Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Family Run Business Established 2001
We'll beat any genuine like-for-like quote
Trade pricing, no login needed
Public sector and account customers accepted by arrangement
Welcome to Advantage Catering Equipment
Your cart
-
Refrigeration
-
Food Preparation
-
Food Servery & Display
-
Warewashing & Laundry
-
Sinks, Tables & Storage
Drawer menu
-
Cooking
-
Refrigeration
-
Food Preparation
-
Food Servery & Display
-
Beverage Machines
-
Warewashing & Laundry
-
Sinks, Tables & Storage
-
Kitchenware
-
Front of House
Food Holding & Warming
Food holding and warming equipment keeps cooked food hot, safe and ready to serve between the pass and the plate.
Shop by category
All categories
More categories
- Cook & Hold Ovens (20)
- Heated Banquet Cabinets (8)
- Food Warmers (30)
337 products
337 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
£2,918.00(£3,501.60 inc VAT)
The Lincat Panther P8B5PT is a mobile hot cupboard combining a thermostatically controlled bain marie top with a fan-assisted heated cabinet below. It is designed for operations that need reliable food holding capacity, consistent temperatures, and the ability to reposition the unit between preparation and service without the constraints of a fixed installation.
The pass-through door arrangement is where this unit demonstrates its practical value in a working kitchen. Double sliding doors on both faces allow kitchen staff to load from the rear while front-of-house collects from the service side, supporting a clean and orderly flow during peak covers without staff crossing paths at the pass. The bain marie top accepts full-size gastronorm containers and can be operated wet or dry depending on the menu format, giving operators useful flexibility across different service styles.
Operational advantages that are worth noting in day-to-day use:
- Pass-through doors support one-directional service flow and reduce cross-traffic at the pass
- Wet or dry bain marie top adapts to different menu and service formats
- Fan-assisted heating distributes warmth evenly throughout the cabinet interior
- Mobile castors allow repositioning between preparation and service without fixed pipework
- Adjustable internal shelving accommodates plated meals and warm plate storage
Because the unit runs on electricity and sits on castors, installation is relatively straightforward. Running the bain marie in dry mode requires only a suitable electrical supply. If operating it wet, you will need a water feed nearby and easy access to the drain-down point at the end of service, so it is worth confirming pipework proximity before settling on a permanent position. Floor surface and door clearances are also worth checking in tighter layouts. The unit is intended for indoor commercial use only.
The P8B5PT is well suited to restaurants, hotels, and contract catering operations serving plated meals at volume where a clear separation between kitchen and service sides is an operational requirement. The mobile format is a genuine advantage in kitchens where space needs to flex across the day. For very high-volume sites, or where a permanent fixed installation would better suit the workflow, it is worth considering heavier-duty alternatives before committing.
If you would like to talk through how this unit fits your service volumes, layout, and existing equipment, the team is happy to work through the details with you before you decide.
£1,122.00(£1,346.40 inc VAT)
The Rieber Thermoport 1000 KB is a front-loading, actively heated insulated food carrier designed for the professional transport and holding of hot food. Where a passive insulated box simply retains whatever heat the food arrives with, the Thermoport 1000 KB uses a circulating air heating system to actively maintain or restore food temperatures during transit and holding. Digital temperature control, precise to a single degree Celsius, gives operators genuine confidence over holding conditions rather than relying on estimation. The same unit can also be used with a GN cooling pellet for chilled distribution, which makes it a practical dual-purpose carrier across a full service shift.
This kind of carrier earns its place on operations that need to move food reliably between a central production kitchen and remote service points — outdoor events, banqueting suites, satellite sites, or off-site catering where a trolley is impractical. The circulating air system helps food recover temperature more evenly than static insulation alone, which matters when the door is opened repeatedly during service. Rieber's double-walled, pore-free construction and tightly welded shell are built to handle the knocks, stacking, and daily loading demands of professional use over time.
The key practical advantages from an operational standpoint:
- Active heating maintains food temperature during transit, supporting safe holding conditions
- Digital precision control suits both hot holding and low-temperature regeneration in the same unit
- Cooling pellet compatibility allows chilled distribution without a separate carrier
- Door and heater remove cleanly; the shell is dishwasher-safe for efficient turnaround between runs
- Stackable with other Thermoport models, simplifying vehicle loading and depot storage
The heating function requires a mains power connection, so a suitable socket needs to be accessible at both the preparation kitchen and the holding destination. In transit without power, the insulation retains heat passively, but the active system will not operate. The front-loading design means workflow and racking at each location should account for that access angle. Loaded weight is worth considering if the unit needs to be carried any distance by a single operator, so vehicle positioning and trolley support are sensible to plan in advance.
The Thermoport 1000 KB is well suited to contract caterers, event caterers, healthcare catering, and education settings where food is prepared centrally and distributed to remote service points. It is also a practical choice for banqueting operations holding multiple courses at temperature during a seated service. For sites with significantly higher volume requirements or those running multiple simultaneous distribution routes, additional units or a larger-capacity model are likely to be the more practical solution.
If you would like to talk through whether this unit fits your specific service pattern before placing an order, our team is happy to help.
£647.00(£776.40 inc VAT)
The Rieber Thermoport 1000 K is a front-loading insulated food carrier designed for the transport and holding of hot or cold food in commercial catering environments. Built from food-safe polypropylene with CFC-free polyurethane foam insulation, it is a practical, durable unit for caterers who need to move food between preparation and service points whilst maintaining safe holding temperatures throughout.
