Crown Verity

The Crown Verity MCB30 is a commercial-grade gas barbecue designed for professional food service use in outdoor and event catering environments. Built throughout in stainless steel and operated across four independently controlled burners, it is engineered for regular, sustained use rather than occasional domestic cooking. It is available in LPG or natural gas configuration depending on site requirements.

In a working catering environment, the MCB30 handles continuous service periods reliably. The four-burner layout makes zone cooking straightforward — finished product can be held on one side of the grill while fresh batches cook on the other, keeping throughput steady without interrupting service flow. Crown Verity equipment is well established in event catering, outdoor hospitality, and venues where a fixed indoor kitchen is not the primary production point.

The practical operational advantages of this unit include:

• Independent burner control for flexible zone management across the full grill surface
• Stainless steel construction throughout, resisting the wear and exposure of outdoor catering conditions
• Substantial grill area suited to volume production of burgers and grilled items during service
• Gas-fired operation with no dependency on an electrical supply at the cooking surface
• Compatibility with a wide range of Crown Verity accessories for extended on-site functionality

As an outdoor gas appliance, the MCB30 requires a suitable, properly regulated gas supply and must not be operated in enclosed or semi-enclosed spaces without a proper ventilation assessment. Operators should ensure a stable, level surface and consider appropriate weather protection at outdoor events. The unit is intended for professional operation by staff with working knowledge of commercial gas appliance safety.

The MCB30 is a sensible choice for smaller event catering operations, outdoor hospitality venues, and mobile or temporary setups where a reliable, manageable grill is needed without the footprint of a larger unit. For operations running sustained high-volume back-to-back service, a larger-capacity model within the Crown Verity range may be worth considering.

If you would like to talk through whether this model suits your service volumes and site setup, the team is glad to help before you make a decision.

The Crown Verity MCB36 is a five-burner commercial gas barbecue built for professional food service use. Constructed throughout in stainless steel, it is designed to handle the sustained throughput demands of a working catering environment rather than occasional domestic or event use. It functions as a reliable outdoor cooking station capable of running consistently across a full service period without the compromises typical of lighter-duty equipment.

In a busy service setting, the MCB36 produces a substantial output of grilled product per hour. It suits operations where outdoor grilling is central to the menu offer, or where a secondary cooking station is needed to supplement the main kitchen line during peak periods. The independently controlled burners allow the cooking surface to be zoned for different products simultaneously, which is a practical advantage when managing mixed covers or varying cook times across a single service.

From an operational standpoint, the key advantages are consistency, straightforward heat management, and durability under daily use. Practical benefits include:

• Five independently controlled burners for flexible heat zoning across the grill surface
• Full stainless steel construction for durability and ease of cleaning between services
• Sustained output capacity suited to continuous commercial service periods
• Compatible with a broad accessories range to extend functionality where needed
• Built for commercial use rather than domestic or occasional event catering

As a gas appliance, the MCB36 requires a suitable LPG or natural gas supply depending on configuration, and must be connected by a Gas Safe registered engineer. It is intended for outdoor or well-ventilated covered use. Operators should confirm the correct gas supply type before ordering and ensure the installation location meets any local authority or venue requirements for outdoor cooking.

The MCB36 is well suited to pub gardens, hotel outdoor dining areas, smaller restaurants running seasonal outdoor service, and catering event operations that need a commercial-grade grill without the footprint of a larger banquet unit. For higher-volume sites or operations running extended outdoor service periods throughout the year, a heavier-duty or larger-format model may be worth considering.

If you want to talk through whether this model suits your planned service volume or gas setup, the team is happy to help before you place an order.

The Crown Verity MCB48 is a heavy-duty commercial gas barbecue designed for sustained, high-volume outdoor cooking. Built in stainless steel with a six-burner configuration and a generous grilling surface, it is intended for operators who need to cook continuously at volume rather than occasionally at leisure. It is a workhorse unit, not a domestic appliance dressed up in commercial language.

In a busy service environment, the six-burner layout allows operators to run distinct heat zones simultaneously — a practical advantage when grilling a mixed menu or managing different cook times across a continuous service. Recovery between batches remains consistent under load, which is important when throughput cannot be allowed to slow. The wide grill area means multiple items can be cooked side by side without crowding, helping to keep pace during peak demand.

From an operational standpoint, the MCB48 offers several practical advantages:

• Multi-zone heat control supports mixed menus without causing service delays
• Stainless steel construction is durable, hygienic, and straightforward to clean between services
• High output capacity suits events catering, club functions, and barbecue hire fleet operations
• A broad accessories range allows the unit to be configured for different service styles
• Robust build quality reduces maintenance demands across a full working season

This is an LPG-powered unit intended for outdoor use. A reliable gas supply and correct connections are required before service begins. The unit should not be operated in enclosed or poorly ventilated spaces. Its size and weight mean that access, positioning, and surface stability at each venue should be considered in advance — particularly for hire operators moving the unit between sites. On-site assembly on a level, stable surface is a practical prerequisite.

The MCB48 is well suited to professional event caterers, golf and sports clubs, and hire companies that need a proven, repeatable performer across busy service periods. It sits in the mid-to-upper range of commercial barbecue capacity. Operators running very large-scale events or multiple concurrent service points may find that a higher-capacity setup or a multi-unit arrangement better meets their throughput requirements.

