Santos

This is the replacement 8mm grating disc for the Santos CF600 electric cheese grater (model 02A). It is a genuine Santos accessory, designed to fit the CF600 directly and restore the machine to full working order when the original disc becomes worn or damaged.

In a busy kitchen, grating discs take a significant amount of wear over time. An 8mm disc produces a medium-coarse grate suitable for a range of hard and semi-hard cheeses, and it is worth keeping a spare on hand to avoid any interruption to service. Swapping the disc is straightforward, which means downtime is minimal when a replacement is needed.

A few practical points worth noting: this disc is compatible specifically with the Santos CF600 (02A) grater — it is not a universal fitting and will not suit other Santos models or third-party graters. If you are unsure which disc size best suits your output requirements, Santos also produce discs in other grating sizes for the same machine.

If you have any questions about compatibility or which disc size is right for your operation, the team is happy to help before you order.

This is a genuine Santos replacement bowl designed specifically for use with the Santos centrifugal juicer GH739. As an original manufacturer part, it is intended to restore the juicer to full working condition without the fitment or performance concerns that can arise with non-genuine alternatives.

In a busy juice bar, café, or kitchen where the GH739 is in daily use, wear to the bowl is a normal consequence of high-volume service. Having a genuine replacement to hand minimises downtime and avoids the need to take the machine out of service for longer than necessary.

If you are unsure whether this bowl is compatible with your specific Santos model, or if your machine is an earlier or later variant, it is worth checking with us before ordering. Santos have produced several juicer models over the years and compatibility can vary between generations.

This is the manufacturer-matched replacement grating disc for the Santos Model 02A electric cheese grater, also referenced as the CF600. The disc fits directly into the machine without modification and restores the grater to its original output specification.

Grating discs are consumable items in any busy kitchen — repeated use against hard cheeses gradually dulls the cutting surface, reducing throughput and increasing the load on the motor. Replacing the disc at the right interval keeps the machine running efficiently and helps extend the working life of the unit itself.

The 6mm perforation size is well suited to general grating tasks, producing a medium-coarse texture appropriate for gratin toppings, pizza, pasta dishes, and bulk cheese preparation. It is the standard disc supplied with the 02A and the most commonly requested replacement.

Fitting is straightforward for anyone already familiar with the machine. If there is any uncertainty about compatibility with a modified or older unit, it is worth checking before ordering — our team are happy to confirm the correct disc for your specific machine.

This is the complete replacement bowl and blade assembly for the Santos Bar Blender 33, supplied in grey. It is a genuine replacement part designed to restore the blender to full working order where the original bowl or blades have become worn, damaged, or lost.

Having the correct replacement bowl to hand is straightforward maintenance practice in any busy bar or kitchen environment. Blender bowls and blades take considerable wear over time, particularly in high-throughput operations where the unit is in near-constant use across a service period. Using the manufacturer-matched assembly ensures the fit, seal, and blade geometry remain as the machine was designed to perform.

This bowl and blade set is confirmed to fit the Santos Bar Blender 33. If you are unsure whether this assembly is compatible with your specific unit, or if you need guidance on which Santos blender accessories are appropriate for your setup, the team is happy to help clarify before you order.

The Santos fondue disc is a replacement cutting disc designed for use with the Santos CF600 electric cheese grater (Model 02A). It fits directly into the existing grater unit and is intended for operators who need to restore or extend the function of their current machine without replacing the whole unit.

In a working kitchen, cutting discs take the brunt of daily use. Over time, the cutting edges dull and throughput slows — a worn disc on a busy cheese grater can quietly become a bottleneck during service. Having a reliable replacement disc to hand means the grater can be returned to full performance quickly rather than being taken out of action.

• Direct replacement for the Santos CF600 (Model 02A) grater
• Restores grating performance on a worn or damaged machine
• Keeps the existing unit in service rather than requiring full replacement
• Suited to fondue-style grating applications

As this is an accessory disc, no additional electrical or installation work is required — it fits into the existing Santos CF600 unit. It is worth confirming your grater model before ordering, as Santos produce several disc types and grater variants, and not all discs are interchangeable across the range.

This disc is best suited to operators already running a Santos CF600 cheese grater who need a like-for-like replacement. If your operation has moved on and you are considering a different grater or additional capacity, it may be worth a conversation before committing to accessories for the existing unit.

If you are unsure whether this disc matches your current machine, our team is happy to help you confirm compatibility before you order.

