Pre-Rinse Sprays and Hose Reels

This is a deck-mounted pre-rinse unit that combines a spring-action goose-neck spray arm with a lever-operated rose shower head and a separate bowl-filling tap, both sharing the same deck fixing. It carries WRAS approval, meaning it meets UK Water Regulations Advisory Scheme standards for direct connection to mains water supplies in commercial premises. The unit arrives pre-assembled, which removes a reasonable amount of installation complexity at the sink station.

At a busy ware-wash station, a pre-rinse unit is one of the hardest-worked fittings in the kitchen. It handles food debris rinsing from crockery, pots, and trays ahead of the dishwasher, fills sinks during ongoing wash cycles, and supports general station clean-down throughout a full service. Quarter-turn ceramic cartridge taps respond quickly under repeated daily use and are straightforward to service when a cartridge eventually needs attention. The spring-action goose-neck keeps the hose under control between uses, which matters in a tight sink area where a trailing hose creates a practical hazard.

• WRAS approval for compliant direct mains connection in commercial premises
• Pre-assembled unit reduces fitting time and complexity at the sink station
• Quarter-turn ceramic cartridge taps for fast, reliable flow control
• Spring-action goose-neck with rose head for thorough pre-rinse coverage
• Adjustable wall bracket included to manage hose positioning during use

Because this is a deck-mounted unit, it requires a sink with appropriate fixing holes at the correct centres. If you are retrofitting to an existing sink, confirm deck thickness and hole spacing before ordering. WRAS approval means it can typically be connected directly to the mains without a secondary backflow device where regulations permit, though your installer should confirm local requirements. Water connections should be made by a competent plumber.

This unit suits café, restaurant, pub kitchen, and canteen environments where a reliable, compliant pre-rinse setup is needed without unnecessary complexity. For sites running very high continuous dishwasher throughput, it is worth considering whether a more heavy-duty spray unit would better match the workload.

If you are not sure whether this configuration fits your existing sink or water supply arrangement, we are happy to talk it through before you commit to an order.

This is a single-feed pre rinse spray arm unit designed for commercial sink stations. It combines a quarter-turn lever tap with a ceramic cartridge, a spring-action goose neck, and a hand-held spray gun on a flexible hose — the standard configuration for rinsing crockery, pots, and trays before they enter a dishwasher or glasswasher. WRAS approval confirms the unit meets UK Water Regulations Advisory Scheme requirements, which is a prerequisite for mains-connected installation in any commercial premises.

In a working kitchen, a pre rinse unit takes considerable daily punishment. The ceramic cartridge delivers smooth, consistent quarter-turn operation that holds up reliably under repeated use throughout a busy service. The spring-action goose neck keeps the hose clear of the work surface and returns it to a neutral position between uses — a small detail that matters in a pot wash area where workflow and tidiness both count. The unit arrives pre-assembled, and the adjustable wall bracket offers some flexibility when fitting to existing sink structures or varied wall positions.

• WRAS approved for compliant mains water connection in commercial premises
• Ceramic cartridge tap for reliable, long-lasting quarter-turn operation
• Spring goose neck keeps hose tidy and reduces clutter at the sink
• Pre-assembled to reduce installation time on site
• Adjustable wall bracket accommodates varied sink and wall configurations

This unit is well suited to small and medium kitchens with a single sink station. Sites running high-throughput dishwash operations or multiple sink positions may find a heavier-duty or dual-feed configuration more appropriate. Before ordering, it is worth checking the wall bracket reach and hose length against your sink depth and wall-to-sink distance to confirm the fit is right for your setup.

If you are unsure whether this unit suits your sink arrangement or water supply, we are happy to talk it through.

This is a wall-mounted, dual-feed pre-rinse spray unit designed for commercial sink stations. It combines a monobloc tap body with a flexible goose-neck rinse arm, giving the operator independent control of hot and cold water alongside a dedicated spray function for rinsing crockery, pots, and food preparation surfaces. WRAS approval confirms the unit meets UK water regulations — a requirement for any fixture connected to the mains in a commercial kitchen.