If you are working out whether this unit is the right fit for your service volumes or event format, we are glad to talk it through before you make a decision.

The Crown Verity MCB60 is a large-format commercial gas barbecue built for sustained, high-volume outdoor cooking. It is not a scaled-up domestic grill — it is designed from the outset for professional catering environments where the unit will be running continuously across long service periods, often under demanding conditions.

In practice, the MCB60 handles the kind of throughput that would overwhelm lighter equipment. The combination of multiple independently controllable burners and a generous cooking surface means operators can maintain different heat zones across the grill simultaneously — useful when a menu requires different proteins or items cooked at varying intensities during a busy service. The stainless steel construction holds up well in outdoor and exposed environments, where cheaper units tend to deteriorate quickly through repeated heating cycles, weather exposure, and heavy-handed cleaning routines.

From an operational standpoint, the key practical advantages at this scale include:

• Large cooking surface capable of running multiple menu items at once
• Eight independently controlled burners for precise zoned heat management
• Stainless steel build that cleans down quickly between service periods
• Consistent heat distribution across the full grill surface, reducing constant food repositioning
• Broad accessory compatibility to adapt the unit to different service formats

This is a gas-fed unit, so the appropriate supply — natural gas or LPG depending on the configuration ordered — must be confirmed and in place before the unit arrives. As a large piece of equipment, access routes, surface stability, and proximity to the service area all need consideration during planning. It is intended for outdoor or adequately ventilated semi-outdoor use only.

The MCB60 is well suited to hotel garden dining, golf club hospitality events, large-scale event catering, and similar venues where consistent output across long service periods is the priority. Smaller or more occasional operations may find the capacity exceeds their genuine requirement, and a lower-output model would serve them better. For very high-volume festival or contract catering work, it is worth discussing whether a step up in output is warranted.

If you are unsure whether this unit is scaled correctly for your operation, our team is glad to work through the specifics with you before you place an order.

The Crown Verity MCB72 is a large-format commercial gas barbecue designed for sustained, high-throughput outdoor cooking. With ten independently controlled burners spread across an expansive grill surface, this is a unit built for continuous service rather than occasional use — the kind of output required at hotels, country clubs, outdoor events venues, stadiums, and similar operations where volume is consistent and downtime is not acceptable.

In practice, the scale of the grill surface is one of its most useful operational qualities. It allows different proteins or cook stages to run simultaneously across separate heat zones, which reduces bottlenecks during busy service windows. Individual burner controls mean you can run sections at full capacity when covers are high and scale back during quieter periods without taking the whole grill offline — a straightforward way to manage fuel use without compromising readiness for the next rush.

From a day-to-day operational standpoint, the key practical advantages are:

• Independent burner zones allow flexible heat management and simultaneous multi-product cooking
• Stainless steel construction holds up to repeated outdoor use and resists corrosion over time
• High output capacity suits volume burger, meat, and vegetable cookery across long service periods
• Wide accessory compatibility allows the unit to be adapted for different menu formats
• Large footprint supports multi-product throughput without the need for additional units at moderate scale

Because this is a large outdoor gas unit, planning is important before purchase. You will need an appropriately rated LPG or natural gas supply with commercial-grade regulators and flexible connections. Siting needs to account for clearance distances from covered structures, prevailing wind direction, and any applicable local authority requirements. The unit is substantial in size and weight, so delivery access and final positioning on site should be confirmed at an early stage.

The MCB72 is best suited to operators where outdoor cooking is a regular, volume-driven part of the offering rather than a seasonal add-on. If your outdoor covers are more modest, a smaller-format model from the Crown Verity range is likely a more proportionate fit. For festival-scale or multi-station setups, it is worth discussing whether additional units or a different configuration would serve you better.

If you are planning a permanent external cooking station or working through the logistics of a seasonal outdoor setup, it is worth talking through the practical requirements before you order — we are happy to help.

The Crown Verity RD30 is a roll dome lid designed specifically to fit the MCB30 and MCB60 barbecue units. It sits over the cooking surface and encloses the heat, converting an open-flame grill into a covered cooking environment — closer in behaviour to an indirect grill or a low-level oven. It requires no modification to the base unit and fits without adaptation, provided you are running one of the two compatible models.

In a live outdoor catering environment, the practical difference is noticeable. Enclosing the cooking surface holds heat more effectively, which evens out temperature across the grill and reduces the recovery time between batches. For operators running continuous service at events, festivals, or large outdoor functions, that consistency makes a real difference to throughput and food quality, particularly when working through a varied menu that includes thicker cuts or items that benefit from indirect heat.

Adding the RD30 to an existing setup brings a number of operational advantages:

• Improved heat retention, which supports more consistent results across the cooking surface
• Faster temperature recovery between service batches
• Ability to roast, smoke, or cook indirectly — not possible on an open grill
• Reduced fuel consumption during extended service periods
• Broader menu flexibility without adding another piece of equipment

It is worth confirming your base unit model before ordering. The RD30 is matched to the MCB30 and MCB60 footprint and is not a universal fit across the wider Crown Verity range.

This lid suits operators who are already running Crown Verity MCB barbecues and want to extend their cooking capability without a significant further investment. If your operation demands a higher-output solution from the outset, it is worth discussing the broader Crown Verity range to find the right combination of units and accessories.

If you would like to talk through whether the RD30 works for your current setup, the team is glad to help you think it through.