This is a replacement 3mm grating disc designed specifically for the Santos CF600 electric cheese grater (Model 02A). It is a direct spare part intended to restore the machine to full working order when the original disc becomes worn or damaged.

In a busy kitchen, grating discs take considerable punishment. Regular use against hard cheeses and similar ingredients will eventually dull the cutting edges or cause surface wear, and a degraded disc affects both the quality of the grated output and the efficiency of the machine. Keeping a spare on hand is straightforward good practice, particularly in operations where the CF600 is in daily use.

The 3mm perforation produces a fine, consistent grate suited to dishes where texture matters — gratins, pizza toppings, pasta finishes, and similar applications. Fitting the correct disc for your intended output is important; a 3mm disc is a fine grade and may not be the right choice for coarser grating tasks, for which a larger disc would be more appropriate.

This disc is compatible only with the Santos CF600 (Model 02A). It will not fit other Santos models or third-party graters. If you are unsure whether this is the correct part for your machine, it is worth checking your model number before ordering.

If you need help identifying the right disc size for your application, or if you are sourcing parts for a different Santos model, feel free to get in touch with the team.

This is a genuine Santos replacement jug in red, designed as a direct replacement or additional jug for use with the Santos brushless commercial blender. Santos replacement jugs are manufactured to the same standards as the original equipment, ensuring a proper fit and consistent performance rather than the compromises that can come with third-party alternatives.

In a busy service environment, having a spare jug available is a straightforward way to maintain throughput. Rather than pausing to rinse and dry between batches, staff can swap jugs and keep service moving, then clean at a more practical point. This is particularly useful during peak periods in juice bars, cocktail bars, restaurant kitchens, and café operations where blending is a regular part of the menu.

• Genuine Santos part — correct fit for compatible brushless blender models
• Red colour coding supports allergen or ingredient separation protocols
• Allows back-to-back blending without interruption for cleaning
• Maintains the same performance characteristics as the original jug
• Straightforward to disassemble and clean to commercial hygiene standards

It is worth confirming compatibility with your specific Santos blender model before ordering. Santos produces several blender variants and jug fittings are not always interchangeable across the full range. If you are unsure which jug corresponds to your machine, our team can help verify the correct part.

This jug is best suited to operations already running a Santos brushless blender who need a replacement or an additional jug for workflow purposes. The colour coding in red makes it a practical choice where kitchens use colour separation for allergen management or ingredient categorisation.

If you would like to confirm compatibility with your existing equipment before placing an order, we are happy to help.

This is the XL replacement jug for the Santos #66 brushless blender, offering a larger working capacity than the standard jug for kitchens with higher blending volumes. It is a genuine Santos accessory, designed to fit and function correctly with the #66 model, and is the straightforward choice when the standard jug no longer meets throughput demands or simply needs replacing.

In busy prep environments, having the right jug capacity makes a practical difference. The larger volume means fewer batch cycles when working through high quantities of soups, sauces, smoothies, or blended bases during prep service — reducing handling time and keeping workflow moving. The transparent sides allow the operator to monitor consistency and texture without stopping the process, and the dual litre and ounce graduations support consistent portioning across a shift.

• Larger capacity suits high-volume batch blending during prep
• Transparent sides for visual monitoring without interrupting blending
• Dual litre and ounce markings support consistent, repeatable results
• Stackable design keeps storage tidy in space-limited kitchens
• Genuine Santos accessory — correct fit for the #66 brushless blender

It is worth confirming your Santos blender model before ordering. This jug is compatible with the Santos #66 brushless blender and may not be suitable for other Santos models. If you are unsure which jug or blender configuration is right for your kitchen's output, the team is happy to help you work that out.

This is the complete replacement jug for the Santos DN638 commercial blender. If a jug becomes cracked, damaged, or lost in a busy service environment, this part allows operators to return the machine to full working order without replacing the entire unit.

Beyond that, we have very limited product detail available for this item at present. Before ordering, it is worth confirming that your blender is the DN638 model and that this jug assembly is the correct replacement for your specific unit configuration.

If you are unsure whether this is the right part, or if you need to discuss compatibility with your existing Santos equipment, the team is happy to help point you in the right direction.

This is a replacement bowl mounting designed for use with the Santos No 52 juicer, compatible with models CK690 and CK691. It is a like-for-like replacement component intended to restore a worn or damaged unit to working order.

If you are unsure whether this is the correct part for your machine, or if you have a Santos juicer outside the CK690 and CK691 range, it is worth getting in touch with the team before ordering to confirm compatibility.

