Manitowoc Ice Machines and Ice Cream Machines

The Manitowoc Indigo NXT iT1900 is a large-capacity modular ice machine producing half dice ice at a rate of 819kg per 24 hours, paired with the D970 storage bin which holds up to 323kg. At this scale, the combination is intended for operations where ice demand is constant, high, and non-negotiable — not somewhere that a smaller unit has been pushed beyond its limits.

In busy service environments, the iT1900 is well suited to sustained, heavy demand across long operating days. The machine is designed to continue producing at full output even when ambient temperatures reach 43°C, which matters in kitchen or back-of-house environments that run hot during service. The integrated diagnostics monitor the ice-making process in real time, flagging inefficiencies or early signs of maintenance requirements before they become operational problems. When demand drops, the machine adjusts accordingly to avoid unnecessary energy consumption, then ramps back up when output is needed.

Practical operational advantages include:

• Consistent half dice ice output suited to high-volume beverage, food prep, and display applications
• Large onboard storage reduces the frequency of production cycles required to meet demand
• Diagnostic system supports planned maintenance rather than reactive repair
• Designed to operate reliably in warm ambient conditions without loss of output
• Energy modulation reduces running costs during lower-demand periods

This is a substantial piece of equipment — the combined unit stands over two metres tall and requires a dedicated, level installation space with adequate clearance for airflow and servicing access. Water supply and drain connections are required, and a correctly sized water filtration system is strongly recommended; limescale accumulation is one of the most common causes of premature wear and ice quality deterioration in high-output machines, and at this capacity the consequences of neglecting filtration are significant. Electrical supply requirements should be confirmed at the planning stage. Installation by a qualified engineer is advised.

The iT1900 is best suited to high-volume venues where ice supply is operationally critical — large hotels, stadium and arena catering, central production kitchens, busy bars, or large-scale food retail environments. For operations with more modest but still substantial requirements, smaller-output models within the Indigo NXT range may be a more appropriate and cost-effective fit. For sites with demand that regularly exceeds what a single unit can support, a multi-machine configuration may be worth discussing.

If you are unsure whether this output level matches your site's realistic daily demand, or have questions about installation requirements, our team is happy to talk through the details before you commit.

The Manitowoc Indigo NXT iT1500 is a high-output modular ice machine designed for operations where ice supply is genuinely business-critical. Producing half dice ice, it is supplied here as a complete unit with the D970 stainless steel storage bin, giving a substantial reserve of ice that can be drawn down continuously throughout a busy service period.

At this output capacity, the iT1500 is built for environments where ice demand is constant and any interruption has a real operational cost — think large hotels, stadium catering, hospital kitchens, high-volume bars, or food retail operations running chilled displays. The machine is engineered to continue operating reliably even when kitchen or ambient temperatures are elevated, which matters in warmer back-of-house environments during summer service. The Indigo NXT control platform provides integrated diagnostics that can alert operators to developing issues before they become failures, which reduces unplanned downtime.

From an operational standpoint, the combination of modular ice head and paired storage bin offers several practical advantages:

• High daily output supports continuous demand without running the bin dry during peak service
• Half dice format is widely compatible with both drinks service and food display applications
• Onboard diagnostics reduce reliance on reactive service calls
• Efficiency programming adjusts output during quieter periods to manage running costs
• The D970 bin provides hygienic, accessible ice storage with straightforward cleaning

Installation at this scale requires careful planning. The unit is heavy and the overall assembled height exceeds two metres, so access routes, ceiling clearance, and floor loading all need to be considered before delivery. A mains water supply and drain are required, and given the output volume involved, a correctly specified water filtration system is strongly recommended — limescale accumulation at this throughput can cause significant mechanical damage over time and will affect ice quality. Adequate ventilation around the condenser is essential; the machine will not perform to specification if airflow is restricted by adjacent equipment or enclosures.

This machine is suited to large-scale food service and retail operations with a consistent, high daily demand for ice. For smaller sites or those with intermittent requirements, a lower-output model may represent a better operational and financial fit — and for very large central production environments, higher-capacity alternatives are available in the range.

If you are unsure whether this model matches your daily demand, water supply conditions, or available space, our team is happy to talk through the details with you before you commit.

The Manitowoc Indigo NXT iT1200 is a modular half dice ice machine paired with the D970 storage bin, offering a serious daily output suitable for the most demanding commercial environments. It operates as a self-contained ice production and storage solution, producing half dice cubes — a versatile format widely used in food service, bar operations, healthcare, and large-scale retail. Half dice ice is valued for its fast chill rate and consistent portion delivery across high-turnover applications.

In busy service environments, the iT1200 is built to keep pace without compromise. The machine is engineered to continue producing ice at elevated ambient temperatures, which matters in kitchen or back-of-house environments where heat from cooking equipment or poor ventilation can undermine ice machine performance. Onboard diagnostics actively monitor and adjust the ice-making cycle, which helps maintain consistent output and flags potential issues before they become costly failures — a practical advantage in operations where ice supply cannot be interrupted.

From an operational standpoint, this unit offers several meaningful advantages:

• Large storage capacity reduces the risk of running short during peak service periods
• Efficiency management scales back energy use during quieter periods without operator input
• Half dice format suits a wide range of applications from beverage service to food display
• Advanced diagnostics reduce downtime and support planned maintenance
• Stainless steel construction supports hygiene standards and withstands heavy daily use

As a modular unit, the iT1200 head sits on top of the D970 bin and requires adequate clearance for ventilation — the full assembled height is substantial, so ceiling height and access routes should be confirmed before ordering. A mains water connection and drainage point are required, and installation in a well-ventilated space is important for sustained performance. Limescale is a genuine risk to ice machine longevity; fitting a suitable water filtration system before installation is strongly advisable and will protect both ice quality and the machine's internal components over time.

This combination is well suited to hotel banqueting operations, large pub and bar groups, hospital catering departments, central production kitchens, and high-volume food retail environments where ice demand is continuous and significant. It is not an appropriate choice for smaller cafés or kitchens with modest, intermittent ice requirements — for those settings, a lower-output countertop or smaller modular unit would be a better fit. Equally, for operations with demand that pushes beyond this output, higher-capacity configurations are available.

If you are unsure whether the iT1200 is correctly sized for your operation, or have questions about water filtration, ventilation, or installation, our team is happy to talk it through with you before you commit.

The Manitowoc Indigo NXT iT0900 is a high-capacity modular ice machine producing half dice ice, supplied here as a complete unit with the D970 storage bin. The machine sits on top of the bin to form a self-contained ice-making and storage system, with the D970 holding a substantial quantity of ice ready for service at any time. Half dice ice is a widely used format in commercial environments — it chills drinks quickly, packs efficiently, and is well suited to both glass service and food display applications.

At its rated output, this machine is built for sites where ice demand is continuous and high throughout the day. The Indigo NXT platform includes onboard diagnostics that monitor the ice-making cycle and flag issues before they affect service — a practical feature in busy operations where downtime is costly. The system is also rated to operate in ambient temperatures up to 43°C, which matters in kitchen and back-of-house environments where heat from cooking equipment can affect performance on lesser machines. Efficiency modes allow the machine to ease back during quieter periods, which helps manage running costs over a full operating day.

From an operational standpoint, the combination of high daily output and large bin storage means most busy sites can draw heavily on stored ice during peak service without the machine struggling to keep pace. Key practical advantages include:

• High-volume half dice output well suited to drinks service and food presentation
• Large bin capacity reduces the risk of running short during peak demand
• Intelligent diagnostics support proactive maintenance and reduce unexpected downtime
• Efficiency programming helps lower running costs during quieter trading periods
• Rated for operation in high-ambient-temperature environments

Installation requires a mains water supply with adequate flow and pressure, a drainage point, and an appropriate electrical supply. Because limescale is one of the most common causes of ice machine damage and reduced output, a water filtration system is strongly advisable prior to installation — particularly in hard water areas. The combined unit is a substantial piece of equipment and will need sufficient floor space and clear access for servicing. Ventilation clearances should be observed to maintain performance, especially in warm plant rooms or tight back-of-house areas.

