Food Processor Accessories

The Robot Coupe 27113 is a purpose-made dicing kit designed exclusively for the R402 and R402 VV continuous-feed food processors. It converts the machine to produce uniform 8x8x8mm dice and includes the dicing grid and all associated components required — no modification or adaptation needed. As a genuine Robot Coupe accessory, it is engineered to fit those two models precisely.

In a prep kitchen, cut consistency has a direct operational value. Even dice means predictable cooking times, a cleaner finish on the plate, and more reliable portion presentation across covers. Running vegetables through the R402 with this kit produces repeatable results at volume, which matters most during high-output prep shifts when both speed and uniformity are under pressure. The 8mm cube is a well-established size across a broad range of applications — soups, stews, salads, sauces, and garnishes all benefit from a clean, regular cut at this dimension.

From a practical standpoint, the main operational advantages are:

• Consistent 8x8x8mm dice across large prep volumes without hand-cutting
• Faster throughput, freeing brigade time from repetitive knife work
• Straightforward to swap in and out when alternating between cutting functions
• Genuine fit for the R402 — no adjustment or workaround required
• Redirects skilled knife time to tasks that benefit more from it

Compatibility is the critical point to confirm before ordering. This kit is designed exclusively for the R402 and R402 VV and will not fit other processors in the Robot Coupe range. If there is any uncertainty about the model, checking the machine's serial plate before purchasing is worth the minute it takes.

If your kitchen dices at particularly high volume, or you need to produce a range of dice sizes across different prep tasks, it may be worth discussing whether a broader accessory set or a different processor configuration would serve you better. We are happy to talk through your prep requirements.

The Robot Coupe 27345 is a genuine replacement blade with a fine serrated edge, designed specifically for the R401, R402, and R402 VV bowl cutter food processors. Where a smooth blade tends to compress or drag through softer produce, the serrated profile grips and cuts cleanly, which makes a meaningful difference when processing ingredients that a standard edge would bruise or tear.

In a working prep kitchen, blade choice has a direct effect on the consistency of the finished product. Using the right profile for the ingredient reduces waste from uneven texture or damaged cut surfaces, and allows the processor to perform as it was designed to for that specific task. This matters most when working with tomatoes, cooked meats, bread, or similarly soft materials where clean separation is important.

• Fine serrated edge grips and cuts rather than compressing soft ingredients
• Compatible with R401, R402, and R402 VV bowl cutter models
• Genuine Robot Coupe part — reliable fit without modification or adaptation
• Suitable as a direct replacement for a worn blade or as an additional cutting option
• Maintains cleaner cut edges, reducing prep waste and improving portion consistency

This is an accessory blade rather than a standalone machine. It fits directly into compatible Robot Coupe bowl cutters without any adaptation required. As with all sharp processor blades, careful handling and appropriate storage between uses is important both for safety and for preserving the cutting edge over time.

It is well suited to kitchens already operating the R401 or R402 series that want to broaden their prep capability or replace a blade that has had significant use. If you are unsure whether this blade suits your specific processor model or the ingredients you are working with, we are happy to talk it through before you place an order.

The Sirman MSC06AMOF is a replacement or additional emulsifying knife designed for use with the Sirman 6VT food processor bowl. Emulsifying knives are used where a finer, smoother result is needed than a standard processing blade provides — typically for sauces, soups, mayonnaise-style emulsions, and smooth purées. This type of attachment is a common requirement in kitchens that use their bowl cutter across a range of prep tasks and need the right blade profile to match the job.

Using the correct knife for the task makes a practical difference to output quality. An emulsifying knife is designed to process at finer tolerances than a general-purpose blade, helping achieve consistent texture in high-moisture preparations without over-processing. Kitchens that produce sauces or emulsified dressings in volume will find this a more reliable option than attempting the same results with a standard cutting blade.

• Helps achieve smooth, consistent results in sauce and emulsion work
• Reduces the risk of over-processing delicate high-moisture preparations
• Allows the 6VT processor to be used across a broader range of prep tasks
• Straightforward to swap between blades during a prep session
• Genuine Sirman accessory, suited to the 6VT bowl cutter

As with all bowl cutter blades, correct handling and storage matter — emulsifying knives are precision-ground and should be kept separate from general utensils when not in use. Confirm compatibility with your specific 6VT model before ordering, as bowl cutter accessory fitment can vary across production runs.

