Slim Jim

The Rubbermaid Slim Jim step-on bin is a hands-free waste container designed for commercial kitchens, service corridors, and front-of-house areas where hygiene and space efficiency both matter. The front-step pedal allows staff to open the lid without making contact with the bin at any point during service — a straightforward but meaningful contribution to cross-contamination control.

The lid operates on a soft-closing damper rather than snapping shut. A slamming lid creates a sudden displacement of air that can carry contaminants out of the container and into the surrounding environment. The damper eliminates that risk and reduces noise during busy service periods, which is a practical consideration in any working kitchen.

The Slim Jim profile is notably narrow relative to its 50-litre capacity, making it easier to position in tight runs or beside prep stations without obstructing staff movement. The polyethylene construction and smooth, contoured surfaces clean down quickly and hold up well against the knocks and scuffs typical of a commercial environment.

• Hands-free pedal operation removes a contact point during food prep and service
• Soft-close damper limits air dispersal and reduces noise on closing
• Slim footprint fits tight spaces without sacrificing usable capacity
• Smooth polyethylene surfaces wipe down quickly and resist staining
• Robust enough for regular daily use in a busy commercial environment

This bin is well suited to prep kitchens, service corridors, and front-of-house settings where a mid-capacity, hygiene-conscious solution is needed without a large floor footprint. For higher-volume applications or sites requiring larger capacity, other options in the Slim Jim range are worth considering.

If you are specifying waste management across multiple stations or working towards a HACCP-compliant setup, the team is happy to help you think through bin placement and capacity requirements.

The Rubbermaid Slim Jim Step-On Pedal Bin is a compact, hands-free waste bin designed for use in commercial kitchens, food preparation areas, and front-of-house environments. The pedal-operated lid allows users to dispose of waste without touching the bin, reducing the risk of cross-contamination at points where hygiene control matters most. At 15 litres, it is suited to lower-volume waste stations or areas where space is limited.

In practice, this bin works well at individual prep stations, wash-up areas, or front-of-house positions where a full-size bin would be impractical. The soft-closing lid keeps noise to a minimum during service, and the slimline profile fits neatly into tight spaces without obstructing workflow. Constructed from polyethylene, it stands up to regular daily use and is straightforward to wipe down or remove for cleaning.

Key practical advantages include:

• Hands-free operation reduces contact with potentially contaminated surfaces
• Soft-closing lid minimises noise during busy service periods
• Slimline footprint suits confined prep and service areas
• Polyethylene construction resists cracking and is easy to clean
• White finish suits front-of-house and customer-facing positions

At 15 litres, this bin is best suited to low-to-medium waste output positions. For high-volume kitchen sections generating significant waste during a full service, a larger-capacity bin from the Slim Jim range is likely a more practical choice. It does not require any installation — simply position it where needed.

If you are fitting out multiple waste stations or need guidance on matching bin capacity to your kitchen's waste output, the team is happy to help you work through the options.

The Rubbermaid Slim Jim Step-On is a front-pedal operated waste bin with a 30-litre capacity, constructed in stainless steel. It is designed for use in commercial kitchens, food preparation areas, and front-of-house spaces where hands-free waste disposal and hygiene control are practical requirements.

In a working kitchen environment, the front-pedal mechanism allows staff to open the lid without using their hands, which matters during food preparation and service when cross-contamination risk needs to be managed. The stainless steel body resists the knocks and daily wear of a busy back-of-house environment and can be wiped down or disinfected quickly — an important consideration during cleaning routines or routine health inspections.

Its slim footprint makes it a practical choice where floor space is tight. It can sit neatly at a prep station, alongside a cooking line, or at a service pass without obstructing movement. Key practical advantages include:

• Hands-free operation reduces cross-contamination risk during food prep
• Stainless steel surface is straightforward to clean and disinfect
• Slim profile suits confined areas without blocking workflow
• Durable construction holds up to regular use in demanding environments

The 30-litre capacity is well suited to smaller kitchens, individual prep stations, or areas generating moderate waste volumes. In higher-volume operations producing significant waste during service, a larger-capacity model may serve better to reduce the frequency of emptying.

If you are unsure whether this size is the right fit for your kitchen layout or waste management setup, the team is happy to help you work through the options.

The Rubbermaid Slim Jim is a narrow-profile, high-capacity waste bin designed for commercial environments where floor space is limited but waste volume is not. Made from commercial-grade polyethylene, it holds its shape under continuous daily use without flexing or deforming — a common failure point on lighter domestic bins pressed into service in busy kitchens.

The defining feature of this bin is its internal venting channels. These panels direct airflow beneath the liner, breaking the vacuum that typically forms when you try to pull out a full or heavy bag. The result is noticeably easier liner removal, which matters when staff are turning over bins at pace during a busy service or end-of-day clean-down. Four integrated bag clinches around the rim hold the liner securely in place without tying or tucking — a small detail that saves time and reduces the chance of a bag slipping down mid-service.

In practical terms, the Slim Jim suits back-of-house runs, prep areas, and pass-through spaces where a standard round bin would obstruct movement. Its slim footprint allows it to sit flush against a wall or between units without creating a trip hazard.

