Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Welcome to Advantage Catering Equipment
Your cart
-
Refrigeration
-
Food Preparation
-
Food Servery & Display
-
Warewashing & Laundry
-
Sinks, Tables & Storage
Drawer menu
-
Cooking
-
Refrigeration
-
Food Preparation
-
Food Servery & Display
-
Beverage Machines
-
Warewashing & Laundry
-
Sinks, Tables & Storage
-
Kitchenware
-
Front of House
Food Holding & Warming
Food holding and warming equipment keeps cooked food hot, safe and ready to serve between the pass and the plate.
Shop by category
All categories
More categories
- Cook & Hold Ovens (20)
- Heated Banquet Cabinets (8)
- Food Warmers (30)
337 products
337 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
£846.00(£1,015.20 inc VAT)
The Lincat PLH90 Panther is a floor-standing, plain-top static hot cupboard designed to hold plates and plated meals at the correct service temperature throughout a busy pass. Part of Lincat's well-established Panther range, it is a straightforward, robustly built unit intended for continuous daily use in a commercial kitchen environment.
A hot cupboard at the pass earns its keep by keeping service moving consistently from the first cover to the last. The PLH90's thermostatically controlled interior allows temperature to be set and held reliably, which matters most when service stretches over a long sitting or plate volume builds during a peak period. Full insulation throughout the cabinet helps the unit retain heat without drawing more energy than necessary, which keeps running costs measured across a full service week.
Day-to-day operational advantages include:
- Consistent thermostatic control to suit different plate types and service requirements
- Full insulation supporting stable internal temperatures and a lower energy draw
- Plain top providing a practical working surface at the pass
- Robust construction suited to continuous use across a demanding service schedule
- A straightforward interior that cleans down without difficulty at the end of service
As a static, floor-standing unit, the PLH90 requires a fixed position within the kitchen layout and a mains electrical supply. Adequate clearance around the cabinet is needed for safe daily operation. It is worth confirming available floor space and your pass configuration before ordering, particularly where the pass is already compact.
This model is well suited to restaurants, hotel kitchens, and pub operations running a steady plate volume through service. It sits comfortably in the mid-range of Lincat's hot cupboard offering. Sites handling significantly higher plate throughput, or operations that need mobile hot holding flexibility, may find a higher-capacity or differently configured model better matched to their requirements.
If you would like to talk through whether the PLH90 fits your pass layout and service volumes, the team is happy to help you work it out before you commit.
£1,805.00(£2,166.00 inc VAT)
The Lincat P8P4 Panther is a mobile hot cupboard designed to hold plated meals and warmed crockery at service temperature. Mounted on four heavy-duty castors, it can be repositioned within a kitchen, moved to a servery, or wheeled through to a function room as service demands shift. Double sliding doors and two height-adjustable internal shelves allow the interior to be configured around different plate sizes and service styles.
Where the Panther differs from passively heated alternatives is its fan-assisted heat circulation. The fan distributes warmth evenly across all shelf levels, which becomes noticeable when the unit is fully loaded during a busy service and the doors are being opened repeatedly. Temperature consistency is more reliable under those conditions, and recovery after door opening is quicker than in convection-only units.
In practical terms, the unit earns its keep wherever flexibility is part of the workflow — hotels managing banqueting service, restaurants covering multiple dining areas, or any operation where plated food needs to be held at more than one point during a sitting.
- Fan-assisted circulation maintains even heat distribution across all shelf positions
- Height-adjustable shelves accommodate varying plate and dish sizes
- Double sliding doors allow rapid access with minimal heat loss during service
- Heavy-duty castors enable repositioning between service points or function spaces
- Robust construction suited to regular daily use in a commercial environment
The unit is electrically powered, so a suitable outlet is needed wherever it will be stationed. Because it moves around, it is worth checking cable reach against your intended positions before settling on a final location — a straightforward consideration that is easy to miss until installation day.
The P8P4 is well matched to mid-volume restaurant and hospitality operations. For high-volume banqueting or production kitchens with greater holding demands, a larger-capacity model may be worth considering. If you are unsure whether this unit suits your service volumes or layout, we are happy to talk it through.
£335.00(£402.00 inc VAT)
The Lincat LBM2 is a countertop dry heat bain marie designed to hold pre-cooked foods at consistent serving temperatures throughout service. Instead of a water bath, it uses dry radiant heat from below to keep pans at the correct holding temperature — a simple, reliable approach that works well for sauces, soups, gravies and stews. The unit comes supplied with four quarter-gastronorm pans, each 100mm deep with lids, so it is ready to put to work straight away.
In a working kitchen, removing the water well from the equation has real practical value. There is no water to fill before service and nothing to drain at the end of it. Setup and breakdown are faster, spillage risk when repositioning the unit is lower, and the adjustable thermostat means operators can dial in the right holding temperature for different foods — useful where some dishes are more sensitive to prolonged heat than others.
The practical case for this unit at a glance:
- No water connections — faster setup and simpler end-of-service breakdown
- Lower spillage risk when moving between positions or sites
- Adjustable thermostat allows temperature to be matched to food type
- Supplied with four lidded quarter-GN pans, ready to use immediately
- Compact footprint suits pass areas, buffet counters and serveries
The LBM2 plugs into a standard mains supply and sits on a stable countertop — there are no water or drainage connections to arrange, which keeps installation straightforward. It is worth being clear about the nature of dry heat holding: this is not a reheating unit. Food should already be at serving temperature before it goes in. For dishes that are prone to drying out under prolonged heat, or for kitchens running extended services where moisture retention matters, a wet well bain marie is worth comparing. Similarly, sites needing to hold a greater number of pans simultaneously may find a higher-capacity unit a better match.
This model is well suited to smaller operations — cafés, pub kitchens, school canteens and similar environments where a compact, easy-to-manage holding solution is needed at the pass or on a buffet counter.
If you are weighing up whether dry heat or wet well is the right approach for your service, we are happy to talk it through before you commit.
£539.00(£646.80 inc VAT)
The Lincat BM7W is an electric wet heat bain marie designed to hold prepared foods at safe serving temperatures throughout a service period. Rather than relying on dry radiant heat, the unit maintains warmth through a moist heated water bath, which keeps food in better condition over time. This matters most with soups, gravies, sauces, and pre-cooked vegetables, where surface drying or crusting during holding would compromise what reaches the customer.
In a working kitchen, the advantage of wet heat holding is the gentle, even warmth it delivers across the well. Dry alternatives can create uneven hot spots that gradually degrade texture and appearance. The adjustable temperature control allows operators to match holding conditions to the product being served, which is particularly useful where different items are being held simultaneously across a service.
- Moist heat environment preserves texture and appearance in held foods
- Adjustable temperature control suits a range of food types and service styles
- Compact countertop footprint fits pass-through and servery positions
- Compatible with standard GN pans, available separately
- Straightforward to drain and clean down between services
The BM7W is supplied as a base unit only, so pan selection should be considered before ordering to avoid any delay when the unit arrives. GN pan kits are available to suit different menu configurations. The unit requires a standard electrical connection and sits on a countertop, making installation straightforward — though it should be positioned where the temperature control remains accessible during a busy service.