This machine is best suited to high-volume operations such as large hotel bars, busy restaurant groups, event catering facilities, and high-throughput food service sites where ice demand is sustained across long service periods. For smaller operations with more modest daily requirements, lower-output alternatives in the Indigo NXT range may offer a more practical fit without over-specifying. For sites with even greater demand, higher-capacity modular options are available.

If you are unsure whether this machine is correctly sized for your operation, or have questions about water filtration and installation requirements, we are happy to talk it through before you commit to a purchase.

The Manitowoc Indigo NXT iT0900 is a high-capacity modular ice machine producing half dice ice at up to 378kg per 24 hours, paired here with the D570 storage bin which holds up to 195kg of ice. Half dice is a widely used format across bars, restaurants, healthcare, and large-scale catering operations — it chills drinks efficiently, portions reliably, and handles well in busy service environments. The unit sits on top of the D570 bin, forming a self-contained ice production and storage solution designed to run continuously.

At this output level, the iT0900 is built to sustain production through extended service periods and elevated ambient conditions. The Indigo NXT control system actively monitors the ice-making cycle and adjusts the process to maintain consistent output. This is particularly relevant in busy kitchen or bar environments where ambient temperatures can climb during service — the machine is engineered to continue producing reliably under those conditions rather than throttling back when you need it most. When demand drops, the system scales accordingly, which helps reduce unnecessary energy consumption during quieter periods.

From an operational standpoint, the combination of high daily output and substantial bin capacity means most sites will carry a useful ice reserve rather than running the risk of falling short during peak hours. Key practical advantages include:

• Consistent half dice format suited to drinks service, food display, and healthcare use
• Onboard diagnostics that help identify performance issues before they become service failures
• Bin design that allows straightforward, hygienic access to stored ice
• Adjustable output to match demand across different times of day or week
• Stainless steel construction throughout, supporting hygiene compliance and longevity

Installation requires a dedicated water supply, a drain connection, and appropriate electrical provision — confirm your available supply against the machine's requirements before ordering. Adequate ventilation around the unit is important; restricted airflow will affect performance, particularly in warm back-of-house locations. The combined footprint of machine and bin is substantial, so measure your available space carefully, including ceiling clearance for the stacked height. A water filtration system is strongly recommended: limescale accumulation is one of the most common causes of premature ice machine failure in UK sites with hard water, and it will affect both ice quality and warranty coverage if left unaddressed.

This machine is well suited to large restaurants, hotel bars, stadium or events catering, healthcare facilities, and any operation where ice demand is consistently high throughout the day. For smaller sites with more modest requirements, lower-output models in the Indigo NXT range will be more appropriate both in terms of capacity and running cost. Conversely, multi-machine installations or larger centralised ice rooms may be worth considering for very high-volume sites.

If you are unsure whether this output level matches your actual demand, or if you have questions about water quality, installation conditions, or filtration, our team is happy to work through the specifics with you before you commit.

The Manitowoc Indigo NXT iT0750 is a modular commercial ice machine producing half dice ice, supplied here with the D570 storage bin. The unit sits at the higher end of the Manitowoc Indigo NXT range and is built for operations where a consistent, large-volume supply of ice is a genuine operational requirement rather than a convenience.

At a daily output rate suited to demanding service environments, this machine is commonly found in large hotels, busy bars, event catering operations, and food retail sites where ice demand runs throughout the day and into the evening. The half dice format is a versatile ice type — it works well in drinks service, chilled displays, and food preparation alike. Importantly, the machine is rated to continue operating in ambient temperatures up to 43°C, which matters in kitchen or back-of-house environments where heat build-up is a real factor during service.

The Indigo NXT control system actively monitors the ice-making process and adjusts output to match conditions, which helps avoid unnecessary energy consumption during quieter periods while ensuring full capacity is available at peak times. The onboard diagnostics give operators and service engineers useful visibility into performance and potential issues before they become downtime.

• Large 195kg storage capacity via the included D570 bin reduces the risk of running short during extended service periods
• Half dice ice suits both drinks service and chilled food display applications
• Adaptive controls help manage running costs without manual intervention
• Diagnostic system supports faster fault identification and reduced service downtime
• Stainless steel construction throughout supports hygiene standards in commercial environments

Installation requires a dedicated water supply, a suitable drain connection, and adequate electrical supply — it is worth confirming your electrical provision meets requirements before ordering. Ventilation clearance around the unit is essential; modular ice machines generate heat during the freezing cycle and adequate airflow directly affects output consistency. The combined footprint of the ice machine head and D570 bin is substantial, so access routes and final positioning should be planned in advance. Water quality is a significant factor with any ice machine — limescale build-up is one of the most common causes of reduced output and premature component wear. Fitting a suitable water filtration system is strongly advised and, in hard water areas, should be treated as a requirement rather than an optional extra.

This machine is best suited to high-volume operations with a genuine daily ice demand — large licensed venues, hotels with multiple service points, catering companies running large events, or any site where ice availability is operationally critical. For sites with more modest requirements, smaller-capacity machines in the Indigo NXT range may be a more cost-effective and practical fit. For extremely high-throughput sites or multi-point installations, it is worth discussing whether a single unit or multiple machines better suits your layout.

If you are unsure whether this machine is the right size for your site, or have questions about water supply, drainage, or installation requirements, the team is happy to talk it through before you commit to an order.

The Manitowoc Indigo NXT iT0750 is a modular half dice ice machine paired with the D400 storage bin, combining high-capacity ice production with a practical storage solution in a single unit. Half dice ice is widely used across commercial catering — it packs well, cools drinks quickly, and works effectively in blended and chilled food applications. This is a serious production unit intended for operations where ice availability is operationally critical.

With a production rate of 283kg per 24 hours, this machine is designed to sustain output through extended service periods without being managed around. The Indigo NXT platform includes onboard diagnostics that monitor the ice-making cycle and flag issues early, reducing the risk of unexpected downtime during service. The machine is rated to operate in ambient temperatures up to 43°C, which makes it a reliable choice for kitchens where the environment gets warm during peak periods. The D400 bin holds up to 132kg of ice in reserve, providing a meaningful buffer between production and demand.

From an operational standpoint, the iT0750 offers several practical advantages:

• Adaptive output management reduces energy consumption during periods of lower demand
• Advanced diagnostics support proactive maintenance and reduce unplanned downtime
• Half dice format suits a wide range of service applications from drinks to food display
• Stainless steel construction supports hygiene standards and day-to-day durability
• High-capacity bin reduces how frequently staff need to manage ice supply during service

This is a modular unit, meaning the ice head sits on top of the storage bin — the combined assembly requires adequate overhead clearance and a stable, level surface capable of supporting the combined weight of machine, bin, and stored ice. A mains water connection is required, and it is strongly advisable to fit a water filtration system: limescale is one of the leading causes of ice machine failure in the UK, and an unfiltered supply can significantly shorten service intervals and compromise ice quality. Electrical supply requirements should be confirmed prior to installation. Access for servicing the ice head should also be factored into the installation layout.

The iT0750 is well suited to busy restaurants, hotel bars, large catering kitchens, and high-footfall food retail environments where ice demand is consistent and high throughout the day. For smaller operations with more modest throughput requirements, a lower-capacity machine in the Indigo NXT range may be a more appropriate and cost-effective fit. Equally, for very large central production sites or venues running multiple service points simultaneously, a heavier-duty configuration may warrant consideration.

If you're not certain whether this output capacity matches your expected demand, or if you'd like guidance on water filtration and installation requirements, we're happy to work through the details with you before you commit.

