Dishwasher & Glasswasher Baskets

The Cambro 20C414151 is a full-size dishwasher cup rack designed to hold up to 20 cups or coffee mugs per wash cycle. It is a straightforward, practical piece of warewash kit — the kind of rack that quietly does its job without requiring much thought once it is in use.

The defining feature of this rack is its built-in tilt design, which angles cups and mugs so that water drains completely from the base during the wash and dry cycle. In a busy kitchen this matters: pooled water sitting in the base of cups slows drying time, creates additional handling at the end of the cycle, and introduces hygiene risk. The tilt function addresses all three of those issues without any extra effort from the operator.

Practically speaking, this rack suits operations where cups and mugs form a meaningful portion of the wash load — cafés, hotels, staff canteens, conference facilities, and pub kitchens with a strong coffee or hot drinks service. The compartment size accommodates cups with handles, which is a detail worth checking against your crockery before ordering.

• Tilt drainage reduces pooling and speeds up drying after each cycle
• 20 compartments per rack supports steady throughput during service
• Supplied in soft grey as standard; other colours available to support colour-coded wash systems
• Compatible with full-size commercial dishwasher baskets

It is worth noting that this rack is sized for cups and standard mugs — it is not designed for tall glasses or large catering mugs. If your operation runs a high volume of mixed glassware and cups through the same machine, it may be worth discussing which rack configurations would give you the most efficient loading pattern.

If you are unsure whether this rack fits your current dishwasher or crockery, the team is happy to help you confirm compatibility before you order.

This is a standard 500 x 500mm tray rack designed for use with commercial dishwashers and glasswashers that accept the common 500mm basket format. It is a straightforward accessory intended to hold trays and similar flatware items during the wash cycle, keeping them secure and allowing water and detergent to circulate effectively.

In a busy kitchen or catering environment, having the right basket format matters more than it might seem. Trays loaded loosely or in the wrong rack type can shift during the cycle, reducing wash coverage and increasing the likelihood of items needing a second pass. A properly sized tray basket helps maintain throughput during service without creating bottlenecks at the warewash station.

Practical benefits include:

• Fits the standard 500mm dishwasher footprint used across most commercial machines
• Keeps trays upright and separated for consistent wash coverage
• Straightforward to load and unload during busy service periods
• Compatible with a wide range of 500mm undercounter and passthrough dishwashers
• Durable construction suited to repeated commercial wash cycles

It is worth noting that colour may vary between supply batches, as this is a non-branded accessory sourced from general stock. This has no bearing on performance or compatibility, but is worth bearing in mind if visual consistency across your basket set matters to you.

This basket is well suited to cafés, staff canteens, contract catering operations, and any site already running a 500mm machine that needs additional or replacement baskets. If you are unsure whether this basket is compatible with your specific machine, or if you need guidance on basket configurations for a new warewash setup, we are happy to help.

The Cambro BR414151 is an open-base warewash rack designed to handle pots, pans, bowls, and larger preparation or service items that don't fit comfortably in a standard compartment rack. It sits at 500mm x 500mm to match the footprint of most commercial dishwashers and glasswashers, and the open construction allows water and detergent to reach items from all angles during the wash cycle.

In a busy kitchen environment, a reliable base rack earns its place through straightforward durability. The open design reduces food trap points and makes post-cycle inspection quick, which matters when warewash turnaround is tight during service. The soft grey Cambro construction is robust enough for daily commercial use without becoming brittle or discolouring noticeably over time.

• Open rack format allows thorough water and chemical penetration around bulky items
• Supplied as standard with one extender, increasing usable internal height where needed
• Consistent 500mm footprint fits standard commercial warewash machines
• Suitable for pots, pans, mixing bowls, colanders, and similar large items
• Straightforward to stack and store when not in use

Installation considerations are minimal — this is a passive accessory that requires no connection to services. It is worth confirming the internal dimensions of your existing dishwasher or glasswasher before ordering to ensure the 500mm rack fits correctly, particularly in older or non-standard machines. The included extender adds height, but very tall items may still require an alternative solution.

This rack suits kitchens that regularly wash large or awkward items and need a dependable solution that holds up to daily use. If your operation runs higher volumes or requires multiple rack configurations simultaneously, it is worth reviewing whether additional base racks or alternative insert types would better serve your workflow.

If you are building out a full rack system or unsure which configuration suits your machine, we are happy to help you work through the options.

This 450mm open warewashing basket is a standard rack designed for use with commercial pass-through and hood-type dishwashers that accept 450mm baskets. The open-wall construction means the sides are largely unobstructed, allowing water and detergent to circulate freely around the load rather than being directed only from above and below.

