Werzalit plus

This 800mm square Werzalit table top is a practical, pre-drilled surface designed for commercial indoor and outdoor use. Made from high-density woodchip with a heat-sealed decorative finish, it comes in the Blanchas Red colourway — a distinctive choice that works well in cafés, bars, restaurants, and canteen environments where surface durability is as important as appearance.

The heat-sealed construction gives the top meaningful resistance to the conditions common in busy hospitality settings: spills, cleaning chemicals, temperature fluctuations, and the general wear of heavy daily use. The slightly convex surface profile encourages rainwater to drain away, which makes it a practical option for covered outdoor terraces and beer gardens where tables often need to be ready for use between services with minimal attention.

From an operational standpoint, this top offers several practical advantages:

• Pre-drilled for straightforward fitting to compatible table bases
• Smooth, sealed surface cleans quickly between covers
• Resistant to common cleaning chemicals and surface impacts
• Suitable for outdoor use without requiring seasonal storage
• Consistent colour finish across the surface — no visible joins or seams

At 800mm square, this top suits two-cover settings comfortably and can be pushed together for larger parties where layout allows. It is worth confirming base compatibility before ordering, as the pre-drilled fixing pattern will need to match your existing or intended base hardware. The top weighs 3.7kg, so it is straightforward to handle during setup and repositioning.

This size is well suited to small to mid-sized hospitality venues looking for a durable, weather-tolerant table surface. For higher-traffic venues or applications where larger table sizes are needed, alternative tops in the Werzalit range may be worth considering.

If you are unsure whether this top is compatible with your existing bases or are specifying tables for a new fit-out, our team is happy to talk it through with you.

The Werzalit square table top is a commercial-grade surface built from heat-sealed woodchip with a melamine-finish face. At 800mm square, it is a standard catering size that suits a range of table bases commonly found in restaurants, cafés, pubs, and outdoor hospitality settings. The Blanchas Blue colourway gives operators a defined, consistent look without the maintenance burden of painted or lacquered surfaces.

In service, the heat-sealed construction holds up well against the everyday wear that hospitality environments produce — spillages, repeated wiping, heavy crockery, and the general impact that comes from a busy dining floor. The sealed edging is a practical feature in this context: it prevents moisture ingress at the most vulnerable point of the top and makes cleaning straightforward without risk of dirt becoming trapped in exposed edges or seams.

Key practical advantages for operators include:

• Resistant to UV exposure and heat, making it suitable for covered outdoor terraces
• Impact-resistant surface handles the knocks of daily service and stacking
• Heat-sealed edges reduce the risk of delamination and simplify cleaning routines
• Consistent colour across the surface — no visible grain variation to manage
• Compatible with most standard-pitch contract table bases

At 9.2kg, this top is manageable for front-of-house teams to reposition or store at the end of service. It is worth confirming base compatibility before ordering — the 800mm format works across a wide range of spider and tulip-style bases, but column spacing and fixing patterns do vary between manufacturers.

This top suits cafés, casual dining restaurants, pub gardens, and any setting where a consistent, low-maintenance table surface is needed for moderate-to-heavy footfall. If you are outfitting a site with particularly high turnover or require a different size or finish, it is worth discussing your full requirements with the team before placing an order.

The Werzalit 800mm round table top is a practical, hard-wearing surface designed for commercial dining environments. Constructed from high-density woodchip with a fully exterior-grade foil finish, it presents a concrete effect that works well in contemporary front-of-house settings — cafés, restaurants, pub dining rooms, and outdoor terraces alike.

In a busy service environment, table tops take a considerable amount of punishment. The exterior foil on this top is heat-sealed and provides meaningful resistance to impact, surface scratches, cigarette burns, and everyday chemical cleaning agents. That combination of properties is what makes it viable outside as well as in — it handles moisture and UV exposure without the warping or delamination that affects lesser-quality tops over time.

From an operational standpoint, this top offers several practical advantages worth noting:

• Concrete-effect finish suits a range of contemporary interior and exterior schemes
• Pre-drilled centre hole fits most standard universal table bases
• Exterior-grade foil resists cleaning chemicals, reducing surface degradation over time
• Suitable for both indoor and covered outdoor use
• Lightweight at 6.7kg, making repositioning and seasonal moves straightforward

Installation is straightforward — the top arrives pre-drilled and is ready to mount directly onto a compatible universal base. No additional preparation is required, which is useful when fitting out multiple covers or replacing worn tops across a fleet of tables. It is worth confirming base compatibility before ordering, as thread sizes and plate dimensions vary between manufacturers.

This top is well suited to cafés, casual dining restaurants, hotel bars, and similar operations looking for a durable, low-maintenance surface with a contemporary finish. It is sized for two covers in most dining layouts. For larger group settings or communal table arrangements, rectangular or larger-diameter tops may be more appropriate.

Please note that this product is ordered directly from the manufacturer and is therefore excluded from the standard 30-day return policy.

If you are fitting out a number of tables or want to confirm base compatibility before placing an order, we are happy to help.

The Werzalit 700mm square table top is a practical, hard-wearing surface finished in a concrete effect, designed for use in commercial hospitality environments. Manufactured from high-density woodchip board with a fully sealed exterior foil, it provides a consistent, wipe-clean surface that holds up well in day-to-day service without the maintenance demands of natural materials.

In operational terms, the sealed surface resists the kind of wear that hospitality tables typically encounter — spilled drinks, cleaning chemicals, and prolonged exposure to outdoor weather. The slight camber across the surface encourages liquid to run off rather than pool, which helps keep tables looking presentable during busy service periods without staff having to attend to them constantly. This makes the top equally suitable for sheltered outdoor terraces and indoor dining areas.

A few practical points worth considering before ordering:

• Pre-drilled for straightforward fitting to a compatible pedestal or base
• Exterior foil surface resists acids, weathering, and thermal pressure from hot vessels
• Suited to both indoor use and permanent outdoor installation
• Concrete-effect finish works well in contemporary or industrial-style interiors
• Lightweight at 6.7kg, making repositioning manageable for front-of-house staff

The pre-drilled fixing points simplify installation onto a suitable base, though it is worth confirming base compatibility before ordering — fixing centres and base thread specifications vary between suppliers, and mismatches are a common source of delay. The top is 700mm square, which suits two covers comfortably and is a commonly used size in café, bar, and restaurant settings where space is at a premium.