The Manitowoc Indigo NXT iT0500 is a modular half dice ice maker designed for sites with consistently high ice demand. It operates as a head unit mounted above the included D570 storage bin, producing half dice ice — a format widely used in busy bar and beverage service for its chilling efficiency and presentation. Together, the two units provide substantial continuous supply and storage capacity, making this a practical pairing for high-throughput venues.

In real operational terms, this machine is built to sustain output across long service periods and in challenging ambient conditions. Its ability to continue producing ice at elevated ambient temperatures gives it reliability in hot kitchen and back-of-house environments where lesser units can struggle to maintain output through a busy evening service. The Indigo NXT platform includes onboard diagnostics that monitor the ice-making cycle and flag issues early, which helps reduce unexpected downtime and supports planned maintenance routines.

From an operational standpoint, the iT0500 offers several practical advantages for busy kitchens and bars:

• Sustained output helps ensure ice availability throughout peak service without manual intervention
• The D570 bin provides hygienic, easy-access storage that keeps ice clean and readily available to staff
• Onboard diagnostics simplify maintenance and reduce the need for reactive engineer callouts
• Efficiency controls help reduce energy and water consumption during quieter periods
• Half dice format is well suited to beverage service, display ice, and blended drinks applications

This is a modular unit that requires a dedicated water supply, drainage, and an appropriate electrical connection. The D570 bin is supplied as part of this package, but the installation space needs to accommodate both the ice head and the bin together. Given the overall height of the combined unit, ceiling clearance and access for servicing should be confirmed before ordering. A water filter is strongly recommended — limescale build-up is one of the most common causes of premature ice machine failure and will affect both ice quality and machine longevity. If your site is in a hard water area, this is not optional.

This unit is well suited to hotels, large restaurants, event catering operations, busy bars, and food service sites where ice demand is sustained rather than occasional. It is more machine than most small cafés or low-volume operators need. For sites with more moderate requirements, a lower-output model would be a more cost-effective fit — and equally, very large-scale or multi-point operations may want to consider a higher-capacity alternative before committing.

If you are unsure whether the iT0500 is correctly sized for your service model, or if you have questions about installation requirements, our team is happy to work through the details with you before you order.

The Manitowoc Indigo NXT iT0500 is a modular ice machine producing half dice ice at up to 200kg per 24 hours, supplied here with the D400 storage bin which holds up to 132kg of ice. Half dice is one of the most widely used ice formats in commercial hospitality — it cools drinks rapidly, packs efficiently in glasses, and is a practical choice across bars, restaurants, hotels, and food service counters.

In a busy service environment, consistent ice supply is operationally critical. The iT0500 is built to maintain production even when ambient temperatures rise significantly — a useful characteristic in kitchen or back-of-house areas that can warm up considerably during peak periods. The machine's onboard diagnostics actively monitor the ice-making process, flagging issues early and helping to avoid unplanned downtime during service. When demand drops, the system scales back accordingly, which supports lower running costs across quieter periods without manual intervention.

From an operational standpoint, the combination of high daily output and a substantial storage reservoir means the machine can build ice inventory ahead of peak service periods rather than relying entirely on real-time production. Key practical advantages include:

• Consistent half dice output suited to high-turnover drinks service
• Intelligent production controls that respond to demand patterns
• Early diagnostic alerts to help prevent unplanned breakdown during service
• Hygienic, accessible storage bin for easy ice retrieval and cleaning
• Designed to operate reliably in warm ambient conditions

As a modular unit, the iT0500 head sits on top of the D400 bin, so the combined installation height is something to factor into your available space before purchase. The unit will require a mains water connection, a drain, and an appropriate electrical supply — if you're integrating this into an existing bar or kitchen setup, it's worth confirming these services are in place or can be routed to the intended position. We'd also strongly recommend a water filtration system: limescale is one of the most common causes of ice machine damage and reduced performance in UK water areas, and a correctly specified filter will protect the machine and help maintain ice clarity and quality over the longer term.

The iT0500 is well suited to high-volume hospitality operations — busy bars, hotel food and beverage departments, large restaurants, and catering contractors where ice demand is consistently high throughout the day. For smaller operations producing well under 100kg per day, a lower-capacity machine would likely be a more cost-effective fit. Equally, very large-scale sites with exceptionally high continuous demand may want to consider a higher-output model or multiple units.

If you're unsure whether this model is the right match for your site — or have questions about water filtration, installation requirements, or how to size ice production for your service volume — our team is happy to talk it through with you before you commit.

The Manitowoc Indigo NXT iT0620 is a modular commercial ice machine producing half dice ice, supplied here as a complete package with the D320 storage bin. Half dice is one of the most widely used ice formats in commercial operations — it displaces well in drinks, cools quickly, and is produced efficiently relative to its size. The iT0620 sits at the higher-output end of the Indigo NXT range, making it relevant to sites where ice demand is sustained throughout the day rather than limited to a short service window.

In busy service environments, ice machine performance is often tested not by peak output alone but by how well the unit maintains production when ambient temperatures are high. The iT0620 is designed to remain operational in ambient conditions up to 43°C, which is a meaningful consideration for sites where the ice machine sits in or near a hot kitchen space or poorly ventilated back-of-house area. The Indigo NXT control system includes built-in diagnostics and adaptive programming that adjust the ice-making cycle to operating conditions, helping to protect production consistency without requiring constant manual intervention.

From a practical standpoint, the combination unit offers several operational advantages:

• High daily output supports continuous demand across long service periods
• The 95kg storage bin maintains a meaningful ice reserve during demand spikes
• Adaptive controls help reduce energy consumption during quieter periods
• Built-in diagnostics simplify fault identification and reduce reactive maintenance time
• Half dice format is well suited to both beverage service and food display use

Installation requires a stable electrical supply, a mains water connection, and a suitable drain. Ambient temperature and ventilation around the unit will affect output — the installation space should be assessed before commissioning. Limescale is one of the most common causes of premature wear on ice machines; fitting a water filter appropriate to your local water hardness is strongly advisable and will protect both ice quality and machine longevity.

This unit is well suited to hotels, large restaurants, pub groups, catering operations, and food retailers where consistent, high-volume ice production is a daily requirement. It is a modular machine, meaning the ice-making head and bin are separate components — this also allows the head to be paired with a larger bin if your storage needs grow. For sites with more modest requirements, smaller-output models in the Indigo NXT range may be more appropriate and more cost-effective to run.

If you are unsure whether this output level is right for your site, or if you have questions about water treatment or installation requirements, our team is happy to talk it through with you before you order.

The Manitowoc Indigo NXT iT0420 is a modular half dice ice machine paired with the D420 storage bin, designed to meet sustained, high-volume ice demand in busy commercial environments. It produces half dice ice — a versatile format widely used in bars, hotels, hospitals, and food service operations — at a daily output that makes it one of the more capable units in the Indigo NXT range. The D420 bin sits beneath the machine head and holds a substantial quantity of ice in reserve, so service periods are supported even when demand outpaces production.

In real kitchen and bar environments, the iT0420's strength lies in its ability to maintain consistent output even when ambient temperatures are elevated — a relevant consideration for back-of-house locations in summer months or poorly ventilated plant rooms. The machine includes built-in diagnostics that monitor the ice-making process and flag issues before they become failures, which reduces unplanned downtime during critical service windows. The controls also allow output to be managed relative to demand, which helps keep running costs in check during quieter periods.

From an operational standpoint, the combination of high daily output and a generous bin capacity means operators are less likely to run short during peak service. Key practical advantages include:

• High daily ice output supports busy bars, hotel F&B operations, and healthcare settings
• Large bin capacity provides a meaningful ice reserve ahead of service
• Onboard diagnostics help identify performance issues before they cause downtime
• Designed to operate reliably in warm ambient conditions
• Half dice format suits a wide range of drink service and food display applications

Installation requires a dedicated water supply and drain, along with a suitable electrical connection. As with any ice machine, water quality has a direct impact on both ice quality and machine longevity — fitting an appropriate water filter is strongly advisable, particularly in areas with hard water where limescale build-up can cause progressive and costly damage. The combined unit is a floor-standing configuration, so adequate floor space and clearance for servicing should be confirmed before ordering. Weight and footprint should also be considered in relation to the installation area.

