Santos

The Santos T6 is a 6mm slicing disc designed specifically for use with Santos vegetable slicers. It produces uniform tomato slices at a consistent thickness, which helps maintain portion control and presentation standards across a busy service.

In a working kitchen environment, consistent slicing matters more than it might seem. Uneven tomato slices create waste, affect plating, and slow down assembly lines during peak periods. A dedicated tomato disc cuts cleanly through the skin without compression or tearing, which is something general-purpose slicing discs often struggle with at this thickness.

• Produces consistent 6mm slices suited to sandwich, salad, and plated dish applications
• Designed to cut cleanly through tomato skin without crushing
• Reduces preparation time compared to manual slicing at volume
• Supports portion consistency across multiple covers
• Compatible with Santos vegetable slicer range

As an accessory disc, there are no installation requirements beyond confirming compatibility with your existing Santos slicer model. It is worth checking your machine's disc fitting before ordering, as Santos produces several slicer models and disc compatibility can vary across the range.

This disc is well suited to kitchens preparing salads, sandwiches, or sharing platters at volume — cafés, delis, pub kitchens, and contract catering operations are typical users. For sites processing a wider variety of vegetables, Santos offers a broader range of discs that can extend the versatility of the same machine.

If you are unsure whether this disc is compatible with your current Santos slicer, or want to discuss which disc combination suits your prep requirements, we are happy to help you work it out before you order.

The Santos T6 slicing disc is a replacement and auxiliary cutting disc designed for use with Santos vegetable slicers. The 6mm cut produces uniform slices suitable for a wide range of vegetables and soft produce, making it a practical addition to any kitchen that relies on consistent, repeatable prep work.

In a busy prep kitchen, uniform slice thickness matters. A consistent 6mm cut reduces cook time variation, improves plate presentation, and keeps mise en place predictable across service periods. Whether you're slicing courgettes, cucumbers, beetroot, or similar produce, the disc delivers reliable results without requiring adjustment between uses.

• Produces consistent 6mm slices across a variety of vegetables and soft produce
• Designed as a direct fit for compatible Santos vegetable slicers
• Supports faster, more uniform prep compared to hand slicing
• Straightforward to swap between disc types when changing prep tasks
• Robust disc construction suited to regular commercial kitchen use

This disc is an accessory item and requires a compatible Santos vegetable slicer to function. It is worth confirming compatibility with your specific Santos machine model before ordering, as disc fitment can vary across the Santos range.

The 6mm disc is well suited to kitchens with moderate to high vegetable prep volumes. Operations needing a finer or thicker cut should consider the alternative disc sizes available within the Santos T6 range to match their menu requirements.

If you're unsure which disc size suits your prep needs, or want to confirm compatibility with your existing Santos machine, we're happy to help you work that out before you order.

This is the complete replacement basket with 0.5mm holes, designed for use with Santos high-output commercial juice extractors. The basket is the core filtration component of the extractor, responsible for separating juice from pulp during the extraction process. The 0.5mm hole size produces a finer, cleaner juice with less pulp carry-through, which is the preferred output for most front-of-house juice service.

In a busy kitchen or juice bar environment, baskets are consumable components — they wear, clog, and can distort under heavy continuous use. Keeping a spare on hand is standard practice for any site running juice service through a peak period, as swapping a basket mid-service is far quicker than attempting to clean one under pressure. The 0.5mm specification suits operators who prioritise juice clarity over yield speed.

A few points worth considering before ordering:

• The 0.5mm hole size gives a cleaner, finer juice — for higher pulp content or faster throughput, a basket with larger holes may suit better
• Baskets should be inspected regularly and replaced when holes show signs of distortion or blockage that cleaning cannot resolve
• This basket is intended for specific Santos extractor models — confirm compatibility with your machine before ordering

This basket is best suited to operators already running a compatible Santos juice extractor who need a direct replacement or a rotation spare. If you are unsure which basket specification is correct for your machine, or whether this hole size is the right choice for your juice programme, it is worth getting in touch with the team before ordering.

