door allows visual stock checks without introducing the temperature fluctuation that comes with repeated door opening, which matters during busy service periods when the cabinet is being accessed frequently. The cabinet construction is designed for the demands of daily commercial operation rather than light or occasional use.

From an operational standpoint, the main advantages this unit offers are:

• Clear product visibility supports faster service and more informed stock rotation
• Consistent temperature hold reduces food safety risk during peak trading periods
• Self-contained refrigeration system keeps installation straightforward
• Robust cabinet build suited to continuous daily commercial use
• Interior layout accommodates a practical range of foodservice packaging formats

As a self-contained unit, it does not require remote condensing equipment, which simplifies siting considerably. That said, adequate ventilation clearance around the condenser is important — placing the unit in a poorly ventilated or unusually warm environment will affect efficiency and could shorten service life. It is worth confirming the proposed location meets True's clearance recommendations before installation, and verifying the electrical supply at your site is compatible before ordering.

This refrigerator is well suited to smaller foodservice operations, servery counters, and front-of-house display areas, or as a supplementary chilled unit alongside larger back-of-house refrigeration. For higher-volume sites requiring greater capacity or multi-door configurations, a larger unit from the True range may be more appropriate.

If you would like to talk through whether this model suits your site layout or service requirements before ordering, the team is glad to help.