In a busy kitchen environment, open racks of this type are commonly used for items that benefit from unrestricted spray coverage — irregular-shaped kitchenware, smallwares, and lighter utensils that might otherwise trap water or sit awkwardly in a compartmentalised insert. The open format also makes loading and unloading quick during a heavy service push, with no internal dividers to work around.

Practical advantages of an open-wall basket include:

• Unrestricted water circulation for thorough wash coverage
• Quick to load and unload during busy service periods
• Easy to rinse and keep clean between cycles
• Versatile for a range of smallwares and irregular items
• Lightweight construction keeps handling straightforward

It is worth confirming that your dishwasher accepts 450mm baskets before ordering, as some machines in this size category vary slightly in their rack runners and clearance heights. This basket suits standard 450mm-footprint machines, but checking compatibility with your specific model avoids unnecessary returns.

This rack is well suited to smaller commercial kitchens, cafés, and pub operations running a single 450mm dishwasher. Sites with higher throughput or a need for specialist inserts — such as glass racks or peg racks for crockery — may find it worth looking at the broader range of basket types and inserts available alongside this one.

If you are unsure which basket configuration works best for your machine or your typical wash load, the team is happy to help you work it out before you order.

This is a straightforward plastic cutlery insert designed to sit within a standard dishwasher basket and hold loose cutlery — knives, forks, and spoons — upright during the wash cycle. It is a simple, functional component that most commercial kitchens will already be familiar with.

In a busy service environment, loose cutlery rattling around in a flat basket can lead to poor wash results, with items nesting together and blocking water and detergent from reaching all surfaces. A dedicated insert keeps items separated and positioned correctly, which helps deliver more consistent cleaning and reduces the need for re-washing.

The practical advantages of using a cutlery insert are straightforward:

• Keeps cutlery upright and separated during the wash cycle
• Reduces nesting, which improves wash coverage and results
• Lightweight and easy to transfer between baskets or racks
• Simple to rinse out and keep clean between services
• Grey finish is standard across most warewash basket systems

These inserts fit into the cutlery holder slots found on most commercial dishwasher baskets. It is worth confirming compatibility with your existing basket system before ordering, as basket designs can vary between manufacturers.

This insert is suited to any commercial kitchen running a pass-through or undercounter dishwasher where loose cutlery handling is part of the daily operation — from small cafés through to larger kitchen brigades. If you are equipping a full warewash station and are unsure how many inserts you need, or whether your current baskets are compatible, we are happy to help you work that out.

A cutlery insert is a simple but useful addition to a commercial dishwasher basket, dividing the washing area into separate compartments so that loose cutlery is held upright and separated during the wash cycle. This 8-compartment version sits inside a standard dishwasher basket and is commonly used in cafés, restaurants, pub kitchens, and contract catering operations where high volumes of cutlery pass through the warewasher during a single service.

In practice, keeping cutlery separated during washing improves water and detergent access to each item, which supports cleaner results compared to throwing cutlery loosely into a basket where pieces can nest together and shield one another from spray arms. It also makes unloading more organised, which helps front-of-house teams sort and restock cutlery quickly between covers.

• Separates cutlery during washing to reduce nesting and improve clean results
• Speeds up unloading and sorting after each wash cycle
• Helps maintain a consistent workflow through busy service periods
• Compatible with standard commercial dishwasher baskets
• Straightforward to clean and replace as part of regular warewash maintenance

There are no electrical or plumbing requirements. The insert simply drops into an existing basket. It is worth checking that your current basket dimensions are compatible before ordering, as basket sizes do vary between dishwasher manufacturers and models. Colour may vary depending on stock availability — this does not affect performance or suitability.

This insert is well suited to any commercial kitchen already running a rack or undercounter dishwasher and handling moderate to high cutlery volumes. For operations turning over very large quantities of cutlery in tight windows, it may be worth considering a dedicated cutlery cylinder or a multi-basket system alongside.

If you are unsure whether this insert will fit your existing baskets, or want to discuss your broader warewash setup, the team is happy to help you work through the options.

This is a standard 500 x 500mm plate rack designed for use with commercial pass-through and hood-type dishwashers that accept the common 500mm basket format. It holds plates upright during the wash cycle, allowing water and detergent to circulate effectively around each item and ensuring a thorough, consistent clean.

In a working kitchen environment, plate racks like this are everyday consumables — they take considerable punishment through repeated wash cycles, stacking, and general handling. Having a reliable stock of well-fitting baskets keeps the warewash operation moving without interruption, particularly during busy service periods when turnaround time matters.

