Counter and Surface Mount Cup Dispensers

The San Jamar C3400CF is a counter-mounted cup dispenser designed to hold and present 12 to 24oz cups at an angled position above the worktop. It is built for front-of-house beverage stations, self-service counters, and staffed service points where accessible, consistent cup dispensing is needed throughout the day. Construction is in 304 stainless steel, which holds up well in wet service environments and tolerates the cleaning routines typical of commercial counter use.

Where this model differs from simpler collar-style dispensers is the patented adjustable collar, which allows the unit to be set for different cup rim profiles without replacing any major components. Interchangeable springs let operators match dispensing tension to the cup material in use, which helps prevent jamming or double-dispensing during a busy service period — a common frustration with fixed-tension dispensers when cup stock changes between deliveries.

The main operational advantages are worth noting directly:

• Adjustable collar accommodates varying rim diameters across the 70–98mm range
• Interchangeable springs allow tension to be matched to cup weight and material
• Patented mounting ring fixes securely to the counter surface without under-counter support
• Angled orientation keeps cups within easy reach at the service point
• Stainless steel construction suits regular cleaning and damp counter environments

Installation requires no under-counter cavity. The mounting ring fixes to the counter surface and supports the dispenser tube above the worktop, which makes this a practical option where a fully recessed in-counter dispenser is not possible due to counter depth or construction. It is worth confirming cup compatibility before ordering, as not all cup profiles within the stated diameter range will dispense equally well with every spring combination.

This dispenser suits cafés, quick-service operations, canteens, and hospitality venues where a reliable, low-maintenance cup dispensing point is needed at counter level. For sites running very high cup volumes across multiple service points, a higher-capacity or in-counter alternative may be worth considering.

If you want to talk through cup compatibility or whether this unit suits your counter setup, the team is glad to help before you place an order.

The San Jamar C3400CH is a counter-mounted cup dispenser designed to hold and dispense 12 to 24oz cups in a horizontal orientation. It sits on or through a counter surface, keeping cups within easy reach at beverage service points without occupying open counter space. It is compatible with cups in the 70 to 98mm rim diameter range, which covers a broad range of standard paper and plastic cup sizes commonly used in cafés, self-service stations, and front-of-house catering environments.

The spring-loaded mechanism advances cups as each one is removed, delivering consistent single-cup dispensing without staff needing to handle the stack. In busier service periods this matters — fumbling with loose cups slows down the counter and undermines hygiene. Keeping the stack enclosed also limits dust exposure and incidental contact, which is a practical consideration at any front-of-house drinks point.

• Adjustable collar accommodates different cup profiles within the supported rim range
• Spring mechanism delivers clean, single-cup dispensing at pace
• Counter-mount installation keeps the drinks station tidy and cups consistently accessible
• Stainless steel construction withstands daily cleaning routines without deterioration
• Locking ring secures the unit firmly to the counter during busy service

Installation does not require specialist tools — the dispenser mounts to the counter surface and the locking ring holds it securely in place. Before ordering, it is worth confirming the rim diameter of your specific cups, as compatibility depends on this. The adjustable collar gives some flexibility within the stated range, but it will not bridge a significant mismatch. For operations running multiple beverage points at high volume, a wall-mounted or multi-tube arrangement may be worth considering instead.

This dispenser is well suited to small to medium cafés, hotel beverage counters, self-service drink stations, and catering setups where a tidy, accessible cup point is needed without a complex installation. If you are unsure whether it will work with your cup size or counter configuration, our team is happy to help you confirm before you order.

Paper cups can take up valuable counter space - using a Bonzer cup dispenser can keep cups tidy and out of sight in busy cafes.

The combination between spring tension and gasket has been carefully calibrated to allow only one cup to be released at a time.

With multiple compartments, it accommodates various cup sizes and lid types. From small espresso cups to XXXL, everything finds its spot.

The minimalist design seamlessly blends into any setting. Whether it's a traditional café or a modern leisure complex, the Bonzer holder adds a touch of elegance.

Simply wipe it down with a damp cloth to keep it looking pristine. No fuss, no hassle. It can even go in the dishwasher.

The San Jamar C2410SM EZ-Fit is a surface-mounted cup dispenser designed for front-of-house beverage stations, self-service areas, and staff canteens. It dispenses paper, plastic, and foam cups one at a time and is built around an interchangeable gasket system that lets operators adjust the unit to suit different cup rim diameters — without replacing the dispenser itself.