This attachment is best suited to operations already running a Sirman 6VT food processor that want to extend its capability into finer sauce and emulsion work. If you are unsure whether this blade is the right fit for your machine or your prep requirements, we are happy to help clarify before you order.

The Sirman MSC04AMOI is a replacement kneading knife designed specifically for use with the Sirman 4VT food processor bowl. It is the mixing attachment intended for dough and similar heavy mixtures, allowing the machine to be used for bread, pastry, and other kneading tasks as part of everyday food preparation.

As a manufacturer-matched accessory, it is designed to work correctly with the 4VT bowl assembly. Using the correct knife ensures the processor operates as intended — incorrect or generic attachments can affect mixing performance and place unnecessary strain on the motor over time.

For kitchens that use their Sirman 4VT across a range of tasks, having a dedicated kneading knife available makes it straightforward to switch between applications without improvising. It is a practical addition for any operation that relies on the 4VT for regular dough work.

If you are unsure whether this attachment is compatible with your current machine configuration, or if you need guidance on which Sirman accessories best suit your production requirements, our team is happy to help you confirm the right fit before you order.

The Robot Coupe 27588 is a 1.5mm fine grating disc designed for use with compatible Robot Coupe food processors and combination machines. At this cut size it produces a fine, even grate from hard cheeses, firm vegetables, chocolate, and similar ingredients where a coarser disc would leave the wrong finish for the application.

Disc selection matters more in practice than it might first appear. The difference between a 1.5mm grate and a coarser alternative affects how an ingredient behaves in a finished dish — finely grated Parmesan that needs to melt into a sauce, or finely grated vegetable incorporated into a mix where coarser shreds would alter the texture of the end product. Having the correct disc means prep output is consistent from one service to the next, without secondary work to correct the result. Robot Coupe discs are built to handle the throughput demands of a busy prep kitchen, maintaining cut quality across repeated daily use rather than degrading after modest use as cheaper alternatives can.

• Consistent 1.5mm finish reduces the need for secondary preparation work
• Compatible across a wide range of Robot Coupe food processors and combination machines
• Hard-wearing construction maintains cut quality through sustained daily use
• Quick disc swap keeps changeover time between prep tasks to a minimum

Confirmed compatibility includes the R101, R201, R211, R301, R401, R402, and CL40 models, though it is worth verifying your specific machine model before ordering. Robot Coupe produce several disc ranges and not all discs are interchangeable across different machine families — a quick check at the point of ordering avoids a wasted trip to the supplier.

If you are unsure whether this disc suits your machine or your prep requirements, we are glad to help confirm the right choice before you order.

The Sirman MSC06AMOP is a dedicated sauce knife attachment designed specifically for use with the Sirman 6VT bowl cutter. Rather than a general-purpose cutting blade, this knife is shaped to produce the finer, more emulsified texture required for pesto, herb pastes, and similar oil-based sauce work. It is a replacement or supplementary accessory for operators already running a 6VT.

Blade geometry makes a practical difference when processing delicate herb preparations. A standard blade can overwork these mixtures, generating excess heat or producing an uneven consistency — particularly when emulsifying oil into the mix. This attachment is shaped to reduce that risk, helping kitchens achieve a repeatable texture across batches without the inconsistency that comes from using the wrong blade profile for the task.

For any operation producing sauces or pastes regularly as part of a prep routine, this accessory extends the working range of the 6VT without the need for additional equipment. It is a practical addition rather than an optional extra where sauce work is a regular part of the menu.

Compatibility is an important consideration. This knife is designed specifically for the 6VT model — blade fittings and bowl dimensions differ across the Sirman range, and compatibility with other models should not be assumed. If you are running a different Sirman bowl cutter, it is worth confirming the correct attachment before ordering.

If you are unsure whether this blade suits your current machine or your production requirements, we are happy to talk it through with you.