The Crown Verity RD36 is a roll dome lid made specifically for use with the Crown Verity MCB36 and MCB72 barbecue units. It sits directly over the cooking surface and rolls back on its mechanism when access is needed, meaning operators can work the grill without removing the lid entirely or setting it aside.

On a busy outdoor grill, heat loss between batches is a practical problem. Without a lid, the cooking surface is exposed to ambient conditions and recovery time increases, which slows throughput during peak service. The RD36 traps heat above the grill, helping food cook more evenly and reducing the wait between covers. For events catering, pub gardens, and festival kitchens running continuous service, that difference is straightforward to notice when things are busy.

The roll-back design is particularly suited to compact outdoor setups where there is no obvious place to rest a loose lid safely. Because it stays attached to the unit, it does not create a burn risk or interrupt service flow when operators are moving quickly.

• Retains heat during service, supporting faster cooking between batches
• Roll-back mechanism keeps the lid attached and clear of the cooking surface
• Compatible with both the MCB36 and MCB72 barbecue models
• Practical in tight outdoor setups with limited space around the unit
• Useful for improving consistency from an existing Crown Verity barbecue

This is an accessory purchase rather than a standalone item, so it is worth confirming your barbecue model before ordering. It is relevant to operators who already own an MCB36 or MCB72 and want more consistent output from the unit they have.

If you want to talk through whether this lid suits your current setup, the team is glad to point you in the right direction.

The Crown Verity RD48 is a roll dome lid designed specifically for use with the MCB48 barbecue. It fits directly over the existing grill surface and creates an enclosed cooking environment, allowing heat to circulate around food rather than radiating upward from below alone.

Adding this lid changes how the MCB48 performs in service. Thicker cuts of meat, poultry, and whole sausages cook more evenly with significantly less risk of the outside charring before the centre is done. In outdoor or event catering settings where throughput matters, that consistency across a full service period makes a practical difference — both to the quality of the food and to the pace at which dishes come off the grill.

• More even cooking results across the full grill surface
• Reduced flare-up risk through better heat containment
• Faster cooking times for thicker items, supporting service pace
• Helps retain heat during brief holding periods between orders
• Roll-back mechanism keeps the lid clear when loading food

As an accessory, fitting is straightforward — no tools or additional connections are required. It is worth noting that this lid is designed exclusively for the MCB48 and will not fit other models in the MCB range. Confirming your unit's model designation before ordering is sensible.

This lid is well suited to operators running the MCB48 in pub gardens, hospitality venues, event catering, or any outdoor service environment where cooking consistency matters. If your output requirements are higher, it may be worth a conversation about whether a larger grill configuration would serve your operation better.

If you would like to talk through compatibility or whether this accessory fits how you currently work, the team is always happy to help.

The Crown Verity RD60 is a roll dome lid made specifically for use with the Crown Verity MCB60 barbecue. Fitted over the cooking surface, it creates an enclosed environment that circulates heat around the food rather than allowing it to escape upward. It is a straightforward accessory with a clear purpose — extending what the MCB60 can do without requiring additional equipment.

On a busy grill, retaining heat makes a noticeable difference to throughput and consistency. Thicker cuts of meat, poultry pieces, and bone-in portions benefit considerably from the indirect, convection-style heat the dome creates. During peak service, when the grill surface is heavily loaded, an open setup can struggle to maintain temperature; the dome helps compensate for that heat loss and keeps cooking times predictable.

For operators running the MCB60 at events, festivals, or in a permanent outdoor hospitality setting, the practical advantages include:

• Indirect and convection-style cooking on a direct-flame grill
• More consistent results on thicker or bone-in cuts with less operator intervention
• Improved temperature retention when the cooking surface is fully loaded
• Broader menu capability without the need for additional cooking equipment
• Purpose-built fit that eliminates heat loss around the edges

One important consideration: the RD60 is designed exclusively for the MCB60 model and will not fit other Crown Verity barbecue sizes. Confirming your exact model before ordering is essential. Fitting requires no tools — the dome rolls and sits directly into place on the barbecue frame.

This lid suits catering operators and outdoor hospitality venues already using the MCB60 who want to handle a wider range of menu items during service. If you would like to talk through whether this works for your current setup, the team is glad to help.

The Crown Verity ABR30 is a purpose-built bun rack designed specifically for use with the MCB30 and MCB60 gas barbecue units. It sits inside the RD30 roll dome, making use of the residual heat generated above the main cooking surface to warm buns, rolls, or bread without exposing them to direct flame or grill contact.

In a busy outdoor service environment — whether that is event catering, outdoor hospitality, or mobile food operations — keeping buns warm and ready throughout service is a small but operationally meaningful detail. A cold or stale bun slows service and affects the finished product. The ABR30 allows operators to run bun warming and main cooking simultaneously from the same unit, without needing a separate holding appliance taking up additional space or power.

Four adjustable height positions give a degree of control over heat exposure, which is practical when service pace varies or when the grill is running at different intensities across a shift.

• Fits inside the RD30 roll dome — no additional counter or table space required
• Four height positions allow heat exposure to be managed during service
• Warms buns without direct flame or grill contact
• Eliminates the need for a separate holding unit at the service point

This is a model-specific accessory and will not fit barbecue units or roll domes outside the MCB30 and MCB60 range. It is worth confirming your existing Crown Verity configuration before ordering.

If you are building out a Crown Verity setup from scratch or want to check compatibility with your current equipment, the team is happy to talk through the right combination of units and accessories.