In a working kitchen, a pre-rinse arm is a practical tool rather than an optional extra. It speeds up the pre-wash stage before dishwashing, reduces food residue build-up in the sink bowl, and keeps the pot wash area moving during busy service. The quarter-turn lever taps with ceramic cartridges operate quickly under repeated daily use and hold up reliably without dripping or stiffening over time.

• WRAS approved for compliant mains connection in commercial premises
• Quarter-turn ceramic cartridge taps for fast, consistent operation
• Spring-action goose-neck hose for controlled reach and easy positioning
• Lever-operated spray gun for variable rinse pressure at the point of use
• Pre-assembled unit with adjustable wall bracket included for straightforward fitting

Installation requires hot and cold water feeds and a wall surface capable of supporting the bracket. The adjustable bracket gives some flexibility on positioning, though placement should be planned around the sink bowl and drainage to avoid splash issues. This unit is suited to standard sink station use — for high-volume dishwash induction points, a heavier-duty pre-rinse column may be more appropriate.

It is a sensible choice for small to mid-sized kitchens, cafés, pub kitchens, and sandwich or prep operations where a reliable, regulation-compliant rinse point is needed without the complexity of a full column system. If you would like to talk through whether this suits your sink setup or water supply configuration, we are glad to help before you place an order.

The Mechline AquaJet AJPR20-SH is a deck-mounted pre-rinse spray tap designed for pot wash and dishwash stations in commercial kitchens. It uses a single pedestal with twin monobloc water feed connections, lever controls for hot and cold mixing, and a standard spray gun on a flexible hose. The result is a directed, controllable rinse action that working pot wash stations depend on during continuous service.

At the pot wash, a pre-rinse spray is among the hardest-used fittings in the kitchen — handled constantly, often by multiple staff across a shift, with little tolerance for delay or fuss. The lever controls on the AquaJet allow single-handed adjustment of temperature and flow, which matters when staff are moving at pace. The short-style neck keeps spray contained within the sink bowl rather than overshooting, which is particularly useful where overhead clearance is limited or sink bays are compact. A focused spray that efficiently shifts food residue before items enter the dishwasher also reduces the load on each wash cycle, which over time can contribute to lower chemical use and energy consumption.

• Deck-mounted twin monobloc design suits most standard sink station setups
• Lever controls allow rapid, one-handed flow and temperature adjustment
• Short-style neck keeps spray contained in lower-clearance or compact sink bays
• Standard spray gun delivers focused rinse action for efficient pre-scraping
• WRAS approved for compliance with UK water regulations in commercial premises

Installation requires a deck-mounted surface with sufficient thickness to accept the monobloc fitting, along with hot and cold supply connections at standard half-inch male fittings. This is a spray-only unit — there is no bowl filler on this configuration. If your station also requires a fill function, a different configuration within the AquaJet range is worth considering before you order. The WRAS approval is particularly relevant for new installations where building control or water authority sign-off is required.

This unit is well suited to cafés, pubs, school kitchens, care homes, and similar small to medium operations where a reliable, compliant pre-rinse spray is the priority. For very high-volume pot wash areas running continuous back-to-back service, a heavier-duty configuration may be a better fit for the demand placed on it.

If you are unsure whether this configuration suits your sink setup, water supply arrangement, or installation requirements, our team is glad to talk it through before you commit.

This deck-mounted monobloc combines a pre-rinse spray arm and a 12" bowl-filling tap in a single fitting. WRAS approval confirms the unit meets UK Water Regulations Advisory Scheme standards — a requirement for any equipment connected to the mains water supply in a commercial food environment. The unit arrives pre-assembled, which reduces installation time and removes the risk of on-site assembly errors.

In a working kitchen, the pre-rinse station is one of the hardest-worked points in the pot wash or dishwash area. The spray arm allows staff to clear plates, pots, trays, and utensils quickly before loading them into a dishwasher or glasswasher, helping to protect spray arms from debris and extending the intervals between full machine cleaning cycles. Having the bowl-filling tap integrated into the same deck fitting means the station handles both rinsing and filling duties without a second penetration in the sink deck.