This size works well for smaller dining areas or high-turnover covers. Operators fitting larger venues or requiring bigger table surfaces should consider whether a larger format would better suit their layout.

These tops are ordered specifically from the manufacturer, so lead times and return conditions differ from stocked items — if you have questions about compatibility with an existing base or which size suits your floor plan, we are happy to help you work through that before you order.

This Werzalit table top is a 600mm square surface finished in a Travertin décor, supplied pre-drilled for fitting to standard commercial table bases. It is built from high-density woodchip board with an exterior-grade foil bonded to both the top and underside, giving a consistent finished appearance on both faces while helping to prevent moisture ingress and the warping that can develop over time in busy front-of-house environments.

Werzalit tops are a well-established choice in cafés, restaurants, and pub dining areas precisely because of how reliably they hold up to daily service. The exterior foil offers reasonable resistance to incidental spills, heat from cups and plates, and the cleaning chemicals typically used between covers. It is not suited to prolonged standing water or heavy sustained impact, but under normal front-of-house conditions it performs consistently without demanding much attention from the team.

From an operational standpoint, the pre-drilled fixing points reduce assembly time on site and are compatible with most standard commercial base fittings. The sealed surface wipes down quickly and supports the hygiene standards expected in professional catering environments. Practical points worth noting:

• Exterior-grade foil on both surfaces resists moisture and routine cleaning chemicals
• Pre-drilled fixing holes suit most standard commercial table base fittings
• Travertin finish works across a range of front-of-house interior schemes
• At under 5kg, the top is easy to reposition during floor resets
• Fully sealed edges and surfaces support straightforward hygiene maintenance

At 600mm square, this top is well suited to two-cover settings — café pairs, compact restaurant tables, or bar-height arrangements. For larger covers or communal dining configurations, wider formats are available within the Werzalit range.

If you are specifying tops across a full fit-out or need to confirm compatibility with an existing base fixing pattern, we are happy to talk it through before you order.

This square table top from Werzalit is constructed from high-density woodchip with a heat-sealed decorative surface in a Travertin finish — a warm, stone-effect pattern with a subtle natural character. It comes pre-drilled for straightforward fitting to a compatible table base, making it a practical choice when replacing worn surfaces or fitting out new covers.

The heat-sealed surface is designed to handle the day-to-day demands of commercial hospitality use. It offers reasonable resistance to spillages, light impacts, and surface burns, and the slightly bowed profile encourages water to run off rather than pool — a useful feature for outdoor terraces or any table that sees heavy wet-cloth cleaning throughout service.

For operators, the key practical advantages are:

• Low-maintenance surface that wipes clean quickly between covers
• Pre-drilled fixing points reduce fitting time when paired with a compatible base
• Heat-sealed decor resists routine spillages and surface moisture
• Suitable for both indoor and sheltered outdoor use
• Consistent Travertin finish works across mixed seating environments

It is worth noting that while the surface holds up well under normal hospitality use, it is not intended for fully exposed outdoor settings with prolonged direct weather exposure. For high-turnover sites with very heavy outdoor use, a solid resin or fully weatherproof top may be worth considering. These tops are ordered directly from the manufacturer, so lead times and returns conditions differ from stock items — worth bearing in mind when planning a larger fitout.

This top is well suited to cafés, bars, bistros, and restaurant dining areas where a clean stone-effect finish is needed without the weight or cost of a natural stone surface. It works equally well front-of-house or in a covered outdoor area.

If you are fitting out multiple tables or are unsure which base configuration is compatible, the team is happy to talk through the options with you before you order.

The Werzalit 700mm square table top in Travertin finish is a commercial dining surface built from high-density woodchip board and encased on both faces in a fully exterior-grade foil. It arrives pre-drilled, meaning fixing points are already in place for fitting to compatible pedestal or frame bases — a practical detail that saves time during a fit-out or when replacing worn tops across an existing dining area.

Commercial table tops take a consistent daily battering: hot crockery, spilled liquids, repeated wiping with chemical cleaning agents, and the general impact of a busy service. The exterior foil on this Werzalit top is well suited to that environment. It resists mechanical wear, handles thermal stress from hot tableware, and holds up against the cleaning products commonly used in professional catering without the surface degrading over time. The smooth, sealed finish also means there are no grout lines or surface texture to trap food debris between covers.

The Travertin stone-effect finish is a neutral, versatile choice that works across a range of hospitality interiors without dictating a specific design direction. Key practical advantages include:

• Exterior-grade foil sealed on both top and bottom surfaces, limiting moisture ingress
• Resistant to cleaning chemicals standard in commercial catering environments
• Pre-drilled fixing points for straightforward installation to compatible bases
• Smooth surface cleans down quickly between covers with no debris traps
• Consistent finish across multiple tops for uniform dining room presentation

At 700mm square, this top comfortably seats two covers and can be arranged alongside others for larger parties. It is worth confirming the fixing pattern is compatible with your intended base before ordering, as drilling patterns vary between pedestal and frame manufacturers.

This top suits cafés, casual dining restaurants, pub food operations, and hotel dining rooms. If you are fitting out a larger space, need a different format, or are unsure which base configuration is the right pairing, we are happy to talk it through before you commit to an order.

This Werzalit square table top is a straightforward, practical surface choice for cafés, restaurants, pubs, and similar hospitality settings. Constructed from high-density woodchip with a heat-sealed decor finish, it arrives pre-drilled for standard pedestal bases, which removes a step from fitting and helps speed up a new setup or a refurbishment. The white finish gives a clean, unfussy look that works well in a range of interior styles.