This unit is well suited to smaller restaurants, pub kitchens, cafés, and staff catering operations that need dependable food holding across a service period without committing to a large footprint. Operations holding a greater number of dishes simultaneously, or running longer high-volume services, may find a higher-capacity unit more appropriate.
If you are working out which pan configuration suits your menu or want to confirm this unit is the right fit for your service volume, the team is happy to talk it through with you.
£1,390.00(£1,668.00 inc VAT)
The Lincat P6P3 Panther Slim is a mobile hot cupboard designed to hold plated meals and warm plates at service temperature. Its reduced depth distinguishes it from standard-depth units, making it a practical choice for tighter service corridors, narrow pass areas, and function rooms where a full-depth cabinet would obstruct staff movement or create a flow problem. The castored base means the unit can be repositioned as service requirements change, rather than committing to a fixed location.
Fan-assisted heat circulation distributes warmth evenly throughout the interior, which becomes particularly important during extended service when the doors are opened and closed repeatedly. Without consistent air movement, temperature variation between shelf levels can lead to unevenness at the pass — something that affects plated service quality in any busy operation. Two height-adjustable internal shelves offer flexibility around different plate sizes or service configurations, and the sliding door design allows quick access without doors swinging into adjacent staff or equipment.
The key operational advantages this unit offers are:
- Mobile on castors — can be repositioned between service areas or function rooms
- Slimline footprint reduces the impact on pass space and service corridors
- Fan-assisted circulation keeps temperatures consistent across both shelf levels
- Sliding doors give clean access without encroaching on adjacent workspace
- No fixed installation required, making it straightforward to redeploy
The unit requires a standard mains electrical connection. As it is mobile rather than fixed, no hard installation is needed, but it is worth checking floor surfaces, thresholds, and any ramps before placing it in service. It is also worth noting that this is a holding unit, not a cook-and-hold cabinet — food should reach the correct temperature before loading, as the P6P3 is designed to maintain temperature rather than raise it.
This unit is well suited to restaurants, hotels, and function caterers with moderate cover volumes who need reliable, flexible hot holding without a permanent fixture. For larger banqueting operations or central production kitchens with higher throughput demands, a heavier-duty model from the broader range may be a better fit.
If you would like to talk through whether this unit suits your service setup or how it works alongside existing pass equipment, the team is happy to help.
£522.00(£626.40 inc VAT)
The Parry 1869 is a freestanding, double door electric plate warmer built for commercial service. It holds crockery across three chrome wire shelves and uses thermostatic control to maintain a consistent plate temperature throughout a shift. There are no complicated controls or secondary functions — it is designed to do one job reliably, service after service.
Cold plates are a recurring problem in working kitchens and a common source of complaints from front-of-house staff and diners alike. A properly loaded plate warmer keeps crockery at the right temperature so food does not lose heat between the pass and the table. During a busy lunch or dinner service, having a steady supply of warm plates removes a pressure point that would otherwise slow the flow of covers. The Parry 1869 handles that role well in moderate-volume operations where plate temperature consistency matters and floor space is limited.
Practical day-to-day advantages include:
- Thermostatic control keeps plates at a safe, consistent temperature throughout service
- Double door configuration works well against a wall or within an equipment run
- Chrome wire shelves remove easily for cleaning between services
- Simple controls reduce the risk of misuse under service pressure
- No water connection or specialist ventilation required
Installation is straightforward. The unit runs on a standard electrical supply with no water feed or ventilation work needed. It is a floor-standing cabinet, so it is worth confirming available floor space and checking door swing clearance before ordering. Positioning relative to the pass or service station will make a practical difference to workflow.
The Parry 1869 is well suited to small and mid-sized restaurants, cafés, bistros, and hospitality venues running a single service station. For higher-volume operations with a larger plate count in circulation, a higher-capacity warmer with additional shelving may be a more practical fit. Parry has manufactured commercial catering equipment in the UK since 1943, and their plate warmers are a familiar and dependable presence in independent and contract catering kitchens.
If you would like to talk through whether this model suits your service volume or kitchen layout, the team is glad to help before you commit.
£2,020.00(£2,424.00 inc VAT)
The Lincat P8P5 Panther is a mobile hot cupboard designed to hold plated meals at safe serving temperatures and to keep pre-warmed plates ready at the pass. It moves on heavy-duty castors, making it straightforward to reposition between service areas, shift between sittings, or store clear of the working floor when not needed — a practical consideration in kitchens where space and workflow demands change through the day.
What separates the P8P5 from passively heated alternatives is its fan-assisted heat circulation. The fan distributes warm air evenly throughout the interior, reducing the risk of hot spots and helping the cabinet recover temperature quickly after the doors have been opened during a busy service. For operations running extended service periods or banqueting events, that consistency in holding temperature makes a meaningful difference to food quality at the point of service.
From a day-to-day operational standpoint, the unit is practical to work with:
- Two height-adjustable internal shelves accommodate different plate sizes and stack depths
- Double sliding doors allow access from either side without interrupting service flow
- Locking castors hold the unit stable once positioned at the pass or service point
- Fan-assisted heating maintains even temperature throughout the cabinet interior
- Robust construction suited to the regular demands of commercial service
Installation is straightforward. The P8P5 runs on electricity — there is no gas supply, fixed water connection, or specialist ventilation required. It should be positioned on a level surface with adequate clearance around the unit, and it is worth confirming the available socket circuit is appropriate before first use.
This unit is well suited to restaurants, hotels, pub kitchens, and banqueting operations where plated meals need to be held ahead of service or plates must be kept warm at the pass. For higher-volume sites that require greater holding capacity, there are more substantial options in the hot cupboard range worth considering alongside this model.
If you are weighing up whether the P8P5 fits your service setup, the team is glad to talk it through with you before you commit.
£1,445.00(£1,734.00 inc VAT)
The Spidocook Caldolux is a static cook and hold oven designed for low-temperature cooking followed by an extended holding phase. It operates as a single continuous cycle — cooking at controlled temperatures up to 120°C, then transitioning automatically into a gentle hold at up to 100°C. The unit accommodates three 1/1 GN trays, making it practical for batch preparation of proteins, roasts, and temperature-sensitive dishes where consistency and yield matter.
In a working kitchen, the Caldolux earns its place most clearly with overnight or extended cook cycles. Joints of meat loaded in the evening can be cooked low and slow through the night and held at safe serving temperatures ready for the lunch or dinner service — with minimal staff intervention. Because the oven cooks at lower temperatures than a conventional convection oven, shrinkage is reduced and moisture retention improves, which has a direct effect on food yield and portion consistency across a busy service period.
