Holmes Stainless Steel Sinks

The Holmes Stainless Steel Double Bowl Sink with Drainer is a fully assembled washing station built from 304 stainless steel throughout. It is 1800mm wide and 700mm deep, with the drainer on the left or the right. Choose the hand from the drop-down.

It arrives ready to install, with an upstand, a textured draining board, a bottom shelf and one standpipe. Taps are sold separately, so you can specify fittings that match your plumbing. The twin bowl layout lets one side be used for washing while the other handles rinsing or soaking, which reduces bottlenecks in busy service. At 1800mm wide it gives a useful run of workspace without the cost or lead time of a bespoke fabrication, and the 700mm depth gives more working room front to back than the 650mm model.

• Double bowl with drainer, 1800mm wide and 700mm deep
• Left hand or right hand drainer
• 304 stainless steel, fully assembled on delivery
• Upstand, textured draining board and bottom shelf
• Standpipe included, taps sold separately

Choosing the hand

On a left hand drainer the draining surface is to the left of the bowls, and on a right hand drainer it is to the right. Choose the hand that matches the direction of your workflow. Measure the available wall length carefully given the 1800mm width, and confirm your waste and water positions line up with the standpipe. At 28kg two people should position it. It suits pub kitchens, school catering, care homes and established restaurants. For very high throughput, a heavier-duty configuration may suit better. For help, call the team on 01304 827272.

The Holmes Stainless Steel Double Bowl Sink with Drainer is a fully assembled washing station built from 304 stainless steel throughout. It is 1800mm wide and 650mm deep, with the drainer on the left or the right. Choose the hand from the drop-down.

It arrives ready to install, with an upstand, a textured draining board, a bottom shelf and one standpipe. Taps are sold separately, so you can specify fittings that match your plumbing. The twin bowl layout lets one side be used for washing while the other handles rinsing or soaking, which reduces bottlenecks in busy service. At 1800mm wide the unit gives a useful run of workspace without the cost or lead time of a bespoke fabrication.

• Double bowl with drainer, 1800mm wide and 650mm deep
• Left hand or right hand drainer
• 304 stainless steel, fully assembled on delivery
• Upstand, textured draining board and bottom shelf
• Standpipe included, taps sold separately

Choosing the hand

On a left hand drainer the draining surface is to the left of the bowls, and on a right hand drainer it is to the right. Choose the hand that matches the direction of your workflow before ordering. Measure the available wall length carefully given the 1800mm width, and confirm your waste and water positions line up with the standpipe. At 26kg two people can position it. It suits pub kitchens, school catering, care homes and established restaurant kitchens. For very high throughput, a larger or heavier-duty configuration may suit better. For help, call the team on 01304 827272.

The Holmes Stainless Steel Double Bowl Sink with Drainer is a fully assembled, ready-to-install unit for commercial pot wash and general kitchen duties. It is 1500mm wide and 600mm deep, built from 304 stainless steel throughout, with the drainer on the left or the right. Choose the hand from the drop-down.

It has two bowls, a textured draining board, an integrated upstand and a bottom shelf. A single standpipe is included, and taps are sold separately so you can specify the fitting that suits your plumbing. Two bowls let staff separate washing from rinsing or soaking, and the textured drainer channels water away rather than letting it pool. The bottom shelf keeps cleaning materials off the floor.

• Double bowl with drainer, 1500mm wide, 600mm deep
• Left hand or right hand drainer
• 304 stainless steel, fully assembled on delivery
• Upstand protects the wall behind the unit
• Standpipe included, taps sold separately

Choosing the hand

On a left hand drainer the draining surface is to the left of the bowls, so staff work right to left. A right hand drainer is the reverse. Check this against your kitchen layout before ordering. The unit needs hot and cold water and a standpipe waste connection, and at 21kg two people can position it. It suits cafes, pub kitchens, school canteens and care home kitchens. For very high-volume sites, a wider or heavier-duty configuration may suit better. For help, call the team on 01304 827272.