The Santos R3 is a 3mm grating disc designed for use with Santos vegetable slicers. It attaches to compatible Santos machines and produces a fine grate suitable for a range of ingredients commonly processed in commercial kitchens, including hard cheeses, carrots, courgettes, and similar produce.

In a busy kitchen environment, having the right disc for the job makes a practical difference. A 3mm grate is fine enough for garnishes, salad components, or incorporated ingredients where a coarser cut would affect texture or presentation. Swapping discs between prep runs is straightforward, which keeps multi-task prep stations moving without unnecessary downtime.

• Fine 3mm grating suitable for cheese, root vegetables, and similar produce
• Designed to fit compatible Santos vegetable slicer models
• Supports consistent cut size across high-volume prep runs
• Quick disc changeover helps maintain prep workflow
• Genuine Santos accessory ensuring correct fit and safe operation

As an accessory, there are no installation requirements beyond confirming compatibility with your existing Santos machine. It is worth verifying your slicer model before ordering, as Santos produces several machines and not all discs are interchangeable across the range. If you are unsure which disc fits your machine, or whether a different cut size would better suit your menu, the team is happy to help you confirm the right choice.

The Santos E8 is a shredding disc designed specifically for use with the Santos No.48 vegetable slicer. It fits directly into the machine and produces consistent shredded cuts suitable for a range of salad, garnish, and prep applications in a commercial kitchen environment.

Replacement and supplementary discs like this are a practical part of keeping a vegetable slicer versatile. Rather than running a single cut profile through an entire prep session, operators can swap discs to match the task at hand — moving between slicing, grating, and shredding without changing machines. The E8 shredding profile is commonly used for coleslaw-style cuts, shredded root vegetables, and similar preparations where uniformity across a batch matters.

A few practical points worth noting: this disc is compatible with the Santos No.48 only — it will not fit other Santos models or third-party machines. If you are unsure which Santos machine you have, checking the model number on the machine before ordering will save time. Disc condition does affect cut quality and operator safety, so worn or damaged discs should be replaced rather than continued in use.

This disc is well suited to any kitchen already running a Santos No.48 as part of their prep setup. If your volume has grown and you are finding a single machine is a bottleneck, it may be worth discussing whether your current slicer configuration still fits your throughput requirements.

If you are not certain whether this is the right disc for your machine or your prep application, we are happy to help you confirm before you order.

This is the replacement basket strainer for the Santos high-output juice extractor. The basket sits inside the extractor and is responsible for separating juice from pulp during the extraction process. The 0.5mm hole size is the standard configuration for this machine, producing a relatively smooth juice output suitable for most front-of-house service applications.

In a busy juice bar, hotel breakfast service, or café environment, the basket strainer is a wear item. With continuous use across service periods, residue and fine pulp particles gradually affect flow rate and output quality. Having a genuine replacement to hand means a machine is back in service quickly rather than waiting on a part, which is particularly relevant for operations where fresh juice is a core menu item.

From a practical standpoint, the benefits of keeping a spare are straightforward:

• Swap during service without extended downtime
• Clean the used basket thoroughly off-machine without rushing
• Maintain consistent juice quality and flow rate across the service period
• Extend the working life of the extractor by replacing consumable parts on schedule

The basket should be inspected regularly for distortion, blocked holes, or mesh damage. A clogged or deformed basket puts unnecessary strain on the motor and reduces yield, so routine replacement is a sensible part of general machine maintenance rather than a reactive measure.

This part is designed specifically for the Santos high-output juice extractor and may not be compatible with other Santos models. If you are unsure which basket size or configuration is correct for your machine, it is worth checking with us before ordering.

