Instanta WMS2 2.5 Ltr Wall Mounted Water product image
Instanta WMS2 Wall Mounted Water Boiler - Advantage Catering Equipment
Instanta WMS2 Wall Mounted Water Boiler - Advantage Catering Equipment

Instanta

Instanta WMS2 2.5 Ltr Wall Mounted Auto-Fill Water Boiler

SKU: WMS2
Barcode: 0791689617336

£543.00(£651.60 inc VAT)
Get a quote

Request a callback

Leave your details and we will call you back about Instanta WMS2 2.5 Ltr Wall Mounted Auto-Fill Water Boiler.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 2
  • In the event of equipment failure an engineer will be sent for an onsite repair 2
  • Equipment may be supplied with a moulded plug but may be more suitably connected to a fused spur
  • Equipment that should be connected to a suitably rated outlet - must be installed by a competent person
  • This product is Made in Britain

The Instanta WMS2 is a compact, mains-fed water boiler designed to mount directly to the wall, keeping the worksurface clear while maintaining a ready supply of hot water. At 2.5 litres, it draws continuously from the cold mains supply and refills automatically, so there is no manual topping up required during service.

In practice, this unit performs reliably in settings where hot water demand is steady rather than intense — a back-office tea point, a staffroom, a waiting area, or a satellite beverage station within a larger operation. The auto-fill mechanism means staff do not need to manage the unit during service, and because it maintains a heated reservoir throughout the day, hot water is available on demand without delay.

The wall-mounted format brings several practical advantages worth noting:

  • Frees the worksurface entirely for preparation or service use
  • Non-drip tap reduces spillage and keeps the area beneath clean
  • Stainless steel casing wipes down quickly and stands up to daily use
  • Mains auto-fill removes any manual water management during service
  • Fixed wall position keeps the unit stable and out of the flow of work

Installation requires a cold mains water connection routed to the mounting position and a suitable power supply — a hardwired connection is recommended for any permanent installation rather than relying on a standard socket. Wall fixings must be appropriate for the unit's loaded weight, and it is worth confirming adequate clearance beneath the tap for the cups or jugs in use. Routine descaling is a standard maintenance requirement, so access to the inlet and internal components should be factored into where the unit is positioned — particularly in hard water areas.

This model is well suited to low-to-moderate demand environments: small cafés, office kitchens, healthcare waiting areas, or supplementary hot water points on larger sites. Where a site needs to support continuous high-volume drink service through a busy period, a higher-capacity unit would be a more dependable choice.

If you are unsure whether this capacity matches your expected demand, or you want to talk through the installation before ordering, the team is glad to help you work it out.

Frequently asked questions

Is the WMS2 suitable for a busy café serving drinks continuously throughout the day?

At 2.5 litres, this unit is best suited to steady, moderate demand rather than continuous high-volume service. It performs well as a secondary hot water point or in lower-footfall settings, but a site serving a constant flow of hot drinks through peak periods would generally benefit from a higher-capacity model.

What installation work is required before fitting the WMS2?

You will need a cold mains water feed run to the mounting position and an appropriate electrical supply — a hardwired connection is recommended over a standard plug socket for any permanent installation. Wall fixings must be rated for the unit's weight when fully loaded with water, and you should confirm there is sufficient clearance beneath the tap for the cups or containers in use before finalising the position.

How often does the WMS2 need descaling, and does the wall-mounted position make that difficult?

Descaling frequency depends on local water hardness — in hard water areas you may need to descale more regularly than in soft water regions. It is worth considering access to the unit's inlet and internal components when choosing where to mount it, as awkward positioning can make routine maintenance more time-consuming than it needs to be.
Instanta WMS2 2.5 Ltr Wall Mounted Auto-Fill Water Boiler

£543.00(£651.60 inc VAT)

£543.00(£651.60 inc VAT)

The Instanta WMS2 is a compact, mains-fed water boiler designed to mount directly to the wall, keeping the worksurface clear while maintaining a ready supply of hot water. At 2.5 litres, it draws continuously from the cold mains supply and refills automatically, so there is no manual topping up required during service.

In practice, this unit performs reliably in settings where hot water demand is steady rather than intense — a back-office tea point, a staffroom, a waiting area, or a satellite beverage station within a larger operation. The auto-fill mechanism means staff do not need to manage the unit during service, and because it maintains a heated reservoir throughout the day, hot water is available on demand without delay.

The wall-mounted format brings several practical advantages worth noting:

  • Frees the worksurface entirely for preparation or service use
  • Non-drip tap reduces spillage and keeps the area beneath clean
  • Stainless steel casing wipes down quickly and stands up to daily use
  • Mains auto-fill removes any manual water management during service
  • Fixed wall position keeps the unit stable and out of the flow of work

Installation requires a cold mains water connection routed to the mounting position and a suitable power supply — a hardwired connection is recommended for any permanent installation rather than relying on a standard socket. Wall fixings must be appropriate for the unit's loaded weight, and it is worth confirming adequate clearance beneath the tap for the cups or jugs in use. Routine descaling is a standard maintenance requirement, so access to the inlet and internal components should be factored into where the unit is positioned — particularly in hard water areas.

This model is well suited to low-to-moderate demand environments: small cafés, office kitchens, healthcare waiting areas, or supplementary hot water points on larger sites. Where a site needs to support continuous high-volume drink service through a busy period, a higher-capacity unit would be a more dependable choice.

If you are unsure whether this capacity matches your expected demand, or you want to talk through the installation before ordering, the team is glad to help you work it out.