This machine is well suited to operations with consistently high ice demand — hotel bars, large restaurant groups, catering contractors, and busy healthcare or hospitality venues. For sites with more modest requirements, smaller-output models in the Indigo NXT range may offer a better fit without the associated running costs. Equally, very large central production kitchens or high-volume ice programmes may benefit from looking at heavier-duty options.

If you're unsure whether the iT0420 is the right specification for your site — or if you have questions about water treatment, installation, or bin compatibility — our team is happy to talk it through before you commit to a purchase.

The Manitowoc Indigo NXT iT0420 is a modular half dice ice machine paired with the D320 storage bin, together forming a self-contained ice production and storage solution for high-demand commercial environments. Half dice ice is widely used across foodservice — it packs well, melts at a controlled rate, and suits everything from drinks service to food display and salad bars. This unit sits at the larger end of the modular range, and is built to sustain continuous output through long service periods rather than acting as a top-up solution.

In real kitchen and bar environments, sustained output matters more than peak figures. The iT0420 is designed to maintain production even when ambient temperatures are elevated — a genuine consideration in busy kitchen environments where the surrounding air can become warm during service. The onboard diagnostics monitor the ice-making cycle and adjust operation accordingly, helping to maintain consistent output without requiring manual intervention. When demand drops, the machine scales back automatically, which contributes to lower running costs without compromising readiness when service picks up again.

From an operational standpoint, the combination of high daily output and substantial bin storage means the machine can work ahead of peak periods, reducing the risk of running short during busy service. Practical advantages include:

• Adaptive production control that responds to real demand patterns
• High-temperature tolerance suited to busy kitchen or back-of-house locations
• Self-contained modular format allowing installation alongside existing equipment
• Hygienic, easy-access bin storage for up to 95kg of ice
• Built-in diagnostics to support straightforward servicing and fault identification

On installation, this is a modular unit requiring a dedicated water supply and drain. Water quality is a significant operational consideration — limescale accumulation is one of the most common causes of ice machine failure, and fitting a suitable water filter is strongly recommended regardless of your local water hardness. Ensure the chosen location provides adequate ventilation around the unit, as restricted airflow affects efficiency and long-term reliability. The machine should be sited on a level, stable surface capable of bearing the combined weight of the unit and a full ice load.

The iT0420 is well suited to hotels, contract catering operations, large pub groups, busy bars, and food retail environments where ice demand is continuous and consistent supply is operationally critical. It is not the right choice for lower-volume sites where a smaller modular unit would be more cost-effective to run. For sites operating at even higher volumes or running multiple service areas simultaneously, heavier-duty options are worth considering.

If you are unsure whether this output level matches your operation's needs, or have questions about water treatment, siting, or installation requirements, we are happy to talk it through before you commit to a purchase.

The Manitowoc Indigo NXT iT0320 is a modular half dice ice machine designed for high-output commercial applications. It pairs with the D420 storage bin to deliver a complete, self-contained ice production and storage solution. Half dice ice is widely used in catering, bar, and food retail environments where fast chilling, portion control, and a clean presentation are all important.

With a production capacity of 145kg per 24 hours and a storage bin holding up to 141kg, this combination is well suited to operations where ice demand is both high and sustained throughout the day. The Indigo NXT platform includes built-in diagnostics that continuously monitor the ice-making cycle, helping to identify inefficiencies early and maintain consistent output. The machine is rated to operate in ambient temperatures up to 43°C, which makes it a practical choice for kitchens and back-of-house areas where cooling can be limited during warmer months or busy service periods.

From an operational standpoint, the key advantages are:

• Sustained output across long service periods without significant drop-off
• On-board diagnostics that reduce the risk of undetected faults building into costly failures
• Efficiency controls that scale energy use down during quieter periods
• The D420 bin provides hygienic, easily accessible ice storage with sufficient capacity to buffer peak demand
• Half dice format suits a wide range of drinks, display, and food chilling applications

As a modular unit, the iT0320 sits on top of the D420 bin rather than incorporating storage internally, which means the footprint is fixed by the bin width. Installation requires a mains water supply and drain, along with an appropriate electrical connection. Limescale is the most common cause of premature wear on commercial ice machines — fitting a water filtration system before installation is strongly advisable and will protect the machine's internal components, maintain ice clarity, and help preserve the warranty. Water quality should be assessed before commissioning.

This combination is most appropriate for busy restaurants, hotels, bars, contract caterers, and food retail operations with consistently high ice demand. For smaller operations with moderate requirements, a lower-output machine may offer a better balance of capacity and running costs. For very large sites — such as central production kitchens or high-volume hospitality venues — it is worth discussing whether a higher-capacity model would be more appropriate for your throughput.

If you are unsure whether the iT0320 is the right fit for your operation, or if you have questions about water filtration, installation, or ice type suitability, our team is happy to talk it through with you before you commit to a purchase.

The Manitowoc Indigo NXT iT0320 is a modular half dice ice machine paired with the D320 storage bin. Together they form a self-contained ice production and storage solution capable of meeting the demands of busy commercial service environments. Half dice ice is widely used across bars, hotels, restaurants, and food service counters — it packs efficiently, chills quickly, and works well in both drinks service and food display applications.

With a daily output of 145kg, this machine is built to sustain output throughout long service periods. The Indigo NXT platform includes onboard diagnostics that monitor the ice-making process in real time, helping the machine maintain consistent output and flag potential issues before they cause downtime. The unit is also rated to continue producing ice in ambient temperatures up to 43°C, which makes it a practical choice for kitchens and back-of-house areas that warm up significantly during service — a common limitation with lower-specification machines. When demand falls, the system adjusts its cycle accordingly to avoid unnecessary energy consumption.

From an operational standpoint, the combination of high daily output and a 95kg storage bin means ice is available on demand without waiting for production cycles to catch up during peak periods. Key practical advantages include:

• Consistent half dice output suitable for a wide range of food and drinks service applications
• Integrated diagnostics that reduce the risk of unexpected breakdowns during service
• High ambient temperature tolerance, well suited to warm or poorly ventilated back-of-house areas
• Demand-responsive production that helps manage running costs during quieter periods
• Generous bin capacity that supports service continuity without constant monitoring

Installation requires a dedicated water supply, a suitable drain, and an appropriate electrical connection — exact requirements should be confirmed against the manufacturer's technical documentation prior to fitting. The unit is a modular design, meaning the ice head sits atop the storage bin, so ceiling height and access routes should be checked before delivery. The combined assembly is substantial in both height and depth, and a qualified engineer should carry out installation. It is also important to note that limescale will affect ice quality and can cause lasting damage to internal components over time — fitting an appropriate water filter is strongly advisable and, in hard water areas, effectively essential to protect the machine and maintain warranty coverage.

This machine is well suited to hotels, bars, restaurants, and event catering operations where ice demand is consistently high and supply interruptions would directly affect service. For smaller operations where daily ice requirements are more modest, a lower-output machine may be a more cost-effective fit. Equally, very large venues or central production kitchens with significantly higher demand may benefit from a heavier-duty model.

If you are unsure whether the iT0320 is correctly sized for your operation, or if you have questions about water filtration, installation, or how it fits alongside your existing equipment, our team is happy to talk it through with you before you commit.

The Manitowoc Indigo NXT iT0300 is a modular ice machine designed to meet the sustained demand of busy commercial kitchens, bars, food retail operations, and similar high-throughput environments. It produces half dice ice — a format widely used across catering and beverage service — and is paired here with the D400 storage bin, giving operators immediate, hygienic access to a substantial ice reserve throughout service.