The Santos E2 is a shredding disc designed specifically for use with the Santos No.48 vegetable slicer. It fits directly onto the machine in place of other cutting discs, converting the slicer to produce shredded output — suitable for vegetables such as cabbage, carrots, and similar firm produce commonly prepared in volume in commercial kitchens.

In practice, interchangeable discs are what make a vegetable slicer a genuinely versatile piece of prep equipment. Rather than investing in multiple dedicated machines, operators can switch between slicing, grating, and shredding functions depending on service requirements. The E2 disc handles consistent, repeatable shredded cuts across continuous prep runs, which matters when you are producing coleslaw, garnishes, or bulk salad ingredients to a tight service schedule.

A few practical points worth noting: this disc is designed exclusively for the Santos No.48 — it will not fit other Santos models or third-party slicers. If you are unsure which model you have, it is worth confirming before ordering, as disc compatibility across the Santos range is model-specific. Santos accessories are generally well made and hold up well under regular commercial use, but like any cutting disc, the edge condition should be checked periodically and the disc replaced when shred quality deteriorates.

This disc suits any operation already running a Santos No.48 that needs to extend its prep repertoire. If your prep volumes are high enough to warrant a dedicated shredding machine rather than an accessory disc, that is a conversation worth having before you commit.

If you are not certain which disc your machine takes, or you are looking to build out a full set of accessories for your Santos slicer, feel free to get in touch — it is the sort of question we are happy to talk through.

This stainless steel knife is a replacement cutting component designed for use with Santos mincer units. It forms part of the cutting assembly that processes meat and other ingredients during mincing operations in a commercial kitchen environment.

If you are unsure whether this knife is compatible with your specific Santos mincer model, or if you need guidance on the correct replacement parts for your unit, it is worth speaking with the team before ordering to avoid a wasted purchase.

This is the complete replacement basket for Santos high-output juice extractors, fitted with 0.8mm filtration holes. The basket is the core filtration component in the extraction process — it separates juice from pulp as produce is pressed through the machine, and its hole size directly affects the clarity and texture of the finished juice.

The 0.8mm hole size produces a relatively fine filtration, which suits operators who want a cleaner juice with less pulp carry-through. In a busy juice bar or hotel breakfast service, this can make a meaningful difference to the consistency of the product served, particularly where freshly extracted citrus or vegetable juices are poured directly without further straining.

Replacement baskets are a routine part of maintaining a juice extractor in good working order. Over time and under heavy use, basket mesh can deform, clog, or sustain minor damage that affects both extraction efficiency and hygiene standards. Keeping a spare basket to hand allows for a quick swap during service without taking the machine offline.

• Maintains consistent filtration performance and juice clarity
• Allows rapid changeover during service if the primary basket requires cleaning
• Correct fit ensures the extractor operates as intended
• Fine 0.8mm mesh reduces pulp carry-through into finished juice

This basket is designed specifically for compatible Santos high-output juice extractors. If you are unsure whether this basket matches your existing machine, or if you are considering a different hole size for a specific juice type, the team is happy to advise before you order.

This chromed wire holding rack is a dedicated storage accessory for the Santos No.48 vegetable slicer. It provides a fixed, organised location for the interchangeable cutting discs that come with the machine, keeping them close to hand during preparation service and reducing the risk of discs being misplaced or damaged when not in use.

In a working kitchen, disc management is a small but genuine operational consideration. When a prep cook needs to switch between slicing thicknesses or cutting profiles at speed, having discs stored in an accessible, clearly visible rack alongside the machine makes changeovers quicker and reduces downtime. It also protects the cutting edges of the discs from contact damage that can occur when they are stored loosely in a drawer or container.

• Keeps all cutting discs organised and immediately accessible at the machine
• Chromed wire construction is easy to wipe down as part of routine cleaning
• Protects disc cutting edges from contact damage during storage
• Designed specifically to fit and work with the Santos No.48 veg slicer

This rack is intended solely for use with the Santos No.48 vegetable slicer (K308) and is not a universal accessory. If you are unsure whether it is compatible with your current Santos machine, or if you are building out a full disc set for a new installation, it is worth checking with us before ordering.