In operational terms, the 1000 K is well suited to bulk food transport, handling portions for approximately 50 covers in a single carry. The insulation performs across a broad temperature range, making it as effective for chilled distribution as it is for keeping hot dishes at service temperature during transit. For sites where both hot and cold items need to travel together, an optional insulated divider allows the interior to be split into two separate temperature zones within the same unit — a useful configuration for mixed-menu services.
A number of practical details make this carrier straightforward to work with on a busy service run:
- Front-loading door with a large snap catch keeps contents secure during transport
- Door is fully removable and dishwasher-safe up to 90°C for thorough cleaning
- Foldable side handles allow compact storage when the unit is not in use
- Screwed stacking rails on the base allow multiple units to be stacked safely
- Handles, hinges, snap catch and stacking rails are all individually replaceable
That last point is worth emphasising — the replaceable component design extends the working life of the unit considerably. If a handle or hinge takes damage in day-to-day use, there is no need to replace the whole carrier, which makes long-term ownership considerably more cost-effective.
The Thermoport 1000 K is a sensible choice for contract caterers, school meal services, event catering operations, and hospital or care home catering teams where food needs to travel reliably between kitchen and service point. For higher-volume operations requiring greater single-load capacity, larger models within the Thermoport range may be worth considering.
If you are weighing up whether this capacity suits your service volumes, or thinking through the divider configuration, our team is happy to talk it through with you.
£1,355.00(£1,626.00 inc VAT)
The Parry MSB9 is a self-contained mobile servery unit combining a bain marie top with a heated storage cupboard below. It is designed to hold hot food at consistent serving temperatures at the point of service, making it a practical choice wherever food needs to be kept ready away from the main kitchen — carvery counters, buffet lines, and banqueting setups being the most common applications. The bain marie top accepts GN containers for holding multiple dishes simultaneously, while the heated cupboard beneath provides additional capacity for plates or serving equipment.
In a working service environment the unit holds up well as a self-contained station. The heated cupboard maintains temperatures across a practical holding range, and a digital display allows front-of-house or kitchen staff to monitor and adjust settings clearly. Two locking castors keep the unit stable once it is positioned, while the remaining castors allow straightforward repositioning between services or events without lifting equipment.
Several design details reduce friction during daily use:
- Removable doors and adjustable shelving simplify end-of-service cleaning
- Stainless steel construction throughout supports hygiene compliance
- Radius edges and corner bumpers reduce injury risk and protect surrounding surfaces
- Onboard plug park keeps cabling tidy during repositioning
- Flexible GN and plate capacity suits varied service formats
The MSB9 is plug-in electric and requires no fixed gas, water, or drainage connections, which is one of its principal practical advantages. It can operate in a dining room, function suite, or servery area without permanent infrastructure. Because it is built around mobility, it is not intended for static counter installation — if a fixed unit is the requirement, a different product would be more appropriate. It is also worth confirming that floor surfaces are suitable for a loaded wheeled unit before settling on a position.
The MSB9 is well suited to hotels, care homes, education catering operations, sports and leisure facilities, and event caterers who need a hot servery that can be moved between locations or stored when not in use. It handles carvery and buffet services covering a moderate number of covers comfortably. For higher-volume operations, or where multiple GN rows need to be run simultaneously across an extended service period, a larger or multi-section unit would be worth considering.
If you are weighing up whether this unit suits your service format or venue layout, we are happy to talk it through before you commit.
£2,788.00(£3,345.60 inc VAT)
The Lincat P8B6 Panther is a mobile hot cupboard with a thermostatically controlled bain marie top, operable in either wet or dry mode. Designed for food holding through service, it combines a heated cabinet interior with a flexible bain marie surface, allowing operators to hold plated meals inside while keeping pans or component dishes at temperature on top — all from a single unit that can be wheeled to wherever it is needed.
During a busy service, fan-assisted heat distribution within the cabinet helps maintain a consistent holding temperature even as the sliding doors are opened and closed repeatedly. In practice, uneven cabinet heat is a common reason food quality deteriorates late into a sitting, so the fan assistance is worth more than it might appear on a specification sheet. The bain marie top accepts a range of GN configurations, making it straightforward to hold multiple dishes or components simultaneously.
Practical features that support day-to-day service:
- Wet or dry bain marie top with thermostat for precise temperature control
- Fan-assisted cabinet ensuring even heat distribution throughout service
- Two height-adjustable internal shelves for plates or plated meals
- Double sliding doors for quick, low-disruption access at the pass
- Heavy-duty castors for repositioning between service areas or events
Being mobile, the unit requires a suitable power supply at each location it occupies, so cable routing and socket positions are worth resolving before settling on a final placement. If the bain marie top is to be used in wet mode, a water supply connection and a clear route for drain-down will also need to be factored in.
The P8B6 Panther is well suited to restaurants, hotels, and banqueting operations where holding plated meals and hot pans at the pass is a regular requirement — particularly on sites where the servery layout shifts between services or events. For operations with significantly higher throughput, or where a permanent built-in installation is preferred, a larger fixed unit is likely the more appropriate choice.
If you would like to talk through whether this unit fits your service volumes, site layout, or power setup, the team is happy to help before you commit.