In practice, the iT0300 is engineered to maintain reliable output even when ambient kitchen temperatures climb. This matters in real service conditions, where plantroom and production areas regularly run warm, and where ice demand peaks at precisely the moments ambient temperatures are highest. The machine's onboard diagnostics actively monitor the ice-making cycle and adjust the process to protect output consistency, which reduces the risk of ice shortfall during critical service periods.

From an operational standpoint, the combination of a high daily production rate and a large storage buffer means front-of-house and kitchen teams are drawing from a meaningful reserve rather than relying solely on real-time production. Key practical advantages include:

• Automatic demand-responsive operation helps manage energy use when service is quiet
• Half dice format is well suited to both blended drinks and food display applications
• The D400 bin offers straightforward, hygienic access without complex dispensing mechanisms
• Diagnostic programming allows faster identification of performance issues before they affect service

Installation requires a stable water supply, a drain connection, and an appropriate electrical supply — confirm your electrical specification with an installer before purchase. Water quality is a practical concern with any ice machine: limescale accumulation is one of the most common causes of reduced output and premature component wear. A suitable inline water filter is strongly advisable and should be factored into the installation plan from the outset.

The iT0300 is well suited to hotel kitchens, licensed premises, busy restaurant operations, and food retail counters with consistent daily ice requirements. It is a modular unit, meaning it sits atop the D400 bin rather than being a self-contained undercounter machine — allow adequate overhead clearance and front access for servicing. For smaller sites with more modest demand, a lower-output model in the Indigo NXT range would be more appropriate. For very high-volume or multi-point operations, heavier-duty configurations are available.

If you're working out whether this unit's output and storage capacity matches your site's actual demand pattern, our team is happy to talk it through before you commit.

The Manitowoc CNP0200A is a countertop nugget ice maker and dispenser, producing up to 88kg of nugget ice every 24 hours with a built-in 5kg storage bin and a push-button or lever dispense mechanism. Nugget ice — sometimes called pellet or chewable ice — has a soft, compressible texture and a high surface area, making it well suited to blended drinks, fountain beverages, and patient hydration applications, as well as general bar and hospitality use.

In a working service environment, the CNP0200A is designed to keep pace with steady demand rather than act as a bulk production unit. The 5kg storage capacity is modest, which means this machine performs best in settings where ice is drawn off regularly throughout the day rather than stockpiled ahead of a single service rush. The nugget format dispenses cleanly and consistently, reducing the handling and contamination risk associated with scooping from open bins — a practical advantage in both staffed and self-service settings.

From an operational standpoint, the key advantages of this unit include:

• Hygienic touch-free or lever dispensing reduces cross-contamination risk
• Nugget ice format cools drinks efficiently while remaining soft and easy to chew
• Countertop footprint suits bars, beverage stations, and buffet areas with limited floor space
• Stainless steel construction is durable and straightforward to keep clean
• On-demand production means ice is consistently fresh rather than sitting in storage

The CNP0200A requires a mains water connection and drainage, and like all ice machines it will need adequate ambient ventilation to maintain production efficiency — output will reduce in poorly ventilated or high-temperature environments. The unit sits at 871mm high, so counter clearance and proximity to a water supply are practical considerations before installation. At 61kg, it is manageable to position but not something to relocate frequently once plumbed in.

This machine is well suited to cafés, hotel beverage stations, healthcare settings, and bars where nugget ice is specifically required and throughput is steady rather than extremely high volume. It is not designed to be the sole ice source for a large licensed venue running multiple busy bars simultaneously — for those applications, a higher-capacity production unit would be a more appropriate starting point.

If you are unsure whether the output and storage capacity of this model suits your particular service pattern, our team is happy to talk through the options with you before you commit.

The Manitowoc UNP0300A is a self-contained nugget ice machine producing up to 142kg of ice per 24-hour period, with an integrated 27kg storage bin. Nugget ice — sometimes called pellet or chewable ice — is a small, compacted format with a soft texture and high water content. It cools quickly, dispenses easily, and is widely used in healthcare, blended drinks, salad bars, and high-throughput cold beverage service.

In a busy service environment, consistent ice availability is non-negotiable. The UNP0300A is built to run continuously through peak periods, and the integrated storage bin means there is a usable reserve on hand even during the highest-demand windows. The nugget format performs well in blended drink programmes and is gentle enough for healthcare applications where patients may be consuming ice directly.

From an operational standpoint, the key advantages of this machine are:

• Consistent nugget output well suited to blended beverages, healthcare, and soft drink service
• Integrated storage reduces the need for a separate bin and simplifies installation footprint
• Stainless steel construction supports hygiene standards and withstands the demands of a commercial environment
• Nugget ice has high dispensability, reducing service time at self-serve stations and bars
• Continuous production cycle maintains supply without manual intervention during service

Installation requires a mains water supply, a suitable drain connection, and an appropriate electrical supply — confirm your available services before ordering. At 90kg the unit is substantial, and the footprint of 738mm wide should be accounted for in your equipment layout. Adequate ventilation clearance around the unit is important for reliable performance, particularly in warmer kitchen environments. This is an air-cooled machine, so placement in a hot or poorly ventilated back-of-house area can affect output — factor this in when planning positioning.

The UNP0300A is best suited to mid-to-large venues with a sustained daily demand for nugget ice: busy bars, care homes, hospital catering departments, and high-volume fast-casual or blended drink operations. For sites with modest requirements, a lower-output machine may represent better value, while very large operations processing significantly more than 142kg per day may benefit from a higher-capacity alternative.

If you are unsure whether this output level matches your site's demand profile, or have questions about water and drainage requirements, our team is happy to talk it through before you commit.

The Manitowoc UNP0200A is a self-contained nugget ice machine producing up to 90kg of ice per 24-hour period, with an integrated 14kg storage bin. Nugget ice — sometimes called pellet or chewable ice — is characterised by its soft, compressible texture and high water-to-ice ratio, making it practical for a wide range of applications including blended drinks, patient hydration in healthcare settings, and high-throughput bar service.

In busy commercial environments, the ability to produce nugget ice continuously through a service period is a genuine operational advantage. The format cools drinks quickly and is easy to dispense at volume, which matters when bar staff or catering teams are working under pressure. The machine is designed for consistent output through extended daily use, and the stainless steel construction holds up well in the wet, demanding conditions typical of a commercial kitchen or bar back-of-house.

From a practical standpoint, the key operational benefits include:

• Soft nugget format reduces wear on blender equipment and glassware
• High dispensability keeps service moving during peak periods
• Integrated storage bin means ice is available immediately without a separate unit
• Stainless steel exterior is straightforward to wipe down and maintain hygienically
• Compact footprint relative to output suits sites where space is at a premium

Installation requires a mains water connection, a drain, and an appropriate electrical supply — confirm requirements with a qualified installer before ordering. The unit is designed for indoor use in a reasonably ventilated space; ambient temperature and ventilation will affect daily output, so installations in hot or poorly ventilated areas should be assessed carefully. At 59kg, positioning will require more than one person and consideration of floor loading in older buildings.

The UNP0200A is well suited to mid-sized bars, casual dining restaurants, healthcare facilities, and catering operations where nugget ice is a core requirement rather than an occasional need. For sites with significantly higher daily ice demand, a larger-capacity machine would be worth considering. Conversely, smaller operations with modest ice requirements may find a lower-output model more cost-effective to run.

If you're unsure whether this output level is the right fit for your service volume or site conditions, the team is happy to talk it through before you commit to a purchase.

The Manitowoc UFP0399A is a self-contained flake ice machine designed for commercial sites with a consistent, high-volume demand for flake ice. It produces up to 175kg of ice per 24-hour period and holds up to 55kg in its integrated storage bin, meaning there is always a usable reserve available even during busy service periods. The unit is constructed in stainless steel and built to the standard expected of Manitowoc's commercial ice range.