In active service environments, one-at-a-time dispensing reduces the handling and contamination risk that comes with open cup storage. This matters particularly in healthcare, hospitality, and high-footfall catering settings where hygiene standards are a practical concern rather than an afterthought. The gasket system earns its value in operations where cup stock changes over time — whether due to seasonal menu changes, a switch in cup supplier, or moving between drink formats. Four gaskets are included, covering a wide range of cup sizes within the supported rim diameter range.

• Interchangeable gasket system adjusts to different cup rim diameters without replacing the unit
• Dispenses paper, plastic, and foam cups cleanly one at a time
• Impact-resistant construction handles the wear of busy front-of-house areas
• Surface-mount fitting keeps counters clear and integrates neatly into drink stations
• No power connection required — simple wall or surface installation

Fitting is straightforward and requires no electrical connection. Before ordering, it is worth confirming that your current cup stock falls within the supported rim diameter range, and that the intended mounting surface is suitable for the fixing method. Very high-volume sites dispensing at significant pace through a long service may find a higher-capacity model more appropriate.

This dispenser is well suited to cafés, canteens, hotel beverage stations, and healthcare environments where a hygienic, tidy cup presentation is required and where cup stock varies enough to make gasket flexibility genuinely useful. It is a practical, cost-effective solution for operators who want to avoid maintaining multiple dispensers across changing cup sizes.

If you are unsure whether the gasket sizing matches your existing cup stock, or want to talk through mounting options, the team is glad to help you confirm before you commit to an order.

The San Jamar C3200EV is a vertical, surface-mounted dispenser for cups in the 6 to 10oz (180 to 300ml) range, with rim diameters of 56 to 81mm. It is built for fixed installation at beverage stations, self-service areas or behind counters, wherever you want cups presented cleanly and consistently through service. The body is 304 stainless steel, which stands up to regular cleaning and wipe-downs.

It suits moderate-volume sites where cups are drawn steadily rather than in rapid bursts. The adjustable collar is the key part: it is set to the rim diameter of the cup you use, which reduces the chance of several cups coming out at once or jamming. It is worth taking time to set the collar correctly for your cup stock during installation.

• Keeps cups enclosed and protected from handling contamination
• Frees up counter space compared with open cup stacking
• Single-cup dispensing reduces waste during busy service
• 304 stainless steel construction wipes clean quickly
• Vertical mounting keeps the footprint compact at the point of use

Fit it to a flat surface or wall with enough clearance to load cups from below. The dispenser is fixed in place, so choose a mounting position with refilling in mind, as an awkward location makes restocking slower than it needs to be. Check that your cup rim diameter falls within 56 to 81mm before ordering.

Suited to cafés, staff canteens, waiting areas and self-service beverage stations with moderate throughput. For higher-volume sites, larger cup formats, or where a freestanding or countertop unit is needed, another configuration may suit better.

If you are unsure whether this model fits your cups or setup, call 01304 827272 and we will help you work through the options.

The San Jamar C3400EF is a surface-mount foam cup dispenser designed to hold and dispense 12 to 24oz foam cups in a controlled, hygienic single-cup presentation. It is built from 26-gauge 304 stainless steel and intended for fixed installation in beverage service areas, whether that is a self-service station, a staffed counter, or an end-cap position.

In busy service environments, consistent cup dispensing matters more than it might seem. A poorly positioned or poorly sized dispenser leads to cups being grabbed in handfuls, contamination of the rim area, or cups jamming mid-service. The C3400EF addresses this with an adjustable collar that conforms to different cup diameters within the supported range, allowing the dispenser to be set correctly for the specific cup stock in use rather than relying on a one-size-fits-all fit.

The practical advantages of this unit include:

• Mounts horizontally, vertically or at a 45-degree angle to suit counter layout and access requirements
• Adjustable collar accommodates foam cup rim diameters across the 70-98mm range
• Stainless steel construction supports regular cleaning and resists corrosion in damp service areas
• Single-cup elevator dispensing reduces rim contamination and cup waste
• Suitable for under-counter, wall-mount or end-cap positions

Installation is straightforward, though it is worth noting that different spring sets are required depending on the mounting orientation chosen — horizontal, vertical and angled positions each use a different spring. This should be confirmed at the point of ordering if your installation position is already fixed. The unit is surface-mounted, so no internal cabinetry is needed, but the mounting surface must be stable enough to support the unit and a full column of cups without flex.

This dispenser is well suited to cafes, staff canteens, vending areas, hospitality back-bars and any site using foam cups in the 12-24oz range as their standard format. It is a single-sleeve unit, so sites with very high throughput or multiple cup sizes in simultaneous use may find a multi-sleeve or higher-capacity dispensing system more practical.

If you are unsure whether this unit suits your counter layout or cup specification, the team is happy to help you confirm the right fit before you order.