For day-to-day operation, the main practical advantages are:

• WRAS approval satisfies water byelaw compliance requirements for commercial installations
• Pre-assembled design simplifies installation and reduces plumber preparation time
• Combined fitting reduces the number of deck penetrations required
• Flexible hose and wall bracket included, ready for connection to hot and cold supplies
• Deck-mounted format suits standard commercial sink fabrications

The unit requires a suitable pre-drilled deck hole of the correct diameter in the sink or fabrication it is fitted to. Hot and cold supplies must be accessible beneath the deck for the flexible hose connections. Installation should be carried out by a qualified plumber with experience of commercial water fittings. For single-sink or pot wash stations this is a straightforward solution, but very high-throughput sites running multiple rinse stations continuously may find a heavier-duty or wall-mounted configuration more appropriate for their demands.

This unit is well suited to cafés, pub kitchens, small to medium restaurants, and contract catering sites where a reliable, compliant everyday pre-rinse station is needed without unnecessary complexity. If you are fitting out a new sink station or replacing an existing unit and want to confirm it is the right choice for your setup, the team is happy to talk it through with you beforehand.

This twin pillar pre-rinse spray unit is built for pot wash and preparation sinks in commercial kitchens. Rather than mounting through the sink deck, it fixes to the wall via an adjustable bracket — a practical arrangement where the sink surface is already occupied or where a more secure, stable fixing point is preferred. WRAS approval confirms the unit meets UK water regulations for connection to the mains supply, which is a compliance requirement in virtually all commercial premises.

In a working kitchen, a pre-rinse unit takes constant, rough-and-ready use throughout service. The quarter-turn lever taps with ceramic cartridges handle that well — they operate quickly under wet or gloved hands and hold up better over time than conventional washer-based designs. The spring-action gooseneck keeps the hose returned to a set position between uses, reducing trailing hose hazards in a busy sink area. The lever spray gun allows controlled, one-handed rinsing, which matters when the other hand is managing crockery or cookware.

• WRAS approved for compliant mains connection in commercial premises
• Ceramic cartridge quarter-turn levers for reliable, low-maintenance operation
• Spring-action gooseneck manages hose position during busy service
• Lever spray gun for controlled, one-handed rinsing
• Adjustable wall bracket included for flexible positioning

The unit arrives pre-assembled, which reduces time on site. Connection to the water supply should be carried out by a qualified plumber. The adjustable wall bracket accommodates most standard sink configurations, making this a straightforward fit for cafés, pub kitchens, school canteens, and similar environments. For very high-throughput pot wash areas running extended shifts, it is worth considering whether a heavier-duty rinse setup would be more appropriate for the workload.

If you want to check this suits your existing sink arrangement before ordering, the team is happy to talk it through.

The Vogue Pedestal Pre-Rinse Spray is a freestanding rinse unit designed for use in commercial dishwash areas. It provides a dedicated point for rinsing dishes, pots, and cookware before they enter the dishwasher, helping to remove food debris and improve wash results. The unit features a twin water feed with mixer taps and a spring-action gooseneck arm, giving operators flexible reach across a sink or rinsing station.

In a working kitchen environment, consistent pre-rinsing makes a meaningful difference to dishwasher throughput and wash quality. By removing the bulk of food soil before the wash cycle, operators can reduce the frequency of filter cleaning and lower the risk of soil redepositing onto other items. The ceramic cartridge tap is designed to resist dripping over time, which matters in a busy kitchen where taps are operated repeatedly throughout a service.

Practical benefits of this unit include:

• Spring-action gooseneck provides flexible directional rinsing
• Ceramic cartridge taps help prevent drips and reduce long-term wear
• Twin water feed allows hot and cold mixing at the tap
• Freestanding pedestal design suits sites without wall-mounting options
• Robust construction suited to daily commercial use

Installation requires hot and cold water supply connections to the pedestal base. The unit is freestanding, so it needs a stable, level floor position close to the dishwash sink or pass-through dishwasher inlet. Because it is a pedestal rather than a wall-mounted unit, it does not require any wall fixings, but floor space and proximity to plumbing should be confirmed before ordering. It is worth checking that the gooseneck reach suits your sink configuration.