£1,439.00(£1,726.80 inc VAT)
The Lincat FWDG is a free-standing electric food warming unit with three independent drawers, designed to hold plated dishes, cooked food, and serving vessels at a consistent serving temperature throughout service. Supplied with full-size GN pans and a removable water tray, it is built around the practical demands of a working pass rather than as an occasional supplement to the kitchen.
In a commercial kitchen, the ability to hold food at stable temperature without compromising quality is a genuine operational requirement. The FWDG maintains a consistent holding temperature across all three drawers simultaneously, while the integrated humidity facility — fed by the water tray — helps prevent food from drying out during extended holding periods. This is most valuable during high-demand service windows where dishes are plated ahead of the pass and need to reach the customer in good condition.
From a day-to-day operational standpoint, the unit offers several practical advantages:
- Consistent holding temperature maintained across all three drawers throughout service
- Humidity control preserves food texture and appearance during longer holds
- Full insulation keeps exterior surfaces cool, reducing burn risk in busy pass areas
- Removable drawers make end-of-service cleaning straightforward
- Stainless steel runners support reliable, quiet drawer operation over time
As a free-standing unit, the FWDG requires only a standard electrical connection and a stable, weight-rated surface. There is no requirement for plumbing, gas, or extraction, which gives reasonable flexibility when positioning it within the kitchen or at the pass. It is worth being clear about its role: this is a holding tool, not a regeneration unit. Food must reach the correct serving temperature before loading — the FWDG maintains that temperature, it does not achieve it from cold.
The unit is well suited to restaurants, hotels, pub kitchens, and contract catering operations where a dependable holding solution is needed at or near the pass. For very high-volume operations serving across multiple sections simultaneously, it is worth considering whether a greater drawer capacity would better support the workflow.
If you would like to discuss whether this unit is the right fit for your service volumes and kitchen layout, the team is happy to talk it through.
£4,365.00(£5,238.00 inc VAT)
The Victor Banquetline 50 is a mobile heated banquet cabinet designed to hold and transport plated meals or gastronorm pans at consistent serving temperature. British-made and well established in Victor's range, it is built for the repeated, demanding use that banqueting, conferencing, and high-volume food service operations routinely place on holding equipment. The cabinet accommodates up to 55 plated meals on 10-inch plates or up to 20 full 1/1GN pans, making it a practical choice for medium to large service runs.
In operational terms, the Banquetline 50 earns its place wherever food needs to be held after production and moved to a service point — a banqueting suite, function room, or ward — without losing temperature consistency. The microprocessor control panel provides a digital temperature readout and allows adjustment across a wide holding range. An integral water reservoir in the base introduces humidity into the cabinet, which helps maintain food quality and prevents dishes drying out during extended holding periods. This makes a meaningful difference during long service windows or when meals are plated well ahead of service.
From a practical standpoint, the unit offers several features that support efficient service operations:
- Runs from a standard 13amp supply — no dedicated electrical circuit required
- Supplied ready to use with a moulded plug and 2-metre curly cord with plug park
- Mounted on heavy-duty 150mm castors, with braked wheels for stability at the point of service
- Robust all-round bumper and strong door latches built for corridor and lift transit
- Four shelves and supports included as standard, with two push/pull bars for manoeuvring
There is no fixed installation required — the cabinet can be positioned wherever a standard 13amp socket is available. Before purchase, it is worth checking the castor height and overall footprint against any lift apertures or service hatches, particularly in older or listed buildings. The unit is intended for indoor use on level surfaces only.
The Banquetline 50 is well suited to hotel banqueting operations, conference venues, contract caterers, and healthcare or education sites where plated meal distribution is a regular part of service. It sits in the mid-range of Victor's Banquetline series — operations running smaller covers may find a lower-capacity model more appropriate, while sites serving significantly larger volumes may benefit from a heavier-duty cabinet.
If you would like to talk through whether the Banquetline 50 fits your service model and volumes, our team is happy to work through the detail with you before you commit.
£1,097.00(£1,316.40 inc VAT)
The Parry 1887 is a mobile hot servery combining a thermostatically controlled heated base cupboard with an independently controlled bain marie top. It is designed to hold plated meals and wet dishes at service-ready temperatures when the point of service is away from the main kitchen — a routine requirement in care homes, hotel banqueting, staff restaurants and institutional catering environments.
The independent temperature controls for the two sections are the most operationally significant aspect of this unit. The heated cabinet and bain marie can each be set to suit the food held within them, which matters when you are running plated meals alongside sauces, soups or accompaniments with different holding requirements. A single fixed temperature across both sections would either overcook wet dishes or under-hold plated food; separate controls remove that compromise and reduce the risk of food quality deterioration during extended service periods.
From a day-to-day operational standpoint, the practical advantages include:
- Independent temperature control across cabinet and bain marie for mixed food holding
- Castor-mounted base with two locking wheels for stable positioning at the service point
- Push bar for straightforward manoeuvring through corridors and dining areas
- Two removable chrome wire shelves inside the cabinet for flexible meal arrangement
- Integrated plug park keeps the cable clear of the floor during transit
The unit runs from a standard 240V single-phase supply with no fixed electrical connection, water, or gas required, which makes it genuinely portable between service locations. The main practical consideration is ensuring a clear, level route between the kitchen and the service point — this is a substantial piece of equipment and is not suited to uneven surfaces or outdoor use.
This servery is well suited to operations holding up to around 30 plated meals per service. Care home dining rooms, smaller banqueting functions and compact staff restaurants are all typical applications. For sites with higher throughput, back-to-back multi-session holding, or larger bain marie capacity requirements, a heavier-duty model would be worth considering.