The practical advantages this brings to a kitchen operation include:
- Reduced active cooking time during peak service — product is ready and held
- Improved yield from expensive protein cuts through low-temperature method
- Consistent, repeatable results between services and between staff
- Frees up conventional oven capacity during service
- Digital controls allow simple temperature and time programming
Installation is straightforward — the unit runs from a standard 13A supply and requires no specialist gas or ventilation connection. Its compact footprint means it will sit comfortably on a counter or on a suitable stand. At 21kg it can be repositioned without difficulty, though it should be placed on a stable, heat-resistant surface with reasonable clearance at the rear and sides.
The Caldolux is best suited to smaller restaurants, pub kitchens, hotel operations, and catering businesses where extended low-temperature cooking is part of the regular workflow. It is particularly well matched to operations that cook ahead and want to hold product safely through a service period rather than cooking to order. For sites with significantly higher batch volumes or a need to run multiple simultaneous cycles, a higher-capacity model would be worth considering.
If you are unsure whether this unit fits your kitchen's throughput or workflow, our team is happy to talk through the options with you before you commit.
£1,752.00(£2,102.40 inc VAT)
The Parry HOT15BM is a 1500mm wide mobile hot cupboard with an integrated bain marie top, combining two functions that would otherwise require separate pieces of equipment at the pass. The cupboard section holds plates and plated meals at a consistent service temperature throughout the sitting, while the bain marie top keeps gastronorm pans of sauces, gravies, soups, and portioned dishes warm and ready to serve. Gastronorm pans are not supplied as standard.
In a working kitchen, having both hot holding and wet food holding in a single floor-standing unit makes a genuine difference to how a pass operates. The thermostatically regulated interior holds a stable temperature across extended service periods, which matters when you are running multiple covers or holding meals while a table is seated. The bain marie top accepts full-size gastronorm pans or combinations of smaller sizes, so pass staff can adjust quickly to the day's menu without reorganising the service counter.
The unit is well considered for the demands of regular kitchen use:
- Perforated internal shelves supplied in three sections per tier, making removal and cleaning straightforward
- Double-skinned, fully removable doors simplify cleaning at the end of service
- Four castors — two lockable — allow precise positioning at the pass and hold the unit firmly during service
Because the unit is mobile, there is no fixed installation required. It runs from a standard electrical connection with no gas supply needed. The bain marie top requires a water fill before each service. The 1500mm footprint is substantial, and it is worth measuring your pass or servery space carefully before ordering — this is particularly relevant in tighter kitchen layouts where every metre counts.
This unit is well suited to restaurants, hotels, and banqueting operations that have an established pass position and a regular requirement for both plate warming and wet food holding at volume. Smaller operations with more modest throughput may find a narrower model a more proportionate fit for their needs. For very high-volume sites — large banqueting events or venues running several busy sittings back to back — it is worth considering whether a higher-capacity alternative would serve better in the long term.
If you would like to talk through how this unit would fit your service layout and volume before committing, the team is always glad to help you work through it.
£2,490.00(£2,988.00 inc VAT)
The Blue Seal Turbofan H8D-UC is a compact undercounter hot holding cabinet designed to keep prepared food at safe serving temperatures throughout a service period. It holds up to eight full-size gastronorm trays and is built to sit beneath a standard counter bench, either as a standalone holding unit or paired directly beneath a Turbofan E33 convection oven as part of an integrated cooking and holding system.
In a working kitchen, the H8D-UC earns its place by keeping food consistent and service-ready without consuming worktop space. The low-velocity circulation fan distributes warmth evenly across the cabinet without drying out food — a common frustration with holding equipment that relies on static heat alone. Digital controls give operators clear visibility of temperature and elapsed holding time, and three independent hold timers allow different menu items to be tracked simultaneously, which is genuinely useful during a busy service when multiple dishes are being held at once.
For kitchen teams, the practical advantages are straightforward:
- Frees oven and worktop space during service without compromising food quality
- Three independent timers allow simultaneous tracking of different menu items
- Low-velocity fan maintains moisture balance and reduces surface drying
- Compact undercounter footprint suits kitchens where space is limited
- Continuous door seal supports consistent temperatures throughout service
Installation is uncomplicated — the unit runs from a standard 13A plug connection with no dedicated electrical supply, gas, or water connections required. It fits beneath a standard counter bench height and double-skin construction helps keep exterior surfaces at a safe temperature during operation. Ventilation requirements are minimal, making it straightforward to position within an existing kitchen layout.
This cabinet is well suited to cafés, small to mid-sized restaurants, contract catering operations, and workplace or school canteens where a reliable, compact holding solution is needed without the footprint of a floor-standing unit. It works particularly well in kitchens already running a Turbofan E33 oven, where the two units function together as a matched system. For higher-volume sites holding larger quantities across multiple service lines, a greater-capacity unit may be worth considering.
If you'd like to talk through whether this cabinet fits your service volumes or existing bench configuration, our team is glad to help before you commit to an order.
£480.00(£576.00 inc VAT)
The Lincat BS7 is a countertop dry heat bain marie supplied with six stainless steel round pots. Rather than using a water-filled well, it relies on radiant heat to hold food at serving temperature throughout a service period. It is well suited to holding sauces, gravies, soups and pre-cooked toppings where a compact, practical solution is needed at the point of service.
In busy service conditions, the absence of a water well is a genuine operational advantage. There is no water level to monitor, no risk of spillage when repositioning the unit, and no well to drain and dry at the end of a shift. The adjustable heat control allows operators to moderate temperature across different food types, which is useful when holding items with varying heat tolerances over extended periods.
From a day-to-day standpoint, the BS7 offers several practical advantages:
- No water to fill, monitor or drain — simpler to manage during service
- Six individual pots allow multiple food types to be held simultaneously
- Removable pots make cleaning between services more straightforward
- Easier to reposition on a counter or servery without spillage risk
- Lower energy draw compared with heating a water-filled wet well equivalent
The BS7 runs on a standard electrical supply and is designed for countertop servery use. It requires adequate clearance around the unit for ventilation. It is not intended for high-throughput production environments. Operations that need to hold a larger number of food types at once, or require greater total capacity, should consider whether a larger unit or a wet well alternative would better suit their service volumes.
The BS7 is commonly found in pub kitchens, hotel serveries, restaurants and catering operations where a reliable, no-fuss holding unit is needed close to the pass. Lincat has a long-established track record in commercial food holding equipment in the UK.
If you are unsure whether a dry heat unit fits your service style or want to talk through capacity for your operation, we are happy to help.
£222.00(£266.40 inc VAT)
The Lincat LRBW is a single-pot wet heat bain marie designed to hold pre-cooked food at safe serving temperatures throughout a service period. It uses water heated beneath a round stainless steel pot to transfer heat gently and evenly from the outside in — a method that keeps food in consistently good condition without the surface drying or crusting that can occur with dry heat alternatives.