Practical advantages of keeping the correct basket format in rotation include:

• Consistent plate presentation through the wash cycle without items toppling
• Compatible with the standard 500mm dishwasher basket format widely used in commercial machines
• Helps maintain throughput by reducing the need to restack or reload poorly supported crockery
• Straightforward to integrate into existing rack systems without adjustment

It is worth noting that colour may vary between batches — this is normal for this type of unbranded rack and does not affect performance or compatibility. These baskets are best suited to operations already running a 500mm-format machine. If your dishwasher takes a different basket size, it is worth confirming the correct format before ordering.

If you are unsure which basket type or quantity suits your operation, the team is happy to help you work that out.

The Cambro Camrack 16-compartment cup rack is a purpose-built warewash rack designed to hold cups, mugs, and similar items securely through a commercial dishwasher or glasswasher cycle. It is supplied in a soft grey finish as standard, with other colours available to support colour-coded rack systems where operators need to separate different ware types through the wash cycle.

What distinguishes this rack from a standard flat-bottom cup rack is its built-in tilt feature. The rack is designed so that cups and mugs sit at a slight angle, allowing water to drain away from the base rather than pooling inside them. In a busy kitchen environment this makes a practical difference — cups come out drier and are ready for service or storage more quickly, without staff needing to invert each one manually after washing.

Key practical points for operators:

• Tilt-drain design reduces standing water inside cup bases after the wash cycle
• 16 compartments per rack gives a reliable throughput for tea, coffee, and hot beverage service
• Suits cups and mugs up to 11cm in diameter including the handle
• Compatible with standard 500mm commercial dishwasher baskets
• Colour-coded options available to support rack management systems

This rack is well suited to cafés, hotel breakfast operations, staff canteens, and any site running a high volume of hot beverage service. For operations handling a larger mix of glassware or needing a different compartment count, alternative rack configurations are available across the Cambro range.

If you are building out a rack system or are unsure which combination of racks suits your dishwasher and service volume, we are happy to talk it through with you.

This is a standard 450mm square wire basket designed to hold plates upright during the wash cycle in a commercial dishwasher. It fits the common 450mm rack format used across a wide range of undercounter and passthrough machines, keeping plates separated and correctly positioned to allow water and detergent to reach all surfaces effectively.

In a busy kitchen environment, having the right basket for the job makes a practical difference. Plates loaded loosely or in the wrong basket type can come out poorly washed, creating re-wash cycles that slow service and increase water and chemical use. A dedicated plate basket supports consistent wash results and keeps the warewash operation moving at pace during peak covers.

This basket is a straightforward consumable item, but it is worth checking compatibility before ordering. Not all 450mm machines use the same rack depth or peg spacing, and basket wear is normal over time in a high-throughput environment. If your existing baskets are warped, rusted, or missing pegs, replacing them promptly keeps your wash quality consistent and avoids unnecessary machine wear from unbalanced loads.

If you are equipping a new dishwasher installation or building up your basket inventory and are unsure how many you need for your service volume, we are happy to help you work that out.

This open warewashing basket is designed to fit standard 500mm commercial dishwashers and glasswashers. The open-sided construction allows water and detergent to circulate freely around the load, making it a practical choice for plates, bowls, trays, and general crockery that doesn't require the lateral support of a divided or peg rack.

In a busy kitchen environment, having a reliable supply of matching baskets in regular rotation is more important than it might seem. A worn or mismatched basket can slow down the wash cycle, cause uneven cleaning results, or damage crockery during handling. This basket offers a straightforward, dependable option for keeping warewash throughput moving during service.

• Open construction promotes good water and detergent coverage across the load
• Standard 500mm footprint fits most commercial dishwasher and glasswasher racks
• Suitable for plates, bowls, and general crockery items
• Lightweight and easy to handle during busy service periods
• Practical replacement or additional basket for existing warewash operations

As with most warewash accessories, it's worth confirming compatibility with your existing machine before ordering — basket dimensions and rim profiles can vary slightly between manufacturers, and a basket that doesn't seat correctly can affect wash performance or cause damage to the machine interior. Note that colour may vary between supply batches.

This basket is well suited to smaller operations needing an additional or replacement rack, or as part of a broader basket stock-up for higher-volume sites. If you're equipping a new warewash station or unsure how many baskets your operation requires, we're happy to talk through what's practical for your service volume and machine setup.

This is a 390mm square wire glasswasher basket designed for use with commercial glasswashing machines. Wire baskets of this format are a standard consumable in bars, pubs, restaurants, and hospitality venues where glasswashers run continuously through a service.