• Venting channels allow significantly easier liner removal than unvented bins
• Four bag clinches secure liners without knotting
• Narrow profile suits tight runs and prep corridors
• Compatible with separately available lids and colour-coded labels for waste stream segregation
• Durable polyethylene construction suited to continuous commercial use

For sites needing a colour-coded recycling system, the Slim Jim works well alongside matching lids and sticker sets, which are available separately. If your operation generates significantly higher waste volumes or requires a fixed-lid solution for odour control, it is worth considering whether a larger or lidded alternative would be more practical.

If you are speccing waste management across a new or refurbished kitchen and want to talk through capacity and placement, the team is happy to help.

The Rubbermaid Slim Jim Step-On is a foot-operated waste bin constructed in stainless steel, designed for use in commercial kitchens, food preparation areas, and anywhere that hygiene and a compact footprint matter. The pedal mechanism keeps hands free from contact with the lid at all times, which is a straightforward but genuinely useful feature in any environment where cross-contamination risk needs to be minimised.

In day-to-day kitchen use, the stainless steel casing holds up well to the knocks and cleaning routines of a working kitchen. The smooth surfaces are straightforward to wipe down and disinfect, and the construction resists the kind of corrosion that can affect lesser materials over time when exposed to food waste and cleaning chemicals.

Practical advantages of this bin for kitchen and front-of-house environments include:

• Hands-free operation reduces cross-contamination risk during food prep
• Stainless steel finish is easy to clean and disinfect thoroughly
• Slim profile fits into tighter spaces without a significant floor footprint
• Robust construction suitable for continuous use in busy kitchens
• 50-litre capacity reduces the frequency of bag changes during service

The slim rectangular profile is a deliberate design feature rather than a marketing point — it genuinely fits into spaces where a standard round bin would not, such as alongside prep stations, under pass-throughs, or in narrow corridors. No utilities or installation are required; it is a free-standing unit that simply needs a suitable floor position.

This bin is well suited to commercial kitchens, food preparation rooms, hospital catering, school kitchens, and similar environments where hygiene compliance and space efficiency both matter. For higher-volume settings or areas generating greater waste output, a larger-capacity model may be worth considering.

If you are equipping a kitchen and would like to talk through the right waste management setup for your operation, the team is happy to help.

The Rubbermaid Slim Jim is a 50-litre step-on waste bin built around a reduced-depth profile. Where a conventional bin of similar volume tends to project well into the floor space, the Slim Jim's shallower footprint allows it to sit flush against a wall or slide into a galley run without eating into the working area around it. It is a straightforward solution to a common problem in commercial kitchens where floor space is genuinely limited.

The front-mounted foot pedal is recessed into the body rather than protruding outward, which reduces the risk of it catching passing staff in busy service conditions. The opening is sized to work with safety footwear and clogs — practical in most professional kitchen environments. Hands-free operation matters during service, and this bin handles that without any complication.

The polyethylene construction holds up well to daily knocks and is easy to wipe down at the end of a shift. The white finish makes soiling visible early, which supports good hygiene habits rather than letting waste build up unnoticed.

• Slim footprint fits against walls, under counters, and into tight galley-style layouts
• Recessed front pedal reduces trip risk in high-traffic corridors and prep areas
• Hands-free lid operation keeps hygiene standards consistent during service
• Smooth interior surfaces clean down quickly at the end of each shift
• Suitable for waste stations, pass areas, prep zones, and back-of-house corridors

This bin is a practical fit for smaller restaurant kitchens, café back-of-house areas, and service counters where a full-depth bin simply will not work. Sites generating considerably higher waste volumes may find a larger-capacity format better suited to their throughput.

If you are planning a waste management layout and want to talk through the right size or format for your space, we are glad to help.

The Rubbermaid Slim Jim Step-On Container is a hands-free waste bin designed for environments where space is at a premium and presentation matters. Its narrow footprint allows it to sit flush against walls or fit into gaps between workstations that a standard round bin simply would not occupy. The front foot pedal opens the lid without requiring hand contact, and the internal hinge mechanism means the lid swings inward rather than outward — useful in tight corridors or service areas where clearance is limited.

In day-to-day commercial use, the quiet-close lid is a practical detail that often gets overlooked until you have experienced the alternative. In front-of-house areas — hotel lobbies, restaurant dining rooms, buffet serveries — the absence of lid noise keeps things calm during service. The resin construction is easy to wipe down and resists the knocks and cleaning chemicals typical of a busy environment.

Practical operational advantages include:

• Hands-free operation reduces cross-contamination risk in food handling areas
• Internal hinge design protects surrounding walls and fixtures
• Slim profile fits into spaces a standard bin cannot occupy
• Quiet-close lid suited to customer-facing areas
• Resin body resists moisture and is simple to clean

It is worth noting that at 50 litres this bin is well suited to light-to-moderate waste volumes — a front-of-house station, a staff area, or a supplementary point within a larger kitchen. In high-throughput back-of-house settings generating significant waste during service, a higher-capacity unit would typically be the more practical choice.

This bin works well in hotels, care homes, office canteens, and restaurant front-of-house areas where a presentable, unobtrusive waste solution is needed. If you are unsure whether this size fits your workflow, or you are specifying bins across multiple stations, the team is happy to help you work through the options.