This is the genuine Santos complete bowl assembly for the #66 blender (model DM499), supplied with an integrated foam milk agitator. The agitator attachment allows operators to produce cold milk froth directly in the bowl, making it a practical addition for cafés and coffee-focused operations that want frothed milk without a separate piece of equipment.

In a busy service environment, having the correct bowl assembly to hand matters. The foam milk function works quickly, which helps maintain pace during peak periods without creating a bottleneck at the drinks station. Because this is a genuine Santos part, fit and performance are consistent with the original specification of the machine.

• Genuine Santos bowl assembly designed specifically for the #66 blender
• Foam milk agitator produces cold milk froth without additional equipment
• Compatible with model DM499 only — confirm your model before ordering
• Suitable for café and beverage service environments handling regular volume

This bowl is designed exclusively for the Santos #66 (DM499). It is not a universal fit, so it is worth confirming your exact blender model before purchasing. If you are unsure whether this part matches your machine, or if you are looking at a replacement for a different Santos model, our team is happy to help you identify the right component.

This is the replacement centrifugal blade disc for the Santos Juicer Miracle Edition (GH739), referenced as Santos part 68202. The disc is the primary cutting component within the centrifugal juicer, responsible for shredding fruit and vegetables at high speed so juice can be separated efficiently during service.

In a busy juice bar, café, or kitchen environment, the centrifugal blade is subject to sustained wear. Over time and with regular use, blade sharpness diminishes and extraction efficiency drops — resulting in lower juice yield, increased pulp in the output, and longer processing times. Replacing the disc at the right interval restores the machine to its original extraction performance.

Keeping a spare blade disc on hand is a straightforward way to avoid unplanned downtime. A blunt or damaged disc can often be the cause of inconsistent juice quality before operators realise the component needs attention.

This part is compatible specifically with the Santos GH739 Juicer Miracle Edition. If you are unsure whether this disc fits your model, or if you operate an older or different Santos centrifugal juicer, it is worth checking compatibility before ordering — our team are happy to advise.

This is the genuine Santos replacement jug for the DM499 brushless blender, supplied under part reference 66100. It is a like-for-like original component, intended to restore a worn or damaged blender to full working order without compromising the performance characteristics of the machine.

Santos brushless blenders are a common sight in commercial bars, cafés, and restaurant kitchens where consistent blending output is required across a busy service. The jug takes the same punishment as the motor unit itself — repeated high-speed blending of ice, frozen fruit, and dense ingredients takes its toll over time. Having a replacement jug to hand reduces downtime when a jug cracks, chips at the base seal, or the blade assembly becomes unreliable.

As a genuine Santos part, this jug is designed to seat correctly on the DM499 motor base and align with the blade and coupling as the original. Non-genuine alternatives can introduce fitment issues that affect seal integrity and blending performance, so specifying the correct part reference matters.

This jug is suitable for operators running the DM499 brushless blender who need a direct replacement. It is worth confirming your blender model before ordering, as Santos produces several blender variants and jug compatibility is model-specific.

If you are unsure whether this is the correct jug for your machine, or if you are considering a full blender replacement rather than a parts repair, feel free to get in touch — we are happy to help you work out the most practical route.

The Santos 62A Yellow Jug (62100Y) is a direct replacement container for the Santos 62A commercial blender, manufactured in BPA-free materials and supplied in yellow as part of a colour-coded allergen management system.

In busy kitchens where multiple blended recipes are prepared throughout service, the risk of allergen cross-contact through shared equipment is a genuine operational concern. Colour-coded containers offer a straightforward, practical way to manage this — assigning specific colours to recipes that contain common allergens such as nuts, soy, or dairy helps kitchen teams identify the correct jug at a glance, without relying solely on labelling or verbal instruction.

The practical benefits of using a dedicated colour-coded jug include:

• Reduces the risk of allergen cross-contact between blended recipes
• Supports visual allergen management protocols for kitchen teams
• BPA-free construction suitable for food contact use in commercial environments
• Direct fit for the Santos 62A blender — no adaptation required
• Allows simultaneous use of multiple jugs across different allergen categories

No installation considerations apply beyond confirming compatibility with the Santos 62A blender. This jug is not compatible with other Santos models, so it is worth checking the blender model number before ordering.