The ABR36 is a purpose-made bun rack designed specifically for use with Crown Verity MCB36 and MCB72 series gas barbecues. It sits inside the RD36 roll dome, making use of the residual heat generated above the grill to warm or lightly toast buns and bread rolls during service — without the need for separate warming equipment or additional counter space.

In a busy outdoor catering environment, keeping buns warm and ready at the same pace as grill output is a genuine operational challenge. This rack addresses that directly by positioning bread at the correct height above the heat source. Four adjustable height positions allow operators to dial in the level of warmth depending on service pace, ambient temperature, and the type of bread being used.

• Keeps buns warm and ready in line with grill output during service
• Four height positions give control over warming intensity
• Fits inside the RD36 roll dome — no extra footprint at the service point
• Purpose-built fit for MCB36 and MCB72 barbecues ensures stability and safety
• Reduces reliance on separate warming equipment at the service station

It is worth being clear about compatibility: the ABR36 is designed for the MCB36 and MCB72 models only and requires the RD36 roll dome to function as intended. It is not a universal accessory and will not suit other barbecue series or configurations where the dome is absent.

This rack is well suited to operators already running Crown Verity MCB series barbecues who want a simple, integrated warming solution — whether for events catering, pub gardens, or outdoor dining venues with regular high-volume service periods. If you are building out your Crown Verity setup and want to talk through which accessories make sense for your service style, the team is glad to help you put the right kit together.

The Crown Verity ABR48 is a purpose-built bun rack designed to sit inside the RD48 roll dome on the MCB48 gas barbecue. Its function is straightforward: it allows operators to warm and hold buns or bread rolls above the cooking surface, using the retained heat already present in the dome rather than relying on a separate holding unit.

In high-throughput outdoor catering environments — festivals, stadium concessions, event catering, and outdoor hospitality — maintaining service pace depends on having everything ready at the point of plating. Keeping buns warm and accessible alongside whatever is on the grill removes a small but meaningful bottleneck during busy periods. Because the rack sits within the existing dome footprint, it adds no extra equipment to manage and takes up no additional surface space.

The rack offers four adjustable height positions, which gives practical control over warming intensity. This is useful when service volume varies across a shift or when the grill is running at different outputs — operators can moderate the heat the buns receive without any guesswork.

• Fits inside the RD48 roll dome — no additional counter space required
• Four height positions give control over warming intensity
• Keeps buns ready to serve without a separate holding unit
• Genuine Crown Verity accessory, matched specifically to the MCB48

It is important to note that this accessory is designed exclusively for use with the MCB48 and the RD48 roll dome. It is not compatible with other Crown Verity barbecue models, so it is worth confirming your setup before ordering.

If you would like to talk through how this fits into your Crown Verity configuration, our team is happy to help you check compatibility before you commit.

The Crown Verity ABR60 is a purpose-built bun rack designed specifically for use with the MCB60 barbecue. It sits inside the RD60 roll dome, making practical use of the existing hood space to warm or lightly toast buns and bread rolls during service — without requiring a separate piece of equipment at the station.

In a busy outdoor or event catering environment, keeping a bun warmer integrated into the grill unit is a straightforward operational advantage. The rack offers four adjustable height positions, which allows operators to manage the heat level reaching the product — useful when switching between delicate brioche buns and sturdier bread rolls, or when the grill itself is running at varying temperatures through a long service period.

The practical benefits are modest but well-targeted:

• Removes the need for a separate bun warmer or toaster at the station
• Keeps the catering footprint compact during outdoor or event service
• Adjustable positions give control over warming intensity
• Fits within equipment already in use — no additional power source required
• Straightforward to fit and remove for cleaning between services

It is worth confirming before ordering that you have the RD60 roll dome as part of your MCB60 setup, as the ABR60 is designed to work within that specific enclosure. Without the roll dome, the rack has no suitable mounting point.

This accessory is well suited to outdoor event caterers, festival traders, sports venue operators, and mobile catering teams running regular high-volume burger or hot dog service from a Crown Verity MCB60. If you are unsure whether this fits your current configuration, the team are happy to check with you before you place an order.

The BC30 is a purpose-made protective cover designed specifically for the Crown Verity MCB30 mobile barbecue. It is not a universal cover — it is manufactured to fit the MCB30 precisely, ensuring the unit is properly enclosed when not in use rather than left exposed under an ill-fitting alternative that could trap moisture or shift in poor weather.

For operators running outdoor catering, terrace hospitality, or mobile event services, equipment left outside between shifts is exposed to rain, dust, grease residue, and seasonal weather. A well-fitted cover reduces that exposure meaningfully — protecting external surfaces, burner components, and control areas from the kind of gradual deterioration that builds up over a season of outdoor use. It also reduces the cleaning required before each service, as surfaces are less likely to have accumulated debris during storage.

Using the correct manufacturer-matched cover is a straightforward way to protect the working life of the MCB30. Poorly fitting covers can cause condensation to collect underneath, which over time does more harm than leaving the unit uncovered in dry conditions. The BC30 is designed to avoid that.

This cover is suited to any operator using the MCB30 as part of a regular outdoor catering setup — whether that is a pub garden, event caterer, or hospitality venue with seasonal al fresco service. If you are unsure whether this cover is the right fit for your unit, or have questions about accessories for your outdoor setup, the team is glad to help.