The Rubbermaid Slim Jim is a slim-profile, high-capacity waste bin designed specifically for commercial environments where floor space is limited. Made from commercial-grade polyethylene with a reinforced rim, it holds a useful 60 litres of waste while occupying a notably narrow footprint — making it practical for positioning alongside prep stations, pass areas, or back-of-house corridors without obstructing movement.

In a busy kitchen environment, the venting channels along the sides are a small but genuinely useful detail. They break the vacuum that forms between a full bin liner and the container wall, meaning liners pull out cleanly rather than requiring staff to wrestle with them mid-service. The reinforced rim resists the kind of casual rough handling that tends to crack or deform cheaper bins over time.

• Venting channels allow bin liners to be removed cleanly without resistance
• Reinforced rim reduces the risk of distortion under heavy use
• Green colouring supports colour-coded waste segregation systems
• Narrow profile fits alongside stations without blocking access routes
• Suitable for both indoor and outdoor commercial use

There are no installation requirements — the bin is freestanding and requires no fixings or connections. It is worth considering that at 60 litres, this bin suits moderate-volume waste streams; high-throughput kitchens or sites with significant wet waste may find they need to empty it frequently, in which case a larger-capacity model from the same range would be worth considering.

This bin is well suited to cafés, small restaurant kitchens, front-of-house areas, and any site operating a colour-coded recycling or waste segregation scheme. If you are fitting out a full waste management setup and want to talk through capacity or colour-coding requirements, the team are happy to help you get it right.

The Rubbermaid Slim Jim Step-On Container is a hands-free waste bin designed for commercial environments where floor space is at a premium. Its narrow, upright profile allows it to fit into gaps between worktops, along corridors, or in service areas where a standard round bin simply would not go. The front-mounted pedal keeps the lid closed between uses, reducing odour spread and maintaining a cleaner working environment.

In busy kitchen and front-of-house settings, the bin performs reliably through heavy daily use. The resin construction is robust enough to withstand repeated contact from footwear, trolleys, and general kitchen activity without cracking or distorting. The pedal mechanism is rated for commercial-grade use, meaning it holds up over extended periods without the stiffening or failure that lighter domestic bins tend to show under similar conditions. The silent lid closure is a practical detail in customer-facing areas such as cafés, buffet serveries, or hotel corridors where noise is a consideration.

Practical day-to-day advantages include:

• Hands-free operation keeps cross-contamination risk low during service
• Slim footprint fits where larger bins cannot, without compromising capacity
• Colour-coded red supports waste segregation or cleaning chemical identification
• Smooth resin surfaces wipe down quickly at the end of service
• Lid stays closed between uses, reducing odour and improving hygiene compliance

No installation is required. The bin is freestanding and self-contained, needing only a suitable Slim Jim liner bag to operate. It is worth confirming that the liner size matches the 50-litre capacity before ordering consumables, as standard round bin bags are often too wide and do not seat correctly in the slim profile.

This bin is well suited to cafés, hotel service areas, healthcare corridors, and any commercial kitchen or front-of-house environment where floor space is tight and hands-free operation is preferred. For very high-throughput areas generating significant waste volume in short periods, a larger-capacity unit may be worth considering alongside this one. If you are unsure whether this size fits your workflow, the team is happy to talk through your requirements.

The Rubbermaid Slim Jim Step-On Container is a 90-litre pedal-operated waste bin built for regular use in commercial kitchens, food service areas, and back-of-house environments. The front-mounted foot pedal opens the lid without requiring hand contact, and the lid closes silently — a practical detail in busy service areas where noise and hygiene are both concerns.

The container is moulded from a durable resin in a single-piece construction, which removes the crevices and join points where waste residue tends to accumulate. The red colour makes it straightforward to integrate into a colour-coded waste or recycling system, which is a common requirement in kitchens operating under food hygiene management frameworks.

From an operational standpoint, this container suits a range of positions in a working kitchen:

• Hands-free operation reduces cross-contamination risk during food prep
• Silent lid closure avoids disruption in customer-adjacent areas
• Red colour supports colour-coded waste segregation systems
• Slim-profile footprint fits into tighter service corridors and prep areas
• One-piece resin body is straightforward to clean and resists cracking under daily use

There are no electrical or water connections required. Placement is flexible, though the container performs best on a level floor surface. At 8kg empty, it is manageable to move for cleaning, though a full 90-litre bin will require care when repositioning. The slim-profile design is a deliberate feature for sites where floor space is limited, though it does mean the bin is taller relative to its footprint than a conventional round waste container of similar capacity.

This container is well suited to commercial kitchens, canteens, food preparation areas, and front-of-house hospitality environments where touchless waste disposal and colour-coded hygiene systems are in place. For very high-throughput sites generating significant waste volume, it is worth considering whether a larger-capacity model would reduce how frequently staff need to empty and reline the bin during service.

If you are unsure whether this size and colour combination is right for your waste management setup, our team is happy to talk through your requirements.

The Rubbermaid Slim Jim is a 30-litre step-on waste bin built around a narrow footprint. Where a standard round bin would obstruct a corridor or galley run, the Slim Jim's slim profile fits without getting in the way. The front-mounted foot pedal is a practical detail — it allows the bin to sit flush against a wall without the pedal catching the surface behind it, which matters in tight back-of-house areas where every centimetre counts.