The San Jamar C3500CH is a horizontal counter-mount cup dispenser designed to handle large-format cups in the 32 to 46oz range, with rim diameters between 101 and 124mm. It mounts directly to the counter surface and presents cups horizontally, allowing staff or customers to draw a single cup cleanly without disturbing the remainder of the stack — a practical arrangement for any busy beverage service point.

In high-footfall environments, dispensing hygiene and speed matter equally. This unit keeps cups enclosed and protected from contact while remaining immediately accessible at point of service. The patented adjustable collar is a genuinely useful feature in operations where cup stock varies across suppliers or formats: rather than maintaining separate dispensers for each cup profile, the collar can be adjusted to suit the rim diameter in use, reducing the number of units required and saving time when stock changes. The locking mounting ring secures the dispenser to the counter without additional brackets, keeping the installation stable and tidy under constant use.

• Adjustable collar accommodates rim diameter variation without tool changes
• Locking mounting ring provides secure, self-supporting counter-level fitment
• Purpose-matched springs optimise the dispensing action for different cup types
• Stainless steel construction withstands daily use and regular cleaning regimes
• Horizontal cup presentation maintains hygiene and accessibility at point of service

Installation requires no electrical connection, plumbing, or ventilation. The unit mounts to the counter surface directly, so it is worth confirming that the counter material and thickness will accommodate the mounting ring securely before fitting. Cup stock should also be checked against the supported rim diameter range prior to ordering.

This dispenser is well suited to cafés, quick-service restaurants, staff canteens, and healthcare catering operations running a consistent volume of large-format cold or hot takeaway cups. Operations using smaller cup sizes, or requiring under-counter or in-counter configurations, will find alternative formats available within the San Jamar range.

If you would like to confirm compatibility with your current cup stock or discuss the best configuration for your service point, the team is glad to help before you commit to an order.

The San Jamar C3200CH is a horizontal counter-mount cup dispenser designed to hold and present 6 to 10oz cups at a fixed, accessible position on a beverage counter or service station. It mounts securely to the counter surface, keeps cups contained and hygienic, and delivers them one at a time through a spring-loaded mechanism. It is a straightforward, practical piece of equipment commonly found at café beverage counters, quick-service drink stations, and self-service points.

In a working service environment, having cups stored loose on a counter creates handling delays and hygiene risks. A mounted dispenser keeps the cup stack contained, presents each cup cleanly to staff or customers, and removes the fumbling that comes with grabbing from an open stack during a busy period. The adjustable collar on this model accommodates a range of cup rim diameters, which gives operators some flexibility if cup suppliers change or cup styles vary across the site.

• Adjustable collar fits different cup diameters within the supported range
• Spring-loaded delivery reduces double-dispensing during fast-paced service
• Counter-mount ring holds the unit firmly in place under repeated use
• Stainless steel construction is straightforward to clean and maintain
• Horizontal orientation suits counter runs where overhead clearance is limited

Installation requires no electrical connection or plumbing — the unit mounts directly to the counter surface. Before ordering, it is worth confirming that your cup rim diameter falls within the supported range and that a horizontal counter-mount orientation suits your counter layout. For environments with very high cup throughput or where an in-counter or wall-mounted configuration would work better, there are alternative mounting styles available.

This dispenser is well suited to cafés, beverage counters, canteens, and self-service areas handling moderate to steady cup volumes. If you are weighing up mounting options or want to confirm compatibility with your current cups, the team can help you work through it.

The San Jamar C3400EH is a horizontal surface-mounted cup dispenser designed to hold and dispense cups with rim diameters in the 70 to 98mm range, typically covering 12 to 24oz cups. It mounts flush to a counter surface or end-cap position, keeping a sleeve of cups protected, organised, and ready to pull without occupying the working surface above.

In practice, a well-positioned cup dispenser makes a noticeable difference to beverage station flow. Staff can retrieve a cup single-handed with a clean, consistent pull rather than lifting from a loose stack — a small efficiency that compounds quickly when queues build. The horizontal orientation keeps the unit low-profile, and the adjustable collar allows the dispenser to be set correctly for the cup in use rather than relying on a fixed-size fit.

• Adjustable collar sized for cups with rim diameters between 70 and 98mm
• Horizontal surface-mount format keeps cups at counter level without overhead reach
• Stainless steel construction handles the cleaning demands of a commercial environment
• Enclosed sleeve protects stacked cups from contamination between service periods
• Compatible with counter, wall, or end-cap mounting depending on station layout

Installation requires no cutting or recessing — the unit is surface-fixed, which makes it straightforward to position and reposition as layouts change. It is worth confirming your cup rim diameter before ordering; cups outside the 70 to 98mm working range will not dispense cleanly, and cup sizing does vary between suppliers. The unit is intended for dry counter environments and is not suited to wet or refrigerated applications.