The Robot Coupe 27116W is a French fry cutter disc designed to fit the R402 and R402 VV food processors. Fitted in place of the standard cutting disc, it processes whole potatoes and firm root vegetables into uniform 8x8mm strips in a single pass — no separate press, mandoline, or additional tooling required. It is a straightforward way to bring chip preparation into the processor workflow if you are already running an R402 in your prep kitchen.

For any operation preparing chips in volume, consistency of cut has a direct effect on cooking performance. Hand-cut or unevenly sized chips cook at different rates, which wastes oil, complicates frying times, and creates variation on the pass. Processing through the R402 with this disc fitted produces repeatable, even cuts across the whole prep session, which supports more predictable fry times and more consistent portion presentation.

In a working prep environment, the practical advantages include:

• Uniform 8x8mm cut produced in a single pass — no secondary trimming
• Reduces reliance on manual knife or press prep during the pre-service window
• Consistent chip dimensions support even oil penetration and more reliable cook times
• Integrates directly into the existing R402 workflow as a simple disc swap
• Built for repeated daily use in a commercial prep setting

Compatibility is worth confirming before ordering. The 27116W is designed for the R402 and R402 VV specifically — it is not a universal fit across the wider Robot Coupe range. If your R402 is an older production run or has been modified, it is worth a quick check with the supplier before the disc arrives. Operations running significantly higher prep volumes may also want to consider whether a larger-capacity processor would be a better starting point.

This disc suits any kitchen already operating an R402 that wants to standardise chip prep within the processor's existing role. If you are unsure whether it will work with your machine, or want to talk through how it fits into your prep setup, the team is happy to go through the details with you.

The Robot Coupe 27138 is a genuine replacement coarse serrated blade made specifically for the R201 bowl food processor. Where a plain blade tends to compress or bruise firm, fibrous ingredients rather than cut through them cleanly, the serrated edge bites into the material and produces a more defined, consistent result. Typical applications include herb stalks, firmer root vegetables, and other produce with structural resistance that plain blades can struggle with.

In a working kitchen, blade selection has a direct bearing on prep quality and batch consistency. Using the right blade for the task reduces tearing, improves uniformity across large volumes, and helps maintain the presentation standard expected going into service. If your R201 is in daily use, keeping a dedicated blade for fibrous work also reduces unnecessary wear on your primary cutting blade — a straightforward way to extend blade life across the set.

• Coarse serration suited to fibrous, firm, and structured produce
• Genuine Robot Coupe part — assured fit and performance on the R201
• Produces cleaner, more consistent cuts than a plain blade on resistant ingredients
• Distributes prep tasks across the blade set, reducing wear on the primary blade
• Straightforward to fit, clean, and rotate into daily use

It is worth noting that this blade is compatible with the R201 only. Robot Coupe blades are not interchangeable across the range, so if you are running a different model it is important to confirm the correct part reference before ordering.

If you would like to talk through which blades suit your prep workload, or want to confirm this is the right part for your machine, the team is glad to help.

The Robot Coupe 27393 Cuisine Kit is an attachment that extends the capability of compatible Robot Coupe bowl processors to include fruit sauce, coulis, and smooth purée preparation. It is not a standalone machine — it connects directly to a processor you already own, adding a specific function without occupying additional bench space or requiring a separate piece of equipment.

For kitchens where fruit-based components appear regularly — dessert sections, pastry operations, breakfast services producing coulis or compote elements during prep — this kind of attachment consolidates that work onto a machine likely already embedded in the daily routine. That keeps the preparation workflow tighter, reduces equipment handling between tasks, and limits the number of items going through the wash at the end of service.

• Extends processor capability to cover fruit sauces, coulis, and smooth purées
• Integrates directly with the existing machine, adding no bench footprint
• Consolidates prep tasks, reducing equipment changeovers during service
• Straightforward to fit for operators already working with the Robot Coupe system
• Reduces end-of-service cleaning by keeping fruit prep on a single unit

Compatibility is specific. This attachment is designed for the R201, R201 Ultra, R211, and R211 Ultra models only and will not fit other Robot Coupe units. It is worth confirming your exact model before ordering. If you are not certain whether your current processor is compatible, or whether this attachment is the right addition for the volume and type of work your kitchen handles, the team is happy to talk it through.