The Holmes Stainless Steel Single Bowl Sink with Drainer is a fully assembled commercial sink built in York from 304 stainless steel. It is 700mm deep and comes in 1200mm and 1500mm widths, with the drainer on the left or the right. Choose the width and the hand from the drop-downs.

The unit arrives ready to plumb in, with an upstand, a textured draining board, a bottom shelf and a standpipe. Taps are sold separately, so you can choose the fitting that suits your water supply. The 700mm depth gives a deeper working area than the 600mm model, and the wider 1500mm gives wash-up staff more room for pots, trays and utensils alongside the drainer. The all-welded stainless steel construction handles the knocks, cleaning chemicals and sustained moisture of a working pot wash.

• Single bowl with drainer, 700mm deep
• 1200mm or 1500mm wide, left hand or right hand drainer
• 304 stainless steel, fully assembled on delivery
• Upstand, textured draining board and bottom shelf
• Standpipe included, taps sold separately

Choosing the hand

On a left hand drainer the draining surface is to the left of the bowl, so items move right to left. A right hand drainer is the reverse. Confirm the hand suits your workflow before ordering. The unit needs hot and cold water and a standard waste connection, and two people can position it at 18kg or 20kg. It suits cafes, pub kitchens, school canteens, care homes and smaller restaurants. For very high-volume wash-up a double bowl or larger unit may suit better. For help, call the team on 01304 827272.

The Holmes Stainless Steel Single Bowl Sink with Drainer is a fully assembled commercial sink unit built in York from 304 stainless steel. It is 1500mm wide and 650mm deep, with the drainer on the left or the right. Choose the hand from the drop-down.

The unit arrives ready to position and connect, with an upstand, a textured draining board, a bottom shelf and a standpipe. Taps are sold separately, so you can specify the fitting that suits your water supply. At 1500mm wide the bowl and drainer give a practical run for washing and stacking pots, trays and utensils, and the textured drainer channels water away rather than letting it pool. The bottom shelf keeps cleaning materials off the floor.

• Single bowl with drainer, 1500mm wide and 650mm deep
• Left hand or right hand drainer
• 304 stainless steel, fully assembled on delivery
• Upstand, textured draining board and bottom shelf
• Standpipe included, taps sold separately

Choosing the hand

On a left hand drainer the draining surface is to the left of the bowl, so items move right to left. A right hand drainer is the reverse. Check this against your kitchen layout before ordering. The unit needs hot and cold water and a waste connection, and at 19kg two people can position it. It suits cafes, pub kitchens, school catering and similar sites. For very high volumes a larger or double bowl unit may suit better. For help, call the team on 01304 827272.

The Holmes Stainless Steel Single Bowl Sink with Drainer is a fully assembled, all-welded commercial sink built in York from 304 stainless steel. It is 600mm deep and comes in 1000mm and 1200mm widths, with the drainer on the left or the right. Choose the width and the hand from the drop-downs.

The unit arrives ready to plumb in, with an upstand, a textured draining board, a bottom shelf and a standpipe. Taps are sold separately, so you can choose the fitting that suits your water supply. The all-welded construction holds up to constant water, knocks from pots and trays, and repeated sanitising, and the smooth surfaces have few joins to harbour bacteria.

• Single bowl with drainer, 600mm deep
• 1000mm or 1200mm wide, left hand or right hand drainer
• 304 stainless steel, fully assembled on delivery
• Upstand, textured draining board and bottom shelf
• Standpipe included, taps sold separately

Choosing the hand

On a left hand drainer the draining surface is to the left of the bowl, so items move from right to left as they are washed and stacked. A right hand drainer is the reverse. Map out your wash-up workflow before ordering, because the wrong hand creates congestion at the station. The unit needs hot and cold water and a standard waste connection, and your plumber should confirm the outlet position and fall before fixing. It suits cafes, pub kitchens, small restaurants and similar wash stations. For higher volumes a double bowl or larger unit may suit better. For help choosing, call the team on 01304 827272.