This unit is well suited to smaller to medium-sized kitchens, cafés, and pub operations where a straightforward, reliable pre-rinse station is needed without the complexity of a wall-mounted system. Sites with higher throughput or more demanding rinse requirements may benefit from a heavier-duty or higher-flow alternative.

If you are unsure whether this unit suits your sink setup or plumbing configuration, our team is happy to talk it through before you commit to an order.

The Vogue Monobloc Pre-Rinse Spray is a single-body, mixer-tap pre-rinse unit designed for use at commercial dishwash and pot wash stations. It combines a spring-action gooseneck rinse arm with a ceramic cartridge mixer tap in one unit, fed from a single hot and cold water supply. The ceramic cartridge controls water temperature and flow and is chosen specifically because it resists the drip and leak issues that cheaper washer-based valves develop under frequent daily use.

In a working kitchen, a pre-rinse station takes considerable punishment — constant cycling through a service period, exposure to food debris, grease, and regular cleaning chemicals. The gooseneck arm returns to rest position automatically, which keeps the station tidy during busy service and reduces the chance of the spray head sitting in standing water on the sink deck. The ceramic cartridge holds up well under this kind of repeated use without the gradual degradation in control that worn rubber washers produce.

Practical advantages for day-to-day operation include:

• Single water feed simplifies plumbing — one mixer tap rather than two separate inlets
• Ceramic cartridge reduces maintenance calls and dripping taps during service
• Spring-return gooseneck keeps the spray head clear of the sink bowl between uses
• Compact monobloc body suits tighter sink deck installations
• Robust build tolerates the pace of a high-turnover dishwash area

Installation requires a standard hot and cold supply fed to a single monobloc body. The unit is suited to countertop or sink-deck mounting and is a practical fit for most commercial sink configurations. It is worth confirming your existing water pressure is appropriate for pre-rinse use before installation, as very low pressure can affect spray performance.

This unit is well suited to small to medium-sized operations — cafés, pub kitchens, school or care catering facilities, and similar — where a reliable, low-maintenance pre-rinse tap is needed without the complexity of a wall-mounted dual-feed system. Busier high-volume operations processing large numbers of covers continuously may want to consider a heavier-duty wall-mounted pre-rinse set with greater hose reach and flow capacity.

If you are fitting out a dishwash station from scratch or replacing an existing pre-rinse unit and want to make sure this is the right specification for your setup, we are happy to talk it through.

The Dormont wall mounted wash down reel is a heavy-duty retractable hose reel designed for daily cleaning duties in commercial kitchens, food production areas, and similar washdown environments. It houses a 15-metre hose on a spring-loaded retraction mechanism, keeping the hose off the floor and out of the way when not in use.

In a working kitchen, a hose that trails across the floor is a slip hazard and a hygiene problem. The spring-loaded latch on this reel ensures the hose retracts fully after use, stowing neatly against the wall. The declutching arbour is a practical detail worth noting — it protects the return spring from damage if the hose is wound back the wrong way, which extends the working life of the mechanism considerably in environments where multiple staff members use the equipment.

The full-flow shaft and swivel design maintains water pressure throughout the hose length, so there is no noticeable pressure drop at the gun even when the hose is fully extended. The adjustable gun gives operators control over flow and direction for different cleaning tasks.

• Retractable 15m hose keeps floors clear and reduces trip hazards
• Full-flow swivel maintains pressure at full extension
• Declutching arbour protects spring from reverse-winding damage
• Spring-loaded latch ensures reliable, full hose retraction
• Wall-mounted installation keeps the unit clear of floor traffic

Wall mounting position should be chosen carefully — the unit needs to be accessible to the full cleaning area its hose must reach, and the wall fixing must be suitable for the surface type. At just over 2kg, the reel itself is light, but it should be fixed to a sound surface capable of taking the additional load of a full hose under tension.