Replacement grinding discs compatible with the Santos pepper grinder. No further specification data is currently available to describe disc types, grind settings, materials, or service life. Please contact the team for guidance on the correct disc for your application.

This is a replacement grating disc designed for use with the Santos high output juicer. Grating discs are interchangeable cutting attachments that allow the machine to be used for grating tasks alongside its primary juicing function, extending the versatility of the unit without requiring additional equipment.

In a commercial kitchen, the ability to switch quickly between processing tasks matters. A well-maintained grating disc delivers consistent results across service periods and holds up to the throughput demands of a busy prep kitchen. Keeping a spare disc on hand is common practice in kitchens where the Santos machine is in regular daily use, as it allows one disc to be cleaned and inspected while the other remains in service.

A few practical points worth bearing in mind:

• Confirm compatibility with your specific Santos model before ordering
• Inspect the disc regularly for wear — a blunt or damaged disc affects output quality and can place unnecessary load on the motor
• Follow Santos cleaning guidelines to maintain hygiene and extend the working life of the disc

This disc is suited to kitchens already operating a Santos high output juicer and looking to replace a worn disc or hold a spare. If you are unsure which disc specification is correct for your machine, or whether a different attachment better suits your prep requirements, we are happy to help you confirm the right choice before you order.

The Santos Basket Base is a direct replacement component designed to fit the Santos No.50 centrifugal juicer. The basket base sits at the heart of the juicing mechanism, supporting the spinning basket during operation and ensuring the machine runs correctly and safely.

In a busy juice bar, café, or hotel breakfast service, the No.50 is a workhorse — and like any frequently used piece of equipment, its components are subject to wear over time. Having a genuine replacement basket base to hand means minimal disruption when the original shows signs of fatigue or damage. Running the juicer with a worn or damaged base risks compromising juice yield and can place unnecessary stress on the motor.

This is a straightforward like-for-like replacement rather than an upgrade or modification. It is worth checking the condition of the basket itself at the same time, as both components work together and replacing one while the other is worn may limit the benefit gained.

If you are unsure whether this is the correct part for your machine, or if your No.50 is showing other signs of wear, it is worth getting in touch before ordering — we can help confirm compatibility and advise on whether any other components should be replaced at the same time.

This is a set of three sausage cones designed specifically as accessories for Santos mincers. The cones attach to the mincer in place of the standard cutting plate and die, allowing the machine to be used for filling sausage casings rather than mincing. This converts an existing Santos mincer into a practical sausage-filling tool without the need for a separate dedicated machine.

In a working kitchen or butchery environment, having the right attachments to hand means operators can move between tasks efficiently. These cones allow the mincer to perform double duty during prep, which is useful in operations where bench space and equipment budgets are both limited.

• Three cones included, offering flexibility for different casing sizes
• Designed to fit Santos mincers — no improvised adapting required
• Straightforward to attach and remove during a prep session
• Easy to clean down between uses to meet hygiene requirements
• Compact to store when not in use

As with any mincer attachment, it is worth confirming compatibility with your specific Santos mincer model before ordering, as fitting can vary across the range. If you are unsure which accessories are correct for your machine, the team is happy to help you check before you buy.

The pulp grid is a key working component in the Santos No 52 juicer, responsible for separating pulp from juice during the extraction process. Over time and with regular commercial use, the grid can become worn or damaged, affecting juice clarity and extraction efficiency. This is the manufacturer-specified replacement part, compatible with Santos No 52 models K277, CK690, and CK691.

In a busy juice bar, café, or hotel breakfast service, a worn pulp grid will show itself quickly — juice quality drops, pulp passes through more readily, and cleaning becomes harder. Replacing the grid at the first sign of wear rather than waiting for a failure keeps service consistent and avoids unnecessary downtime during a busy period.