If you are working out whether this unit fits your service volumes or the layout between your kitchen and dining area, we are happy to talk it through before you place an order.
£2,564.00(£3,076.80 inc VAT)
The Blue Seal Turbofan H10D is a 10-tray electric holding cabinet designed to maintain large volumes of plated or gastronorm food at a consistent service temperature without further cooking. It accepts ten full 1/1 GN trays with generous tray spacing, making it a practical choice for kitchens that need serious holding capacity within a relatively compact footprint.
In a busy service environment, holding food reliably is as critical as cooking it well. The H10D uses a low-velocity fan to circulate warm air gently and evenly throughout the cabinet. This approach avoids the surface drying that can affect food held in static units, and it supports kitchens running back-to-back services or bridging the gap between production and service — keeping quality consistent without constant replenishment from the kitchen.
From an operational standpoint, the cabinet offers several practical advantages:
- Digital temperature and timer controls allow precise management of holding conditions across different food types
- Three independent hold timers support multi-product service operations
- Continuous door seal and double-skin construction retain heat efficiently, supporting lower running costs over long service periods
- Dual interior halogen lamps allow food inspection without opening the door
- Designed to stack directly with the Blue Seal Turbofan E33D convection oven for integrated cook-and-hold workflows
The H10D is a self-contained electric unit, so installation is generally straightforward — it requires a suitable power connection and adequate ventilation clearance around the cabinet. Where a stacked oven-and-holding configuration is planned, operators should confirm surface load-bearing capacity and access requirements before installation, as combined unit weight is a practical consideration.
This cabinet is well suited to restaurants, hotels, contract caterers, and event catering operations that need reliable high-capacity holding within a modest footprint. It works as a standalone unit or as part of the Turbofan cook-and-hold system. For very high-volume sites holding across multiple service zones simultaneously, it is worth exploring whether a larger-capacity solution would be a better fit.
If you would like to talk through whether the H10D suits your service volumes and kitchen layout, our team is glad to help.
£223.00(£267.60 inc VAT)
The Hallco MRC5L is a dedicated commercial rice cooker with a 5-litre capacity, designed to handle consistent, high-volume rice preparation across multiple service periods. It cooks automatically and holds the finished rice at a safe serving temperature until it is needed, reducing the need for constant operator attention during a busy service.
In practice, a unit of this size is well suited to kitchens that serve rice as a regular or high-frequency menu item — think a busy takeaway, a canteen lunch service, or a mid-sized restaurant kitchen where rice is on the pass continuously. The keep-warm function holds cooked rice at temperature for an extended period, which gives operators flexibility when service timing is unpredictable. The non-stick inner bowl reduces rice sticking, which directly affects how quickly the unit can be turned around between batches.
The practical advantages for day-to-day kitchen operation include:
- Automatic cooking cycle removes the need to monitor the pot during service
- Keep-warm mode supports flexible service timing without quality loss
- Non-stick inner bowl speeds up cleaning between batches
- Integrated water collector reduces spillage on the work surface
- Compact footprint suits space-constrained kitchen layouts
Installation is straightforward — the unit runs on a standard single-phase supply and requires only a nearby power outlet and a stable countertop position. There are no water or gas connections required, and no ventilation ductwork. It is a genuinely simple piece of equipment to put into service.
This model is a practical choice for takeaways, hotel kitchens, school canteens, and smaller restaurant operations where rice is prepared in regular batches rather than continuously in very large volumes. For higher-volume sites producing rice at scale across multiple sittings, a larger-capacity or multiple-unit setup may be worth considering.
If you are unsure whether this capacity fits your service volume, or you want to talk through how it would sit alongside your existing kitchen equipment, we are happy to help you work it out before you order.
£1,799.00(£2,158.80 inc VAT)
The Lincat P6B3 Panther is a slimline, mobile hot cupboard with a bain marie top, designed for plated meal holding and plate warming at the pass or in banqueting service areas. It runs on four heavy-duty castors, allowing it to be repositioned between service points without the constraints of a fixed installation — a practical advantage in venues where the same equipment moves between function spaces or covers changes from service to service.
Inside the cabinet, fan-assisted heat circulation promotes even temperature distribution across both shelf levels. In practice, this matters when doors are being opened repeatedly throughout a busy service — passive heat tends to stratify or recover slowly, while the fan helps maintain more consistent conditions throughout. The bain marie top operates wet or dry under thermostatic control, making it adaptable to different holding tasks across the menu. A drain-down facility on the top simplifies clean-down at the end of service, which is a small but worthwhile operational consideration over units where draining is awkward.
For day-to-day operation, the key practical advantages include:
- Mobile on castors — repositionable without disconnecting from supply
- Slimline footprint suits restricted pass areas where depth is limited
- Wet or dry bain marie operation adapts to different holding requirements
- Fan-assisted circulation reduces uneven temperatures during repeated door opening
- Drain-down facility simplifies bain marie clean-down after service
The P6B3 is mains electric and requires no fixed gas or plumbing connection. If you intend to run the bain marie wet, a nearby water source for filling is useful, and you will need a suitable drainage point or vessel for clean-down. It is worth thinking through your pass layout carefully — specifically where the castors will sit during service and how they will be locked to prevent unwanted movement on a busy floor.