Wet heat holding is generally the preferred approach where food quality needs to be maintained across an extended service. Sauces, gravies, soups, and vegetables all respond well to a moist heat environment — texture stays consistent, appearance remains presentable, and food is ready to plate directly from the unit without rework. The adjustable temperature control allows operators to dial in an appropriate holding temperature for the food type in use and to keep within food safety requirements throughout the shift.
From a practical standpoint, this format offers several day-to-day advantages:
- Moist heat environment protects texture and appearance of sauces, soups, and vegetables
- Adjustable temperature control supports safe holding across a full service
- Stainless steel pot and construction cleans down quickly between services
- Compact footprint suits counter and servery positions with limited space
- Electric connection keeps installation simple with no gas or water supply required
As an electric unit, the installation requirements are straightforward — a suitable mains supply and a stable, level surface are the main considerations. It is worth noting that wet heat units do use slightly more energy than dry heat alternatives, since water must be heated and maintained throughout service. For operations running the unit across long back-to-back shifts, that running cost is a reasonable factor to weigh when choosing between formats.
This unit is well suited to smaller operations — cafés, pub kitchens, small restaurants, or catering functions — where a single pot of sauce, soup, or a side dish needs to be held reliably through service. Where an operation requires holding several food types simultaneously or is running a high-throughput service, a multi-well or larger-capacity unit is likely to be a better fit.
If you are weighing up wet heat versus dry heat holding for your menu, or want to talk through whether a single-pot unit covers your service requirements, the team is happy to help you work it out before you commit.
£437.00(£524.40 inc VAT)
The Parry 1868 is a freestanding single door electric plate warmer designed to hold crockery at a consistent service temperature throughout the shift. The short cabinet format distinguishes it from full-height models — it is proportioned specifically for kitchens where back-of-house floor space is limited, or where a counter-top position is more practical than a floor-standing unit.
In a working kitchen, plate temperature has a direct effect on food quality at the pass. Cold crockery draws heat from plated dishes within seconds, which undermines the finished plate regardless of how well the food has been prepared. A dedicated plate warmer removes that risk without occupying oven capacity or placing any additional demand on the team during service. The thermostatic control holds a steady temperature suited to your crockery stock and, once set, requires very little day-to-day adjustment.
The practical advantages for daily operation include:
- Consistent plate temperature maintained throughout the full service period
- Frees oven capacity that would otherwise be used to warm crockery
- Chrome wire shelves promote even air circulation around stacked plates
- Thermostatic control is simple for any member of the team to manage
- Short cabinet height suits counter-top placement in tighter kitchen layouts
Installation is straightforward — the unit runs from a standard mains electrical connection and requires no specialist commissioning. Before ordering, it is worth confirming that the door hinge orientation suits your layout and that the footprint allows the door to open freely in your available space.
This model is well suited to smaller restaurants, cafés, bistros, and pub kitchens running moderate covers where crockery volume is manageable within a single-door cabinet. Sites running higher covers or holding larger crockery stocks may find a taller or multi-door unit a more practical fit. If you are unsure which capacity makes sense for your service pattern, the team is happy to talk it through.
£1,233.00(£1,479.60 inc VAT)
The Victor HC21MS is a British-made mobile hot cupboard from the Countess Junior range. It combines a flat top serving surface with an enclosed hot holding compartment below, designed to keep plated meals or stacked crockery at temperature during service. The unit runs from a standard plug connection and requires no fixed installation, making it straightforward to position wherever it is needed at any given service.
In a working kitchen, this type of unit earns its place during service periods where plated meals need to be held between the pass and the dining room. The flat top provides a practical surface for additional plates or covers, while the interior maintains consistent holding temperatures throughout a busy sitting. Recovery after door opening is reliable enough for continuous use at moderate service volumes, though operations running very high covers over an extended service should consider a larger capacity model.
The design reflects real operational priorities:
- Double-skinned stainless steel construction keeps the exterior cool to the touch, reducing burn risk in tight service areas
- Top-hung sliding doors with no front-edge dirt traps make end-of-service cleaning straightforward
- Removable shelves, support sets, and element cover reduce the effort involved in thorough cleaning
- Radius corners to the satin-finish interior help prevent the build-up that square corners tend to collect
- Digital temperature display allows quick visual checks without opening the doors
Mobility is provided by four swivel castors, two of which are braked, along with a robust push-pull handle. A curly power cable with a plug park keeps the cable managed when the unit is not in use — a practical detail in kitchens where trailing cables create hazards. No dedicated electrical installation is required; a suitable socket in a safe position for the cable run is sufficient.
The HC21MS is well suited to restaurants, hotel dining operations, staff canteens, and educational catering where a practical mobile holding solution is needed without committing to fixed counter infrastructure. It is not intended for very high-volume banqueting environments, where a larger, heavier-duty unit would be more appropriate. If your operation is smaller or more static, lower-capacity options are available within the range.
If you would like to talk through whether this unit fits your service volume or kitchen layout, the team at Advantage Catering Equipment is happy to help before you commit.
£473.00(£567.60 inc VAT)
The Parry NPWB4 is a countertop electric bain marie that uses a wet well heating method. Water heated within the unit transfers gentle, moist heat to the four round pots sitting above it, with thermostatic control allowing operators to set and hold a consistent serving temperature throughout service.
The wet well approach is particularly well suited to foods that are vulnerable to surface drying during extended holding. Vegetables hold their colour, texture, and moisture more reliably under moist heat than they would in a dry well unit — a difference that becomes clearly apparent over a long carvery lunch or dinner service. This is one of the main reasons operators running pub kitchens, carvery counters, and school canteens tend to favour this configuration for vegetables and side dishes. It is worth noting that wet well units require water level monitoring during service and take slightly longer to reach operating temperature than dry well equivalents, so factoring that into your opening prep time is sensible.
From a day-to-day operational standpoint, the NPWB4 offers several practical advantages:
- Moist heat preserves food quality and appearance across extended holding periods
- Thermostatic control maintains stable temperatures without constant manual adjustment
- Four round pots included, well suited to sauces, vegetables, and side dishes
- Compact countertop footprint works at both the front-of-house servery and back-of-house pass
- Draining and cleaning the wet well at end of service is a straightforward task
The unit requires a standard electrical supply and a stable, level countertop surface. Where counter height is a consideration, an optional stand is available separately. Allow reasonable clearance around the unit for daily use, and plan access for draining at the close of each service.
The NPWB4 is a practical choice for cafés, pub kitchens, school canteens, and smaller restaurant operations that need reliable, moist heat holding without a large footprint. For sites running higher volumes or needing more pot positions simultaneously, a unit with greater capacity may be worth considering.
If you would like to talk through whether the wet well configuration suits your menu and service setup, the team is always happy to work through the options with you.
£957.00(£1,148.40 inc VAT)
The Lincat Opus OE8109 is an electric chip scuttle designed to hold freshly cooked chips and similar fried products at serving temperature between the fryer and the plate. It uses a combination of an overhead heat lamp and a base heating element to maintain even warmth across the holding area without drying out or toughening the product during the wait.