The Crown Verity BC36 is a purpose-made protective cover designed to fit the MCB36 commercial barbecue unit. It is a straightforward accessory with a single, practical function: keeping the barbecue protected from weather, dust, and general site exposure when not in service.

For operators running outdoor catering events, seasonal terrace service, or permanent outdoor kitchen setups, leaving a commercial barbecue uncovered between uses accelerates wear on burner components, control valves, and cooking surfaces. Moisture ingress in particular can affect ignition reliability and surface condition over time. A correctly fitted cover reduces that exposure and helps keep the unit in consistent working order across a season.

• Tailored fit for the MCB36 ensures complete coverage without improvisation
• Helps protect burner assemblies and control valves from moisture and debris
• Reduces pre-service cleaning time by limiting dust and contaminant build-up
• Supports the long-term condition of the unit in exposed outdoor environments

It is worth noting that this cover is compatible with the MCB36 only. It is not a universal fit and should not be assumed to suit other Crown Verity models without confirming compatibility first.

This cover is best suited to operators who already own the MCB36 and use it regularly in an outdoor or semi-exposed setting. If you are unsure whether your specific MCB36 configuration is compatible, or if you are sourcing the barbecue and accessories together, the team is glad to help you confirm the right combination before you order.

The BC48 is a purpose-made cover designed specifically for the Crown Verity MCB48 mobile charbroiler. Its function is straightforward: to protect the unit when it is not in service, shielding the burners, cooking surfaces, and frame from dust, moisture, and general weather exposure.

For operators running outdoor catering events, seasonal service periods, or a permanent outdoor cooking station, leaving a commercial barbecue uncovered between uses takes a gradual toll. Debris settles on cooking surfaces, moisture works into components, and the finish deteriorates faster than it needs to. A correctly fitted cover reduces that wear, keeps the unit cleaner going into each service, and cuts down the preparation time before the grill is needed.

• Tailored fit for the MCB48 — no adapting an ill-fitting generic cover
• Shields burners and cooking surfaces from debris and moisture during storage
• Reduces pre-service cleaning time and preparation effort
• Helps maintain the unit's appearance and condition over its working life
• Quick to fit and remove when turnaround between events is tight

It is worth being clear that this cover is model-specific. It is made for the MCB48 and will not fit other Crown Verity units correctly. If you are running a different model in the range, it is worth checking with us before ordering.

If you are putting together a full Crown Verity outdoor setup or simply want to confirm you have the right accessories for your unit, we are happy to talk it through.

The Crown Verity BC60 is a purpose-made cover designed exclusively for the MCB60 mobile barbecue. It is a straightforward protective accessory — its function is to shield the unit from dust, debris, moisture, and general exposure when the barbecue is not in service.

For operators running outdoor catering, event service, or seasonal al fresco covers, leaving a commercial barbecue exposed between uses will accelerate surface deterioration and increase the preparation work needed before the next service. A correctly fitted cover helps keep the unit in better condition, reduces pre-service cleaning time, and contributes to a longer working life for the barbecue itself.

Practical considerations for this accessory are straightforward. The BC60 is made to fit the MCB60 specifically and is not a universal cover — it should not be used as a substitute fit on other Crown Verity models. If the barbecue is used on busy outdoor sites or moved between locations, it is worth considering where the cover will be stored when the unit is in operation, particularly where loose items on site could become a hazard.

This cover is a sensible addition for any operator running an MCB60 as part of an outdoor or mobile catering setup, and becomes more important the more frequently the unit is stored outdoors or transported between sites.

If you are unsure whether this cover is compatible with your Crown Verity model, or if you are putting together a wider outdoor catering setup and want a steer on what you need, we are happy to help.

The Crown Verity BC72 is a purpose-made protective cover designed to fit the MCB72 mobile barbecue. It is a straightforward accessory with a clear function — keeping the unit protected when it is not in use.

Outdoor catering equipment is exposed to more wear between services than most operators account for. Dust, airborne debris, and damp conditions can gradually affect burner components, cooking surfaces, and stainless steel bodywork if left uncovered. For operators who run the MCB72 seasonally or move it between sites and events, a reliable cover helps maintain the unit in good working order across a longer service life.

Using a manufacturer-matched cover rather than a generic alternative is worth considering. A correctly fitted cover sits flush against the unit, which reduces the risk of moisture pooling or becoming trapped against surfaces — a common cause of surface corrosion on stainless steel equipment over time.

This cover is designed specifically for the MCB72 model and is not a universal fit. It should not be assumed compatible with other Crown Verity barbecue sizes without confirming first.

If you are looking after a Crown Verity MCB72 and want to make sure you have the right accessories to keep it in good condition, the team is happy to point you in the right direction.

The Crown Verity RFS30 is a removable front shelf designed specifically for the MCB30 series barbecue. It attaches to the front of the unit, providing an additional working surface at grill height — a straightforward addition that makes a practical difference when running food through an outdoor service station.

In live outdoor catering, keeping everything within arm's reach matters. A dedicated shelf at grill level gives operators somewhere to rest sauces, serving dishes, plated food, or utensils without stepping away from the cooking area. That small improvement in organisation keeps service moving, particularly during peak periods when the pace at the grill doesn't allow for unnecessary movement.