The Robot Coupe 27081 is a replacement julienne disc producing uniform 6mm strips. It uses a twin-blade design, making two cuts per rotation, which supports consistent output across a full batch when processing vegetables, firm fruits, and similar ingredients through compatible Robot Coupe machines.

A 6mm julienne sits in a practical middle ground for most kitchens — finer than a coarse shred but substantial enough to hold its shape through light cooking, marinating, or cold presentation. It sees regular use in stir-fry preparation, coleslaw bases, garnish work, and any application where cut uniformity matters for plate consistency or cooking time.

This disc is compatible with the Robot Coupe R101, R201, R211, R301, R401, R402, and CL40 models. Robot Coupe discs are not universally interchangeable across their range, so confirming your machine's model number before ordering is worthwhile. Correct disc fitment ensures the seating, drive engagement, and safety interlock all function as intended — using an incompatible disc is not a safe workaround.

• Twin-blade configuration for consistent 6mm julienne output per rotation
• Suitable for vegetables, firm fruits, and similar prep ingredients
• Direct replacement for worn or damaged discs on compatible models
• Designed for use with Robot Coupe bowl and continuous-feed machines

If you are processing high volumes and throughput is a regular pressure point, it may be worth discussing whether a higher-capacity machine in the Robot Coupe range would better suit your operation — the appropriate disc options follow from that choice.

If you would like to confirm compatibility with your existing machine before placing an order, the team is glad to help you get it right first time.

The Robot Coupe 27599 is a genuine replacement julienne disc producing a precise 2x2mm matchstick cut. It is designed for use with a range of Robot Coupe bowl-feed and continuous-feed food processors, including the R101, R201, R211, R301, R401, R402 and CL40, making it a commonly specified spare or additional disc for kitchens already running Robot Coupe prep equipment.

A 2x2mm julienne is a fine, consistent cut suited to garnishes, stir-fry preparation, coleslaw, and any dish where uniformity across a full prep session matters. Achieving that consistency by hand at volume is time-consuming and variable. Running the correct disc through a Robot Coupe processor delivers a repeatable result without the labour overhead, session after session.

• Produces a clean, uniform julienne across firm vegetables at volume
• Genuine Robot Coupe disc — fits correctly and maintains machine performance
• Significantly reduces prep time compared to hand-cutting at high volume
• Interchangeable with other compatible discs across the supported model range

Compatibility across Robot Coupe's disc range is model-specific, and it is straightforward to order the wrong fitting if you are uncertain of your machine's generation or configuration. If you are building out a set of cutting discs or have any doubt about fit, it is worth confirming before you order. The team are glad to check compatibility against your machine.

The Robot Coupe 27764 is a genuine parmesan grating disc designed to fit the disc hub of compatible Robot Coupe food processors and vegetable preparation machines. It produces a fine, consistent grate profile suited to hard cheeses such as parmesan and grana padano, and is confirmed compatible with the R101, R201, R211, R301, R401, R402 and CL40 models.

Hard cheeses behave differently under a cutting disc than softer produce. Without the correct grating profile, results tend to be uneven — either too coarse or prone to clogging — which creates inconsistency across a service. Because this disc is engineered to the tolerances of the Robot Coupe platform, it works cleanly within the machine rather than fighting against it. For kitchens that regularly finish pasta dishes, gratins, or risottos, processing hard cheese by machine rather than by hand makes a practical difference across multiple covers.

• Produces fine, consistent results from hard cheeses including parmesan and grana padano
• Genuine Robot Coupe accessory, built to exact machine tolerances
• Fits directly into the disc hub with no tools required for changeover
• Reduces manual prep time during busy service periods
• Confirmed compatible with R101, R201, R211, R301, R401, R402 and CL40

There is nothing to install beyond fitting the disc to a compatible machine. The one practical check worth making before ordering is confirming your machine model. Robot Coupe's disc range spans several hub configurations, and not all discs are interchangeable across the full product line — the 27764 is specific to the models listed above.

This disc suits kitchens that work with hard cheese regularly and already operate one of the compatible Robot Coupe machines. If you are unsure whether it will fit your model, or if you are looking to build out your disc set for a wider range of prep tasks, we are happy to work through the options with you.