Werzalit tops have a long-standing reputation in the trade for holding up under everyday commercial use. The heat-sealed surface resists routine wear, wipes down quickly between covers, and copes with the kind of minor knocks and spills that accumulate during a busy service. The finish also provides reasonable resistance to cigarette burns and short-term heat exposure, which matters in settings where conditions are not always predictable.

From an operational standpoint, the main advantages are:

• Pre-drilled for fast, straightforward fitting to compatible bases
• Heat-sealed surface resists staining and cleans down easily between covers
• Durable construction suited to regular daily use in hospitality environments
• White finish maintains a consistent appearance and is easy to assess for cleanliness
• Suitable for sheltered outdoor use as well as indoor dining areas

At 800mm square, this top suits two covers comfortably and can accommodate three in a pinch, making it a practical choice for cafés, bistros, and pub dining rooms where space is measured carefully. It is worth confirming base compatibility before ordering, as not all pedestal bases share the same drilling pattern. For larger tables or higher-footfall venues where a bigger surface is needed, wider options are available in the range.

If you are unsure whether this size and finish is right for your layout or base specification, we are happy to talk it through before you commit to an order.

The Werzalit Blanchas Red is a 600mm square table top manufactured from high-density woodchip with a heat-sealed decor surface. It comes pre-drilled for straightforward fitting to a compatible table base, making it a practical choice for venues that need to set up or replace tops quickly without specialist tools or additional preparation work.

Werzalit tops have a long-standing presence in commercial catering environments, and the heat-sealed surface is specifically designed to hold up against the everyday demands of a busy service — spilled drinks, hot cups, regular wiping down, and prolonged exposure to the elements when used outdoors. The Blanchas Red finish gives a clean, consistent appearance that tends to maintain its look well over time compared with laminates that can lift or discolour at the edges.

From an operational standpoint, the key practical advantages are:

• Heat-sealed surface resists moisture penetration, reducing swelling or warping over time
• Smooth finish cleans down quickly between covers with minimal effort
• Suitable for both indoor and sheltered or open outdoor use
• Pre-drilled fixing points reduce assembly time when fitting to a base
• Consistent colour finish suits front-of-house environments where appearance matters

At 30mm thick and 3.7kg, this is a lightweight top that suits standard-height bases. It is worth confirming that the pre-drilled hole pattern matches your intended base before ordering, as fixing centres can vary between manufacturers. This top is ordered directly from the manufacturer and is not held as standard stock, so it is worth factoring lead time into any fit-out or refurbishment schedule.

The 600mm square format works well for two-cover settings in cafés, bistros, canteens, and pub gardens. For larger covers or communal seating, a bigger format would be more appropriate — these are available in the same range.

If you are unsure whether the fixing pattern suits your existing bases, or need guidance on quantities for a fit-out, the team is happy to help you get it right before you order.

The Werzalit Blanchas Blue is a 700mm round table top finished with a brushed wood-effect surface in a muted blue colourway. It is built on a heat-sealed woodchip core — a dense, resin-bonded substrate used widely in commercial and laboratory environments for its dimensional stability and hygienic surface properties. The fully sealed finish leaves no exposed grain or pores, which matters in any setting where surfaces need to be wiped down quickly and reliably between covers.

In practice, this type of surface holds up well in busy café, pub, and restaurant environments. The heat-sealed construction resists routine knocks, spills, and the general wear that comes with daily front-of-house use. The 700mm diameter is a practical size for two covers, making it a common choice for smaller dining rooms, beer gardens, pavement terraces, and café interiors where space needs to work efficiently without feeling cramped.

Key practical points worth noting:

• Sealed surface allows fast, hygienic wipe-down between sittings
• Heat-sealed woodchip construction is stable and resistant to routine impact
• 700mm diameter suits two-cover settings and space-efficient layouts
• Blanchas Blue finish suits a range of interior styles from contemporary to relaxed pub settings
• Suitable for covered outdoor use where the surface is protected from prolonged direct rain

At 5kg, the top is manageable for repositioning or seasonal rearrangement, though it will require a compatible table base — the base is sold separately and the fixing arrangement should be confirmed before ordering. It is worth checking that any base you pair with this top uses a standard 700mm fixing plate.

This top suits operators fitting out cafés, casual dining spaces, pub gardens, or flexible seating areas where a clean, low-maintenance surface is a priority. It is available in other colourways if you are coordinating across a larger seating scheme.

If you are specifying several tops across different areas or are unsure about base compatibility, the team are happy to help you work through the options before you order.

This Werzalit square table top is a pre-drilled, ready-to-fit surface designed for use in commercial catering environments. Constructed from high-density woodchip with a fully-exterior foil applied to both the top and bottom surfaces, it is built to handle the day-to-day demands of a busy café, restaurant, or pub dining area. The Ponderosa White finish offers a clean, neutral aesthetic that works well across a range of interior styles.

In practical service conditions, the foil surface resists the kind of mechanical, thermal, and chemical stresses that are common in commercial settings — hot cups and plates, frequent wiping with cleaning agents, and the general wear of consistent daily use. The fully sealed construction means there are no exposed edges or surfaces where moisture or bacteria can take hold, which matters in environments where hygiene standards are a requirement rather than a preference.

• Pre-drilled for straightforward fitting to compatible table bases
• Fully sealed construction supports easy cleaning and hygiene compliance
• Resistant to heat, moisture, and common cleaning chemicals
• Foil applied to top and bottom surfaces for consistent durability
• Neutral finish suits a wide range of commercial interior schemes

At 600mm square, this top is suited to two-cover settings and works well in venues where space efficiency matters — café-style layouts, smaller bistros, or anywhere tables need to be arranged with some flexibility. It is worth confirming compatibility with your existing or intended base before ordering, as the pre-drilled fixing pattern needs to correspond to the base specification.

If you are fitting out multiple covers or are unsure whether this size suits your floor plan and seating arrangement, we are happy to talk it through before you commit to an order.

The Werzalit Blanchas Red is a pre-drilled square table top finished in a distinctive red decorative pattern. Measuring 700mm square, it is manufactured from high-density woodchip with a heat-sealed decor surface — a construction method Werzalit has long used to produce tops that hold up in demanding hospitality settings, both indoors and out.