In a busy service environment, chip quality can deteriorate quickly once product leaves the fryer. The dual-heat approach addresses this directly, maintaining consistent conditions during peak covers and keeping chips at temperature for a realistic holding window. The overhead lamp also provides a degree of presentation value, which suits open pass or servery counter setups where the unit is visible to front-of-house staff or customers.
From a practical standpoint, several design details contribute to day-to-day usability:
- Perforated fat drain plate keeps chips elevated above draining fat, helping preserve texture
- Removable chip container simplifies end-of-service cleaning
- Dual heat source reduces cold spots across the holding area
- Overhead lamp doubles as a presentation feature on an open pass or servery counter
The OE8109 is a countertop unit requiring only a standard electrical connection — no gas supply or water feed is needed, which keeps installation straightforward. It is worth checking available counter depth and clearance above your pass before ordering, as the overhead lamp adds to the overall unit height and may be a consideration in tighter servery configurations.
This model is well suited to pubs, cafés, fish and chip restaurants, and casual dining operations where chips are a high-volume menu item and holding quality during service is a regular concern. For larger operations running multiple fryer banks or extended continuous service, a higher-capacity holding solution may be worth considering alongside this unit.
If you are weighing up whether this fits your service style and throughput, our team is happy to talk through the options with you.
£396.00(£475.20 inc VAT)
The Lincat BS4 is a countertop dry heat bain marie supplied with four stainless steel round pots. Rather than using a water bath, it circulates warm air around the pots to hold soups, sauces, gravies, and braised dishes at a consistent serving temperature throughout a service period. The principle is broadly similar to a low oven — content stays hot without any water to manage.
In everyday service, the BS4 performs reliably in smaller servery environments where a compact number of menu items need to be held across a lunch or dinner sitting. The adjustable heat control allows operators to fine-tune the holding temperature, which is worth having when a menu includes items with different heat tolerances — a cream sauce and a thick braised stew behave quite differently under sustained heat.
The dry heat format offers some practical day-to-day advantages:
- No water to fill, monitor, or top up during service
- Lower spillage risk when repositioning the unit on a counter
- Typically more energy-efficient than a comparable wet well unit
- Round pots are straightforward to ladle from and clean down after service
- Well suited to thicker products such as soups, stews, and braised dishes
It is worth being straightforward about where dry heat has its limits. Products that lose moisture quickly at the edges, or items that depend on a humid holding environment, are generally better suited to a wet well configuration. For extended holding periods or higher service volumes, a wet heat unit or a model with greater pot capacity may be the more appropriate choice.
The BS4 is a sensible fit for café serveries, pub kitchens, small restaurant pass areas, or as a supplementary unit running alongside a larger bain marie setup. Sites with more complex menus or higher throughput requirements may find a higher-capacity model worth considering.
If you are weighing up dry heat against wet heat for the products you are holding, or want to talk through how this unit would fit your existing servery arrangement, we are happy to work through it with you.
£1,260.00(£1,512.00 inc VAT)
The Victor HC20MS is a British-made, general-purpose hot cupboard designed to hold plated meals or stacked plates at safe serving temperatures throughout active service. It operates as a fully mobile, self-contained unit with a flat top surface, making it suitable as a pass point, a holding station on the servery floor, or an additional staging area during busy service periods. Internal shelving can be configured to suit different loading arrangements, which gives it useful flexibility across varied service formats.
The double-skinned, insulated stainless steel cabinet helps the unit maintain a consistent internal temperature without the exterior becoming uncomfortably hot to the touch — a practical consideration where staff are moving around the unit at pace during peak hours. A digital temperature display allows holding conditions to be monitored quickly without opening the doors.
The HC20MS has been built with daily cleaning and workflow in mind. Top-hung sliding doors eliminate dirt traps along the front edge, internal shelves and support sets are fully removable, and radius corners throughout the interior reduce debris accumulation. Key practical features include:
- Four 100mm swivel castors, two with brakes, for controlled repositioning
- Pull/push bar for safe movement around the servery or kitchen floor
- Curly power cable with plug park to keep the unit tidy between sittings
- Satin-finish stainless steel interior for straightforward daily cleaning
- Flat top surface suitable for use as a service pass or additional staging area
As a mobile unit, the HC20MS requires no fixed installation. It connects to a standard single-phase supply, so socket position and floor surface are worth confirming before finalising placement. The castors make repositioning straightforward whether reconfiguring for a different service layout or moving the unit aside for a thorough clean.
This model is well suited to restaurants, hotel banqueting operations, staff canteens, and educational catering sites where a reliable, self-contained holding unit is needed without a permanent installation. It performs well at mid-volume service. For operations running significantly higher plate counts or extended holding across multiple courses, a larger-capacity model within the Victor range would be worth considering. Victor also offers compatible accessories including tray slides, gantries, and sneeze guards, and alternative finishes are available where the unit needs to sit comfortably in a front-of-house environment.
If you would like to talk through whether this model suits your service volumes and layout before placing an order, our team is happy to help you work it through.
£816.00(£979.20 inc VAT)
The Parry 1888 is a mobile hot cupboard designed to hold plated meals at consistent serving temperatures throughout a busy service. It runs on a standard electrical supply, requires no fixed installation or water connection, and sits on lockable castors that allow it to be positioned precisely on the pass or moved between service areas as the operation demands. The flat top adds a useful staging surface alongside the primary holding function.
During a full service, a unit like this earns its place quickly. Plated meals can be held at temperature while waiting to go to the table, reducing the risk of food cooling between the kitchen and the guest. The thermostatically controlled interior maintains a steady temperature without constant attention, which matters when kitchen staff are managing multiple priorities at once. Three removable chrome wire shelves offer reasonable capacity for the unit's footprint, and their removable design keeps the interior straightforward to clean at the end of service.
From a practical standpoint, the key operational advantages are:
- Lockable castors allow flexible positioning and keep the unit stable once in place
- Thermostat control holds plates consistently throughout service without manual adjustment
- Flat top provides additional working surface for staging or final plating
- Removable wire shelves make end-of-service cleaning manageable
- No fixed installation required — plug in and position as needed
The unit requires no extraction and no specialist installation. It is worth noting that the castors are suited to flat, level surfaces — uneven flooring or raised thresholds may limit ease of movement around a site.
The 1888 suits restaurants, hotel dining rooms, and banqueting operations that need a reliable, flexible holding solution without the footprint of a larger fixed unit. It is a practical choice for services running up to around 40 covers per sitting. For operations running higher volumes or back-to-back sittings, a larger-capacity unit may be worth considering.
If you would like to talk through how this model fits your service pattern or kitchen layout, the team is happy to help.
£439.00(£526.80 inc VAT)
The Parry 1885FB is an electric wet well bain marie designed to hold gastronorm pans at consistent, safe serving temperatures throughout a service period. Rather than heating pans directly, the unit heats water beneath them, transferring warmth evenly across the base and sides. This indirect, moist heat is particularly effective at keeping sauces, soups, vegetables, and similar foods in good condition without scorching at the base of the pan or allowing a skin to form — a common problem with dry well or lamp-based holding equipment.