In day-to-day use, these baskets take considerable punishment — loaded, run through cycles repeatedly, stacked when wet, and handled quickly during busy service. A well-made wire basket holds its shape under that routine and keeps glasses supported correctly so they wash cleanly without tipping or nesting against each other.

Practically speaking, having the right number of baskets in rotation matters as much as the machine itself. Running too few means bottlenecks during peak service; having a reliable stock of correctly sized baskets keeps throughput steady.

• Standard 390mm square footprint suits most undercounter glasswashers
• Wire construction allows water and detergent to circulate freely around glassware
• Straightforward to rinse down and stack between services

This basket is suited to bars, pubs, hotels, and any venue running a 400mm-class glasswasher. If your operation runs a larger passthrough or hood machine, a different basket format will likely be required — it is worth confirming compatibility with your machine before ordering multiples.

If you are unsure how many baskets your operation needs, or whether this size is correct for your glasswasher, the team is happy to help you work that out.

This grid is a replacement or additional insert designed to sit within a standard 460 x 460mm commercial dishwasher or glasswasher basket. It divides the basket interior to help keep items separated and upright during the wash cycle, reducing the risk of items shifting, nesting together, or coming out poorly washed.

In a busy warewash area, basket inserts like this are often overlooked until they crack or go missing — at which point throughput slows and breakages increase. Having the correct grid in place means items are held consistently in position, wash water circulates more effectively around each piece, and the overall wash result is more reliable during back-to-back cycles under service pressure.

Practical benefits include:

• Keeps items separated to prevent nesting and uneven wash coverage
• Reduces movement during the cycle, lowering the risk of breakages
• Compatible with standard 460 x 460mm basket formats used across many commercial machines
• Straightforward to swap out when worn or damaged
• Helps maintain consistent wash results across high-turnover services

It is worth checking the basket dimensions and internal configuration of your existing baskets before ordering, as grid designs can vary between manufacturers even within the same nominal basket size. If you are unsure whether this insert is compatible with your current baskets or machine, it is worth getting in touch before placing an order.

This insert suits kitchens running a standard under-counter or pass-through dishwasher with 460mm baskets. If your operation uses a different basket format or you need inserts in larger volumes, the range includes options to suit varying requirements.

If you would like to confirm compatibility with your existing warewash setup, our team is happy to help you work through it.

The Cambro OETR314151 Camrack is a dishwasher tray rack designed specifically to handle catering trays of varying lengths. Unlike standard closed-end racks, this unit is open on one end, which means trays can slide through rather than needing to fit within a fixed internal boundary. Each rack holds nine trays in a single pass, keeping turnaround organised and consistent during busy service periods.

In a working kitchen, tray throughput during meal service can quickly become a bottleneck. This rack helps operators keep trays cycling through the dishwasher efficiently without the handling difficulties that come from forcing oversized trays into closed racks. The soft grey finish is practical for a warewash environment and the open-end design reduces the fuss of loading and unloading under pressure.

A few practical points worth noting before purchasing:

• Open-ended design accommodates trays of varying lengths without forcing or repositioning
• Holds nine trays per rack, supporting consistent batch washing
• Supplied as standard in soft grey
• Extenders cannot be added to this rack
• Requires a dishwasher with an extra-deep wash chamber — not suitable for standard-depth machines

The chamber depth requirement is the most important consideration here. This rack will not sit or wash correctly in a machine without the additional internal clearance, so it is worth confirming your machine's wash chamber dimensions before ordering. It is not a universal fit across all commercial dishwashers.

This rack is well suited to staff restaurants, school canteens, healthcare facilities, and other operations running high volumes of catering trays through a compatible deep-chamber machine. If you are unsure whether your dishwasher is suitable, or if you need advice on rack configurations for your volume of service, the team is happy to help you work through it before you order.

The Cambro Camrack cup rack is a purpose-built warewashing rack designed to hold up to 20 cups or mugs per cycle through a commercial dishwasher or glasswasher. It is a straightforward, well-engineered piece of kit that addresses one of the more common frustrations in busy warewash operations: water pooling in the base of cups and mugs after the wash cycle.

What sets this rack apart from a standard flat-peg rack is its tilted compartment design. Each compartment sits at an angle so that water drains away from the cup base during the wash and rinse cycles rather than collecting inside. In practice, this means cups come out drier and ready for service faster, with less need for hand-drying — which matters during a busy breakfast service or pre-service setup when speed and hygiene both count.