This dispenser is well suited to cafés, fast-casual operations, self-service beverage counters, and staff canteens running a single cup size or a narrow range within the collar's working span. Operations that regularly switch between several cup sizes may find separate units per size, or a multi-sleeve dispenser, a more practical arrangement.

If you want to confirm the collar range works with your current cup supplier before committing, the team is glad to help you check.

The San Jamar C3400EV is a vertical, surface-mounted dispenser for cups in the 12 to 24oz (350 to 710ml) range, with rim diameters of 70 to 98mm. It mounts to a wall, under a counter or at the end of a beverage station, which frees up worktop space and keeps cups within reach at the point of use. The body is 304 stainless steel, which copes well with the damp, busy conditions around drinks stations.

Cups are presented one at a time, so staff and customers are less likely to pull out several at once. In a high-footfall operation that saves a surprising amount of waste. The adjustable collar can be set for different rim diameters within the supported range, so one unit suits a station that handles more than one cup size.

• Surface-mount design keeps counters clear and cups close to hand
• Adjustable collar fits cup rim diameters from 70 to 98mm
• 304 stainless steel construction wipes clean quickly and stands up to daily service
• One-at-a-time dispensing cuts down on over-grabbing and wasted cups
• No power or water connection needed, mounts with standard fixings

Check your cup rim diameter falls within 70 to 98mm before ordering, as the collar adjustment has limits. Mounting height matters too: whether staff or customers use the dispenser will affect where it sits most comfortably on the wall or counter end.

Suited to cafés, canteens, hotel beverage points and self-service areas serving hot or cold drinks. For much higher volumes, or where a recessed installation is needed, a different format may suit better.

If you'd like us to check your cup specification against this unit before you order, call 01304 827272 and we'll confirm the fit.

The San Jamar C2210SM is a wall-mounted cup dispenser designed for self-service and counter-service beverage stations. It dispenses cups one at a time from a protected stack, keeping them hygienic and accessible without cluttering the worktop. The unit accepts paper, plastic and foam cups across a 73–94mm rim diameter range, which covers a broad spread of standard cup formats commonly used in hospitality and catering.

The EZ-Fit system is the practical detail that separates this model from fixed-size dispensers. Four interchangeable pre-cut gaskets are included, allowing the same unit to be reconfigured for different cup sizes within the compatible range. For operations where cup format varies by drink type, or where supply chain changes occasionally mean switching brands, this removes the cost and inconvenience of buying an additional dispenser. Fitting a new gasket is straightforward and requires no tools.

In service, the dispenser suits steady-flow environments well — staff canteens, coffee stations, waiting areas and self-service counters where cups are needed consistently but volume is moderate rather than high. The impact-resistant plastic construction holds up reliably in busy service areas without requiring maintenance.

• EZ-Fit gasket system allows cup size changes without replacing the dispenser
• Single-cup dispensing keeps the stack hygienic and reduces casual waste
• Surface-mount design clears the counter for other equipment
• Compatible with paper, plastic and foam cups across a practical size range
• No power or water connection required — simple to fit and reposition

Installation requires only a suitable vertical surface. There are no electrical or water connections involved. Before ordering, it is worth confirming that your cup stock falls within the 73–94mm rim diameter range, as cups outside this tolerance will not dispense reliably.

This dispenser is well suited to low- to mid-volume sites. Operations with significantly higher throughput, or those needing a larger cup capacity in a single unit, may be better served by a higher-capacity model from the same range.

If you're fitting out a beverage station and want to talk through which dispenser configuration works for your cup stock and service setup, the team is glad to point you in the right direction.

The San Jamar C3200EF is a surface-mount foam cup dispenser designed to accept 6 to 10oz foam cups with rim diameters in the 56–81mm range. It dispenses one cup at a time via an elevator mechanism, presenting the next cup cleanly at the opening and keeping the remainder protected within the tube. The unit is constructed from 26-gauge 304 stainless steel, giving it the durability expected in a busy front-of-house or self-service environment.

Where this dispenser earns its place is in speed-of-service situations — hot drink stations, self-serve beverage counters, waiting areas, and staff refreshment points — where staff or customers need to retrieve a cup cleanly and quickly without handling the stack below. The adjustable collar accommodates different cup sizes within the supported range, so operators do not need a separate dispenser for every cup specification they run.