In a working kitchen, this type of unit earns its place on the servery counter or hot pass during lunch and dinner service. The wet well method provides stable, even heat that maintains food quality over extended holding periods, and recovery after pans are replenished is reasonably prompt. It is worth noting that wet well bain maries generally consume more energy than dry well equivalents, so operators running continuous holding across a long day should factor that into their setup decisions.
- Consistent moist heat preserves texture and moisture in held foods
- Stainless steel construction suited to daily commercial use
- Accepts standard gastronorm pans, integrating with existing kitchen pan configurations
- Straightforward to clean down between services
- Supplied as a base unit — pans selected to match your GN requirements
The unit is supplied without pans, so confirming your gastronorm pan configuration before ordering ensures the unit is loaded correctly from the outset. The 1885FB is well suited to smaller catering operations — cafés, pub kitchens, school kitchens, and similar sites where counter space is limited but reliable hot holding is essential. For higher-volume operations requiring more pan positions, a larger model from the range is likely to be more appropriate.
If you are weighing up wet well against dry well holding for your menu and service style, or want to confirm the right pan configuration, we are happy to talk it through before you order.
£504.00(£604.80 inc VAT)
The Parry 1987 is an electric wet well bain marie designed to hold gastronorm pans at safe serving temperatures throughout service. Unlike dry well models, which rely on direct contact heat, the wet well format uses heated water to surround the base of the pans. This produces a gentler, more even heat distribution that keeps food moist and service-ready without the risk of overcooking or drying out at the pan base. The unit is built in stainless steel and fitted with a drain tap for straightforward water removal at the end of service.
In a working kitchen, consistent holding temperature matters as much as the initial cook. Wet well bain maries are well regarded for maintaining food quality across extended service periods — particularly for vegetables, sauces, soups, gravies, and other moisture-sensitive dishes. The water-based heating method reduces the risk of hot spots that can catch food during a long lunch or dinner service, which is a common issue with dry well alternatives under sustained use.
From an operational standpoint, this format offers a number of practical advantages:
- Even, moist heat helps retain food texture and presentation quality throughout service
- Drain tap simplifies end-of-service water removal and daily cleaning
- Stainless steel construction stands up to daily commercial use and wipes down easily
- Gastronorm compatibility means existing kitchen pan stock will typically fit without additional outlay
- Water-based heating delivers more consistent pan-base temperatures than dry well equivalents
It is worth noting that wet well operation does consume more energy than a comparable dry well unit, and water levels will need monitoring during service to maintain performance. The unit is supplied as a base only — gastronorm pans are not included and will need to be sourced separately if not already in stock.
This bain marie is well suited to cafés, pub kitchens, small restaurants, and contract catering operations where a reliable holding solution is needed for wet or moisture-sensitive dishes. For higher-volume operations running multiple pan positions across longer service periods, a larger or multi-section unit may be worth considering.
If you are weighing up wet well versus dry well holding for your menu, or want to talk through the pan capacity you will realistically need for your service, the team is happy to work through it with you before you commit.
£600.00(£720.00 inc VAT)
The Lincat BS7W is an electric wet heat bain marie supplied with six stainless steel round pots. Its purpose is to hold liquid-based and moisture-sensitive foods — soups, sauces, gravies and pre-cooked dishes — at safe serving temperatures throughout a service period. Rather than applying dry radiant heat directly to the pot base, wet heat operation surrounds the pots with a warm, humid environment, which makes a practical difference to food quality over an extended hold.
In a working kitchen, that distinction is worth understanding. Sauces and soups held in a dry well unit will often skin over or dry at the edges within an hour or two. The wet heat method maintains consistent moisture around the pots, reducing the need for staff to repeatedly stir or attend to the food. Recovery after pots are replenished or disturbed is reasonably prompt, which helps keep a busy pass or servery moving without interruption.
From a day-to-day operational standpoint, the BS7W offers:
- Adjustable heat control to suit different food types and holding requirements
- Six round pots providing good variety across a servery or hot pass
- Stainless steel construction that cleans down quickly between services
- Wet heat action that reduces drying, skinning and crusting during extended holds
- A compact footprint suited to smaller counters and servery setups
Installation is straightforward — the unit is electric and requires a suitable socket at the point of use. It is worth confirming counter space and power availability before ordering. Wet heat units do draw slightly more energy than dry well equivalents over a full service day, which is worth bearing in mind for sites with long operating hours.
The BS7W is well suited to pub kitchens, hotel carveries, school canteens and café serveries where a modest range of dishes needs to be held reliably through lunch or dinner service. For operations running larger batch volumes, more serving positions, or all-day service, a higher-capacity unit may be a better fit.
If you would like to talk through whether this unit is the right match for your counter layout or service pattern, the team is glad to help before you place an order.
£1,421.00(£1,705.20 inc VAT)
The Victor HC30MS is a British-made mobile hot cupboard with an enclosed holding compartment and a flat, usable top surface. It is designed for operations that need reliable, consistent hot holding across structured meal services, with the practical advantage of being repositioned between service areas as the workflow demands.
In a busy service environment, the HC30MS holds plated meals and serving dishes at stable temperatures throughout extended periods. The flat top provides usable counter or pass-through space, which proves particularly valuable on a tight service pass or in a banqueting setup where surface area is routinely scarce. A digital temperature display allows staff to confirm conditions at a glance without breaking service flow.
Key operational advantages include:
- Mobile on four swivel castors with two brakes for safe, controlled repositioning on level floors
- Double-skinned stainless steel construction keeps exterior surfaces cool to the touch during service
- Top-hung sliding doors with no front-edge dirt traps, reducing cleaning time after service
- Fully removable shelves for thorough end-of-service cleaning
- Curly power cable with plug park, keeping trailing cables tidy and reducing trip hazards
As a plug-in unit, the HC30MS requires a suitable socket wherever it is positioned — confirm your electrical supply arrangements before settling on a permanent location. The mobility is a genuine advantage in banqueting halls, multi-room event venues, and serveries, but the unit should always operate on a level floor and be braked when stationary. It is not suitable for use on slopes or ramps.
The HC30MS is well suited to restaurants, hotels, staff catering facilities, and contract caterers running predictable service periods. For sites with significantly higher throughput or those requiring multiple independent holding zones, a larger-capacity model from the Victor range is worth considering. Where floor space is limited, a more compact single-door alternative may be a more practical fit.
If you would like to talk through whether the HC30MS is the right match for your service volume and kitchen layout, the team is happy to help before you commit.
£5,111.00(£6,133.20 inc VAT)
The Victor BL100H1 Banquetline 100 is a British-made heated banquet cabinet built to hold plated meals and gastronorm pans at consistent serving temperatures across a full service period. It is a practical, purpose-built piece of equipment for operations where large numbers of covers need to be held and transported at temperature without compromising food quality or presentation.