• Tilted compartments drain water from cup bases automatically during the wash cycle
• Suited to cups and mugs up to 110mm diameter, including those with handles
• Consistent rack format integrates with standard Cambro rack systems
• Supplied in soft grey as standard; alternative colours are available
• Durable construction suitable for repeated commercial dishwasher use

This rack is designed for operations handling a steady volume of cups — cafés, hotel breakfast services, staff canteens, and similar environments where cup throughput is consistent and hygiene standards are non-negotiable. For operations running very high volumes across multiple dishwasher lanes, it is worth considering whether additional racks or a higher-capacity rack format would better suit the workflow.

If you are unsure which Cambro rack configuration works best alongside your existing warewash setup, or need guidance on colour coding for allergen or section separation, we are happy to help you work through the options.

This plate and saucer insert is a plastic divider unit designed to sit inside a standard warewash rack, organising up to 12 plates or saucers into individual upright slots during the wash cycle. It is a straightforward accessory used across commercial kitchens, cafés, and banqueting operations to keep crockery separated, reduce breakage, and ensure water and detergent can circulate effectively around each item.

In a busy service environment, loose crockery stacked into a basket without dividers tends to nest together, which prevents thorough cleaning and increases chipping and breakage over time. An insert of this type keeps each plate or saucer held individually and upright, which supports more consistent wash results and extends the working life of the crockery.

Practical advantages include:

• Keeps crockery separated throughout the wash and rinse cycle
• Reduces contact between items, lowering the risk of chipping
• Allows water and detergent spray to reach all surfaces properly
• Lightweight and easy to reposition or remove from the rack
• Compatible with standard commercial dishwasher rack formats

It is worth confirming that the insert dimensions are compatible with your existing rack before ordering, as rack formats do vary between machine manufacturers. This insert suits plates and saucers up to a moderate diameter — very large dinner plates may require a different format or fewer slots per insert.

This type of insert is well suited to smaller operations running a consistent crockery format. Higher-volume sites processing large quantities of mixed crockery sizes may benefit from a broader range of rack and insert configurations to cover different plate diameters and depths.

If you are building out or replacing a warewash rack set-up and want to ensure the right combination of baskets and inserts for your machine and crockery, the team is happy to help you work through the options.

This is a standard open-format plastic warewashing basket designed for commercial pass-through and undercounter dishwashers built around the 395mm rack format. Unlike peg-style or divided baskets, the open design places no fixed constraints on how ware is loaded, making it a practical choice for kitchens where the wash load changes across the day or includes items that don't sit neatly in a compartmentalised rack.

During busy service periods, open baskets come into their own. Operators can load and unload quickly without working around pegs or dividers, which helps maintain throughput when the machine is running continuously. The format handles a broad range of ware — pots, pans, gastronorm trays, mixing bowls, and other bulkier items that would otherwise be awkward to fit in a divided rack.

• Unrestricted loading for irregular, oversized, or mixed items
• Quick to load and unload during high-turnover service
• Straightforward to rinse and inspect between cycles
• Lightweight construction that reduces handling strain over a long shift
• Durable plastic construction suited to repeated daily commercial use

Before ordering, it is worth confirming the internal rack dimensions of your machine. Fitting tolerances vary between manufacturers, and this basket is designed specifically for machines built around the 395mm format — it will not suit all dishwashers. Checking your equipment's specification before purchase avoids unnecessary returns.

This basket is well suited to smaller and medium-sized operations running a single pass-through or undercounter machine. Sites processing very high continuous volumes, or those with more specific ware-handling requirements, may find a more specialised basket better matched to their needs.

If you are unsure whether this basket is compatible with your machine, our team is happy to help you confirm the fit before you order.

The Cambro PR314151 is a 9 x 9 peg rack designed to hold plates, bowls, trays and plate covers securely during a commercial dishwasher cycle. The upright pegs locate items individually, preventing contact between pieces and allowing water and detergent to reach all surfaces consistently. It fits standard rack-size dishwashers as used across the catering industry.

In a busy warewash area, consistency matters as much as speed. A well-loaded peg rack keeps crockery stable at high wash temperatures and under the force of rotating spray arms, reducing the likelihood of items toppling or chipping during the cycle. The fixed peg layout also encourages correct loading discipline, which helps maintain throughput during peak service when staff are working quickly under pressure.

Practical advantages for a working kitchen include:

• Accommodates a range of plate diameters without additional inserts
• Pegs keep items separated, supporting effective wash and rinse coverage
• Robust construction handles the repeated thermal cycling of commercial dishwashers
• Consistent rack dimensions allow easy stacking and storage in the warewash area
• Compatible with standard dishwasher rack systems used across most commercial sites

This rack is well suited to kitchens running moderate to high volumes of mixed crockery — restaurants, hotels, contract catering operations and staff canteens where plate sizes vary across the menu. For sites running very high volumes or specialised crockery formats, it is worth considering whether a different rack configuration would improve throughput further.