A practical feature is the mounting flexibility. The C3200EF can be installed horizontally, vertically, or at a 45° angle, with the appropriate spring supplied for each orientation. This makes it adaptable to under-counter, wall, or end-panel positions — useful where counter space is limited or where a clean, built-in look is preferred. Key operational benefits include:

• Single-cup dispensing keeps the remaining stack hygienic and untouched
• Adjustable collar adapts to cup sizes within the supported range
• Three mounting orientations give installation flexibility in tight spaces
• Stainless steel construction is straightforward to wipe down and maintain

Installation requires only a flat surface or panel suitable for the fixing method chosen. No plumbing, electrical connection, or ventilation is needed. It is worth confirming your cup rim diameter against the 56–81mm specification before ordering, as the dispenser is designed for foam cups only and will not function correctly with paper or plastic alternatives.

This dispenser is well suited to cafés, canteens, hospital refreshment points, office kitchens, and any self-serve station running foam cups in the 6–10oz range. For sites dispensing larger cup formats or requiring a countertop-mounted or undercounter recessed solution, other configurations in the San Jamar range may be more appropriate.

If you are fitting out a beverage station and want to make sure the dispenser suits your cup specification and installation position, the team is happy to talk it through before you order.

The San Jamar C3400CV is a vertical counter-mount cup dispenser designed for fixed beverage stations in front-of-house and back-of-house environments. It fits through a cut-out in the counter surface, holds a vertical stack of cups, and presents a single cup at a time for clean, one-handed dispensing. The adjustable collar accommodates cups in the 12 to 24oz range across a broad rim diameter span, making it a practical choice where cup stock occasionally varies between suppliers.

In a busy service environment, the value of a well-positioned cup dispenser is easy to underestimate. Cups stay enclosed and protected from dust and handling until drawn, staff and customers can take a single cup without disturbing the rest of the stack, and the counter-mount position keeps the service point tidy and the unit stable under repeated use. The adjustable collar also means the dispenser can adapt within the compatible size range without needing to be replaced when cup specifications change.

• Hygienic enclosed dispensing reduces contamination risk at the service point
• Single-cup delivery avoids fumbling and reduces cup waste during busy service
• Adjustable collar adapts to different cup profiles within the compatible range
• Stainless steel construction withstands regular cleaning without deteriorating
• Counter-mount fixing keeps the unit stable and the surface uncluttered

Installation requires a hole cut into the counter to accept the mounting ring. Once fitted, the unit locks in place and is self-supporting, making this a permanent or semi-permanent installation rather than a portable surface unit. It is well suited to fixed beverage points, not temporary or mobile setups. Before ordering, it is worth confirming that your cups fall within the 70 to 98mm rim diameter range, as cups outside this specification will not dispense reliably.

This dispenser works well in cafés, canteens, quick-service restaurants, and similar operations running a staffed or self-serve beverage station with consistent cup throughput. For sites dispensing very high volumes or using significantly larger cups, a higher-capacity format may be worth considering instead.

If you want to check that your current cup specification is compatible before committing, the team is glad to help you work it out.

The San Jamar C3500CF is an in-counter cup dispenser designed to hold and dispense large-format cups with a rim diameter of 101 to 124mm. It mounts into a counter cut-out and presents cups at an angle, allowing staff to retrieve a single cup cleanly with one hand without breaking stride — a small but meaningful advantage during a busy service period.

Cup dispensing is one of those functional details that rarely gets attention until something goes wrong. A dispenser that allows cups to jam, drop, or nest badly creates friction at the point of service and slows throughput. The C3500CF uses a patented adjustable collar that conforms to the cup in use and a locking mounting ring that holds the unit securely within the counter without requiring additional support. Interchangeable springs allow the dispenser to be matched to different cup types, which helps maintain consistent feed even as cup stock varies between deliveries.

• Adjustable collar conforms to cup dimensions without tools
• Locking mounting ring provides a stable, self-supporting counter fit
• Angled presentation supports smooth one-handed retrieval at pace
• Interchangeable springs matched to cup type for consistent dispensing
• Stainless steel construction resists corrosion in wet service areas

Installation requires a counter cut-out of the correct diameter. This unit is designed solely for in-counter use and is not suitable for surface or wall mounting. It is a practical choice for self-service beverage counters, café service lines, fast-casual restaurants, and staff canteens where a fixed, tidy dispensing point is preferred over a loose cup stack.

This model works best where a single cup size in the 101 to 124mm rim range is used consistently. Operations dispensing several cup formats, or very high-volume venues cycling through large quantities of cups rapidly, may find a different configuration from the wider range more appropriate.

If you are working out which cup dispenser suits your counter layout or cup specification, we are happy to help you get that right before you order.