In service, the cabinet performs reliably during extended holding periods, which is where banqueting equipment is most often tested. A microprocessor controller with an external digital temperature display gives service teams clear oversight of internal holding conditions throughout service. The unit comes factory set at 85°C with an operator-adjustable range to suit different menu requirements. An integral humidity reservoir in the base helps maintain moisture levels during holding, which is particularly important for plated meals held over longer periods.
Key operational advantages include:
- Plug-in 13A operation — no dedicated electrical installation or electrical work required
- Heavy-duty castors with brakes for safe movement between kitchen, servery, and function space
- Two push/pull bars and a two-metre curly cord with plug park for practical mobile deployment
- Integral humidity reservoir to protect food quality during extended holding
- Four shelves and supports supplied as standard, ready for immediate use
Because the cabinet runs from a standard 13A moulded plug, it can be put into service quickly without any remedial electrical work. It is worth confirming that suitable socket positions exist at both the loading point and the point of service, and care should be taken when manoeuvring the unit across uneven or threshold flooring during transport.
The BL100H1 is well suited to hotels, wedding and events venues, conference centres, and contract caterers where plated meal holding is a regular, high-volume part of the operation. Sites with lower throughput or occasional banqueting may find a smaller-capacity model a closer match, while operations running multiple large concurrent sittings may benefit from a heavier-duty or higher-capacity alternative.
If you would like to talk through how this cabinet would fit your service volumes and workflow, our team is happy to help before you commit to an order.
£418.00(£501.60 inc VAT)
The Lincat BM4W is an electric counter-top bain marie that uses a water-filled well to hold pre-cooked foods at consistent serving temperatures throughout a service period. Warm water produces a gentle, moist heat environment across the holding area, keeping food at the right temperature without the surface drying that can occur with dry well alternatives. It is a straightforward, practical unit designed for everyday food holding in commercial kitchens where dependability matters more than complexity.
In service, wet heat comes into its own with moisture-sensitive preparations. Soups, gravies, sauces, pulses, and cooked vegetables hold particularly well, retaining texture and appearance across a full service period rather than developing a skin or thickening unevenly at the surface. Wet heat units also tend to reach working temperature relatively quickly compared to dry well alternatives, which is useful when service begins shortly after set-up. The adjustable heat control allows operators to find the right holding level for whatever is on the menu that day.
- Gentle moist heat keeps soups, sauces and gravies in good condition throughout service
- Well suited to vegetable holding during plated meal and carvery service
- Consistent holding temperatures support food safety compliance
- Compact counter-top footprint fits within tight service areas and existing counter runs
- Adjustable heat control adapts across different menu requirements
A few practical points are worth considering before ordering. The wet well requires topping up with water during use, and energy consumption over a long shift is marginally higher than a dry well equivalent. The BM4W is supplied as a base unit only — gastronorm pans and lids are sold separately. It is worth confirming your pan configuration before ordering, particularly if the unit is being integrated into an established counter run.
The BM4W is a good fit for independent restaurants, café kitchens, school canteens, and smaller hospitality operations where a compact, no-fuss food holder is the priority. For sites running extended service periods, holding larger batch volumes, or requiring a multi-well solution, a higher-capacity model would be worth considering instead.
If you are weighing up wet versus dry heat for your particular menu, or want to confirm the right pan setup before committing, we are glad to talk it through.
£495.00(£594.00 inc VAT)
The Parry 1985 is an electric wet well bain marie designed for holding food at service temperature during commercial kitchen operations. It accepts standard gastronorm pan configurations and is supplied as a base unit without pans, giving operators the flexibility to choose pan layouts that suit their menu. Construction is stainless steel throughout, and a drain tap is fitted as standard to simplify water changes and end-of-service cleaning.
Wet well bain maries work by heating water held directly beneath the pans, transferring gentle, even warmth upward into the food. This makes the 1985 particularly well suited to holding vegetables, sauces, gravies, and soups — menu items where moist-heat holding preserves texture and appearance far better than dry heat would. Heat distribution remains consistent across pan positions throughout a full service, without the hot spots or uneven temperatures that can affect food quality toward the end of a busy period.
For kitchens running carvery service, hot counters, or buffet-style operations, the practical advantages of this approach are well established:
- Even, stable heat across all pan positions throughout service
- Moist holding environment limits moisture loss and preserves food quality
- Drain tap simplifies water changes and end-of-service cleaning routines
- Stainless steel construction withstands regular commercial use and chemical cleaning
- Gastronorm compatibility integrates with standard pan inventory already in use
The unit requires a suitable electrical connection and should be positioned on a level, stable surface with adequate clearance around it. As a wet well model, access to a nearby water source for filling is a practical necessity. It is worth thinking carefully about how many dishes you need to hold simultaneously — this unit is well matched to moderate-volume operations. Sites holding a larger number of items at once, or running extended high-volume service periods, may find a wider or multi-section configuration better suited to their needs.
This bain marie is a practical choice for restaurants, pub kitchens, carveries, cafes, and contract catering operations where reliable wet-heat food holding is required during service. Parry is a long-established UK manufacturer with a strong track record in commercial kitchen equipment, and the 1985 reflects that background in straightforward, dependable design.
If you are weighing up whether this unit suits your service volume or fits your kitchen layout, we are happy to talk it through before you make a decision.
£1,879.00(£2,254.80 inc VAT)
The Lincat P8P3PT Panther is a mobile hot cupboard designed for holding plated meals and warm plates at service temperature. It runs on four heavy-duty castors, making it straightforward to reposition between service areas — a practical arrangement where the serving point changes between covers or where a fixed pass position is not possible.
The pass-through configuration is the most operationally significant feature. Double sliding doors on both sides of the cabinet allow kitchen staff to load from one end while front-of-house retrieve from the other, keeping traffic moving during a rush without the two teams working against each other. Fan-assisted heating distributes warmth evenly through the interior, which helps maintain consistent holding temperatures even when the doors are opened frequently during busy service — a common weakness in still-air units. Two height-adjustable internal shelves allow the unit to be set up around the plate and dish sizes in regular use.
In practical terms, the key operational advantages are:
- Pass-through access from both sides keeps kitchen and floor staff working independently during peak service
- Fan-assisted circulation reduces cold spots caused by repeated door opening
- Adjustable shelving accommodates different plate sizes and cover configurations
- Castors allow repositioning without tools or dismantling between service periods
- Robust build suited to regular use across multiple sittings
Because the unit is mobile rather than fixed, there is no hard installation requirement, but a suitable electrical supply within reach of the intended position is essential. It is worth confirming socket locations and lead reach before settling on placement — particularly in banqueting or function spaces where the unit may operate away from the main kitchen. Allow enough clear floor space on both sides for the sliding doors to operate freely.