If you are building out a warewash rack set or are unsure which combination of racks suits your crockery profile and machine type, our team is happy to talk it through with you.

This is a 500mm square wire plate basket designed for use in commercial rack or pass-through dishwashers that take a 500mm basket format. The frame is plastic-coated wire, which protects both the basket structure and the crockery it carries during the wash cycle.

In a busy kitchen environment, plate baskets take a considerable amount of daily punishment — loaded, unloaded, stacked, and pushed through the machine repeatedly across a full service. A well-constructed wire basket holds its shape under this routine use and keeps plates stable during the wash, reducing the risk of chips or breakage from plates shifting mid-cycle.

The plastic coating serves a practical purpose beyond corrosion resistance: it softens the contact points between the wire and the plate rim, which helps protect crockery over time. It also makes the basket easier to handle and stack when hot.

• Compatible with standard 500mm commercial dishwasher and warewasher systems
• Plastic coating protects crockery and resists corrosion
• Open wire construction allows water and detergent to reach all surfaces
• Stable plate positioning reduces movement and breakage during washing
• Straightforward to clean and dry between service periods

This basket is suited to most food service operations running a 500mm machine — from restaurant and pub kitchens to staff canteens and event catering. If your site runs particularly high plate volumes or operates multiple machines, it is worth considering whether a larger basket inventory would better support your throughput.

If you are unsure whether this basket is compatible with your existing machine or need to discuss quantities for a full kitchen setup, the team is happy to help.

The Cambro Camrack 16-compartment cup rack is a purpose-built warewashing rack designed to hold cups and coffee mugs securely through a commercial glasswasher or dishwasher cycle. It is supplied in a soft grey finish as standard, though other colours are available within the Cambro rack system, which can be useful where kitchens colour-code their warewash sorting.

What sets this rack apart from a standard cup basket is its built-in tilt feature. When the rack is tipped at the end of the wash cycle, water drains fully from the base of each cup rather than pooling inside. In a busy café, restaurant, or hotel breakfast operation where cups cycle continuously through service, this makes a practical difference to drying times and helps maintain hygiene standards without staff needing to hand-dry each piece.

The rack is suited to cups and mugs up to 110mm in diameter including the handle, and the 107mm internal compartment height accommodates a wide range of standard catering crockery. Key practical points worth noting:

• Tilt-drain design removes standing water from cup bases after washing
• 16 compartments per rack supports efficient throughput in continuous service
• Colour-coded options available for multi-rack sorting systems
• Compatible with standard commercial dishwasher and glasswasher rack formats
• Durable Cambro construction suited to repeated daily wash cycles

This rack is well suited to cafés, hotel food and beverage operations, staff canteens, and any site running a high volume of cups through a commercial machine. Sites with larger throughput requirements or a need for different compartment configurations may find other sizes within the Camrack range more appropriate.

If you are building out a full rack system or unsure which configuration works best for your machine and crockery profile, we are happy to help you work through the options.

A 400mm square wire glasswasher basket is a standard warewashing accessory used with the majority of commercial undercounter and passthrough glasswashers. The open wire construction allows water and detergent to circulate freely around glassware during the wash cycle, which is important for consistent cleaning results and effective rinsing.

In a busy bar or hospitality environment, having enough baskets in rotation is as important as the machine itself. Running short during service means glasses sit waiting rather than being turned around, which creates pressure at the bar and slows throughput. Keeping a practical stock of spare baskets helps maintain a steady flow without relying on a single basket completing its full cycle before the next load is ready.

Wire baskets of this type are commonly used across pub bars, hotel bars, restaurants, and event catering operations where speed of glass turnaround matters. They are straightforward to load, easy to inspect for cleanliness, and simple to replace when worn.

If you are unsure how many baskets suit your service volume, or whether this size is compatible with your existing machine, we are happy to advise before you order.

This is a 500mm square wire glasswasher basket with a plastic coating, designed to fit standard 500mm undercounter and passthrough glasswashers commonly used in bars, pubs, and catering operations. The plastic coating protects both the basket frame and the glassware during the wash cycle, helping to reduce chipping and extending the working life of the basket itself.

In a busy bar or service environment, having the right number of baskets in rotation is as important as the machine itself. A well-matched basket keeps the workflow moving — glasses loaded, cycled, and back in service without bottlenecks. Wire baskets of this type are well suited to frequent daily use and are straightforward to rinse down and inspect between cycles.

