Sammic Meat Processing Equipment

The Sammic PS-22 is a heavy-duty commercial meat mincer motor unit designed for sustained, high-volume production. It is supplied without a cutting unit or mesh plate, both of which are ordered separately. This approach allows the machine to be configured specifically for your output requirements — whether that is a coarse grind for sausage blends, a medium cut for everyday mince, or a finer texture for burger patties. All food-contact parts, including the hopper and feed components, are stainless steel throughout.

In busy butchery, deli, or food production settings, the PS-22 is capable of running continuously across a full working shift without requiring extended pauses between batches. This makes it a practical choice for operations that prepare fresh mince to order throughout the day, or that produce in bulk ahead of service. The machine handles significant hourly throughput reliably, and the build quality is consistent with Sammic's established presence in professional food preparation across European commercial kitchens.

The main operational advantages include:

• Removable cutting unit supports thorough cleaning and quick mesh changeovers between runs
• Stainless steel food-contact surfaces aid food safety compliance and daily hygiene routines
• Straightforward start-stop operation reduces training time for production staff
• High sustained output helps prevent bottlenecks during busy preparation periods
• Separate mesh selection allows mince texture to be matched precisely to each product

Because the PS-22 arrives as a motor unit only, the cutting unit and mesh size must be confirmed and ordered before the machine is operational. Mesh and cutting unit combinations need to be compatible, so it is worth mapping out your typical product range before placing an order. The unit requires a stable, weight-bearing worksurface with adequate clearance around the hopper and feed throat, and clear access for daily stripping and cleaning. Electrical supply requirements should be verified at enquiry stage.

The PS-22 is well suited to butchers, farm shops, deli counters, and food production kitchens where high-volume mincing is a routine daily task. It is equally appropriate for restaurants and catering operations that prepare mince in-house at meaningful scale. For lighter or occasional prep, a lower-capacity model from the range is likely more proportionate. For sites with substantially higher production demands, a heavier-duty machine may be worth considering.

If you would like to discuss cutting unit compatibility, mesh selection, or whether the PS-22 is the right fit for your production volumes, the team is happy to work through it with you before you place an order.

The Sammic GAE-350 is a gear-driven automatic electric slicer with a 350mm blade and a motorised carriage system driven by two independent motors — one for the blade, one for the carriage. This separation allows the machine to run through slicing cycles continuously without the operator feeding each pass manually, which makes a meaningful difference when volume is sustained over a long session.

In practice, this type of slicer earns its place in operations where slicing is a regular, high-volume task rather than an occasional one. Delicatessen counters, hotel banqueting and breakfast preparation teams, butchery sections, and production catering kitchens are the environments where the GAE-350 performs consistently. The gear-driven mechanism and life-lubricated carriage bearings are built for repeatable, reliable use across extended slicing runs, and the anodised aluminium construction holds up well under the daily demands of a working commercial kitchen.

From an operational standpoint, the key practical advantages are:

• Automatic motorised carriage removes the need for continuous manual operation during extended runs
• Built-in precision sharpener maintains blade condition without additional tooling
• Adjustable carriage run length accommodates varying product sizes, reducing reset time mid-session
• Slice counter supports portion control and production planning across a service
• Carriage lock and blade removal tool make end-of-day cleaning more thorough and manageable

The GAE-350 requires a standard single-phase electrical supply and a stable, level work surface with adequate clearance around the unit for safe product loading. The ventilated motor housing supports prolonged use, but rear clearance for airflow should not be overlooked. A dedicated slicer stand or a solid, heavy-duty bench is strongly advisable given the unit's weight and vibration during operation. Daily cleaning — covering the blade guard, ring guard, and carriage — needs to be factored into your end-of-service routine and should not be rushed.

This slicer is well suited to mid-to-high-output kitchens where consistent slice quality across large volumes matters or where manual slicing has become a bottleneck in production. Where slicing is light or infrequent, a manual or semi-automatic model represents a more proportionate investment. At the other end of the scale, operations running continuous high-throughput production lines may find a heavier-duty model a better long-term fit for their output requirements.

If you are weighing up whether the GAE-350 is the right fit for your service volume and setup, our team is glad to talk it through with you.

The Sammic GAE-300 is a gear-driven automatic electric slicer built for regular, production-level use in professional food preparation environments. It runs two independent motors — one powering the 300mm blade, one driving the carriage — so the machine feeds and slices without the operator managing each pass. The chassis is constructed from high-polished anodised aluminium, which keeps bench weight manageable while maintaining the structural rigidity a working slicer needs.

In practice, the automatic carriage drive makes a genuine difference during busy prep periods. Consistent slice thickness is held across a full tray run without operator intervention, reducing fatigue and improving throughput when working through cooked meats, cured products, or fresh cuts. The adjustable thickness range covers wafer-thin charcuterie through to portioned cuts, making the machine useful across different prep requirements rather than suited to a single product type.