The internal hinge keeps the overall profile compact and prevents the lid from swinging back against walls during busy service. Lid closure is quiet, making this a reasonable option not just for kitchens but for front-of-house waste points or any area where noise during service is a consideration.

In day-to-day use, the Slim Jim works best as a secondary or zoned bin rather than a primary high-volume disposal point. It is well suited to dedicated waste streams — dry waste, packaging, recyclables — where keeping categories separated and tidy is more important than raw capacity. Key operational advantages include:

• Narrow profile fits galley kitchens, service corridors, and tight back-of-house runs
• Front pedal allows wall-flush positioning without pedal fouling the surface
• Internal hinge keeps the bin compact and protects nearby wall surfaces
• Quiet lid closure suited to front-of-house or noise-sensitive environments
• Polyethylene construction wipes clean quickly and resists odour build-up

For sites with heavier general waste volumes or where a single bin needs to serve as the primary disposal point, a larger-capacity model would be worth considering. The Slim Jim earns its place as a space-efficient, category-specific solution rather than a workhorse bin.

If you are working out how to organise waste streams across a constrained kitchen layout, our team is happy to talk it through with you.

The Rubbermaid Slim Jim is a hands-free, step-operated waste bin built for continuous use in commercial kitchens, food preparation areas, and front-of-house environments. The front-mounted foot pedal opens the lid without hand contact, and a built-in soft-close damper brings the lid down gradually rather than allowing it to fall shut. That detail matters in practice — a conventional lid slamming closed displaces a pulse of air outward, which can carry odours and airborne particles into the surrounding area. The Slim Jim avoids this.

The polyethylene construction wipes down quickly, and the contoured profile has few recessed edges where debris can collect. In a busy kitchen or service corridor, that reduces cleaning time during a turnaround. The 90-litre capacity handles high-turnover waste points without requiring constant emptying mid-service.

• Hands-free operation reduces cross-contamination risk during food preparation
• Soft-close damper prevents air displacement when the lid closes
• Narrow footprint works in tighter back-of-house corridors and pass areas
• Smooth polyethylene surfaces clean down quickly between services
• Suitable for general waste, dry waste, or lined wet waste streams

The slim profile makes it a practical choice where a standard round bin would obstruct foot traffic or workflow. It is commonly used in prep kitchens, pass areas, and front-of-house service points. For very high-volume sites generating significant waste in short periods, a higher-capacity bin may be worth considering alongside this model.

If you are fitting out multiple waste points across a site and want to talk through which capacity suits each area, the team is glad to help.

This yellow lid is designed specifically for use with Rubbermaid's 60 and 87 litre Slim Jim® bins, providing a clearly colour-coded cover to support cans and bottles recycling streams. Made from polypropylene, it fits both bin capacities and is intended to work as part of a structured waste separation setup rather than as a standalone item.

In a commercial kitchen or front-of-house environment, consistent waste segregation depends heavily on clear visual cues at the point of disposal. The yellow colour follows widely recognised recycling conventions, which helps staff and customers direct cans and bottles to the correct bin without needing to read signage or labels each time. This is particularly useful in high-traffic areas or multi-staff kitchens where waste habits need to become instinctive rather than considered.

• Colour-coded yellow lid for immediate recognition of the cans and bottles stream
• Compatible with both 60 and 87 litre Slim Jim® bin bodies
• Polypropylene construction is resistant to everyday wear and easy to wipe down
• Supports waste compliance and recycling targets in commercial premises
• Lightweight and straightforward to swap between bin bodies when reconfiguring waste stations

There are no installation requirements as such, though it is worth confirming you have the correct Slim Jim® bin body before ordering — this lid is not a universal fit and will not seat correctly on non-Slim Jim® containers. If you are setting up a full colour-coded waste station, lids in other colours are available to cover separate recycling streams alongside this one.

This lid suits any commercial kitchen, hospitality venue, or food service operation looking to formalise recycling separation. It is a straightforward, practical component rather than a complete waste management solution, so if you are specifying a full waste station for a larger site, it is worth talking through the full range of bin and lid combinations first.

If you are unsure which lid colours or bin sizes to pair for your site, the team is happy to help you put together a sensible setup.

The Rubbermaid Slim Jim is a well-established commercial waste container designed for back-of-house and front-of-house use where space is at a premium. Its narrow footprint makes it practical in tight service corridors, behind counters, and in prep areas where a standard round bin would obstruct workflow. The polyethylene construction is robust enough for daily commercial use and straightforward to wipe down between services.

In a working kitchen environment, the venting channels built into the container body make a genuine difference at the end of a busy shift. They break the vacuum seal that forms between a full liner and the bin wall, meaning staff can remove a loaded bag cleanly without the liner tearing or the bin tipping. It is a small detail that reduces mess and speeds up waste changeovers during service.

• Narrow profile fits neatly into service corridors and behind counters
• Venting channels allow liner removal without vacuum resistance or tearing
• Compatible with colour-coded lids for simple waste stream separation
• Polyethylene body resists impact and is easy to clean down
• Lightweight enough for staff to relocate quickly between service areas

There are no installation requirements — the container is freestanding and requires no fixings, drainage, or power. It is worth considering whether a single unit will cover your waste volume across a full service period, or whether multiple containers positioned at key points would suit your operation better. For higher-volume sites or where larger capacity is needed, the Slim Jim range includes larger options worth considering.