• Plastic coating cushions glassware and protects the wire frame from corrosion
• Fits standard 500mm glasswashers used across bars, pubs, and catering kitchens
• Open wire construction allows free water and detergent circulation during the wash
• Simple to stack and store when not in rotation
• Practical replacement or additional basket for existing 500mm machines

It is worth confirming compatibility with your specific machine before ordering, as basket dimensions and peg configurations can vary between manufacturers even within the 500mm footprint. If you are equipping a new operation or replacing a full set, the team are happy to advise on how many baskets typically suit a given service volume.

A cutlery basket is a straightforward but essential accessory for any commercial dishwasher operation. It holds cutlery upright and separated during the wash cycle, allowing water and detergent to circulate properly around each item rather than items nesting together and coming out poorly cleaned.

In a busy kitchen environment, having a dedicated cutlery basket in rotation means staff can load cutlery quickly and consistently without handling each piece individually. It is a small detail that has a noticeable effect on throughput at the pot wash station, particularly during service peaks when turnaround speed matters.

• Keeps cutlery separated for thorough wash coverage on all surfaces
• Speeds up loading compared to placing cutlery loose in a rack
• Straightforward to rinse out between cycles
• Compact size fits within standard dishwasher baskets and racks

These baskets are designed to sit within a standard dishwasher rack. They are a common addition in cafés, restaurants, staff canteens, and pub kitchens where cutlery volumes are high. If your operation runs multiple dishwasher cycles back to back, having several baskets in rotation will keep the line moving without waiting for one basket to complete its cycle before reloading.

If you are unsure whether this basket is compatible with your existing dishwasher rack configuration, or if you need to work out how many baskets suit your cover count, we are happy to help you get it right.

This is a standard 350mm square wire glasswasher basket, designed to fit the wash chamber of most commercial glasswashers that accept the common 350mm rack format. Wire baskets of this type are the everyday workhorse of bar and catering warewash operations — open enough to allow water and detergent circulation around glassware, robust enough to handle repeated wash cycles in a busy service environment.

In practice, having an adequate stock of baskets matters as much as the machine itself. A single basket creates a bottleneck; most operations running a 350mm glasswasher will want several in rotation to keep dirty glasses moving through the cycle without interruption during peak service.

• Standard 350mm square format fits most commercial glasswashers accepting this rack size
• Open wire construction allows good water and chemical circulation around glassware
• Suitable for continuous rotation across multiple wash cycles
• Practical as a direct replacement for worn or damaged baskets
• Useful as additional stock to reduce service bottlenecks

It is worth checking the internal rack guides and wash arm clearance of your specific machine before ordering, as basket depth and wire gauge can vary between suppliers. If you are unsure whether this basket is compatible with your glasswasher, or you need guidance on how many baskets suit your service volume, feel free to get in touch with the team.

This glass basket insert is a purpose-made plastic insert designed to sit within a standard 500×500mm warewasher basket on the Classeq C500 range. Its function is straightforward: it holds glasses at a tilted angle rather than upright, allowing the wash and rinse water better access to the interior of each glass during the cycle.

In practice, upright glassware is one of the more common causes of poor wash results — water pools inside the bowl rather than draining freely, and the spray arms can struggle to reach the interior surfaces effectively. By angling the glasses, this insert addresses that directly. It is a simple intervention that makes a measurable difference to cleanliness and reduces the need to re-wash or hand-polish after service.

• Angles glassware for improved spray arm access to interior surfaces
• Helps reduce pooling and residue inside glass bowls
• Fits and removes quickly with no tools required
• Lightweight plastic construction — easy to handle during busy turnaround
• Designed specifically for use with the Classeq C500 basket range

It is worth confirming your current basket size before ordering — this insert is dimensioned for 500mm baskets and will not seat correctly in smaller formats. If you run a mixed glasswasher setup or are unsure which basket size your machine uses, it is worth checking before purchasing.

This insert suits any licensed premises, hotel bar, or catering operation running a Classeq C500 series glasswasher where glassware wash quality is a concern. It is a low-cost addition that often resolves persistent clarity issues without any changes to chemistry or cycle settings.

If you are unsure whether this insert is the right fit for your machine or basket configuration, our team is happy to check the compatibility before you order.

This is a replacement or additional wash basket designed specifically for Classeq C500 series warewashers. It follows the standard 500x500mm footprint used across that range and features tall open sides rather than the lower-profile design typically used for crockery. That height difference is what makes it suited to glasses and cups, which need upright support to wash and drain properly without toppling or nesting inside one another.