The Sammic CR-143 is a vegetable preparation attachment designed to extend the capability of compatible Sammic mixer and potato peeler units. It mounts directly onto host machines fitted with a BE-10C, BE-20C, BE-30C, BE-40C, PPC-6+, or PPC-12+ drive, using the existing motor to handle slicing, grating, and cutting tasks during prep. No separate power source, no additional motor to maintain, and no extra footprint on the bench.

This approach suits kitchens where vegetable prep is a regular but not continuous part of the day — a modest restaurant kitchen, a café, a hotel operation, or a contract catering unit where bench space is limited and a dedicated standalone machine would spend a fair portion of its time idle. The CR-143 allows an existing piece of kit to do more useful work, which is straightforward operational logic where budgets and space are both being managed carefully.

There are a few practical points worth confirming before ordering. Cutting discs, slicing blades, and grating plates are not included — tooling is purchased separately. The discs are shared with the Sammic CA-300 standalone machine, so any operators already holding CA-300 tooling can use it directly with the CR-143. For those starting from scratch, it is worth mapping your prep requirements against the available disc profiles — slicing, grating, julienne, and dicing options are available — before finalising the order.

• Extends an existing Sammic machine without adding a second motor
• Frees up bench space compared to a dedicated standalone unit
• Compatible CA-300 disc range covers slicing, grating, julienne and dicing
• Reduces capital outlay where prep volumes do not justify a standalone machine
• Simplifies maintenance by consolidating prep work onto one motor unit

For sites with sustained, high-volume vegetable prep running across a long service period, a dedicated standalone machine is likely to be the more practical investment. The CR-143 works best where prep is concentrated into a defined window rather than running continuously throughout the day.

If you want to confirm compatibility with your current Sammic unit, or talk through which cutting discs will cover your prep tasks, the team is glad to help you work through that before you place an order.

The Robot Coupe 27511 is a 3mm fine grating disc designed to work with a range of Robot Coupe bowl cutter and vegetable preparation machines, including the R101, R201, R211, R301, R401, R402, and CL40. It produces a uniform fine grate across firm ingredients — hard cheeses, carrots, courgettes, and similar produce where a finer texture is specifically required rather than a coarser shred or rough cut.

In a busy prep kitchen, having the right disc to hand means teams can move through volume prep efficiently without compromising on the finished result. A 3mm grate is particularly relevant where consistency matters across a high number of covers — gratins, fine garnishes, and dishes where a specific texture needs to be replicated reliably service after service. Robot Coupe discs are manufactured to close tolerances, which supports repeatable output through heavy daily use rather than degrading quickly under sustained prep volumes.

• Produces a fine, uniform 3mm grate from hard cheeses and firm vegetables
• Manufactured to close tolerances for consistent, repeatable results over time
• Quick to swap between tasks during or between service periods
• Straightforward to remove, clean, and store as part of a wider disc set
• Compatible with several common Robot Coupe R-series and CL40 machines

Before ordering, confirm compatibility with your specific machine model and serial range. The machines listed above represent the most common configurations this disc is supplied for, but older variants or less common builds are worth verifying. As with all precision-ground cutting discs, handle and store with care — contact with hard surfaces can affect edge quality over time.

This disc suits any kitchen already running a compatible Robot Coupe machine that regularly preps fine-grated ingredients in volume. If you are building out a fuller disc set or want to confirm this is the right fit for your machine, we are happy to talk it through.

The Robot Coupe 27288 is a genuine replacement and additional blade designed to fit the R301 and R301 Ultra bowl cutter food processors. Its coarse serrated edge delivers a different cutting action to the smooth blade supplied as standard with the machine — gripping and tearing rather than slicing cleanly through, which produces a noticeably different texture in the finished product.

Blade selection matters more than it might initially appear. In a working kitchen, the wrong blade for an ingredient can result in compression, uneven texture, or a finish that needs further processing. The coarse serrated blade tends to perform more reliably with tougher, more fibrous ingredients — raw meat containing sinew, firm root vegetables, crusty bread destined for breadcrumbs, or anything where a smooth blade tends to push rather than cut. Swapping between blades is straightforward, making it practical to run one machine across varied prep tasks during the same service period.