This container is well suited to cafés, pub kitchens, school canteens, and smaller commercial operations where controlled waste separation and space efficiency matter. If you are fitting out a larger site or planning a waste management layout across multiple stations, the team is happy to help you work through the right approach.

The Rubbermaid Slim Jim Three Stream Recycling Station provides a compact, self-contained waste segregation solution covering three streams: general waste, food waste, and mixed recycling. Each of the three containers holds 87 litres, giving a meaningful combined capacity without the footprint of three standalone bins. The station is constructed from polyethylene, which handles the knocks and moisture typical of a working kitchen environment.

In practice, having all three streams in a single unit reduces the time staff spend moving between separate bins during service and makes correct waste sorting more consistent. The slim profile of the Slim Jim design means the station can be positioned in corridors, service areas, or back-of-house spaces where a wider unit would obstruct movement. The vented channels built into each container make liner removal noticeably easier — a small detail that adds up during busy shifts when bins need changing quickly.

Key practical points for operators:

• Three clearly labelled streams in one footprint — supports waste compliance without cluttering the space
• Slim Jim profile fits tighter back-of-house layouts and service corridors
• Vented channels reduce liner drag and speed up bin changes during service
• Polyethylene construction resists moisture, cleaning chemicals, and everyday impact
• Suitable for both front-of-house recycling points and back-of-house kitchen areas

No utilities or installation work are required — the station is free-standing and ready to position as needed. The main practical consideration is floor space: at just over 900mm wide, it needs a clear, accessible run to allow staff to swap liners and empty containers without obstruction. It is not fixed to the floor, so on very busy sites it is worth positioning it against a wall or in a defined waste zone to keep it stable and in place.

This station is well suited to cafés, restaurants, workplace canteens, schools, and similar food-service operations where segregating waste at point of generation is important for compliance or sustainability targets. For very high-footfall sites generating significantly more waste volume, a larger-capacity or multi-unit arrangement may be more appropriate.

If you are unsure whether this configuration covers your waste streams or fits your layout, the team is happy to talk it through before you commit to an order.

The Rubbermaid Slim Jim Step-On Container is a front-pedal operated waste bin designed specifically for environments where space is limited but hygiene and ease of use are non-negotiable. The 68-litre resin body offers a practical capacity for day-to-day waste disposal without taking up more floor space than necessary, and the narrow profile is what sets the Slim Jim range apart from standard round bins.

In a working kitchen, the hands-free pedal operation is a practical hygiene measure — kitchen staff can dispose of waste without touching the lid, reducing cross-contamination risk during food preparation and service. The lid closes silently, which is a small but worthwhile detail in customer-facing areas or open-plan kitchen environments where noise matters.

Key practical advantages include:

• Front-pedal operation keeps hands free and reduces contamination risk
• Silent-close lid suitable for front-of-house and open kitchen settings
• Slim footprint fits alongside counters, in corridors, and in prep areas
• Resin construction resists moisture and is straightforward to wipe down
• Lightweight enough to relocate easily as kitchen workflow changes

The slim profile makes this bin well suited to positioning in spaces where a standard bin simply would not fit — beside a prep bench, at the end of a service counter, or in a back-of-house corridor. It is not designed as a primary high-volume waste container for large production kitchens, but works reliably as a secondary or point-of-use bin at workstations.

If you are fitting out multiple stations or need guidance on the right bin configuration for your site, the team is happy to help you work through the options.

This yellow lid topper is designed for use with the Rubbermaid Slim Jim Recycling Station and is specifically labelled for bottles and cans. The colour coding and labelling are intended to make waste sorting straightforward at the point of disposal, reducing the likelihood of contamination across recycling streams.

In a busy back-of-house environment, clear waste segregation is often overlooked under service pressure. Having a visually distinct, labelled lid on each container takes the decision-making out of the process — staff can sort correctly without needing to think about it, which helps maintain compliance with waste separation requirements and keeps recyclable material genuinely recyclable.

• Yellow colour coding for instant visual identification at point of disposal
• Labelled specifically for bottles and cans to reduce cross-contamination
• Compatible with the Slim Jim Recycling Station system
• Supports waste segregation compliance in commercial kitchens and front-of-house areas

This lid is a component part rather than a standalone product, so it requires the corresponding Slim Jim Recycling Station base to function as intended. It is worth confirming compatibility with your existing Slim Jim unit before ordering, as the Slim Jim range includes several container sizes.

Well suited to any operation looking to formalise its recycling process — from pub kitchens and café back-of-house areas through to larger contract catering sites. If you are setting up a full recycling station or are unsure which lids and bases work together, the team is happy to help you put the right combination together.

The Rubbermaid Slim Jim closed lid is a replacement or addition lid designed to fit the standard Slim Jim waste container range. The closed design keeps waste contained, reduces odours, and limits exposure to debris — practical in areas where open-top bins are not appropriate.

In commercial environments, a closed lid makes a meaningful difference in front-of-house areas, corridors, and anywhere staff or customers are in close proximity to waste points. It helps maintain a tidier appearance and reduces the risk of loose waste or pests accessing the bin. The Slim Jim container itself is a widely used format in catering and hospitality, and this lid is the straightforward way to adapt an existing unit for settings where containment matters.