This jug is well suited to any kitchen operating the Santos 62A that handles allergen-containing recipes alongside allergen-free preparations — particularly relevant in settings with strong allergen control obligations such as schools, hospitals, or establishments catering to guests with dietary requirements.

If you are building out a full colour-coded system across your kitchen or have questions about allergen management and equipment, the team is happy to help you think it through.

This is the genuine Santos replacement bowl assembly for the #62 blender (DN638), supplied complete with a foam milk agitator attachment. The agitator is designed to produce cold milk froth directly in the bowl, making it a practical addition for cafés and coffee service operations that want to extend the capability of their existing Santos #62 unit without additional equipment.

In a busy service environment, the ability to froth cold milk quickly and consistently matters. The integrated agitator delivers results in a short cycle, which suits counter service settings where speed and repeatability are both important. Because this is a complete bowl assembly rather than a retrofit part, it installs straightforwardly and is ready to use with the existing #62 base.

Key practical points worth noting:

• Genuine Santos part — correct fit and material compatibility with the #62 base unit
• Foam milk agitator included as part of the complete bowl assembly
• Suitable for cold milk frothing applications
• Designed for use with the Santos #62 blender (DN638)
• Replacement or additional bowl — useful where multiple bowls support faster service turnover

This bowl is a direct replacement or spare for operators already running the Santos #62. It is not compatible with other Santos models, so it is worth confirming your blender model reference before ordering. If you are unsure whether this is the right accessory for your setup, or if you are considering the #62 blender as part of a wider counter equipment specification, the team is happy to help.

This is the replacement co-polyester bowl for the Santos DN636 and DN637 blenders. It comes supplied as a complete assembly — bowl, stainless steel blade, and lid included — so you can return your blender to service without sourcing parts separately. Co-polyester is a practical choice for commercial use: it offers good impact resistance and is considerably lighter than glass, which matters in a fast-moving kitchen environment.

In day-to-day service, having a spare bowl in stock is a straightforward way to reduce downtime. A damaged or worn bowl is one of the more common reasons a commercial blender is taken out of use, and sourcing the correct replacement promptly keeps the machine earning its place in the kitchen. The stainless steel blade included with this bowl is matched to the DN636 and DN637 motor units, so fitment and performance are consistent with the original specification.

This bowl is best suited to operations already running the Santos DN636 or DN637 blender and needing a direct like-for-like replacement. It is not compatible with other blender models, so it is worth confirming your model number before ordering. If you are unsure which bowl is correct for your machine, or if you are looking at blender options more broadly, the team is happy to help you identify the right part.

The Santos 62A Red Jug (62100R) is a replacement blending container designed specifically for use with the Santos 62A commercial blender. It is manufactured from BPA-free material and supplied in red to support colour-coded allergen management in professional kitchen environments.

In busy kitchens where multiple blended recipes are produced during service, the risk of allergen cross-contact is a genuine operational concern. Dedicating a specific coloured jug to recipes containing common allergens — such as nuts, soy, dairy, or gluten — provides a clear, practical visual control that staff can apply consistently under pressure. Red is a widely recognised colour in food safety colour-coding systems, making this jug a straightforward fit for existing allergen protocols.

• BPA-free construction suitable for food contact use
• Red colour supports allergen colour-coding and cross-contact prevention
• Compatible replacement for the Santos 62A blender
• Helps reinforce allergen management procedures across kitchen teams

This jug is a direct replacement part and fits the Santos 62A blender only. It is worth confirming your blender model before ordering to ensure compatibility.

If you operate across multiple allergen categories and are considering a broader colour-coded set, or if you have questions about allergen management accessories for your kitchen, we're happy to help you work through the options.

This is the black squeezer cone (bulb) designed as a direct replacement part for the Santos high-output orange juicer. The cone is the primary contact point during juicing — it sits on the reamer and applies pressure to the fruit half to extract juice. Over time and under heavy daily use, cones wear and should be replaced to maintain extraction efficiency and hygiene standards.

In a commercial setting, a worn or damaged squeezer cone reduces juice yield and can leave more pith and pulp in the output, affecting both quality and consistency during service. Keeping a spare cone available is straightforward preventative maintenance for any operation running the Santos juicer through regular service periods.

• Direct replacement part for the Santos high-output orange juicer
• Maintains consistent juice yield and output quality
• Easy to swap out with no specialist tools required
• Black colourway for identification alongside other Santos cone variants
• Supports good hygiene practice through regular part replacement

This cone is suited to any operator currently running a compatible Santos juicer — whether in a café, hotel breakfast service, restaurant, or juice bar. It is a consumable part and it is worth having a replacement to hand rather than waiting for one to arrive mid-service.