The heat-sealed surface provides meaningful resistance to weathering, impact, and chemical stress, making it a practical choice for venues where tables take regular punishment from outdoor elements, cleaning products, and heavy daily use. The pre-drilled fixing points simplify fitting to a range of standard pedestal and frame bases, reducing installation time during a fit-out or refurbishment.

• Resistant to weathering, impact, and common cleaning chemicals
• Heat-sealed decor surface handles temperature exposure reliably
• Pre-drilled for straightforward fitting to compatible bases
• Suitable for covered outdoor terraces, beer gardens, and indoor dining areas
• Consistent finish across the range supports coordinated table layouts

At 700mm square, this top suits two-cover settings comfortably and can be paired with most standard-height bases. It is worth confirming base compatibility — particularly bolt-circle diameter — before ordering, as fixings vary between manufacturers. The Blanchas Red finish is a specific colourway ordered directly from Werzalit, so lead times may differ from stocked items.

This top is well suited to casual dining venues, pub gardens, cafés, and bar terraces where a durable, characterful surface is needed without the maintenance burden of natural materials. For operators furnishing larger spaces or needing different sizes or finishes, alternatives are available across the Werzalit range.

If you are unsure about base compatibility or need guidance on quantities for a fit-out, we are happy to help you work through the details before you order.

The Werzalit Montpelier is a 700mm square table top constructed from high-density woodchip board with a fully-exterior foil applied to both the top and bottom surfaces. It comes pre-drilled for straightforward fitting to standard pedestal or fixed bases, making it a practical choice for operators equipping dining areas quickly and consistently.

Werzalit table tops are a well-established choice in commercial hospitality environments precisely because the foil-encapsulated construction resists the kind of everyday punishment that solid timber or laminate alternatives struggle with — spills, cleaning chemicals, heat from cups and plates, and the general wear of a busy service. The sealed surfaces prevent moisture ingress, which matters in environments where tables are wiped down repeatedly throughout the day.

The Montpelier finish offers warm wood tones that sit comfortably in casual dining, pub, café, and bistro settings without requiring the maintenance that natural wood demands. Key practical advantages include:

• Fully sealed surfaces — resistant to moisture, staining and common cleaning agents
• Foil on top and bottom surfaces, reducing warping in humid environments
• Pre-drilled for direct fitting to compatible table bases
• Consistent finish across multiple tops, useful when equipping larger dining areas
• Low maintenance — wipes clean without specialist products

At 700mm square, this top suits two-cover settings comfortably and works well in spaces where maximising covers without overcrowding is a priority. It is not intended for outdoor use without appropriate shelter, as prolonged direct exposure to weather is beyond its design scope.

This top is well suited to pub dining rooms, café fit-outs, staff canteens, and casual restaurant settings. Operators fitting larger communal or banqueting tables should consider rectangular or larger-format options from the same range.

If you are unsure which base configuration or finish works best for your space, we are happy to talk it through before you order.

The Werzalit Montpelier is a 700mm round table top finished in an aged wood grain effect decor. It is manufactured from high density woodchip with a heat-sealed surface layer, giving it a consistent appearance straight out of the box and a practical finish that holds up well under the demands of day-to-day service. At 26mm thick and 5kg, it is a manageable, mid-weight top suited to a wide range of base configurations.

In busy dining environments, table tops take considerable punishment — hot crockery, cleaning chemicals, the occasional knock, and in outdoor settings, prolonged exposure to the elements. The heat-sealed decor surface on the Montpelier is resistant to grease, chemical cleaners, and moderate impact, which means it retains a presentable appearance without needing the same level of careful handling that a solid timber or laminate top might require. It is equally at home in covered outdoor seating areas as it is in an indoor dining room or café.

Practically, this top offers a few straightforward advantages for operators:

• Pre-drilled base fitting reduces assembly time and suits standard pedestal bases
• Heat-sealed surface wipes clean quickly between covers with standard catering sanitisers
• Resistant to cigarette burns, scratches, and surface moisture without specialist treatment
• Consistent decor across the range makes it easy to replace individual tops without visible mismatching
• Suitable for outdoor use without seasonal storage or additional weatherproofing

No additional tools or specialist fitting are required beyond a compatible table base. The pre-drilled fixing points are designed for straightforward self-assembly, though it is worth confirming base compatibility — particularly fixing hole spacing — before ordering. At 700mm diameter, this is a practical size for two covers in a café or restaurant setting, or as a standalone table in a bar or waiting area.

This top suits cafés, restaurants, pubs, hotel dining rooms, and outdoor seating areas where a natural wood effect finish is appropriate and durability under regular cleaning and use is a priority. For larger table configurations or higher-traffic venues requiring greater surface area, wider diameter options are available within the Werzalit range.

Please note that these tops are ordered directly from the manufacturer and are not covered by the standard 30-day return policy. If you are unsure whether this size or finish is the right fit for your space, the team is happy to talk it through before you commit.

The Werzalit pre-drilled round table top is a practical, hard-wearing surface designed for use in commercial catering and hospitality settings. Constructed from high-density woodchip with a fully exterior foil applied to both the top and bottom surfaces, it offers consistent resistance to the everyday mechanical, thermal, and chemical stresses that come with busy front-of-house use. The 600mm round format suits two covers comfortably and works well in cafés, restaurant dining rooms, pub interiors, and staff canteens where space efficiency matters.

The fully sealed foil construction means the surface does not absorb moisture, spills, or cleaning chemicals, which is a meaningful advantage in environments where tables are turned quickly and wiped down repeatedly throughout a shift. The Ponderosa White finish presents a clean, neutral appearance that sits comfortably alongside a range of interior schemes without demanding attention.

• Pre-drilled for straightforward fitting to compatible table bases
• Fully sealed surfaces resist staining, moisture, and common cleaning agents
• Lightweight at 3.7kg, making repositioning and storage practical
• Meets hygiene requirements appropriate for professional catering use
• Neutral Ponderosa White finish suits varied front-of-house settings

At 600mm diameter and 26mm thick, this top is well suited to standard café and restaurant base configurations. It is worth confirming compatibility with your existing or intended base before ordering, as fixing centres and column diameters vary between manufacturers. For larger covers or outdoor terraces, wider diameter options are available within the Werzalit range.