The GAE-300 is designed with end-of-service strip-down in mind. All food-contact components are fully detachable, and the bearing-mounted side plate reduces food trap points — in practice, daily cleaning is more straightforward than on machines with fixed assemblies. A built-in sharpener is included as standard to maintain blade edge across the working life of the machine.

• Automatic carriage drive reduces operator effort during high-volume prep runs
• Fully detachable food-contact parts support compliant daily cleaning
• Built-in sharpener maintains consistent blade performance over time
• Adjustable thickness suits fine charcuterie through to portioned meat cuts
• Anodised aluminium build balances durability with manageable bench weight

The GAE-300 is a countertop unit requiring a standard single-phase electrical supply. Before installation, it is worth confirming you have sufficient bench depth to accommodate full carriage travel — this is easy to overlook and important for safe operation. The machine is well suited to kitchens where slicing is a regular part of the prep workflow: delis, hotel kitchens, contract caterers, and busy pub kitchens are all typical environments. For sites running extended shifts with very high throughput demands, or where the slicer will be in near-continuous use across a full production day, a heavier-duty model may be worth considering.

If you want to talk through whether the GAE-300 fits your prep volumes and working setup, the team is happy to help before you decide.

The Sammic PS-32R is a countertop meat mincer with an integrated refrigeration unit built into the machine itself. Unlike a standard bench-top mincer, the PS-32R actively maintains a controlled temperature at the cutting head and feed zone during operation. This is a practical food safety consideration rather than a premium feature — when processing larger or continuous batches, meat temperature at the cutting zone can rise to a point where it affects both product quality and compliance. The PS-32R addresses that by keeping the working temperature in check throughout the mince cycle.

In a working butcher's shop, deli, farm shop, or professional kitchen where fresh mince is prepared regularly, the ability to run extended cycles without stopping to chill the machine or rest the meat makes a genuine difference to throughput and workflow. The stainless steel hopper, plate, and knife are straightforward to disassemble and sanitise at the end of service, and the removable cutting unit keeps cleaning time manageable.

From an operational standpoint, several design details are worth noting:

• Integrated refrigeration supports HACCP compliance during extended processing runs
• Removable cutting unit simplifies cleaning and reduces turnaround time between tasks
• Stainless steel contact parts are robust and straightforward to sanitise
• Simple controls keep staff training requirements low
• Countertop format avoids the space commitment of a floor-standing unit

The PS-32R requires a suitable mains electrical supply and a solid, level bench surface with sufficient clearance around the hopper for loading and access to the cutting head for cleaning. The refrigeration mechanism adds to both the footprint and the overall weight compared with a non-refrigerated equivalent, so it is worth confirming bench strength and working height before installation. This is not a lightweight machine, and that should be factored into your bench and workflow planning from the outset.

The PS-32R is well suited to butchers' shops, delicatessens, farm shops, and professional kitchens where fresh mince is prepared on a daily basis and food safety compliance is a operational priority. Sites with modest daily throughput and no extended processing runs may find a non-refrigerated countertop model a more proportionate choice. At the other end of the scale, large central production units or high-volume meat processing operations are likely to need a heavier-duty floor-standing alternative with greater output capacity.

If you are unsure whether the PS-32R suits your volumes or working environment, the team at Advantage Catering Equipment is happy to talk through your requirements before you commit.

The Sammic PS-12 is a commercial meat mincer built for consistent, high-volume preparation in professional kitchens and food retail environments. It can be counter-mounted or floor-standing depending on your workspace, and is designed to handle sustained mincing sessions without becoming a bottleneck during busy production periods.

In practice, the PS-12 performs reliably across longer mincing runs. The aluminium cutting unit maintains consistent output without significant slowdown, and the stainless steel hopper and body are durable enough to handle the daily rigour of commercial food preparation — including the frequent cleaning that meat processing equipment demands. The machine is supplied with a cutter knife and 6mm mesh plate as standard, with additional mesh sizes available if you need to vary mince texture for different menu items or products.

From a day-to-day operational standpoint, the PS-12 is straightforward to work with:

• Easy-to-remove cutting unit simplifies post-service cleaning and reduces turnaround time
• Removable stainless steel hopper supports thorough sanitation to meet food hygiene requirements
• Simple start-stop switch keeps operation accessible for kitchen staff at any level
• Interchangeable mesh plates allow different mince textures from a single machine

Installation is uncomplicated — the PS-12 requires a standard electrical supply and a stable, level work surface or stand capable of supporting the machine under load. Having drainage nearby and easy access to cleaning facilities will make daily maintenance considerably more practical. It is worth ensuring the hopper can be loaded at a comfortable working height for your staff, particularly during longer prep runs.

The PS-12 is well suited to independent restaurants, pub kitchens, hotel operations, and food retail environments such as butchers or deli counters that mince regularly but do not require continuous industrial-scale throughput. Sites running extended, high-volume continuous production may find a heavier-duty model with a larger motor and feed throat a better long-term fit.

If you would like to talk through whether the PS-12 suits your prep volumes or kitchen setup, the team is happy to help you work that out before you order.