• Attaches directly to the MCB30 using manufacturer-matched fixing points for a secure fit
• Removable design simplifies transport and storage between events
• Adds usable workspace at grill height without extending the unit's footprint significantly
• Built as a Crown Verity accessory, so dimensions and fit are consistent with the host unit

Because the RFS30 is a manufacturer accessory rather than a generic aftermarket shelf, it is built to align with the MCB30's attachment points and proportions. If your MCB30 is an older unit, it is worth confirming compatibility before ordering, as Crown Verity have updated the range over time.

This shelf suits operators who already run the MCB30 regularly — whether at events, outdoor functions, or as part of a fixed outdoor station — and want to improve workflow at the grill without a significant investment. It is a practical, minor addition rather than a fundamental upgrade.

If you are working out how to complete your MCB30 setup or want to check compatibility with your specific unit, the team is happy to help you work through it.

The Crown Verity RFS36 is a removable front shelf designed specifically for use with the MCB36 barbecue. It attaches directly to the front of the unit, extending the usable surface area immediately around the cooking zone without requiring a separate prep table alongside.

In outdoor catering and event service, the space around a grill tends to fill up quickly. Having a dedicated shelf at the front of the MCB36 keeps essentials — tongs, condiments, resting items, ready-to-plate food — within arm's reach and off the ground. When service is over, it removes cleanly, which matters when the unit needs to be packed down, transported, or stored compactly between events.

A few practical points worth noting: the RFS36 is purpose-built for the MCB36 and is not compatible with other models in the Crown Verity range. If you are running a different unit, confirm the correct shelf reference before ordering. Fitting is straightforward and does not require any separate installation work beyond attaching it to the barbecue itself.

This shelf is best suited to operators who use the MCB36 regularly for event catering, outdoor hospitality, or high-volume barbecue service and want to work more efficiently in the space around the grill. If you are putting together a broader outdoor station setup and want to talk through what accessories work well together, we are happy to help you get it right.

The Crown Verity RFS48 is a removable front shelf designed specifically for the MCB48 barbecue unit. It clips directly onto the front of the grill to provide an additional working surface within arm's reach of the cook, without the need for a separate side table or additional furniture around the station.

In a busy outdoor catering setting — whether that is an events kitchen, a festival operation, or a hotel with outdoor dining — keeping tools, platters, and condiments close to the grill reduces unnecessary movement and helps service run more smoothly. The shelf keeps the workflow tight around the unit itself, which matters when space is limited or the grill is positioned away from a fixed prep area.

Being fully removable, it is straightforward to detach when the MCB48 needs to be transported between events or stored away. It adds no meaningful complexity to the setup or breakdown process, which is a practical consideration for mobile operators.

• Clips securely onto the MCB48 without tools
• Provides a dedicated staging surface directly at the grill
• Removes quickly for transport and storage
• Keeps condiments, tools, and platters within easy reach
• Reduces reliance on separate side furniture at the grill station

This shelf is compatible with the MCB48 specifically — if you are running a different Crown Verity unit or are unsure about compatibility with your current configuration, it is worth checking before ordering. If you have questions about accessorising your outdoor cooking setup more broadly, we are happy to talk it through.

The Crown Verity RFS60 is a removable front shelf designed specifically to fit the MCB60 series barbecue. It attaches directly to the front of the unit, giving operators a dedicated surface for resting platters, holding condiments, or staging plated food during service — without requiring a separate table alongside the grill.

In a busy outdoor catering or events environment, having the right surfaces exactly where they are needed matters. Rather than reaching back to a separate prep area while managing a full grill load, operators can keep what they need within arm's reach. It is a modest addition, but one that tends to make a practical difference to workflow pace during peak service periods.

The shelf detaches cleanly, which makes post-service breakdown and cleaning straightforward. For mobile caterers and event operators who move equipment regularly, the ability to remove it quickly is a genuine convenience rather than an afterthought.

• Keeps the immediate cook's station organised during service
• Reduces unnecessary movement away from the grill at peak times
• Removable for easy cleaning and transport
• Fits directly to the MCB60 without additional tooling

It is worth noting that this shelf is designed specifically for the MCB60 and is not a universal fit across other Crown Verity models. If you are running a different configuration or are unsure about compatibility with your specific unit, it is worth checking before ordering.

If you would like to talk through which accessories are right for your setup, the team is happy to help.

The Crown Verity RFS72 is a removable front shelf made specifically for the MCB72 commercial barbecue. It attaches directly to the unit and gives the operator a usable surface immediately in front of the cooking area — useful for staging plated food, keeping sauces and seasonings to hand, or resting items briefly during service without having to reach across to a separate table.

In a busy outdoor or event catering setup, working space around the grill is often limited. Having a fixed staging point at the front of the unit helps keep service organised and reduces the small but disruptive interruptions that come from a cluttered or underprepared workstation. It is a modest addition, but one that makes the grill a more complete working station rather than an isolated cooking surface.

Because it is removable, it can be taken off for transport, storage, or where space around the unit is restricted. It is designed to fit the MCB72 specifically, so there is no guesswork around compatibility when it is ordered alongside that model.

• Adds a staging surface directly at the front of the MCB72
• Removable for easy transport and compact storage
• Keeps condiments, plates and utensils within reach during service
• Designed to fit the MCB72 without adaptation
• Supports a more organised workstation in outdoor or event settings

This shelf suits event caterers, outdoor hospitality operators, and any team running the MCB72 as a primary service unit who want to make better use of the space immediately around the grill. If you are putting together a full Crown Verity setup and want to talk through which accessories will work best for your service style, we are happy to help.