If you are fitting out a number of tables or mixing top sizes and finishes across a site, we are happy to talk through the options before you commit to an order.

The Werzalit 600mm square table top is a practical, pre-drilled surface designed for commercial and hospitality environments where durability and weather resistance matter. Produced with a high-density woodchip core and finished with a fully sealed exterior foil, it presents in a concrete effect that works well across a range of interior styles — from café and bar settings to outdoor terraces.

In day-to-day service, the sealed surface holds up reliably against the knocks, spills, and cleaning routines of a busy hospitality operation. The foil finish resists acids, thermal pressure, and moisture, which means it keeps its appearance through repeated wipe-downs without the surface degrading quickly. A shallow curve across the top encourages liquid to drain away from the centre rather than pooling, which is a small but useful detail when tables are being turned quickly during service.

Key practical advantages include:

• Pre-drilled to accept a wide range of standard table bases
• Sealed surface resists spills, acids, and everyday cleaning chemicals
• Suitable for permanent outdoor placement as well as indoor use
• Concrete finish is neutral enough to complement most schemes
• Lightweight at under 5kg, making repositioning straightforward

Because the top is pre-drilled, it will need to be matched to a compatible base. It is worth confirming the bolt pattern of your chosen base before ordering, as pre-drilled tops are not adjustable once manufactured. These tops are ordered directly from Werzalit and are not held as stock, so lead time should be factored into any fit-out or refurbishment project.

This table top is well suited to cafés, bars, pubs, and outdoor hospitality settings needing a consistent, low-maintenance surface. For operators furnishing larger dining areas or requiring different shapes and sizes, the broader Werzalit range includes a variety of formats worth considering.

If you are unsure which base will work with this top, or need to discuss quantities for a larger project, the team is happy to help you work through the options.

The Werzalit Blanchas Blue is a 700mm square commercial table top constructed from a heat-sealed woodchip core. This manufacturing process bonds wood chip material under pressure with a sealed surface layer, producing a table top that is solid underfoot, resistant to everyday knocks, and straightforward to wipe down between covers.

In a busy front-of-house environment, table tops take considerable punishment — heat from plates, spills, cleaning chemicals, and constant contact. The heat-sealed construction holds up well under this kind of daily use and does not delaminate or swell in the way that lower-grade laminated boards can over time. At 6.7kg, the top has enough substance to sit firmly on a base without feeling lightweight or prone to shifting.

Practically, this top offers several advantages for operators fitting out or refreshing a dining space:

• Smooth sealed surface cleans quickly between sittings without specialist products
• Consistent colour and pattern across the face — no visible grain variation between tops
• Compatible with a wide range of standard pedestal and leg bases
• Suitable for indoor use across traditional and contemporary dining environments
• The Blanchas Blue finish works across neutral, industrial, and coastal-influenced interiors

The 700mm square format is a practical size for two covers and works well in tighter dining rooms or where space between tables needs to be managed carefully. It is worth confirming your base fixing pattern before ordering, as not all bases share a universal fixing arrangement. This top is intended for indoor use — Werzalit does produce outdoor-rated tops if alfresco service is a consideration.

This top suits cafés, restaurants, hotel dining rooms, and similar hospitality settings that need a durable, presentable surface at a sensible cost. If you are furnishing a larger space and want to discuss mixing sizes or finishes, the team is happy to help you work through the options.

The Werzalit Blanchas Red is a 700mm round table top aimed at cafés, bars, restaurants, and outdoor hospitality spaces. It is pre-drilled for straightforward fitting to compatible pedestal bases and is manufactured from high-density woodchip with a heat-sealed decorative surface — a construction that Werzalit have used across commercial furniture for many years.

The heat-sealed surface is the practical core of this top. It resists the everyday impact of busy table service — surface scratches from crockery and cutlery, knocks from trays and chairs, and the residual heat from cups and plates placed directly on the surface. The slightly arched profile encourages rainwater to drain away, which makes the top genuinely suitable for covered outdoor areas and terrace seating without requiring the operator to dry each table between covers.

For front-of-house teams, the main day-to-day advantages are:

• Wipe-clean surface that handles standard hospitality cleaning products
• Pre-drilled fixing points that simplify base fitting and replacement
• Consistent colour finish that holds up under regular outdoor exposure
• Lightweight construction that makes repositioning straightforward for floor staff
• Arched profile that reduces standing water and keeps tables service-ready

Installation is straightforward — the pre-drilled holes align with most standard pedestal bases, though it is worth confirming base fixing patterns before ordering. At 700mm diameter the top suits two-cover settings comfortably. For larger party covers or communal seating, a wider top would be more appropriate.

This top is well suited to cafés, pub gardens, hotel terraces, and bistro-style restaurants looking for a reliable, consistent finish in a bold colour. The Blanchas Red finish works particularly well where operators want a defined visual identity across their outdoor or mixed indoor-outdoor space. If a more neutral or larger format is needed, Werzalit offer the same construction across a range of sizes and finishes.

Please note these tops are ordered directly from the manufacturer and are not covered by a standard returns window — if you have any questions about base compatibility or which size suits your layout, we are happy to talk it through before you order.

The Werzalit Findus is an 800mm square table top constructed from heat-sealed woodchip — a material that has been a reliable choice in commercial hospitality and catering environments for many years. The heat-sealed surface creates a finish that is resistant to everyday knocks, spills and the repeated wiping-down that a busy front-of-house table endures through multiple covers a day.

In practice, this type of surface holds up well in café, canteen and casual dining settings where durability and ease of maintenance matter more than aesthetics alone. The Findus finish gives a consistent, clean appearance that works across a range of front-of-house styles without drawing attention to surface wear over time. At 800mm square, the top provides a practical working area for two covers comfortably, making it a commonly used size in cafeterias, staff canteens, pub dining rooms and university refectories.