Key practical points worth noting:

• Fits the standard Slim Jim container — check compatibility with your existing unit before ordering
• Closed top design reduces odour and limits pest access
• Black finish suits most back- and front-of-house environments
• Simple push-fit or swing access keeps use practical during busy service
• Useful in corridors, server stations, and customer-facing waste points

This is a straightforward accessory, but it's worth confirming which Slim Jim container variant you have before ordering, as lid compatibility can vary across the range. If you're setting up a waste management station or sourcing multiple units, the team is happy to help ensure everything works together.

The Rubbermaid Slim Jim Recycling Station Billboard is a colour-coded signage panel designed to fit the Slim Jim Recycling Station unit. The red variant is intended to identify a specific waste stream, providing a clear visual prompt at the point of disposal to help staff and visitors sort waste correctly without needing to think about it.

In busy commercial kitchens, dining areas, and front-of-house environments, waste sorting tends to fall apart when the process relies on people remembering what goes where. A clearly labelled, colour-coded station removes that ambiguity. The red billboard acts as a consistent visual cue that becomes part of the workspace rather than an afterthought, which tends to improve sorting compliance over time with minimal effort from management.

Practical benefits include:

• Colour coding reduces sorting errors at point of disposal
• Consistent labelling supports waste management compliance
• Compatible with the Slim Jim Recycling Station system
• Durable construction suited to daily commercial use
• Helps reduce contamination in recycling streams

This billboard is a component part and requires a compatible Slim Jim Recycling Station to function as intended. It is not a standalone unit. If you are building out a full waste sorting system across multiple areas, it is worth considering how many stations and which colour combinations best reflect your specific waste streams before ordering.

Well suited to kitchens, canteens, hospitality venues, and any commercial environment where waste segregation needs to be clearly communicated to a mixed or rotating workforce. If you are unsure which configuration works best for your site, the team is happy to help you work through it.

The Rubbermaid Slim Jim Paper Slot lid is a colour-coded topper designed to fit the Slim Jim Recycling Station, identifying the container for paper waste. The elongated slot opening allows sheets, card, and paper-based waste to be deposited cleanly without the need to open or handle the bin directly.

In a busy front-of-house, back-of-house, or office-adjacent catering environment, clear waste segregation at the point of disposal reduces cross-contamination between waste streams and supports compliance with recycling obligations. The blue colour coding follows widely used waste stream conventions, making it straightforward for staff to identify the correct bin without additional instruction.

• Colour-coded blue for instant paper waste stream identification
• Slot opening sized for paper and card without requiring bin access
• Fits directly onto compatible Slim Jim Recycling Station containers
• Supports waste segregation at the point of disposal
• Helps reduce cross-contamination between recycling streams

It is worth noting that this lid is designed specifically for use with the Slim Jim Recycling Station — it is not a universal fit for other container ranges. If you are building out a full recycling station with multiple streams, matching lids in different colours are available to complete the setup.

This lid suits catering operations, staff canteens, hospitality venues, and any site where waste sorting compliance is a requirement. For higher-volume or larger-format waste station needs, deeper-capacity Slim Jim configurations may be worth considering.

If you are speccing out a waste management solution for a new site or refurbishment, we are happy to advise on the right combination of containers and lids for your setup.

The Rubbermaid Slim Jim Closed Lid in brown is a replacement or additional lid designed to sit on top of the Slim Jim Recycling Station container. The brown colour is commonly used to designate a specific waste stream — helping staff and customers sort waste correctly at the point of disposal rather than sorting it later.

In a busy commercial kitchen or front-of-house area, consistent waste segregation reduces the time spent on post-service sorting and supports compliance with local recycling requirements. A closed lid also helps contain odours and keeps the bin area looking presentable during service, which matters in open kitchen or customer-facing environments.

• Colour-coded brown lid aids waste stream identification at point of disposal
• Closed design contains odours and maintains a tidy appearance
• Compatible with the Slim Jim Recycling Station container
• Straightforward to swap out or replace on existing units

It is worth confirming that the lid you select matches your existing Slim Jim container size before ordering, as Slim Jim components are size-specific. If you are building out a full waste segregation station with multiple streams, we are happy to help you identify the right combination of containers and lids.

The Rubbermaid Slim Jim Recycling Station Billboard is a colour-coded signage panel designed to fit the Slim Jim Recycling Station. The blue variant is intended for recycling streams, providing a clear visual prompt at the point of disposal to help staff and customers direct waste into the correct container.

In busy commercial environments — canteens, hospitality venues, food courts, and back-of-house areas — waste sorting is easily overlooked during service. A clearly labelled, colour-coded station removes ambiguity and reduces the likelihood of contamination between waste streams, which in turn supports recycling compliance and can reduce disposal costs over time.

• Colour-coded blue to indicate recycling use at a glance
• Designed as a visual prompt to encourage correct waste sorting at source
• Compatible with the Slim Jim Recycling Station system
• Supports waste segregation compliance in commercial and catering environments

This billboard is a replacement or addition panel rather than a standalone product — it works as part of a broader Slim Jim Recycling Station setup. It is worth confirming which topper and label configuration your existing station uses before ordering, to ensure the billboard fits and aligns with your current waste stream colour coding.