• Genuine Robot Coupe part — correct fit and safe operation on R301 and R301 Ultra
• Coarse serrated edge better suited to fibrous, tough, or textured ingredients
• Produces a different texture to the standard smooth blade, useful for varied prep outcomes
• Quick to swap out between prep tasks with minimal downtime
• Should be inspected regularly for wear and stored safely when not in use

This is a straightforward addition for any kitchen already running an R301 or R301 Ultra that handles a varied range of raw ingredients. Blade fitting and handling should follow the manufacturer's guidance, and any blade showing visible wear or damage should be taken out of service without delay.

If you are unsure which blade configuration suits your prep requirements, we are happy to talk it through.

The Robot Coupe 27555 is a genuine 2mm slicing disc designed to work with a specific range of Robot Coupe bowl cutters and vegetable preparation machines, including the R101, R201, R211, R301, R401, R402 and CL40. It is a replacement or additional disc for kitchens already running compatible equipment, not a standalone product.

A 2mm cut sits at the finer end of the slicing range. It is well suited to tasks where thinness and uniformity matter — cucumber and courgette garnishes, potato gratin, dressed salads, and any presentation work where a thicker slice would look out of place. At this thickness, cut quality is noticeably affected by disc condition, which is one reason to stay with a genuine manufacturer part rather than a generic alternative.

In day-to-day prep, having the right disc to hand keeps the workflow moving. The practical advantages include:

• Fine, consistent 2mm slices across a broad range of vegetables
• Direct fit with compatible Robot Coupe machines — no adaptation needed
• Genuine construction maintains cut quality and supports hygiene standards
• Quick to swap between disc types during multi-task prep sessions
• Reduces hand-knife time on high-volume fine-slicing tasks

There are no installation requirements beyond confirming your machine is one of the listed compatible models. Disc compatibility is not universal across the Robot Coupe range, so if you are running a model not listed above, it is worth checking before you order.

If you are unsure whether the 27555 fits your machine, or whether a different cut thickness would better serve your prep workflow, we are happy to work through that with you.

The Robot Coupe 27395 is a citrus press attachment designed specifically for the R301, R301 Ultra, and R401 food processor models. Rather than a standalone appliance, it connects directly to the processor's existing drive, allowing operators to extract fresh citrus juice using equipment already on the counter. It is a practical way to extend what your machine can do without committing to additional bench space, a separate power point, or further capital expenditure.

In service, the attachment performs reliably for regular but moderate citrus volumes — fresh orange juice at breakfast, lemon and lime juice for pastry or sauce work, or citrus prep running alongside bar operations. It is worth being straightforward about its limits, however. If your kitchen needs to press large quantities of citrus at pace — crates of oranges for a hotel breakfast service, for instance — a dedicated high-throughput juicer will serve you better. This attachment is designed to complement an existing prep workflow, not to substitute for specialist juice equipment at volume.

For kitchens already running a compatible Robot Coupe model, the practical advantages are clear:

• Adds citrus juicing to your prep station without an additional machine or footprint
• Suits operations where citrus prep is a regular but measured part of the daily workload
• Eliminates duplicate motor and counter space by using the existing processor drive
• Straightforward to fit and remove during normal prep changeovers

Compatibility is the key consideration before purchasing. This attachment fits the R301, R301 Ultra, and R401 only — it is not a universal fit across the Robot Coupe range. If you are unsure whether your current machine is compatible, or you are weighing this against a standalone citrus press for your service volumes, the team is happy to help you work through which option makes more practical sense for your kitchen.

The Sirman MSC06AMOI is a kneading knife attachment designed for use with the Sirman 6VT food processor. It fits directly into the bowl assembly and is intended for dough mixing tasks, working with the machine's drive to fold and develop dough during the mixing cycle.

In a working kitchen, having the correct bowl tool makes a material difference to the quality and consistency of mixed dough. A kneading knife works differently from a standard mixing blade — it engages dough in a way that encourages gluten development without overworking the mix, which matters when producing bread doughs, pizza bases, or similar products to a consistent standard across a busy prep shift.