If you are unsure whether this cone is compatible with your specific Santos model, or if you need guidance on other service parts for your machine, feel free to get in touch with the team before ordering.

This is the replacement juicer bowl designed for use with the Santos K275 juicer. It is a spare or replacement part rather than a standalone appliance, intended for operators who need to restore a K275 to full working order following damage or wear to the original bowl component.

Without confirmed specification data for this part, we would strongly recommend contacting us before ordering to confirm compatibility with your specific K275 unit and to ensure this is the correct bowl for your machine variant. Santos equipment occasionally spans model revisions, and fitting the wrong bowl can affect both performance and safety.

If you are unsure whether this part is correct for your machine, or if you are looking for a fuller range of Santos spares and accessories, our team is happy to help identify the right component and advise on lead times.

This is the replacement bowl cover for the Santos cold drinks dispensers, compatible with models K279 and K280. It is a like-for-like spare part intended to restore or maintain the correct function of your existing dispenser rather than a standalone product.

If you are unsure whether this is the correct cover for your machine, or if you need guidance on sourcing other Santos spare parts, the team is happy to help confirm compatibility before you order.

This plastic filter grid is a replacement component designed for use with the Santos Classic Juicer. It sits within the juicing mechanism and is responsible for separating juice from pulp during extraction, maintaining the output quality that operators expect from the machine.

Keeping a spare filter grid on hand is a practical consideration for any site running a Santos Classic Juicer regularly. In busy service environments, this type of component can wear or become damaged over time, and having a replacement available helps avoid unnecessary downtime.

If you are unsure whether this grid is the correct part for your specific model, or if you need guidance on other Santos accessories and consumables, the team is happy to help you confirm compatibility before you order.

The Santos T1 slicing disc is a 1mm thickness disc designed for use with Santos vegetable slicers. It produces fine, uniform slices suitable for ingredients that require a very thin, consistent cut — such as radishes, cucumbers, fennel, or courgettes prepared for garnish or fine salad work.

In a prep kitchen environment, consistent slice thickness matters not only for presentation but for even cooking and portioning. A 1mm disc sits at the finer end of the slicing range and is best suited to applications where precision is the priority rather than high-speed bulk throughput. For kitchens processing larger volumes at a coarser setting, other disc options within the Santos range will be more appropriate to day-to-day needs.

Practical advantages of having the correct disc for the job include:

• Uniform 1mm slices that reduce hand-preparation time on fine garnish work
• Compatible with Santos vegetable slicer machines already in use in the kitchen
• Straightforward disc swap when moving between preparation tasks
• Consistent output that supports portion control and plating standards

It is worth confirming compatibility with your specific Santos slicer model before ordering, as disc fitment can vary across the Santos range. If you are unsure which disc gauge best suits your menu or prep volume, or whether this disc is the right fit for your machine, the team is happy to advise.

The Santos obturator is a replacement component designed for use with the Santos cold drinks dispenser range. It forms part of the dispensing mechanism and will need replacing as part of routine maintenance or following wear during service.

If you are unsure whether this is the correct part for your machine, or if you need guidance on fitting, our team is happy to help — please get in touch before ordering.

This is a replacement bowl locking nut for the Santos D5 cold drinks dispenser range. If you are unsure whether this part is correct for your specific machine or serial number, we would recommend checking with us before ordering to avoid unnecessary delays.

This stainless steel cup is a replacement or spare accessory designed for use with the Santos Automatic Citrus Juicer. It is intended to collect juice output during service and is constructed from stainless steel for durability and hygiene in a commercial environment.

Beyond its material and intended compatibility, we do not currently hold sufficient specification detail to describe this accessory fully — including confirmed cup capacity, exact model compatibility across the Santos range, or whether it is suited to all variants of the Santos Automatic Citrus Juicer. We would not want to state something inaccurate that leads to an incompatible purchase.

If you are unsure whether this cup is the correct fit for your existing Santos juicer, or if you need a spare part matched to a specific model, the team is happy to help confirm compatibility before you order.

The Santos T4 is a 4mm slicing disc designed for use with compatible Santos vegetable slicers. It fits into the slicer's disc carrier and produces uniform slices at a consistent 4mm thickness, making it a practical choice for kitchens that need repeatable results across high volumes of vegetable prep.