Flake ice has a relatively soft, irregular texture that makes it well suited to food presentation, particularly fish and seafood displays, fresh produce counters, and buffet or salad bar applications. It moulds easily around product, maintains consistent surface contact, and melts at a controlled rate — characteristics that make it a practical choice wherever food safety and presentation both matter. It is also commonly used in healthcare and laboratory environments where gentle, pliable ice is required.

In a busy service environment, the UFP0399A's production rate means it can comfortably keep pace with sustained demand without operators needing to ration usage or plan around ice availability. Key operational advantages include:

• Continuous production cycle keeps storage replenished throughout the day
• 55kg bin provides a meaningful buffer during peak demand
• Stainless steel construction supports straightforward cleaning and long-term hygiene compliance
• Flake format reduces the risk of product bruising or damage in display applications
• Compact footprint relative to output, useful where floor space is limited

Installation requires a mains water connection, a suitable drain, and an appropriate electrical supply. The unit weighs 94kg and stands at 1172mm high with a 738mm width, so access routes and final positioning should be considered before delivery. It is designed for indoor installation and will perform best in a well-ventilated space — ambient temperature extremes can affect output in any ice machine, and this is worth bearing in mind when identifying a suitable location.

The UFP0399A is well suited to fishmongers, fish and chip restaurants, hotel buffets, food service operations with prominent display counters, and any site where flake ice is a daily operational requirement rather than an occasional need. For smaller sites with more modest demand, a lower-output machine may be more appropriate and more economical to run. Equally, sites with very high-volume requirements or multiple points of use may find a higher-capacity model better matched to their needs.

If you are unsure whether this output level matches your site's usage pattern, or have questions about installation requirements, we are happy to talk it through before you commit to a purchase.

The Manitowoc UFP0388A is a self-contained flake ice machine designed for commercial sites that require a consistent, high-volume supply of flake ice throughout the working day. Flake ice is soft, pliable, and moulds closely around produce and products, making it the preferred choice for fish and seafood display, chilled food presentation, food preparation chilling, and certain medical or veterinary environments where a gentle, high-contact ice form is required.

In busy service conditions, the UFP0388A performs reliably across extended operating periods. With a daily output capable of meeting the demands of a busy fishmonger, hotel buffet display, or large catering operation, it provides a steady supply without the stop-start recovery issues that smaller machines can suffer during peak periods. The 40kg storage bin means there is always a working reserve on hand, reducing the risk of running short during busy service windows.

From an operational standpoint, flake ice machines of this class offer several practical advantages over cube or bullet ice machines in display and chilling applications:

• Flake ice conforms to product shapes, improving coverage and chilling contact
• Consistent output supports planned service without manual restocking pressure
• Stainless steel construction holds up well in humid kitchen and prep environments
• Straightforward cleaning and maintenance routines reduce downtime
• Suitable for integration into existing countertop or prep area workflows

Installation requires a mains water connection, a suitable drain, and an electrical supply — the exact requirements should be confirmed before installation. The machine carries a footprint suited to back-of-house or prep areas rather than front-of-house placement, and at 85kg it will need appropriate handling during positioning. Ventilation clearances should be observed to maintain efficient operation, particularly in warmer kitchen environments.

This model is well suited to medium-to-large catering operations, food retail sites, hotels, and healthcare or catering facilities with a consistent daily demand for flake ice. Sites with lighter, intermittent requirements may find a lower-output model more cost-effective to run, while operations with significantly higher throughput needs may benefit from a heavier-duty unit.

If you are unsure whether this output level matches your daily demand, or if you have questions about installation requirements specific to your site, our team is happy to talk it through with you.

The Manitowoc NEO 80 is a self-contained undercounter ice machine designed to produce and store ice at the point of use. With an output of 46kg per 24 hours and a built-in storage capacity of 14kg, it is intended for sites that need a consistent, accessible supply of ice without dedicating significant floor or counter space to the task.

In a working bar or compact kitchen environment, having ice produced and stored directly beneath the counter removes the need for manual transfers from a separate ice store. The NEO 80 is suited to moderate-volume service — a busy café bar, hotel service station, or restaurant bar where ice demand is steady rather than intense. It handles the rhythm of everyday service well, provided output expectations are realistic for a machine in this class.

The practical advantages of this unit in a tight space are straightforward:

• Undercounter footprint keeps worksurfaces clear and ice within arm's reach
• Integrated storage bin means no separate ice caddy or remote bin required
• Stainless steel construction holds up to the cleaning demands of a commercial environment
• Self-contained design simplifies installation compared to modular head-and-bin configurations
• User-accessible controls reduce the need for engineer visits for routine adjustments

Installation requires a cold water supply, a drain connection, and an appropriate electrical supply — all standard requirements for an undercounter ice machine. Ventilation clearance should be factored in, as the unit requires adequate airflow to operate efficiently and maintain output in warmer ambient conditions such as a busy bar area in summer. The 790mm height fits beneath a standard counter, but confirm your counter clearance before ordering, particularly if a worktop or till system is already fixed in place.

This machine is well suited to smaller licensed premises, hotel bars, cafés, and light-use restaurant stations where ice volume demands are moderate. Sites running high-volume cocktail bars, large events catering, or extended split-shift service may find the output limiting during peak periods — for those environments, a higher-capacity machine would be worth considering.

If you are unsure whether the NEO 80 will keep pace with your service, our team is happy to talk through your typical covers and ice usage before you commit to anything.

The Manitowoc D970 is a high-capacity ice storage bin designed to work alongside Manitowoc ice machines, providing a reliable buffer of ready-to-use ice between production and service. Built from stainless steel, it is intended for demanding commercial environments where consistent ice availability matters — bars, hotels, high-volume food service operations, and similar settings where running short is not an option.

At 322kg storage capacity, the D970 suits operations that experience sustained or unpredictable demand throughout a shift. The insulated construction slows melt rate without requiring a separate power connection, which keeps running costs low and installation straightforward. The door design allows one-handed access, a practical detail that matters in a busy service environment where staff are often carrying glasses or containers simultaneously.

Key operational advantages include:

• Large storage reserve reduces the risk of running short during peak service
• Insulated construction maintains ice longer without additional power draw
• Stainless steel surfaces support thorough cleaning and good hygiene standards
• One-handed door access supports efficient workflow behind the bar or in service areas
• Compatible with a range of Manitowoc ice machine models, including the FU246, FU247, FU248, and FU249

Installation is relatively straightforward — the bin requires no electrical or water connection in its own right, though it must be correctly paired with a compatible Manitowoc ice machine above it. At 99kg, siting and positioning will require appropriate handling equipment and potentially more than one person. The footprint is substantial, so confirming available floor space before ordering is worthwhile. It is also worth ensuring the floor loading in your chosen location is suitable for the combined weight of the bin and a full ice load.

The D970 is well suited to mid-to-large operations with consistent ice demand — busy bar environments, catering functions, or hotel operations where ice must be available on demand throughout a long service period. Smaller sites with lower throughput requirements may find a reduced-capacity bin more appropriate, while very high-volume operations running multiple machines may wish to consider whether a larger storage solution better matches their output.

If you are unsure which storage bin pairs correctly with your existing or planned ice machine, or want to talk through the right capacity for your site, we are happy to help you work through it before you commit.

The Manitowoc D570 is a large-capacity ice storage bin designed to work alongside compatible Manitowoc ice machines. Its role is straightforward: to hold a substantial reserve of freshly made ice and keep it in good condition until it is needed for service. The bin does not produce ice itself — it is a holding and dispensing unit that sits beneath or alongside the ice machine as part of a complete ice station.

In busy commercial environments, the ability to carry a significant ice reserve matters considerably. High-footfall bars, hotel beverage stations, and busy kitchen pass areas all experience periods of concentrated demand where draw-off rates can quickly outpace machine production. A bin of this capacity helps to buffer that gap, meaning service continues without interruption even during peak periods. The insulated construction slows ice melt without requiring a separate power connection, which keeps running costs low and installation straightforward.