Key practical advantages include:

• Heat-sealed surface resists staining and is straightforward to wipe clean between covers
• Compatible with a wide range of commercial table leg bases and frames
• Consistent finish across the surface — no laminate edge to lift or peel
• Suitable for indoor commercial use where moderate durability is required
• Available in a choice of finishes to suit different front-of-house schemes

This table top is supplied as a top only and requires a separate leg base. It is suited to indoor use in lower-humidity environments — it is not rated for outdoor or covered terrace use where prolonged moisture exposure would be a factor. For very high-turnover sites or environments with heavier abuse, a thicker or more heavy-duty surface option may be worth considering.

If you are fitting out a larger space and need guidance on matching tops, base compatibility or finish options, the team is happy to help you work through the options before you order.

The Werzalit 600mm round table top is a practical, hardwearing surface designed for commercial dining environments. It is constructed from high-density woodchip and finished with a fully exterior-grade heat-sealed foil, giving it the appearance of concrete while remaining light enough to handle and reposition without difficulty. The pre-drilled centre hole fits standard universal table bases, so fitting is straightforward without specialist tools or additional components.

In front-of-house settings, these tops perform consistently across a range of conditions. The exterior-grade foil makes them genuinely suitable for covered outdoor terraces and beer gardens as well as indoor dining rooms, which gives operators flexibility that solid timber or laminate tops often cannot match. The surface resists the day-to-day wear common in busy service environments — knocks, spills, cleaning chemicals, and heat from plates and cups — without marking or peeling in normal use.

From an operational standpoint, the practical advantages are straightforward:

• Pre-drilled for immediate fitting to universal pedestal bases
• Exterior-grade foil suitable for indoor and covered outdoor use
• Resistant to impact, scratches, and common cleaning chemicals
• Concrete effect finish suits a range of contemporary front-of-house schemes
• Lightweight construction eases repositioning during service

At 600mm diameter, this top suits two covers comfortably and works well in cafés, casual dining venues, pub dining rooms, and hospitality spaces where table density and flexibility both matter. It is worth noting that these tops are ordered directly from the manufacturer to order, so lead times should be factored into any refurbishment or fit-out planning.

If you are fitting out a new dining space or replacing worn surfaces across a site and want to talk through quantities, base compatibility, or finish options, the team is happy to help you work through the detail before you commit.

The Werzalit Ponderosa Grey table top is a pre-drilled 800mm square surface finished in a textured grey grain effect. It is constructed from high-density woodchip with a heat-sealed decor layer — a manufacturing method Werzalit has long used to produce table tops that hold up in demanding hospitality environments. The Ponderosa Grey finish sits within Werzalit's Scena Bosco collection, offering a neutral, contemporary tone that works across a range of interior and exterior settings.

The heat-sealed surface is the practical core of this product. It resists moisture penetration, sheds standing water quickly, and holds its appearance against the kind of daily wear that comes with busy food and beverage service — spilled drinks, cleaning chemicals, and the repeated contact of crockery and glassware. Indoor settings benefit from the same surface resilience, particularly in high-turnover cafés and casual dining venues where tables are wiped down and reset frequently throughout the day.

• Pre-drilled for straightforward fitting to standard table bases
• Heat-sealed decor layer resists moisture, chemicals, and surface abrasion
• Smooth surface cleans quickly between covers with standard cleaning products
• Suitable for covered outdoor use as well as indoor hospitality environments
• Neutral grey finish sits comfortably within most contemporary schemes

The pre-drilled format means these tops are ready to fit directly onto compatible pedestal or frame bases without additional preparation. It is worth confirming base compatibility before ordering, as drilling patterns and fixing centres vary between manufacturers. At 800mm square, this size suits two covers comfortably and is a practical choice for café-style or bistro layouts where space efficiency matters.

This top is well suited to cafés, bars, restaurants, and managed leisure sites looking for a reliable, low-maintenance surface in a neutral finish. For sites with specific requirements around size, finish, or edge profile, the Werzalit range includes a number of alternatives worth considering. If you are equipping a larger project or want to confirm the right base pairing, the team is happy to help work through the options.

The Werzalit Blanchas Blue square table top is a 600mm commercial-grade surface from the Scena Bosco range, finished in a wood-inspired blue tone. It is constructed from heat-sealed woodchip board, a material widely used in café, bar, and restaurant furniture for its balance of durability and appearance. Pre-drilled fixing holes allow it to be fitted to compatible table bases without specialist tools.

In a busy front-of-house setting, the heat-sealed surface resists everyday wear well. It does not absorb moisture or trap food residue in the same way that open-grain surfaces can, which makes routine cleaning straightforward during and after service. The material also handles exposure to UV light and moderate heat, making it a practical choice for covered outdoor terraces, beer gardens, or any setting where the table sees direct sunlight or occasional contact with warm crockery.

Key practical characteristics include:

• Heat-sealed surface resists moisture, staining, and food residue build-up
• UV-resistant finish suitable for covered outdoor use
• Pre-drilled holes for straightforward assembly onto standard bases
• Resilient to everyday mechanical contact and surface pressure
• Lightweight at under 5kg, making repositioning easy for staff

At 600mm square, this top suits two-cover dining or compact café layouts. It is a standard footprint that pairs with a wide range of pedestal and four-leg bases. If your space requires a different size or a round profile, other options are available within the Werzalit range.

If you are fitting out a number of tables or are unsure which base configuration will suit your floor layout, we are happy to talk it through before you order.

The Werzalit Montpelier 600mm round table top is a pre-drilled commercial table surface constructed from high-density woodchip with a fully-exterior foil applied to both the top and bottom surfaces. The Montpelier finish presents warm, natural wood tones that suit a range of hospitality environments without looking out of place in either traditional or contemporary settings.

Werzalit table tops are a practical choice for busy food service environments precisely because the foil surface is designed to resist the kind of daily wear a commercial table endures — repeated cleaning with chemical agents, the heat from cups and plates, and the general mechanical wear of heavy footfall service. The sealed construction means there are no exposed edges or absorbent surfaces for moisture or bacteria to penetrate, which supports straightforward compliance with catering hygiene standards.