The Crown Verity RES is a removable end shelf designed specifically for use with the MCB range of Crown Verity commercial barbecues. It fixes directly to the end of the grill unit, giving operators a dedicated surface immediately adjacent to the cooking area — useful for resting cooked food, plating, or keeping utensils and condiments to hand without needing a separate table or side unit.

In outdoor catering and events environments, having usable workspace right at the grill makes a real difference during service. Operators can keep the main cooking surface clear, move food efficiently from grill to service without stepping away, and maintain a tidier, more controlled setup throughout a busy period. When the shelf is not required — during transport, at the end of an event, or in storage — it removes cleanly, which is a practical advantage for mobile caterers and venues where the barbecue is regularly relocated.

• Attaches directly to the MCB barbecue, adding staging space at the grill
• Removable design makes transport and compact storage straightforward
• Keeps the main cooking surface clear during peak service
• Reduces reliance on separate tables or side furniture at outdoor events
• Compatible across the Crown Verity MCB barbecue range

It is worth noting that this shelf is designed specifically for the MCB series and is not a universal fit for other Crown Verity models. If you are planning a broader outdoor catering setup and want to make sure you are selecting the right MCB model and accessories to match your service operation, we are glad to help you work through the options.

The Crown Verity G1222 is a 300mm drop-on griddle plate designed specifically for use with Crown Verity MCB series barbecues. It sits directly over the existing grate and heat source, converting a portion of the cooking surface into a flat griddle zone without any additional connections, installation work, or separate equipment.

In outdoor catering and events environments, having both a grilled surface and a flat griddle available on the same unit is a practical advantage. The plate absorbs and distributes heat from the burners beneath, providing a consistent flat cooking surface suited to eggs, bacon, pancakes, and other foods that don't perform well on an open grate. For operators running breakfast services or varied menus at outdoor events, this avoids the need to bring a separate piece of kit to site.

• Adds flat griddle capability to an existing MCB series barbecue
• No connections or installation required — drops into place over the grate
• Suitable for foods unsuitable for open grilling, including eggs and bacon
• Removable between services for cleaning and storage
• Expands menu options without additional equipment investment

It is worth confirming compatibility with your specific MCB model before ordering, as this plate is designed for the MCB series and may not suit other barbecue formats. For operations requiring extensive flat-top cooking over long service periods, a dedicated griddle unit would provide greater surface area and more precise temperature management across multiple zones.

This accessory is well suited to operators who already run Crown Verity MCB barbecues and want to broaden their cooking capability at outdoor events, hospitality venues, or temporary catering setups. If you'd like to talk through whether it fits your current configuration, the team is glad to help you work it out.

The Crown Verity G2022 is a 533mm drop-on griddle plate designed specifically for use with Crown Verity MCB barbecues. It sits directly over the existing grill grates, converting the open-flame cooking surface into a flat-top griddle without any permanent modification or additional connections. It draws heat from the barbecue burners beneath it, giving operators a straightforward way to expand what a single unit can produce during service.

In practice, this kind of accessory earns its place at outdoor catering stations, hospitality events, and festival or street food setups where the same barbecue needs to handle both grilled and griddle-cooked items across a busy shift. Switching between surfaces without changing equipment keeps the operation practical and the footprint compact — useful when space or logistics are a constraint.

The main operational advantages this plate adds to an existing MCB unit:

• Flat cooking surface for eggs, bacon, pancakes, and similar items
• Drop-on fit — no tools, no permanent modification, no extra connections
• Consistent heat transfer direct from the barbecue burners below
• Extends menu range without requiring a separate piece of equipment
• Easy to lift off and clean between service periods

Compatibility is confirmed for Crown Verity MCB barbecues only — it should not be assumed to fit other brands or models. As with any outdoor cooking setup, the host barbecue should be on a stable, level surface before the plate is placed into service. The plate itself adds no gas or electrical requirement beyond what the barbecue already demands.

This plate suits caterers, hospitality venues, and event operators who already run Crown Verity MCB barbecues and want to add griddle capability without the cost or footprint of a dedicated unit. For sites running consistently high volumes of flat-top cooking, a standalone griddle may prove a more practical long-term investment.

If you'd like to talk through how this fits into your current outdoor cooking setup, our team is glad to help you think it through.

The Crown Verity PGRID30 is a 750mm removable griddle plate designed exclusively for use with the Crown Verity MCB30 and MCB60 barbecue units. It fits directly onto the barbecue via a slide-on mounting system and converts the open grill into a flat-top cooking surface without tools or any meaningful downtime between the switch.

In outdoor catering and event environments, having flat-top capability alongside a grill matters more than it might seem at first. A wide range of menu items — eggs, bacon, onions, smash burgers, pancakes — simply cannot be prepared on an open grill without loss of product or poor results. The PGRID30 handles these reliably, and the thick rolled steel construction holds heat across the surface well during continuous service, which helps maintain consistent output when throughput is high and recovery time is limited.

• Slide-on fitment allows fast changeover between griddle and grill cooking
• Removable grease tray simplifies cleaning between service periods
• Integrated splashguard helps contain grease and reduces hazard during service
• Heavy rolled steel construction retains heat evenly under sustained use

The PGRID30 is designed to fit the MCB30 and MCB60 only — it will not fit other Crown Verity models or third-party barbecues, so it is worth confirming your unit before ordering. Like any rolled steel griddle surface, it will benefit from proper seasoning and consistent aftercare to maintain cooking performance and surface condition over time.