This unit is well suited to mid-sized restaurants, hotel food and beverage operations, and event or banqueting catering where service flexibility matters. For very high-volume operations or extended holding runs across large banqueting covers, a larger-capacity unit may be a better match. If you are unsure whether this model fits your service volumes or layout, we are glad to talk it through with you.
£1,882.00(£2,258.40 inc VAT)
The Parry HOT18BM is a full-width, mobile hot cupboard that combines a dry plate-warming cabinet with a wet-heat bain marie top in a single 1800mm unit. The lower cabinet holds and warms plates and dishes throughout a full service period, while the bain marie top accepts full and fractional GN pans for holding sauces, gravies, vegetables, and portioned dishes at the same time. Combining both functions in a single footprint makes this a practical choice where counter or servery space is limited but holding capacity still needs to be meaningful.
Thermostatic control across both the cabinet and the bain marie top means operators can set a stable temperature at the start of service and rely on it to hold consistently through peak periods, without constant adjustment. The five perforated internal shelves are each supplied in three sections, keeping individual pieces manageable to handle rather than requiring two members of staff to lift a full-width shelf. The removable double-skinned doors are designed to come away without tools, which makes end-of-service cleaning straightforward.
- Five perforated shelves in three sections for easier handling and cleaning
- Removable double-skinned doors with no tools required for removal
- Four castors fitted as standard, two locking, for flexible servery positioning
- Thermostatic control across both the cabinet and bain marie top independently
- GN-compatible bain marie top accepts full and fractional pan configurations
The castors allow the unit to be repositioned during a quiet period or moved for cleaning behind — a practical consideration in serveries where layout shifts between services. Two locking castors keep it stable during use. It is worth noting that gastronorm pans are not included and will need to be sourced separately. Any gantry visible in product imagery is an optional accessory and is not part of the standard supply.
At 1800mm wide, this unit is well suited to larger servery operations — hotel restaurants, staff canteens, leisure venues, and event catering setups where multiple dishes need to be held and served concurrently. For smaller operations or tighter servery runs, a shorter hot cupboard configuration is likely a more proportionate fit. For very high-volume sites with extended service periods and intensive pan use, a heavier-duty static unit may be worth considering alongside this model.
If you would like to talk through whether this configuration suits your service setup and covers, the team is glad to work through it with you before you commit.
£2,642.00(£3,170.40 inc VAT)
The Hatco HDW-2 is a free-standing two-drawer food warmer designed to hold prepared dishes at consistent serving temperatures until they reach the pass. Each drawer operates independently with its own thermostat, which means different food types can be held at different temperatures simultaneously — a genuinely practical arrangement where a kitchen is running multiple menu components with different holding requirements.
In a busy service environment, consistent temperature holding directly affects food quality and presentation. The HDW-2 is built to run reliably through extended service periods without the temperature drift that can catch operators out during a long push. The stainless steel construction is robust enough to handle the day-to-day demands of a working kitchen, and the unit is designed to clean down quickly as part of a regular hygiene routine.
From an operational standpoint, the key practical advantages are:
- Independent thermostatic controls per drawer allow simultaneous holding at different temperatures
- Vented drawer sides help manage moisture and preserve food quality during holding
- Deep food pans provide meaningful holding capacity across a range of products
- Stainless steel construction throughout supports straightforward daily cleaning
- Free-standing on legs — no fixed installation or specialist groundwork required
Setup is straightforward. The HDW-2 requires only a standard electrical connection and can be positioned on a countertop or within a pass area without permanent installation work. There is no requirement for plumbing or dedicated ventilation. It is worth confirming the surface is level and that the power cord can reach the supply directly without an extension lead.
The HDW-2 is well suited to cafés, pub kitchens, hotel restaurants, and similar small to medium-sized operations where a compact, dependable holding solution is needed without the footprint of a larger unit. Kitchens holding high volumes across several food categories simultaneously may find a unit with greater drawer capacity more appropriate.
If you are weighing up whether the HDW-2 fits your pass layout or service volumes, the team is happy to talk it through with you.
£2,642.00(£3,170.40 inc VAT)
The Hatco HDW-2N is a freestanding two-drawer food warmer designed to hold cooked items at safe serving temperatures throughout service. Each drawer operates independently with its own thermostatic control, so different food types can be held at different temperatures simultaneously. A temperature monitor gives service staff a visible reference without needing to open the drawers, which helps maintain consistent holding conditions during a busy pass.
On the pass, a drawer warmer fills a specific and important role — bridging the gap between production and service. Proteins, sides, bread rolls, and plated components can be staged and held without deteriorating in quality or temperature. The two-drawer layout gives this unit enough practical capacity for smaller or more focused services, and the narrow profile is a deliberate design choice that makes it viable in locations where a standard-width warmer simply would not fit. Vented sides help regulate conditions inside the drawers during extended holding periods.
Practical operational advantages include:
- Independent drawer controls allow simultaneous holding of different food types at different temperatures
- Narrow footprint suits tight pass and counter configurations
- Visible temperature monitor supports service staff without disrupting holding conditions
- Heavy-gauge stainless steel construction suited to daily commercial use
- Freestanding on legs with plug-and-play installation requiring no fixed mounting
Installation is straightforward. The unit stands on legs and is supplied with a power cord and plug, so it can be positioned and brought into service without specialist installation work. You will need a suitable mains socket at the point of use, and it is worth confirming the local supply meets the unit's power requirements before ordering.
The HDW-2N is well suited to smaller restaurants, café kitchens, pub operations, and grab-and-go counters where a compact, reliable hot holding solution is needed without committing significant counter space. For higher-volume kitchens or operations requiring greater simultaneous holding capacity, a wider or higher-capacity model within the Hatco range would be worth considering.
If you are unsure whether this unit fits your service style or kitchen layout, our team is happy to talk it through before you commit.
Showing 60/337
Browse Related Categories
Food Holding & Warming Buying Guide
Hot holding
Bain maries, hot cupboards, drawer warmers, food warmers and heated banquet cabinets from Lincat, Parry, Buffalo, Victor, Hatco, Alto-Shaam, Duke and Scanbox.
Display
Hot food merchandisers from Lincat, Buffalo, Roller Grill and Victor, plus chip scuttles and fries stations from Vizu, Lincat, Hatco, Buffalo and Parry.
Transport
Insulated and heated food carriers, delivery bags and beverage dispensers from Cambro, Vogue, Rieber and Pujadas, plus plate warmers from Parry, Lincat, Buffalo and Victor.
Call 01304 827272 for help choosing hot holding for your service.
Frequently asked questions
What is the difference between wet heat and dry heat bain maries?
Wet heat models hold food over a heated water bath. Dry heat models heat the well directly with no water. Lincat make both.
Do you sell heated food carriers?
Yes. Cambro and Rieber make electric heated food carriers, in the Heated Food Carriers section.
Can you help me choose?
Yes. Call 01304 827272 with your menu, covers and service style.
- Choosing a selection results in a full page refresh.
- Opens in a new window.