This reel is well suited to mid-sized commercial kitchens, food prep areas, and utility rooms where a reliable, self-stowing washdown solution is needed. Sites with larger floor areas or very high-frequency cleaning demands may benefit from considering a longer-reach or more heavy-duty option.

If you are unsure whether the reach or mounting position will work for your specific layout, we are happy to talk it through before you order.

The Dormont Aquajet is a wall-mounted pre-rinse spray unit designed for heavy use in commercial pot wash and warewashing areas. It consists of a single water feed assembly with a heavy-duty angled hose, spray gun, and built-in restraining wire. The unit supplies water through a large bore hose, which supports a strong, consistent spray pattern suitable for shifting food residue quickly from pots, pans, and service ware before they enter the dishwasher.

In a busy kitchen, a pre-rinse unit takes a considerable amount of punishment. The Aquajet is built to withstand that day-to-day pressure. The restraining wire is a practical detail worth noting — it limits how far the hose can be pulled, which reduces wear on the connection points and keeps the gun away from standing water in the sink, helping to maintain hygiene standards over time. When fitted with an appropriate mixing valve, it is also suitable for use with a mixed hot and cold water supply, which is a common requirement in most commercial installations.

Key operational advantages include:

• Large bore hose delivers strong spray coverage for effective pre-rinsing
• Integral restraining wire reduces hose wear and limits overstretching
• Gun hook included for safe, hygienic storage between uses
• Meets WRc backflow prevention requirements for UK installations
• Easy to strip down for routine cleaning and servicing

Installation is straightforward for a qualified plumber. The unit requires a wall mounting point and a water supply connection; a mixing valve is needed separately if a blended water feed is required. The compact footprint means it fits within a standard pot wash bay without impeding workflow, though it is worth confirming the wall fixing position suits your sink configuration before installation.

This unit is well suited to cafés, pub kitchens, school canteens, and smaller restaurant operations where a reliable, easy-to-maintain pre-rinse station is needed. For larger sites running continuous dishwasher cycles with very high throughput, a higher-capacity pre-rinse arrangement may be worth considering. If you are unsure which specification best fits your setup, the team is happy to talk it through before you order.

The Mechline AquaJet AJPR40-ST-BF2-S is a panel-mounted pre-rinse spray unit designed for commercial sink stations. It combines a standard spray gun with a 300mm bowl filler on a twin pedestal, fed by twin half-inch female water connections. WRAS approval confirms the unit meets UK water regulations, which is a mandatory requirement for any commercial food service installation.

Pre-rinse units like this are a practical fixture in warewashing areas. Kitchen staff can rinse plates, pans, and gastronorm containers quickly before they go through a dishwasher or glasswasher, keeping throughput moving during busy service. The lever controls allow one-handed operation without interrupting workflow, and the twin-feed configuration helps maintain consistent pressure at the spray head. Having the bowl filler integrated into the same unit removes the need for a separate tap, which keeps the sink station tidier and frees up deck space.

• WRAS approved for compliant installation across UK commercial premises
• Lever-operated spray gun allows quick, one-handed rinsing during service
• 300mm bowl filler integrated alongside the spray gun on one unit
• Twin pedestal panel-mount suits most standard commercial sink configurations
• Twin half-inch female connections keep plumbing straightforward

Installation is panel-mounted directly onto the sink deck or work surface. You will need twin hot and cold supplies with half-inch female connections already in place. It is also worth checking your incoming water pressure before fitting — low-pressure supplies can limit spray gun performance, which is a common issue worth confirming with your plumber at the planning stage.

This unit is well suited to small and medium commercial kitchen sink stations, café and pub kitchens, staff canteens, and similar environments where a combined spray and fill function adds practical value. For higher-throughput warewashing areas with more intensive daily demands, a heavier-duty configuration may be a better long-term choice.

If you would like to talk through whether this unit suits your sink setup or water supply before going ahead, the team is happy to help.