Fitting a genuine replacement grid rather than a substitute helps maintain the performance the No 52 was designed to deliver. It also ensures the juicer continues to clean correctly, which matters in any kitchen where hygiene standards are a daily operational concern.

Before ordering, confirm your Santos No 52 model reference against the compatibility list above — K277, CK690, and CK691 are covered here, but Santos produces variants and not all grids are interchangeable across the range.

If you are unsure whether this part is correct for your machine, or if you need advice on servicing or other replacement components for your Santos equipment, the team is happy to help you confirm the right part before you order.

The Santos Grid D is a replacement mincer grid plate designed for use with compatible Santos electric mincers. Mincer grids are wear items — the plate is what determines the texture and coarseness of the minced output, and having the correct grid for the task in hand is a basic operational requirement in any kitchen that processes raw meat regularly.

In a busy prep kitchen, mincer grids take consistent punishment. Over time, the cutting surfaces dull and throughput slows, which means the motor works harder and output quality drops. Keeping a spare grid in the correct specification allows operators to swap plates quickly during prep without extended downtime, maintaining throughput when it matters most.

Practically speaking, the right grid makes a measurable difference to both texture and yield. Using a worn or incorrect plate can result in uneven mince, smearing rather than clean cutting, and product that doesn't meet specification. Fitting a genuine Santos replacement grid restores performance to the original standard and helps extend the working life of the mincer itself.

This grid is designed specifically for Santos mincer units — it is not a universal fitting. Before ordering, it is worth confirming which Santos mincer model you are running and whether Grid D matches the output texture you require, as Santos offer grids in several configurations to suit different applications.

If you are unsure which grid size or specification is correct for your machine and your menu requirements, the team is happy to help you confirm compatibility before you order.

The Santos basket driving pin is a replacement component designed for the Santos No.28 high-output centrifugal juice extractor. It forms part of the drive assembly that connects the motor to the extraction basket, allowing the basket to spin at the speed required to process fruit and vegetables efficiently during service.

In a busy juice bar, café, or kitchen environment, small mechanical components like the driving pin are subject to wear over time, particularly in high-throughput operations where the machine runs continuously across service periods. Having the correct replacement part on hand minimises downtime and keeps the machine in safe, reliable working order.

This is a precise-fit spare part. Fitting the wrong component can affect the balance of the basket assembly or cause premature wear to other parts of the drive mechanism, so it is important to confirm compatibility with your specific Santos model before fitting.

If you are unsure whether this is the correct part for your machine, or if your extractor has developed a more complex fault, we are happy to help you identify the right component before you order.

The Santos complete basket is a genuine replacement part designed to fit the Santos No.50 centrifugal juicer. The basket is the core filtering component in the juicing process, separating juice from pulp as the machine spins at speed. Over time and with regular commercial use, baskets can wear, clog, or sustain damage that affects both juice yield and hygiene — making a quality replacement an important part of keeping the machine in proper working order.

In a busy juice bar, café, or hotel breakfast service, the condition of the basket directly affects output quality. A worn or damaged basket can reduce extraction efficiency, allow pulp through into the finished juice, and make cleaning more difficult. Replacing it with a correctly specified part restores the machine to its original performance standard.

• Designed to fit the Santos No.50 centrifugal juicer
• Restores full juice extraction and pulp separation performance
• Supports consistent output quality across a service period
• Correct fit ensures safe, secure operation of the juicer
• A straightforward replacement that avoids more costly machine downtime

It is worth keeping a spare basket on hand if the No.50 is in daily commercial use — particularly in high-volume operations where cleaning cycles between services are tight. Having a replacement ready means the machine can stay in service while the used basket is cleaned thoroughly.

If you are unsure whether this basket is the correct part for your machine, or if you have questions about maintaining your Santos juicer, feel free to get in touch with the team.