In a busy kitchen environment, consistent slice thickness matters — not just for presentation, but for even cooking times and portion control. A 4mm cut is well suited to applications such as courgettes, cucumbers, fennel, beetroot, mushrooms, and similar produce where a medium-fine slice is required. It sits between a paper-thin garnish cut and a chunkier roasting slice, making it one of the more versatile thicknesses in a slicer disc set.

Changing discs between prep tasks is straightforward, and keeping a range of thicknesses to hand allows the same machine to cover multiple menu requirements without additional equipment. The T4 disc is a direct Santos replacement or supplementary part, so compatibility with the slicer is assured when used with the correct Santos machine.

It is worth confirming which Santos slicer model you are running before ordering, as disc compatibility can vary across the Santos range. If you are building out a set of discs for a new or existing Santos slicer and are unsure which thicknesses best suit your menu, our team is happy to talk through the options with you.

The Santos Fiber Pushing Pin D6 is a replacement component for Santos automatic citrus juicers. The pushing pin plays a role in guiding fruit pulp and fibre through the juicing mechanism, helping the machine operate as intended and maintain consistent juice yield during service.

In a busy bar or kitchen environment, juicer components are subject to repeated mechanical stress and contact with acidic citrus fruit. Keeping a spare pushing pin to hand is straightforward preventative practice — a worn or damaged pin can affect extraction performance and, if left unaddressed, place unnecessary strain on other parts of the machine.

This part is suited to operators who already run a Santos automatic citrus juicer and need a like-for-like replacement to restore or maintain full function. Fitting the correct pin for your specific Santos model is important, so if you are unsure whether the D6 is the right match for your machine, it is worth checking before ordering.

If you would like to confirm compatibility with your Santos juicer or need guidance on other service parts, our team is happy to help.

This is the replacement plastic drip tray designed for use with the Santos Automatic Citrus Juicer. It sits beneath the juicer to collect drips and overflow during operation, helping to keep countertops and service areas clean during busy juice service.

If you are unsure whether this tray is compatible with your specific Santos juicer model, or if you need any other Santos accessories or replacement parts, our team is happy to help you confirm the right fit before you order.

The Santos T4 is a 4mm slicing disc designed specifically for use with Santos vegetable slicers. It produces consistent, even tomato slices at a thickness well suited to plating, garnishing, and sandwich or salad preparation in a commercial kitchen environment.

Tomatoes present a particular challenge for slicing discs — the skin needs to be cut cleanly without crushing the flesh or losing juice. The T4 disc is designed with this in mind, producing slices that hold their shape under volume prep conditions rather than leaving a board full of bruised or uneven cuts.

For kitchens running a Santos vegetable slicer, having the correct disc for each task makes a genuine difference to prep consistency and speed. A 4mm cut is a practical all-round thickness for most tomato applications — fine enough for presentation work, substantial enough to hold up in a dressed salad or on a plate.

It is worth confirming disc compatibility with your specific Santos slicer model before ordering, as Santos produces several slicer variants and not all discs are universal across the range. If you are unsure which discs are compatible with your machine, or whether a different cut thickness would better suit your menu, the team is happy to advise.

The Santos R4 is a 4mm grating disc designed for use with compatible Santos vegetable slicers. It fits into the machine's disc carrier and produces a fine, uniform grate suited to a range of ingredients — hard cheeses, carrots, courgettes, beetroot, and similar firm vegetables or foods that benefit from a medium-fine texture.

In a working kitchen, having the right disc for the job makes a practical difference. A 4mm grating plate strikes a balance between speed and texture — fine enough for most garnish and salad prep without turning produce to pulp. On a busy Santos machine, swapping discs between prep runs is straightforward, and the R4 holds up well under repeated use when handled and stored correctly.

• Produces consistent 4mm grated output across a full hopper load
• Suits hard vegetables, firm fruits, and block cheeses
• Interchangeable with other Santos discs on compatible models
• Designed to maintain cut quality across extended prep sessions
• Easy to remove, clean, and refit between service periods

As with all cutting discs, this plate should be inspected regularly. Blades that have dulled or sustained edge damage will produce uneven results and put unnecessary strain on the motor. Correct storage — ideally in a disc rack or protective sleeve — extends service life considerably.

The R4 is a straightforward purchase for operators who already run a compatible Santos slicer and need a dedicated 4mm disc or a like-for-like replacement. If you're unsure whether this disc is compatible with your specific Santos model, it's worth checking with us before ordering.