Practical advantages of the D570 for day-to-day operation include:

• Insulated door and lining reduces melt rate, preserving ice through quieter periods
• One-handed door operation makes access practical during busy service
• Stainless steel construction supports thorough cleaning and meets commercial hygiene standards
• No electrical connection required for the bin itself, simplifying installation
• Compatible with a defined range of Manitowoc ice machine models, ensuring correct fit and drainage alignment

The bin requires no power supply of its own, but correct installation alongside the ice machine is important — drainage, levelling, and adequate clearance for the machine mounted above all need to be considered at the planning stage. At 67kg the unit has a solid, commercial-grade build and will need appropriate positioning before the ice machine is installed on top. It is worth confirming compatibility with your specific Manitowoc machine model before ordering.

The D570 is well suited to high-volume bars, hotels, catering operations, and any site where consistent ice availability is critical to service. For sites with more modest requirements, smaller-capacity bins are available. Equally, very high-volume operations running multiple ice machines may benefit from reviewing larger bin options.

If you are unsure which bin capacity or machine pairing suits your site, our team is happy to talk through your requirements before you commit to an order.

The Manitowoc D420 is a dedicated ice storage bin designed to work alongside Manitowoc ice machines, providing a hygienic and well-insulated holding point between production and service. It is a passive unit — no power connection is required — and its role is straightforward: to keep a substantial volume of freshly made ice in good condition until it is needed.

In a busy bar or high-footfall food service environment, ice demand can outpace machine output during peak periods. A bin of this capacity acts as a buffer, allowing the ice machine to run consistently and accumulate stock ahead of service. The insulated construction and lined interior help maintain ice in a usable state for extended periods, reducing waste and keeping pace with demand through a busy shift.

The stainless steel build is well suited to the demands of a commercial environment — straightforward to clean, resistant to the moisture and temperature changes inherent in ice storage, and durable enough for daily use over a long service life. The door design allows one-handed access, which is a practical consideration in a working bar where staff are often carrying glasses or bottles at the same time.

• Generous storage capacity helps sustain ice supply through peak service periods
• No power requirement keeps installation and running costs simple
• Insulated door and lining slow melt rate and reduce waste
• One-handed door operation supports efficient bar workflow
• Stainless steel construction is easy to clean and built for daily use

Installation is uncomplicated given the absence of any electrical or water connection — positioning is the primary consideration, along with ensuring adequate drainage beneath the unit for meltwater. At 61kg the bin is substantial, so placement should be planned before the unit is filled. It is designed to pair with compatible Manitowoc ice machines, and it is worth confirming compatibility with your specific machine model before ordering.

The D420 is best suited to mid-to-large bars, pub operations, and busy catering kitchens where a reliable ice reserve is needed throughout service. For smaller operations with lower ice throughput, a reduced-capacity bin may be more appropriate. For very high-volume venues — large events spaces or hotel operations with multiple service points — a higher-capacity solution may be worth considering.

If you would like to talk through how this bin fits with your existing or planned ice machine setup, our team is happy to help you work through the options before you commit.

The Manitowoc D400 is a standalone ice storage bin designed to pair with compatible Manitowoc ice machines. Its purpose is straightforward: to provide a hygienic, well-insulated holding vessel between the ice machine's output and the point of service. With a 131kg storage capacity and stainless steel construction throughout, it is built for the demands of commercial bar and kitchen environments where consistent ice availability matters.

In a busy service environment, the gap between ice production rate and peak demand can cause real operational problems. A bin of this capacity provides meaningful buffer stock — particularly useful in bars, hotel operations, or catering setups where ice usage spikes sharply during service periods. Because the bin requires no separate power connection, it relies on insulation rather than active refrigeration to maintain ice quality, which is worth considering when planning placement. Positioning in a cool, shaded area will help extend hold times.

The practical benefits of the D400 in day-to-day use include:

• Single-hand door access, keeping workflow moving during busy service
• Insulated door and lining that slows melt rate without electrical running costs
• Stainless steel interior that is straightforward to clean and maintain hygienically
• No power connection required, simplifying installation logistics
• Robust construction suited to regular commercial use

Installation is relatively uncomplicated — there is no electrical or water connection required for the bin itself, though its companion ice machine will have its own utility requirements. At 55kg the unit has a reasonable footprint and should be assessed against your available floor space and the clearance needed for the ice machine mounted above. Confirm compatibility with your ice machine model before ordering.

The D400 is well suited to mid-to-large volume operations — bars, restaurants, hotels, and catering kitchens where ice demand is consistent and a sizeable reserve is needed. Smaller operations with modest ice requirements may find a lower-capacity bin more appropriate, while very high-volume sites producing ice continuously may benefit from a larger storage option.

If you are unsure whether the D400 suits your service volumes or existing ice machine setup, our team is happy to talk it through with you before you commit to a purchase.

The Manitowoc D320 is a free-standing ice storage bin designed to work alongside Manitowoc ice machines, providing a dedicated, hygienic holding point between ice production and service. Constructed from stainless steel, the bin holds up to 95kg of ice at a time, making it a practical choice for high-throughput sites where ice demand is consistent throughout service.

In busy environments — bars, hotel operations, high-volume catering kitchens — ice stock can deplete quickly during peak periods. The D320 is designed to keep pace with that demand by maintaining a substantial reserve. Its insulated door and advanced interior lining slow the natural melt rate considerably, meaning ice made during quieter periods remains usable later in service without any additional power connection required for storage.

From an operational standpoint, the bin offers several practical advantages:

• Stainless steel construction resists corrosion and is straightforward to clean to food hygiene standards
• Single-handed door operation keeps service moving when staff are occupied
• Passive insulation preserves ice quality without adding to energy consumption
• Robust build handles the demands of continuous commercial use
• Compatible with Manitowoc ice machines including the FU243 and FU244

Installation is relatively straightforward — the bin requires no electrical or water connection of its own, as it functions purely as a storage vessel. It does, however, need to be positioned to accept ice directly from a compatible Manitowoc machine mounted above, so ceiling height and the combined footprint of machine and bin should be confirmed before ordering. At 50kg, siting and manoeuvring the unit into a fixed position will typically require two people.

The D320 suits bars, pubs, restaurants, and catering kitchens where a single Manitowoc ice machine is the primary production source. For operations with multiple machines or considerably higher ice volume requirements, a larger-capacity bin may be more appropriate. If you are unsure whether the D320 is the right fit for your setup, we are happy to talk it through before you commit to an order.

The Manitowoc Indigo NXT iT1900 is a modular, high-capacity dice ice maker designed for commercial operations where reliable, continuous ice production is critical. It produces dice-format ice — a versatile, all-purpose cube commonly used in beverages, food display, and food preservation — and is built to operate as a head unit sitting above a compatible storage bin.

At this output level, the iT1900 is firmly in high-volume territory, suited to sites where ice demand runs consistently throughout the day and into the evening. The machine is engineered to maintain production even when ambient temperatures are elevated, which is a meaningful practical advantage in busy kitchen or back-bar environments where heat from other equipment can raise the surrounding air temperature significantly. Recovery between cycles remains stable under sustained demand, which matters in peak service when ice consumption is at its highest.