From an operational standpoint, the key advantages are:

• Resistant to common chemical cleaning agents used in commercial kitchens and front-of-house areas
• Fully sealed top and bottom surfaces prevent moisture ingress and warping
• Pre-drilled for straightforward fitting to compatible table bases
• Lightweight at 3.7kg, making repositioning and setup practical for smaller teams
• Easy to wipe clean during and between services

At 600mm diameter, this top is well suited to two-cover café-style seating or compact dining layouts where space efficiency matters. It works equally well indoors and, given the exterior-grade foil specification, in covered outdoor areas such as terraces or beer gardens where some exposure to the elements is likely.

It is worth confirming base compatibility and fixing centres before ordering, as pre-drilled tops are configured for specific base types. If you are fitting out a larger dining space or need a different diameter, other sizes are available in the range.

If you are unsure whether this top is the right fit for your bases or your setting, we are happy to help you work through the options before you commit.

The Werzalit Findus is a 600mm round table top constructed from heat sealed woodchip, a material widely used in commercial hospitality settings for its balance of durability and practical surface performance. At 3.7kg it is manageable to handle and reposition, making it suitable for front-of-house environments where furniture arrangements change regularly.

The heat sealed surface holds up well under the everyday demands of busy service — hot crockery, spilled liquids, and general wear are handled without significant surface deterioration. The sealed construction also makes hygiene maintenance straightforward; the surface can be wiped down quickly between covers without specialist cleaning products or extended downtime.

In operational terms, the Findus top offers a few practical advantages worth noting:

• Resistant to heat from hot serving ware, reducing the risk of surface marking during service
• Scratch-resistant finish suited to high-turnover café and restaurant environments
• Sealed surface resists moisture ingress, supporting hygiene compliance
• Lightweight enough for easy repositioning between service periods
• Compatible with standard commercial table bases accepting a 600mm round top

The 600mm diameter is a well-established size for two-cover settings in cafés, bistros, and casual dining operations. It works comfortably in tighter floor plans where space between tables needs to be managed carefully. It is worth confirming the fixing compatibility with your existing or intended table base before ordering, as centre hole patterns and fixing methods vary between base manufacturers.

This top is well suited to cafés, pubs, restaurants, and similar hospitality venues looking for a reliable, low-maintenance surface at a practical price point. For larger cover sizes or venues requiring a more substantial surface area, wider diameter options are available within the range.

If you are fitting out a new space or replacing existing tops across a number of tables, it is worth a conversation with us — we can help confirm sizing, base compatibility, and whether the Findus finish is the right match for your environment.

This Werzalit table top is a 700mm square, pre-drilled surface built for commercial front-of-house use. The core is high-density woodchip fully encapsulated on both faces with an exterior-grade foil in a pine finish. It is designed to fit directly onto standard commercial table bases without modification, making it a practical choice for operators fitting out or refreshing a dining space.

The dual-sided foil encapsulation is what separates this top from lower-grade laminate alternatives. By sealing the core on both surfaces, it limits moisture ingress — the primary cause of warping and swelling in table tops exposed to routine spills, cleaning chemicals, and the humidity typical of busy dining rooms. The finish wipes down quickly between covers and holds up well under the chemical and thermal stresses of regular service.

From an operational standpoint, the pre-drilled fixing points save time on installation and reduce the risk of misalignment with base fixings. Key practical advantages include:

• Foil encapsulation on both faces resists moisture and prevents core warping
• Surface tolerates professional cleaning chemicals without deterioration
• Pre-drilled fixing points align with standard commercial base configurations
• Pine finish works across a range of casual dining and café schemes
• Manageable weight keeps handling and repositioning straightforward during setup

At 700mm square, this top comfortably covers a two-cover setting and pairs with pedestal or four-leg bases. Before ordering, it is worth confirming the fixing centres on your chosen base match the pre-drilled pattern — this is not something that can be adjusted on site without additional work.

This top is suited to indoor commercial environments including cafés, restaurants, pubs, and hotel dining areas. It is not rated for outdoor use; if the installation is in a covered terrace or high-moisture area, a fully weatherproof surface would be the more appropriate choice.

If you are sourcing tops and bases together or need to confirm compatibility across a larger fit-out, the team is happy to help you work through the options before you commit.

This is an 800mm diameter round table top from Werzalit, finished in a Travertin stone-effect. It is supplied pre-drilled at the centre for straightforward fitting to a compatible pedestal or table base. The core is high-density woodchip board with a fully-exterior foil applied to both the upper and lower surfaces, sealing the board against moisture ingress and providing a consistent, hard-wearing finish on both faces.

In a front-of-house setting the sealed construction earns its keep quickly. The exterior foil handles the routine mechanical knocks of a busy dining room, resists exposure to the cleaning chemicals common in professional hospitality, and offers reasonable tolerance to incidental heat from crockery and cups during normal service. The Travertin finish suits a range of interior styles from café and bistro through to bar and casual restaurant dining, and holds its appearance under daily use without needing specialist treatment or refinishing.

Practical advantages for operators include:

• Pre-drilled centrally, reducing fitting time when mounting to a standard pedestal base
• Fully sealed top and bottom surfaces reduce warping and delamination risk
• Smooth foil surface wipes clean quickly between covers
• Resistant to cleaning chemicals commonly used in commercial hospitality
• 800mm diameter comfortably seats two covers, or three in informal arrangements

At 800mm this is a practical choice where floor space is at a premium but a proper two-cover table is needed. It is not intended for unprotected outdoor use — without shelter from direct weather exposure the core construction is vulnerable over time. For higher-traffic canteen or banqueting environments, a heavier-duty or larger-format top may be worth considering.

If you are specifying several tops across a site or want to confirm compatibility with an existing base before ordering, the team is happy to talk it through.