This unit is well suited to restaurants, hotels, and function venues where plated meal holding is a regular part of service and the ability to reposition the equipment adds genuine operational value. For sites holding very high covers simultaneously or running extended service periods, it is worth considering whether a wider or higher-capacity unit would better match the demand.
If you would like to talk through whether the P6B3 suits your pass layout, service style, or volume requirements, the team are happy to have that conversation before you commit.
£459.00(£550.80 inc VAT)
The Lincat BM6W is an electric countertop bain marie that uses wet heat to hold prepared food at consistent serving temperatures throughout service. Unlike dry heat alternatives, the wet heat method surrounds the food wells with heated water, which helps prevent surface drying and maintains the texture and appearance of sauce-based dishes, soups, gravies, and cooked vegetables over the course of a service period — a meaningful difference in practice.
In a working kitchen the BM6W sits comfortably in front-of-house carvery positions, back-of-house banqueting prep areas, or any servery counter where a compact, reliable holding station is needed. Recovery after pan changes or top-ups is handled well, which matters when service is continuous and pans need replenishing without disrupting holding temperatures across the rest of the unit.
From an operational standpoint, the key advantages are:
- Consistent heat distribution across all holding wells throughout service
- Adjustable heat control to suit different food types and holding durations
- Gentle moisture retention that preserves food quality and presentation
- Straightforward cleaning — wet well construction limits heavy residue build-up
- Compact countertop footprint suited to servery counters and back-bar positions
The unit is supplied as a base only. Gastronorm pans are available separately in a range of configurations, giving you flexibility to match the pan layout to your menu rather than being fixed to a single setup.
Installation is uncomplicated. The BM6W requires a suitable countertop position with access to a standard electrical supply and is not a high-draw unit, making integration into most servery areas straightforward. Confirm your available counter space and circuit capacity before ordering.
This unit is well suited to smaller restaurants, pub kitchens, hotel serveries, and catering operations running a modest menu from a single holding station. Sites running a high-volume carvery, multiple simultaneous sauce lines, or an extended banqueting operation would likely benefit from a wider or higher-capacity unit.
If you are working out which pan configuration suits your service or want to confirm this is the right scale of unit for your operation, we are happy to talk it through.
£593.00(£711.60 inc VAT)
The Parry NPWB6 is a countertop electric bain marie that uses a wet well heating method to hold food at safe serving temperatures throughout a full service period. Rather than applying direct radiant heat as a dry well unit does, the wet well design surrounds the pots with heated water, producing a gentler and more consistent holding environment. The unit comes supplied with six round pots as standard, making it a practical choice wherever multiple dishes need to be held and presented simultaneously.
In practical kitchen use, the wet well approach is generally the more suitable option for vegetables, gravies, sauces, and other preparations that are sensitive to surface drying. Holding food in moist heat maintains appearance and texture across an extended service, which becomes important when individual dishes may sit between orders for some time. It is worth noting that the water reservoir will require periodic topping up during service — this is a routine consideration with any wet well unit and should be built into the service workflow from the outset.
From an operational standpoint, the key practical advantages are:
- Moist heat environment reduces surface drying on sauces, gravies, and vegetables
- Thermostatic control allows holding temperatures to be set appropriately for each dish
- Six round pots support varied multi-dish carvery or set-menu presentations
- Countertop footprint suits front-of-house or pass-side placement
- Parry equipment has a well-established track record in UK commercial kitchens
The unit requires a suitable electrical supply and should be positioned on a level, stable counter surface with reasonable clearance on all sides for safe operation and cleaning access. The wet well reservoir should be monitored and topped up regularly during service to maintain consistent holding performance. Any optional accessories such as a false flue or stand are not included as standard and should be specified separately if required.
This model is well suited to pub carveries, care home kitchens, school catering operations, and restaurants running a set-menu or buffet format with a moderate number of holding positions. For operations requiring a greater number of wells in a single run, or those with particularly high throughput demands, a higher-capacity unit would be worth considering alongside this one.
If you are working out whether wet well or dry well is the right choice for your menu, or simply want to confirm how many pots your service actually needs, we are happy to talk it through.
£211.00(£253.20 inc VAT)
The Cambro UPCS140480 is a top-loading, passively insulated food carrier from the S-Series Camcarrier range. It is built to hold a single full-size 1/1 GN pan and maintain food at safe serving temperatures during transport, with no power source required. The polypropylene shell with polyurethane foam insulation core is a well-proven combination — keeping the unit light enough to handle comfortably when fully loaded, while providing reliable thermal retention across typical transport journeys.
This type of carrier is well established in outside catering, events work, school meal delivery, care home services, and satellite kitchen operations. The door seal and nylon latches help contain heat between the kitchen and the point of service, which matters both for food quality and for meeting food safety temperature requirements in transit.
- Top-loading design keeps the GN pan secure and stable during transport
- Four moulded handles allow a confident grip when the carrier is fully loaded
- Stackable construction aids storage efficiency and vehicle loading
- Polypropylene shell handles daily knocks and is straightforward to wipe down
- Passive insulation only — not a substitute for active holding equipment in extended service situations
As a single-pan carrier, this unit is best suited to operators moving smaller quantities — a single course, a supplementary run alongside a larger fleet, or lower-volume meal delivery rounds. For operations regularly transporting multiple GN pans, or where longer retention windows are required, a higher-capacity carrier from the same range is likely to be the more practical choice.