The Indigo NXT control platform goes beyond basic on/off operation. It actively monitors the ice-making process, adjusting for changing conditions and flagging issues before they become failures. For a site that depends heavily on ice — a large hotel bar, a busy restaurant, a stadium kiosk — that kind of operational intelligence reduces the risk of unplanned downtime. Key practical advantages include:

• Intelligent diagnostics that help prevent breakdowns and optimise cycle efficiency
• Demand-led output scaling to reduce energy use during quieter periods
• Stable production at elevated ambient temperatures, important in hot kitchen environments
• Stainless steel construction throughout, supporting hygiene and long-term durability
• Modular design allowing pairing with appropriately sized storage bins

As a modular unit, the iT1900 requires a separate ice storage bin — this is not a self-contained machine. Installation requires consideration of water supply, drainage, and adequate ventilation around the unit. Water quality is a significant factor with ice machines of any brand; limescale build-up is one of the most common causes of reduced performance and premature component wear. Fitting an appropriate inline water filter before installation is strongly advisable, particularly in hard-water areas. At 144kg, the unit is substantial, and access routes and floor loading should be checked before delivery.

The iT1900 is best suited to large-scale hospitality venues, central production kitchens, busy bars and restaurants, or food retail environments with sustained high ice demand. It is a significant piece of capital equipment and represents a long-term operational investment — the kind of purchase where getting the specification right first time is important. For smaller sites, lower-output alternatives in the Indigo NXT range may be more appropriate; for very large or multi-point operations, it is worth discussing whether a single unit or multiple smaller units better suits the workflow.

If you are unsure whether this output level is the right match for your operation, or have questions about bin compatibility, water filtration, or installation requirements, the team at Advantage is happy to talk it through with you before you commit.

The Manitowoc Indigo NXT iT1500 is a modular dice ice maker built for sites where ice demand is consistently high and reliability is non-negotiable. Producing up to 782kg of dice ice per 24-hour period, it sits at the upper end of the Indigo NXT range and is designed to run continuously through busy service periods without requiring manual intervention. Dice ice is a versatile, fast-melting format widely used in drinks service, food display, and food preparation — making this machine a practical choice across a broad range of commercial settings.

In operational terms, the iT1500 is engineered to maintain output even when ambient temperatures climb, which matters in warm kitchen or back-of-house environments where lesser machines lose capacity during summer months. The onboard diagnostics actively monitor the ice-making cycle and flag issues early, giving operators and engineers useful information before a minor fault becomes a service disruption. The machine can also reduce output during low-demand periods, which has a meaningful effect on energy consumption over a full year of operation.

From a practical standpoint, the key advantages for busy operations include:

• High sustained output that supports continuous drinks service without ice shortages
• Ambient temperature tolerance that maintains production in warm back-of-house conditions
• Intelligent diagnostics that reduce unplanned downtime and simplify servicing
• Demand-responsive operation that avoids unnecessary energy use during quieter periods
• Stainless steel construction suited to the hygiene requirements of commercial food environments

The iT1500 is a modular unit, meaning it requires a separate ice storage bin — this should be factored into your planning before purchase. Water supply, drain, and electrical connections all need to be in place prior to installation, and water quality is a genuine operational consideration at this output level: limescale accumulation can reduce efficiency and cause damage over time, so a suitable water filtration system is strongly recommended as part of the installation. The unit's footprint and weight of 132kg mean access routes and floor loading should be assessed in advance, particularly in basement or upper-floor plant rooms.

This machine is best suited to high-volume operations — large hotels, busy bars, event venues, hospital catering facilities, or high-throughput food service sites — where ice demand is consistent and a shortfall in supply would have a direct impact on service. For smaller sites with more modest requirements, a lower-output model from the same range would be a more proportionate choice. Equally, if you operate multiple high-demand outlets from a single production point, it is worth discussing whether a single large unit or multiple smaller machines better suits your workflow.

Given the investment involved and the installation requirements, it is worth having a conversation with us before you order — we are happy to talk through output requirements, water filtration options, and bin pairing to make sure you are specifying the right setup from the outset.

The Manitowoc Indigo NXT iT1200 is a modular dice ice maker designed for operations where consistent, high-volume ice production is a daily requirement. Producing up to 524kg of dice ice per 24 hours, it sits at the heavy-duty end of the Indigo NXT range and is built to run continuously in demanding environments. As a modular unit, it requires a separate ice storage bin, which allows operators to configure total holding capacity to match their service pattern.

In practice, the iT1200 is well suited to environments where ice demand is both high and sustained — large hotel bars, stadium catering, food production, or central-supply ice rooms serving multiple outlets. The machine is engineered to maintain output in ambient temperatures up to 43°C, which is a meaningful consideration for kitchen and back-of-house environments that can run hot during service. Onboard diagnostics monitor the ice-making cycle and flag issues early, which reduces the risk of unplanned downtime during a busy period.

From an operational standpoint, the key advantages are:

• Sustained high output across long service windows without significant recovery lag
• Intelligent demand management that moderates production when storage is near capacity, reducing energy use during quieter periods
• Dice ice format, which is widely used across bar service, soft drinks, and some food applications
• Diagnostics that support planned maintenance rather than reactive repair
• Stainless steel construction suited to commercial hygiene standards

Installation requires a mains water supply, a drain connection, and adequate electrical supply — confirm your site's provision against the machine's requirements before ordering. As a modular head unit, the iT1200 must be paired with a compatible Manitowoc storage bin; the two units need to be specified together to ensure correct fitment and combined capacity. Weight of 105kg means installation will require two people and appropriate access. Water quality is a significant factor with any ice machine: limescale build-up can impair ice quality and cause long-term damage to components, so a suitable water filtration system should be considered as part of the installation rather than an afterthought.

This machine is best suited to high-volume operators who need reliable, continuous ice production as a core part of their service infrastructure — large venues, busy hotel food and beverage operations, or catering facilities supplying ice to multiple points of use. For smaller operations, a lower-capacity model from the Indigo NXT range will likely be more appropriate and more economical to run. For sites with genuinely extreme demand or where multiple bin configurations are needed, it is worth discussing the full range before committing.

If you are unsure whether the iT1200 is the right match for your volume and setup, our team is happy to work through the details with you before you place an order.

The Manitowoc Indigo NXT iT0900 is a high-output modular ice maker producing dice-format ice at up to 381kg per 24 hours. It is a head unit designed to sit on top of a separate ice storage bin, making it a flexible choice where large quantities of ice are needed consistently throughout the day. Dice ice is a widely used format across bars, food service counters, blended drink stations, and healthcare catering, offering good displacement in glassware and a clean, clear appearance in finished drinks.

In busy operational environments, the iT0900 is built to keep pace with sustained demand. The machine is rated to continue producing ice at ambient temperatures up to 43°C, which is a meaningful advantage in kitchen or back-of-house environments where heat from cooking equipment can make ambient conditions difficult for refrigeration-based kit. The onboard diagnostics actively monitor the ice-making process and can adjust output to maintain efficiency — a useful feature in operations where demand fluctuates between service periods and quieter periods.

From an operational standpoint, the key practical advantages include:

• High daily output supports continuous service across multiple outlets or counters
• Advanced diagnostics reduce the likelihood of undetected faults affecting production
• Automatic output adjustment helps manage energy use during periods of lower demand
• Stainless steel construction supports hygiene standards and withstands daily cleaning routines
• Modular format allows pairing with different bin sizes to suit available floor space

The iT0900 is a modular head unit only — a compatible storage bin is required separately and must be specified to suit the installation footprint and the volume of ice you need to hold in reserve. The unit requires a mains water supply, a drain, and an appropriate electrical supply. Water quality is an important practical consideration: limescale is one of the most common causes of premature wear and reduced output in ice machines, and fitting a water filter appropriate to your local water hardness is strongly recommended before installation. Regular descaling and preventative maintenance will also protect the compressor and evaporator over the long term.

This machine is best suited to high-volume operations — large hotels, busy bars, food production units, or multi-outlet catering sites where ice demand is both heavy and continuous. For smaller operations or those with more modest daily requirements, a lower-output model is likely to be a more cost-effective and practical fit. For sites with demand that goes beyond even this machine's capacity, larger-output alternatives are available in the range.

If you're working through the right output level, bin configuration, or water treatment approach for your site, the team is happy to talk it through before you commit to an order.