In a busy bar or front-of-house environment, having a dedicated glass basket rather than improvising with a general-purpose one makes a meaningful difference to throughput. Glasses sit more securely, the open construction allows water and detergent to reach all surfaces, and the taller sides reduce the risk of items shifting mid-cycle. For venues running continuous glasswashing during service, having a second or third basket in rotation — one washing, one being loaded, one being unloaded — is a straightforward way to keep the machine moving without interruption.

The basket is constructed from plastic, which keeps it light enough to handle repeatedly during a shift without operator fatigue becoming an issue. At 2kg unladen, it is easy to carry even when loaded with glassware.

A few practical points worth noting: this basket is sized for the Classeq C500 range and may not be compatible with machines from other manufacturers or Classeq models that use a different basket footprint. It is worth confirming your machine model before ordering if you have any doubt.

If you are unsure whether this basket suits your machine or want to discuss how many baskets make sense for your service volume, the team is happy to help you work that out.

This glass basket insert is a straightforward plastic accessory designed to sit inside a standard 400x400mm warewasher basket. Its purpose is simple: it holds glasses at a tilted angle during the wash cycle, allowing water and detergent better access to the interior of each glass rather than pooling at the base. It is made to fit the Classeq C400 range of glasswashers and can be fitted or removed without tools.

In a busy bar or service environment, consistent glass clarity matters. Glasses washed flat or upright often retain residue inside where spray coverage is limited. By angling the glassware, this insert helps the machine do its job more effectively, reducing the need to re-wash glasses during service — a small detail that makes a practical difference when throughput is high.

• Improves spray access to the interior of glasses during each wash cycle
• Reduces the likelihood of residue or watermarks on glassware
• Easy to fit and remove without disrupting basket loading
• Lightweight plastic construction adds minimal weight to the basket load

Being a plastic insert, it is lightweight and straightforward to handle. It is worth noting this is a purpose-specific accessory — it is designed for glassware, not crockery or cutlery, and its benefit is most apparent with tall or stemmed glasses where interior coverage would otherwise be compromised.

This insert is well suited to any operator running a Classeq C400 glasswasher who wants to improve wash results on glassware without changing chemicals or cycle settings. If you are unsure whether this insert is compatible with your current basket configuration, feel free to get in touch and we can confirm before you order.

This Classeq dish insert is a simple plastic accessory designed to convert a standard 400x400mm open wash basket into one that can hold plates and dishes upright during the wash cycle. Without an insert of this type, open baskets offer no support for crockery, making them unsuitable for anything other than lightweight items. The insert drops in and out without tools, giving operators the flexibility to switch between basket configurations as demand requires.

In practical terms, this insert is most useful in sites where the volume of crockery passing through the machine is relatively low and where a dedicated plate rack would represent unnecessary expense or take up storage space that isn't available. It works well as a secondary option — keeping a single open basket convertible for the occasional plate load without committing to additional specialist equipment.

• Converts an open basket to accept plates and dishes without additional investment
• Fits and removes quickly, keeping the basket versatile between services
• Lightweight plastic construction adds negligible weight to the basket
• Suited to low-to-moderate crockery volumes where a dedicated rack isn't warranted

It's worth noting that this insert is a light-duty solution. Sites washing significant quantities of crockery throughout a busy service would be better served by a dedicated plate rack designed specifically for that purpose. The insert is designed for occasional use rather than sustained high-throughput warewashing.

If you're unsure whether this insert or a more purpose-built basket arrangement would suit your operation better, the team is happy to talk through your warewash setup before you order.

This is the dedicated plate basket for Classeq D400 and G400 warewashers, designed to hold standard plates securely during the wash cycle. It fits the 400mm rack format used by both machines and features integral plate locks that grip each plate in position, preventing movement and reducing the risk of breakages or inadequate wash coverage.

In a busy service environment, consistent plate positioning matters. Plates that shift or lean during a cycle can block spray arms, wash unevenly, or come out needing a re-run — none of which is useful at pace. The plate locks address this directly, keeping each plate upright and correctly spaced so the wash reaches all surfaces reliably.

• Fits Classeq D400 and G400 warewashers as a direct replacement or additional basket
• Plate locks hold plates firmly in position throughout the cycle
• Helps maintain consistent wash results and reduce breakages
• Lightweight at 500g, easy to handle and stack when not in use
• 400 x 400mm footprint matches the standard rack size for both machines

This basket is a like-for-like fit for the D400 and G400 only — it is not a universal rack and will not suit other warewasher models. If you are running multiple machines or need to increase throughput, it is worth confirming compatibility with your specific unit before ordering.

If you are unsure whether this basket suits your setup, or if you need to discuss spares and accessories for your warewash installation, the team is happy to help.