If you are planning a carrier fleet or weighing up sizes for a specific service model, the team is happy to talk through what would work best for your operation.
£3,712.00(£4,454.40 inc VAT)
The Hatco HDW-3 is a free-standing drawer warmer with three enclosed holding drawers, each independently temperature-controlled. Its purpose is practical and specific: to hold prepared foods at consistent serving temperatures during the gap between production and service, reducing the moisture loss and temperature drift that open holding methods tend to introduce.
In a busy service environment, that window between the pass and the plate is where food quality is most vulnerable. Enclosed drawer holding maintains a more stable environment around the food than open heat lamps or bain-marie trays. With three separately controlled drawers, kitchen teams can hold proteins, sides, and bread simultaneously at their respective appropriate temperatures rather than compromising on a single shared setting. The stainless steel construction is built to handle the wear of continuous daily use, and vented sides support consistent heat distribution during extended holding periods.
From an operational standpoint, the HDW-3 offers several practical advantages:
- Three independently controlled drawers allow simultaneous holding of different food types
- Enclosed drawer design reduces surface moisture loss versus open holding methods
- Individual thermostatic control supports consistent plate quality across menu components
- Free-standing format allows flexible positioning on a pass or servery without fixed installation
- Plug-fitted power cord means no hardwiring is required in most settings
Because it arrives plug-fitted, installation is generally straightforward. It is worth confirming that your pass layout can comfortably accommodate a three-drawer footprint before ordering — it is notably larger than a one- or two-drawer equivalent, and that difference matters on a tight pass.
The HDW-3 is well suited to mid-volume operations such as pub kitchens, hotel restaurants, and casual dining sites where holding a small number of food categories consistently through service is a daily requirement. Smaller operations or those with limited pass space may find a one- or two-drawer configuration more practical, while very high-throughput kitchens holding a wider range of menu components may benefit from a higher-capacity unit.
If you would like to talk through whether the HDW-3 is the right fit for your pass setup and service pattern, the team is happy to work through that with you before you commit.
£341.00(£409.20 inc VAT)
The Lincat BM4 is a countertop electric bain marie that uses dry radiant heat to hold pre-cooked foods at consistent serving temperatures throughout a service period. Rather than using heated water as the holding medium, it applies gentle heat beneath the pans — functioning in a similar way to a very low-temperature oven. The unit is supplied as a base only, with gastronorm pan configurations available separately to suit different service setups.
Dry heat holding suits certain food types particularly well. Thick stews, dense sauces, gravies, breads, and pastries all benefit from gentle, consistent warmth without the moisture exposure that comes with a wet well unit. The adjustable heat control allows operators to find the right holding temperature for the food being served, and because there is no water reservoir, the unit is straightforward to manage during a busy service. There is no risk of spillage when repositioning it, and no mineral scale accumulation to contend with when cleaning.
- Dry heat format removes the need for water management during service
- Adjustable heat control suits a range of food types and holding temperatures
- Compatible with separate GN pan packs across different configurations
- Countertop footprint works in both front-of-house and back-of-house positions
- No water or drainage connection required — mains power only
Installation is uncomplicated. The BM4 requires only a standard mains power connection and a stable, heat-resistant surface — no plumbing is involved. One operational point worth noting: dry heat bain maries are designed for holding food that has already reached the correct serving temperature, not for reheating from cold. Getting this right matters both for food quality and for food safety compliance.
The BM4 is well suited to cafés, carveries, school canteens, pub kitchens, and similar operations with moderate, defined service periods. It works best where a manageable number of food lines need to be held at temperature rather than across extended or very high-volume services. For kitchens running longer service windows or holding a greater number of lines simultaneously, a higher-capacity unit may be a better fit. Equally, if wet well holding would better suit your menu, that option is worth exploring before committing.
If you are unsure whether dry or wet heat is the right approach for your service, or want to talk through which pan configuration would work best for your setup, the team is happy to help you think it through before you order.
£1,410.00(£1,692.00 inc VAT)
The Parry HOT12BM is a 1200mm wide mobile hot cupboard with an integrated bain marie top. The cabinet is designed to hold plated meals at service temperature, while the bain marie section above takes gastronorm pans for heated food holding. The two functions are combined in a single unit, which suits operations that would otherwise need separate equipment to cover both requirements. Castors are fitted as standard, allowing the unit to be repositioned between prep, pass, and service areas without tools or dismantling. Gastronorm pans are not included.
During service, the thermostat-regulated cabinet maintains consistent heat across the full interior, which matters when doors are opened repeatedly throughout a busy sitting. Three perforated internal shelves support air circulation and are supplied in sections for easy removal. The double-skinned doors are also removable, which makes end-of-service cleaning more straightforward than it would be on a fixed unit.
The main operational advantages are:
- Mobile on four castors, two locking, so the unit stays in position during service
- Bain marie top accepts full-size and fractional gastronorm pans alongside plate holding below
- Removable shelves and doors reduce cleaning time at end of service
- Thermostat-controlled interior supports consistent holding without manual adjustment
- Slimline 1200mm footprint suits tighter pass and servery layouts
The unit runs on a standard single-phase electrical supply and requires a suitable socket at the intended service position. There is no fixed installation given the mobile design, though the locking castors should be engaged once the unit is placed. Reasonable clearance at the rear and sides is advisable to avoid heat build-up in confined spaces. The bain marie top requires filling with water before use, so proximity to a water source is worth considering when planning where the unit will be used.