As a genuine Sirman accessory, this knife is matched to the 6VT's bowl dimensions and drive coupling, so fit and operation should be straightforward without any modification or adaptation.

It is worth confirming compatibility before ordering if you are unsure which variant of the 6VT you have, as Sirman has produced more than one iteration of this machine over time. If your prep volumes have grown and you find a single bowl attachment is limiting throughput, it may be worth considering whether a larger-capacity processor better suits your current output requirements.

If you are unsure whether this is the right part for your machine, or want to check availability before ordering, feel free to get in touch with the team — it is a straightforward query and worth confirming first.

The Robot Coupe 27061 is a genuine replacement fine serrated blade, compatible with the R101, R201, R201 Ultra, R211, and R211 Ultra bowl cutter and food processor models. It is a supplementary cutting accessory for tasks where the standard smooth blade produces a less tidy result — particularly when working with fibrous vegetables, firm cooked meats, or herbs that benefit from a cleaner, more controlled cut rather than a compressing or bruising action.

In a working kitchen, both blade condition and blade choice affect the consistency of the finished product. A fine serrated edge grips and draws through ingredients rather than pushing against them, which becomes especially noticeable when presentation and texture matter. Many operators running compatible Robot Coupe machines keep both blade types to hand and switch between them depending on what is being prepped that session.

• Genuine Robot Coupe part — correct fit and performance across compatible models
• Fine serrated edge handles fibrous ingredients where smooth blades tend to struggle
• Quick blade swap keeps prep moving without interrupting service
• Helps maintain cut consistency as a working blade ages with use
• Complements rather than replaces the standard blade supplied with the machine

This blade is designed specifically for the R101, R201, R201 Ultra, R211, and R211 Ultra series. Blade compatibility is not shared across all Robot Coupe processor lines, so it is worth confirming your exact model before ordering. Using a blade not specified for your machine risks poor cutting performance and potential damage to the bowl or drive coupling.

If you would like to talk through which blade suits your prep requirements, or want to confirm compatibility with your current machine, we are glad to help.

The Robot Coupe 27087 is a genuine 5mm slicing disc designed for use with a range of Robot Coupe bowl and continuous-feed processors, including the R101, R201, R211, R301, R401, R402, and CL40. It fits directly into the disc carrier on compatible machines and produces uniform 5mm slices from vegetables, fruits, and charcuterie with consistent results across a full batch.

In a working kitchen, slice thickness has a direct bearing on cooking times, portion yields, and how much remedial work ends up at the pass. A 5mm cut sits in a practical mid-range — substantial enough to hold its shape during roasting or gratin work, fine enough for composed salads and layered preparations. Robot Coupe discs are manufactured to close tolerances, which means cut quality holds throughout a full batch rather than drifting as the disc works through volume. That consistency matters most when prep is running at speed and quality control is harder to maintain by eye.

• Produces clean, uniform 5mm slices with minimal cell damage
• Reduces prep time significantly compared to hand-slicing at volume
• Consistent output supports portion control and predictable cooking results
• Fits and removes quickly during multi-task prep sessions
• Genuine Robot Coupe part maintains full compatibility and safety ratings

It is worth confirming your processor model before ordering. Disc carrier design can vary between generations of the same model, and a disc listed for a given range will not always fit every variant within it. If there is any uncertainty about compatibility with your machine, the team is happy to check before you place an order.

This is the dedicated cutter bowl for the Sammic K-41, KE-4V, CK-241, and CK-24V cutter and combi cutter-mixer models. It is also the component that allows a CA-21 or CA-2V vegetable preparation machine to be upgraded into a combi model, expanding what that machine can do without replacing it entirely. The hub with blades is a separate purchase and is not included with the bowl.

In practical terms, having a second bowl available means operators can move between tasks without stopping to clean down mid-service — one bowl can be in use while another is being prepared or washed. For kitchens processing sauces, pastes, forcemeats, or emulsified mixes alongside vegetable prep work, that continuity matters when time is tight.

This bowl is a genuine Sammic part, which means it is matched correctly to the tolerances and drive mechanism of the machines it is designed for. Fitting non-OEM bowls to precision food processors carries a risk of uneven blade engagement and wear on the drive coupling, so sourcing the correct part is worth doing properly.