This accessory is well suited to outdoor caterers, festival and event operators, and hospitality venues running MCB-series Crown Verity barbecues who need occasional or regular flat-top cooking capability without investing in a separate dedicated unit. For operations where flat-top cooking is the primary output at high volume, a standalone griddle may be a more practical solution.

If you would like to talk through whether this fits your current setup or how it works alongside your existing MCB unit, the team is glad to help you work it out before you order.

The Crown Verity PGRID36 is a heavy-duty rolled steel griddle plate designed to fit the Crown Verity MCB36 and MCB72 outdoor gas barbecues. It replaces the standard grill grates with a flat cooking surface, opening up a wider range of menu options — eggs, smashed burgers, pancakes, thin cuts, and finely diced ingredients — that would not be practical on an open-bar grill. The slide-on fitting requires no tools, so the changeover between grill and griddle cooking can be done quickly during service without disrupting the operation.

In busy outdoor catering environments, heat consistency across the cooking surface is important. The thick rolled steel construction holds and distributes heat evenly, helping to reduce hot spots and maintain stable temperatures during sustained service runs. For operators working long outdoor events where the barbecue is running continuously, this even heat retention makes a practical difference to output and consistency. The included splashguard helps contain grease and residue during cooking, and the removable grease tray makes end-of-service cleaning more manageable.

• Slide-on, tool-free fitting for fast changeover between griddle and grill surfaces
• Thick rolled steel plate for even heat distribution under sustained use
• Splashguard helps contain cooking residue during service
• Removable grease tray simplifies cleaning at end of service
• Compatible with both MCB36 and MCB72 barbecue models

It is worth noting that the PGRID36 is only compatible with the MCB36 and MCB72 — it is not a universal fitting across the Crown Verity range. If you are running a different Crown Verity model, confirming compatibility before ordering is advisable. Operators who need a dedicated flat griddle surface running full-time at high volume may also want to consider whether a standalone commercial flat-top better suits their output requirements.

This plate is well suited to mobile caterers, outdoor event operators, and hospitality venues already running Crown Verity MCB barbecues who want the flexibility to add griddle cooking without investing in a separate unit. It is a practical accessory rather than a standalone piece of kit, and its real value lies in the versatility it adds to an existing setup.

If you are unsure whether the PGRID36 suits your current barbecue model or service setup, feel free to have a conversation with the team before ordering.

The Crown Verity PGRID48 is a full-width griddle plate designed specifically for the MCB48 barbecue unit. It slides directly into the cooking position in place of the standard grill grates, converting the MCB48 into a flat-top cooking surface without any tools or permanent modification. It is a dedicated accessory, not a universal fit, so it is worth confirming you have the MCB48 before ordering.

The plate is constructed from thick rolled steel, which gives it the mass to hold temperature consistently across the full surface when food is loaded. In a busy outdoor service environment — events catering, festival operations, large hospitality functions — this matters. A thinner plate would shed heat quickly under volume; the PGRID48 maintains cooking temperature through continuous service in a way that keeps throughput steady rather than forcing the operator to work in smaller batches.

Practical features that make a difference in service include:

• Slide-on fitment allowing quick conversion between griddle and open grill cooking
• Thick rolled steel construction for consistent heat retention under load
• Removable grease tray for faster cleaning between service periods
• Integrated splashguard to reduce mess and protect the operator
• Designed exclusively for the MCB48, ensuring a secure, stable fit

As a removable accessory, it gives operators the flexibility to switch between grill and griddle cooking depending on the menu — a useful characteristic when outdoor event menus vary from one day to the next. Cleaning is straightforward given the removable grease management, which matters when turnaround between services is tight.

If you are unsure whether the PGRID48 suits your current MCB48 setup, or want to talk through outdoor cooking accessories more broadly, the team is glad to help you work through it.

The Crown Verity RT30 is a rotisserie attachment designed specifically for the MCB30 and MCB60 barbecue units within the Crown Verity range. It fits directly onto compatible units without modification or fabrication, converting an existing grill into a rotisserie cooking station and broadening the menu options available from a single piece of equipment.

Rotisserie cooking is well suited to volume service — whole birds, rolled joints, and large cuts cook consistently with minimal manual intervention, which matters during sustained outdoor service periods where staff attention is spread across multiple stations. The RT30 is relevant wherever operators need reliable, repeatable results on larger protein loads without running a separate dedicated unit.

From a practical standpoint, the key advantages for outdoor catering operations are straightforward:

• Fits directly to MCB30 and MCB60 units — no tools or fabrication required
• Suitable for whole birds and large joints in continuous service
• Supplied with forks to secure product securely during rotation
• Extends an existing barbecue's capability without additional equipment footprint
• Compact accessory format — easy to transport alongside the main unit

It is worth being clear about compatibility: the RT30 is designed exclusively for the MCB30 and MCB60 and will not fit other Crown Verity models or third-party barbecue units. If you are unsure which barbecue you are running, it is worth confirming the model before ordering to avoid a mismatch.

This is an accessory purchase that only makes sense alongside the right host unit. If you are building out a Crown Verity setup or want to talk through how the RT30 fits into your service model, we are happy to help — give us a call or send a message.