The HOT12BM is well suited to restaurants, hotels, banqueting operations, and contract catering environments where a mobile hot holding solution with built-in bain marie capability is needed. It is particularly practical for buffet, carvery, and plated meal service where food assembly takes place away from the main kitchen. For higher-volume sites or operations requiring greater holding capacity, a wider or heavier-duty unit is likely to be the more appropriate choice.
If you are working out whether this unit fits your service style and workflow, the team is glad to talk it through with you before you commit.
£490.00(£588.00 inc VAT)
The Rieber Thermoport 600 K is a front-loading passive insulated food carrier designed for professional catering operations that need to move food safely between a kitchen and a service point — holding it either hot or cold throughout. Built from physiologically safe polypropylene with CFC-free polyurethane foam insulation, it accepts standard GN containers and is intended for daily, repeated use in commercial environments.
In practice, this carrier works well for operations serving roughly up to 25 covers from a single unit. It is well suited to holding meat dishes, gravies, and accompaniments during a banqueting run or transport leg, where maintaining temperature without access to power is the primary requirement. The front-opening door keeps access practical in confined spaces, and an optional insulated divider allows hot and cold items to be carried simultaneously in separate zones without either compromising the other.
Key practical advantages include:
- Dishwasher-safe construction simplifies end-of-service cleaning
- Removable door allows thorough internal cleaning without obstruction
- Replaceable handle, hinges, snap catch, and stacking rails support long service life
- Stackable base rails allow safe vertical stacking during storage or transport
- Optional insulated divider enables split hot/cold loading in a single unit
There are no electrical or gas connections required — this is a purely passive unit. It will not recover temperature if food is loaded below the correct service temperature, so pre-loading discipline is essential. For operations needing extended multi-hour holding or consistently high cover volumes, a larger or actively heated unit may be a more appropriate solution.
This carrier is commonly used in outside catering, banqueting, hospital and care facility food delivery, and meal distribution operations. It is less well suited to situations where food cannot reliably be loaded at the correct holding temperature before departure.
If you are weighing up capacity or configuration options for your specific service pattern, the team is happy to talk it through with you.
£3,132.00(£3,758.40 inc VAT)
The Victor HD75RU is a three-drawer under-counter hot holding unit designed to provide a dedicated staging point between production and service. Each drawer holds two full-size 150mm-deep gastronorm containers, giving the kitchen a reliable buffer for pre-prepared dishes without consuming oven space or adding to pass clutter.
Rather than relying on static bottom heat, the unit uses fan-blown air circulation to distribute warmth consistently across all three drawers. An integral water tray introduces humidity into the holding environment, which makes a meaningful difference over extended service periods — proteins, portioned dishes, and vegetables hold their texture and moisture rather than drying out at the edges. That combination of even air movement and humidity management is what separates this type of unit from a basic warming drawer or heated shelf.
From a day-to-day operational standpoint, the HD75RU offers several clear advantages:
- Under-counter profile keeps the pass and prep surfaces clear of additional countertop equipment
- Fan-circulated heat reduces the temperature variation that causes quality inconsistency across drawers
- Humidity tray helps maintain food texture over longer holding windows
- Thermostatic control allows the temperature to be adjusted for different food types
- Stainless steel interior and exterior support straightforward end-of-service cleaning
The unit runs from a standard 13-amp supply with a fitted plug and cable, so no dedicated electrical provision or trade installation is required. It is built to sit beneath a standard-height work surface — worth measuring against your existing bench before ordering. The humidity tray is filled manually; there is no mains water connection. The rear panel is galvanised rather than stainless steel, which is worth bearing in mind if the unit will be positioned in a high-moisture area or tight against a wall.
The HD75RU is well suited to restaurants, hotels, staff canteens, and similar operations that batch food in advance and run structured service periods. It works particularly well where pass space is limited and an under-counter holding position is preferable to a countertop unit. Sites running very high covers or requiring significantly greater simultaneous capacity may find a larger or multi-unit configuration more appropriate.
If you would like to talk through whether this unit fits your service volume and kitchen layout, the team is happy to help before you commit.
£382.00(£458.40 inc VAT)
The Parry NPWB2 is a countertop electric bain marie that holds food at safe serving temperatures by heating water in the well beneath the pots. That water surrounds the round pots and transfers heat gently and evenly, maintaining a stable, humid environment throughout service without the operator needing to intervene constantly. Thermostatic control allows a target temperature to be set and held reliably from the start of service to the end.
Wet well holding is particularly well suited to soups, gravies, sauces, and vegetables — dishes that benefit from moist ambient heat and would dry out or skin over in a dry well unit. On a carvery or buffet counter where food may sit for an hour or more, that consistent environment makes a noticeable difference to food quality and presentation. Wet well units do use slightly more energy than dry well equivalents, but they also reach working temperature more quickly, which is a practical advantage when turnaround between services is tight.
- Thermostatic control holds a stable temperature throughout service without constant adjustment
- Round pot format suits soup, sauce, and vegetable service on buffet and carvery counters
- Wet heat prevents surface drying on exposed food during extended holding periods
- Compact countertop footprint works well where servery space is limited
- Can be raised on optional stands to better suit counter height or workflow
The NPWB2 is a plug-in electric unit — no gas supply or plumbed water connection is required, which keeps installation simple. Operators should ensure adequate ventilation around the unit during service and confirm the counter surface can comfortably support the filled weight. An optional false flue is available for installations where a more finished appearance is needed.