It is worth confirming your exact machine model before ordering — the K-41 and KE-4V are closely related but it is always sensible to cross-reference your serial number if there is any doubt. If you are unsure whether this bowl is the right fit for your machine, or whether upgrading your CA-21 to a combi configuration makes sense for the work you are doing, our team is happy to talk it through.

The Sammic FCOS rippled slicing disc is a purpose-made accessory for Sammic's CA-21, CA-2V, CK-241, and CK-24V food processor models. Rather than producing a flat cut, the rippled blade profile creates a textured, ridged slice — commonly used for vegetables such as cucumbers, courgettes, and potatoes where presentation or sauce adhesion benefits from the additional surface texture.

As a manufacturer-matched disc, it is designed to seat correctly and run safely within the compatible Sammic bowl assemblies. Using the correct disc for your model matters both for safety and for consistent slicing quality, so it is worth confirming your processor model before ordering.

In practical kitchen use, rippled discs are popular in high-throughput salad preparation, buffet and deli operations, and anywhere that a uniform textured slice adds value to the finished dish. The disc itself is a consumable-adjacent item — it will wear over extended use, and operators running high daily volumes should keep a spare to hand to avoid disruption during service.

Please note that disc appearance may vary slightly from product images, as Sammic periodically updates disc design without changing the functional specification.

If you are unsure whether this disc is compatible with your specific machine configuration, or if you are looking at building out a fuller set of discs for your processor, we are happy to help you work through the right options.

The Sammic Déli-Cut cutting kit is an accessory set designed for use with Sammic's Compact Line vegetable preparation and combi machines. It combines a julienne disc and a grid disc, giving operators a straightforward way to produce consistent cuts suited to a range of kitchen prep tasks — from julienne strips and diced vegetables to salad components and stuffing fillings.

In a working kitchen, the value of a well-matched cutting kit lies in consistency and speed. Rather than knife-cutting to varying results under time pressure, the Déli-Cut attachments produce uniform output pass after pass, which matters both for presentation and for even cooking times. The kit is designed to work with the inner collecting container included with compatible Sammic machines, keeping prep contained and reducing mess during high-volume runs.

Practical benefits for kitchen operators include:

• Julienne disc produces consistent strip cuts for stir-fries, garnishes, and salads
• Grid disc enables diced and block cuts for fillings, sautéed vegetables, and bulk prep
• Designed to work within the Compact Line system for straightforward changeover
• Uniform cut size supports even cooking and consistent plating
• Reduces manual knife prep time during busy service periods

This kit is worth considering for any kitchen already running a compatible Sammic Compact Line machine that wants to expand its prep cutting options without investing in additional standalone equipment. It is particularly useful in sites handling mixed vegetable prep across several dishes. If your output volumes are higher or your prep requirements more demanding, Sammic's larger-capacity machines and corresponding accessory ranges may be a better fit.

If you're not certain whether this kit is compatible with your existing Sammic machine, or you'd like guidance on which cutting attachments suit your prep volumes, our team is happy to help you work through it.

This ejecting disc is a purpose-made accessory for Sammic's COMPACT range of vegetable preparation machines, specifically the CA-21, CA-2V, CK-241 and CK-24V models. Its function is straightforward: it controls the ejection of processed leafy vegetables from the machine, ensuring that produce such as cabbage, kale and lettuce exits cleanly and consistently rather than bunching or jamming at the outlet.

In a working kitchen, that reliability matters. Leafy vegetables behave differently to root vegetables or firmer produce — they compress, fold and catch. A disc matched to this type of produce helps maintain throughput and reduces the interruptions that slow down prep service. Using the correct ejecting disc for the job also reduces unnecessary wear on the machine and keeps cut quality consistent across a batch.

This disc is a like-for-like replacement or supplementary accessory for kitchens that already operate one of the compatible Sammic COMPACT machines. It is not a universal fitting — it is designed for the specific models listed, and using an incorrect disc can affect both output quality and machine performance.

If you are unsure whether this disc is compatible with your current machine configuration, or if you are looking to build out a set of discs for different vegetable types, the team is happy to advise before you order.