Well suited to any operation looking to reinforce waste segregation habits among staff or the public, particularly where multiple waste streams are collected in the same area. If you are setting up a full recycling station from scratch or need guidance on which combination of toppers, billboards, and labels suits your operation, the team is happy to help you work through the options.

The Rubbermaid Slim Jim Recycling Station Billboard is a colour-coded display panel designed to attach to the Slim Jim Recycling Station unit. The yellow variant is used to identify a specific waste stream — typically dry mixed recyclables or a designated category depending on your site's waste management setup — giving staff and visitors a clear, immediate visual prompt at the point of disposal.

In busy commercial kitchens, canteens, and food service environments, waste sorting often falls apart under pressure. Clear, consistent visual cues at each bin help maintain compliance without relying on staff to remember sorting rules. The billboard format keeps the message visible at a useful height, reducing the risk of cross-contamination between waste streams and keeping recyclable material out of general waste.

• Colour-coded yellow for clear waste stream identification
• Designed to work with the Slim Jim Recycling Station system
• Encourages correct waste sorting at the point of disposal
• Supports compliance with site waste management and recycling targets
• Suitable for kitchens, back-of-house areas, canteens, and front-of-house service zones

This billboard is an accessory component and requires a compatible Slim Jim Recycling Station to function. It is worth confirming your existing station model before ordering to ensure compatibility. Where you are setting up a full recycling station from scratch, the billboard works alongside colour-coded lid toppers and waste stream labels to build a complete, consistent system.

Well suited to any food service or hospitality site looking to improve waste segregation habits and reduce contamination in recycling collections. If you are specifying a full waste management setup across multiple stations or locations, the team is happy to help you work through the right combination of components.

The Rubbermaid Slim Jim Recycling Label Kit provides replacement waste stream decals designed for use with Slim Jim Recycling Station Billboards. Each pack contains ten sets of ten stickers, covering the standard waste categories needed to keep a recycling station clearly and consistently labelled.

In a busy kitchen or front-of-house environment, unlabelled or worn waste bins quickly lead to contamination — staff sorting incorrectly under pressure, recyclables ending up in general waste, and compliance becoming difficult to maintain. Keeping Billboards clearly labelled with legible, purpose-printed decals helps reinforce correct sorting habits at the point of disposal, where it matters most.

Practical advantages for operators include:

• Intuitive pictogram-style decals that work across mixed language teams
• Designed specifically to fit Slim Jim Billboard frames for a clean, professional finish
• Pack of ten sets supports multiple stations or provides a useful stock of replacements
• Reduces waste contamination by making the correct bin obvious at a glance

These labels are straightforward to apply and are best treated as a consumable — replacing worn or damaged decals regularly helps maintain the effectiveness of the recycling station over time. There are no installation requirements beyond the existing Billboard frame.

Well suited to hospitality and catering operations that already use the Slim Jim Recycling Station system and want to maintain clear waste segregation across multiple bins or locations. If you are setting up a recycling station from scratch or are unsure which components you need, the team is happy to help you specify the right setup.

The Rubbermaid Slim Jim Recycling Station Billboard is a replacement or additional signage panel designed to fit the Slim Jim Recycling Station unit. The black billboard panel provides a clear, visible prompt at the point of disposal, helping staff and visitors identify the correct stream for each type of waste without ambiguity.

In busy commercial kitchens, serveries, and front-of-house areas, waste sorting tends to break down not because people are unwilling, but because the signage is unclear or absent. Fitting a billboard panel to each station removes that uncertainty. It reinforces consistent sorting habits during service periods when staff are moving quickly and have little time to stop and think.

The practical benefits of keeping billboards in place and in good condition include:

• Clearer waste stream identification at the point of disposal
• Supports compliance with workplace recycling obligations
• Reduces contamination across recycling streams
• Helps maintain a tidy, organised waste area during busy service
• Compatible with colour-coded toppers for a coordinated station setup

This billboard is compatible with the Slim Jim Recycling Station and works alongside the range of colour-coded toppers and waste labels available for the system. It is worth confirming compatibility with your existing station configuration before ordering, particularly if your units are from an older production run.

Well suited to kitchens, canteens, hospitality venues, and food service operations where waste segregation is part of daily operations. If you are setting up a full recycling station or are unsure which combination of toppers, labels, and billboard panels is right for your site, the team is happy to help you put the right kit together.

The Rubbermaid Slim Jim Recycling Station Billboard is a colour-coded signage panel designed to fit the Slim Jim Recycling Station. The green variant is intended for recyclable waste streams, providing a clear visual prompt at the point of disposal to encourage correct sorting of materials before they reach the bin.

In busy commercial kitchens, staff areas, and front-of-house environments, waste sorting often breaks down simply because the guidance isn't visible at the moment it's needed. Fitting a clearly labelled billboard to each station removes that ambiguity, making it easier for staff and customers to separate recyclables from general waste without needing to think twice during a busy service.

The practical advantages of using colour-coded billboards alongside a recycling station include:

• Clear visual prompts reduce contamination of recycling streams
• Colour coding supports staff training and reinforces sorting habits
• Helps sites meet waste segregation obligations more consistently
• Compatible with other Slim Jim Recycling Station toppers and labels
• Straightforward to fit without tools or specialist installation

This billboard is a straightforward add-on or replacement part for existing Slim Jim Recycling Stations. It is not a standalone product and requires a compatible Slim Jim Recycling Station to function as intended. If you are setting up a full recycling point from scratch, you will need the base station alongside the appropriate toppers and labels for each waste category.