The Werzalit Blanchas Red is a 600mm round table top constructed from high-density woodchip with a heat-sealed decorative finish. It arrives pre-drilled for straightforward fitting to a compatible pedestal base, making it a practical choice for operators who need to set up or replace table surfaces without fuss.

The heat-sealed edge and UV-resistant finish mean this top holds up well in outdoor environments — terraces, beer gardens, and pavement seating areas — without the colour fade or edge deterioration that affects lesser materials over time. The slightly convex surface profile encourages rainwater to run off cleanly, so tables dry quickly between covers rather than pooling water on the surface. Indoors, the surface wipes down easily between services, which matters in any busy front-of-house setting.

From an operational standpoint, the key practical advantages are:

• Suitable for outdoor use without additional sealing or treatment
• Convex profile sheds rainwater, reducing turnaround time after wet weather
• Heat-sealed finish resists hot cup and plate contact to a reasonable degree
• Consistent colour finish makes replacement tops easy to match across a venue
• Pre-drilled fixing points simplify fitting to standard bases

At 3.7kg, the top is manageable for staff reconfiguring seating layouts. It is worth confirming base compatibility before ordering — the pre-drilled pattern needs to align with the fixing arrangement on your existing or intended pedestal.

This top is well suited to cafés, pub gardens, casual dining venues, and hotel terraces where durability and low maintenance matter more than premium aesthetics. If you need a larger diameter, a different finish, or a shape better suited to your seating layout, it is worth having a conversation with us before placing an order — we can help you identify the right option for your space.

This is a 700mm square table top from the Werzalit range, finished in Ponderosa White and supplied pre-drilled for straightforward fitting to compatible table bases. The top is constructed from high-density woodchip with a fully exterior foil applied to both the upper and lower surfaces, creating a sealed, uniform finish throughout.

In a commercial catering environment, the sealed foil construction means the surface resists the everyday stresses of service — spills, cleaning chemicals, heat from crockery, and the general wear that comes with continuous use. The pre-drilled format removes the need for on-site preparation and allows for quicker turnaround when fitting or replacing tops across a dining area.

• Fully sealed top and bottom surfaces resist moisture and chemical cleaning agents
• Pre-drilled fixing points ready for standard base fitment
• Hard-wearing foil finish withstands thermal and mechanical stress in daily service
• Easy to wipe down and maintain to catering hygiene standards
• Consistent Ponderosa White finish across the full surface area

Being square at 700mm, this top works well in compact dining rooms, café areas, and spaces where efficient seating layouts are a priority. It is a practical choice for operators who need a clean, neutral-toned surface that will hold up over time without demanding much maintenance attention.

If you are fitting a larger dining space or need a different size or finish to match existing furniture, it is worth having a conversation with us to make sure you get the right combination of top and base for your setup.

The Werzalit Montpelier is an 800mm square table top finished in a warm wood grain effect, made from high density woodchip with a heat-sealed decor surface. It is pre-drilled for standard table bases, making it a practical choice for operators fitting out or refreshing a dining area without the need for specialist tools or bespoke drilling on site.

In commercial hospitality environments, table tops take considerable punishment — heat from plates and cups, spilled drinks, cleaning chemicals, and the daily grind of covers being turned. The Montpelier's heat-sealed surface is designed to resist this kind of wear, and the high density woodchip core gives it the solidity and stability expected from a table top in regular service. It holds up equally well indoors and in covered outdoor settings, making it a versatile option for venues that seat guests in both environments.

From an operational standpoint, the surface offers a few practical advantages worth noting:

• Heat-sealed finish resists grease, chemicals, and everyday surface damage
• Smooth, non-porous surface wipes clean quickly between covers
• Pre-drilled base reduces installation time when fitting to a standard pedestal or frame
• Suitable for both indoor dining rooms and sheltered outdoor areas
• Wood grain effect maintains a consistent, presentable appearance over time

At 800mm square, this top is well suited to a two-cover setting and works comfortably in café, bar, and restaurant environments where space is managed carefully. It is worth confirming base compatibility before ordering — not all table bases share the same drilling pattern, and getting this right before delivery avoids unnecessary delays on site.

This size suits most standard bistro and dining settings. If you are furnishing a larger space or need a different footprint, other sizes are available within the range. Equally, if durability requirements are particularly demanding — high-volume venues or exposed outdoor terraces — it is worth discussing the full range of options before committing.

If you are unsure which size or finish best suits your layout, our team is happy to talk it through with you.

The Werzalit City 241 is a 700mm diameter round table top constructed from high-density woodchip with a heat-sealed decorative surface finish. It is a well-established choice for commercial dining environments where durability and consistent appearance matter, and is available in a concrete effect that works comfortably across a range of interior styles from casual dining to café and bar settings.

In practice, this type of surface holds up well to the rigours of daily front-of-house use. The heat-sealed finish offers meaningful resistance to scratches, impact, and the kind of chemical exposure that comes with regular cleaning and spillage. It is also rated for cigarette burn resistance, which remains a practical consideration in any venue with outdoor seating. Unlike some decorative laminates, the surface does not require specialist cleaning products and is straightforward to wipe down between covers.

Key practical advantages for operators include:

• Resistant to impact, scratches, and common chemical cleaners
• Cigarette burn resistant — suitable for outdoor terraces and smoking areas
• Heat-sealed finish maintains appearance under heavy daily use
• Supplied pre-drilled for straightforward fitting to universal table bases
• Appropriate for both indoor and covered outdoor use

The top is supplied pre-drilled, which removes the need for any on-site preparation before fitting to a standard pedestal or frame base. At 26mm in depth and 5kg, it is light enough to handle easily during setup or rearrangement of a dining floor. It is worth confirming that your existing base fixings are compatible with the pre-drilled pattern before ordering.

This table top is well suited to cafés, restaurants, bars, hotel dining areas, and similar hospitality settings with moderate to high customer throughput. It is a practical mid-range option — if your environment involves particularly heavy or abrasive use, or you need a larger format, there are alternative specifications worth considering.

If you are unsure whether this top will work with your existing bases or the finish suits your space, our team is happy to talk it through with you.