Well suited to kitchens, canteens, staff rooms, and front-of-house areas where waste sorting is a compliance or sustainability requirement. Sites managing multiple waste streams will benefit from using the full range of colour-coded billboards across each station.

If you are unsure which combination of stations, toppers, and billboards best fits your site layout, the team is happy to help you work through it.

The Rubbermaid Slim Jim Recycling Station Billboard is a display panel designed to fit the Slim Jim Recycling Station, providing clear visual prompts at the point of waste disposal. The grey colourway is a neutral option that works alongside colour-coded toppers and waste stream labels to guide users toward the correct bin without requiring staff intervention each time.

In busy commercial environments — kitchens, front-of-house areas, staff canteens, and service corridors — waste sorting often breaks down simply because the expectation isn't clearly communicated at the bin itself. Placing a labelled billboard at eye level on the station removes that ambiguity and helps build consistent habits across a team, particularly where staff turnover is high or where multiple languages are in use.

• Supports correct waste segregation at the point of disposal
• Compatible with the Slim Jim Recycling Station range
• Works alongside colour-coded toppers and waste labels
• Helps reduce contamination across recycling streams
• Practical for kitchens, canteens, and front-of-house areas

This billboard is a relatively straightforward accessory, but getting waste segregation right has real operational value — reduced disposal costs, simpler compliance with waste duty of care requirements, and less time spent re-sorting contaminated recycling. It is worth confirming compatibility with your existing Slim Jim station configuration before ordering.

If you're specifying a full recycling setup or want guidance on toppers, labels, or station quantities for your site, the team is happy to help you work through the options.

The Rubbermaid Slim Jim Recycling Station Billboard is a colour-coded signage panel designed to attach to the Slim Jim Recycling Station unit. The brown version indicates organic or food waste streams, helping staff and visitors identify the correct bin at the point of disposal without ambiguity.

In busy commercial kitchens, canteens, and front-of-house areas, clear waste segregation is easy to overlook during service. A visible, colour-matched billboard reduces mis-sorting by making the correct disposal choice obvious at a glance, which in practice means less contamination across waste streams and fewer rejected recycling collections.

• Colour-coded brown panel to indicate the correct waste stream clearly
• Compatible with the Slim Jim Recycling Station for a unified, tidy appearance
• Helps reduce waste contamination and supports recycling compliance
• Suitable for kitchens, canteens, serveries, and front-of-house areas

This billboard is an accessory rather than a standalone product — it requires the corresponding Slim Jim Recycling Station to mount correctly. If you are building out a full waste segregation setup across multiple streams, it is worth confirming which toppers and billboard colours you need to cover each waste category before ordering.

Well suited to sites with waste segregation obligations, staff canteens, schools, care homes, and any operation looking to improve recycling compliance with minimal effort. If you are setting up a full station and are unsure which combination of components covers your waste streams, the team are happy to help you put the right kit together.

This is a replacement or additional swing lid designed to fit Rubbermaid Slim Jim waste containers. The slotted grey lid allows waste to be deposited quickly without removing the lid entirely, helping to keep waste contained and out of sight during service.

In a commercial environment, keeping waste receptacles covered is a basic hygiene requirement. This lid helps maintain a cleaner appearance at the point of disposal and reduces the likelihood of odours or pests becoming a problem — particularly relevant in front-of-house areas, serveries, and busy kitchen passes where open bins are not appropriate.

• Fits Rubbermaid Slim Jim container range for straightforward compatibility
• Slotted opening allows hands-free or single-handed waste disposal
• Closed lid design helps contain odours and maintain hygiene standards
• Grey colour suits general waste designation in colour-coded waste systems
• Simple drop-in fit with no fixings required

This is a straightforward accessory with no installation requirements. It is worth confirming compatibility with your existing Slim Jim container before ordering, as Rubbermaid produce several sizes within the range and lid fitment is size-specific.

Well suited to kitchens, cafés, and hospitality venues already running Slim Jim containers who need a spare or replacement lid. If you are setting up a waste management system from scratch or need guidance on container sizing for your operation, the team is happy to help point you in the right direction.

The Rubbermaid Slim Jim blue paper lid is a dedicated lid designed specifically for use with Slim Jim slim-profile waste containers. Made from polyethylene, it fits securely over the top of the bin and features slots to allow paper waste to be fed in without fully opening the lid, helping to keep waste contained and the bin tidy during service.

In a commercial kitchen or front-of-house environment, keeping waste streams separated is a practical necessity. The colour-coded blue lid makes it straightforward to designate a specific Slim Jim bin for paper waste, which supports basic waste segregation without any additional signage or labelling effort.

• Colour-coded blue for easy paper waste identification
• Slotted aperture keeps waste contained without removing the lid
• Polyethylene construction — durable and easy to wipe down
• Compatible with the Slim Jim bin range

This is a straightforward replacement or additional lid rather than a complex piece of equipment, but getting the right lid for the right bin matters — an ill-fitting lid creates more mess than no lid at all. If you're unsure which Slim Jim container size you have, or whether this lid is the correct match for your existing bins, feel free to get in touch and we can confirm compatibility before you order.