This unit is a practical fit for smaller operations — cafés, pub kitchens, care homes, and compact carvery or buffet setups — where two pot positions are sufficient to cover the service requirement. Sites running wider buffet lines, or those needing gastronorm-compatible containers across several positions, may find a higher-capacity model with GN compatibility better suited to the volume and variety they serve.
If you are weighing up wet well versus dry well holding, or want to work through whether two positions will cover your typical service, the team is happy to talk it through with you.
£662.00(£794.40 inc VAT)
The Parry 9214 is a freestanding, double door electric hot cupboard designed for commercial plate warming and dry heat holding. It maintains crockery at a consistent, thermostatically controlled temperature throughout service, removing the need to borrow oven space for warming or manage the consequences of cold plates reaching the pass.
In a busy service environment, plate temperature is a practical concern that affects food quality and the pace of the pass. Cold crockery draws heat from plated food within seconds, which adds pressure on front-of-house staff and can affect the customer experience across a long sitting. A dedicated hot cupboard holds a useful volume of plates at the correct temperature from the first cover to the last, giving kitchen teams one less variable to manage during peak periods. The Parry 9214 is built for the repetitive daily demands of commercial use and sits comfortably on the pass or in a back-of-house service area.
Practical advantages for kitchen operators include:
- Thermostatic control allows operators to set the correct holding temperature for their crockery and service style
- Double door configuration suits pass layouts where access from either side is useful during service
- Adjustable chrome wire shelves accommodate different plate sizes without wasted internal space
- Freestanding construction keeps positioning flexible and installation uncomplicated
- Electric operation removes the need for a gas connection, widening where the unit can be placed on site
Installation is straightforward for most sites. The unit is freestanding and requires only a suitable electrical supply. Before positioning on the pass or in a service area, it is worth confirming that the available supply is adequate and that there is sufficient clearance around the cabinet for ventilation and safe access during service.
The Parry 9214 is well suited to restaurants, pub kitchens, hotel operations, and catering environments running moderate cover volumes. It is a practical choice for sites that need a reliable, dedicated plate warming solution without a complex or costly installation. For higher-volume operations running multiple consecutive sittings, or kitchens with heavier throughput demands, a larger capacity unit may offer better performance across a full service.
If you would like to talk through whether this unit suits your service volume or pass layout, the team is happy to have that conversation before you commit.
£386.00(£463.20 inc VAT)
The Lincat LBM2W is a countertop electric bain marie that uses wet heat to hold pre-cooked food at safe serving temperatures throughout service. Rather than applying direct heat to the containers, wet heat works by warming the water in the well, which in turn provides gentle, consistent warmth around the pans. This approach is particularly well suited to sauces, gravies, soups and vegetables, where the moist environment helps prevent the surface drying, skinning and crusting that can occur with dry heat alternatives during extended holds. The unit is supplied with four quarter-gastronorm pans and lids, making it ready for most countertop service configurations without additional purchases.
In a busy service environment, the quality of held food directly affects what reaches the customer. The wet heat method is well regarded for maintaining texture and appearance over the course of a service, particularly where dishes need to be held for extended periods and there is limited opportunity to refresh food between covers. The adjustable temperature control allows operators to dial in the appropriate holding level for different food types rather than running everything at a fixed output.
From a practical, day-to-day perspective, the LBM2W offers a number of operational advantages:
- Supplied with GN pans and lids — ready for service straight from the box
- Adjustable temperature control suits different food types and holding requirements
- Wet heat reduces surface drying and quality loss during extended service periods
- Compact countertop footprint suits serveries, carvery counters and back-bar setups
- Straightforward to drain, clean and reassemble between services
Installation is straightforward, requiring a standard mains connection. The well needs to be filled with water before use, and a warm-up period should be factored into service preparation. It is worth noting that wet heat operation does consume somewhat more energy than dry heat equivalents due to the water heating process — a consideration if running costs are a priority. The unit is designed for countertop use only and is not suitable for drop-in or floor-standing installation.
This model is well suited to smaller operations — cafés, pub kitchens, hotel breakfast services and compact carvery counters — where a practical, ready-to-use holding solution is needed without the scale of a multi-well unit. Sites with higher throughput or a greater number of dishes to hold simultaneously may find that a larger or multi-well configuration serves them better.
If you are weighing up wet heat versus dry heat holding for your menu, or want to talk through whether this unit suits your service volume, the team is happy to help you work it out.
£591.00(£709.20 inc VAT)
The Lincat PLH45 Panther is a floor-standing static hot cupboard built to handle two of the most routine holding tasks in a commercial kitchen: warming plates ahead of service and holding plated meals at safe serving temperatures until they reach the pass. It is a plain-top insulated cabinet with a side-hinged door, three adjustable shelves as standard, and levelling feet to sit steadily on uneven kitchen floors.
Plate temperature is one of those details that quietly affects the quality of every dish that leaves the kitchen. The PLH45 uses thermostatic control to hold a steady, adjustable internal temperature, allowing operators to dial in the right setting for plate warming or gentle meal holding without the risk of over-drying food or cycling the element unnecessarily. The fully insulated construction helps the cabinet retain heat across a full service, which also keeps running costs reasonable over time.
A few practical points are worth considering before installation:
- Static floor-standing unit — no castors fitted as standard, so kitchen layout should be planned accordingly
- Side-hinged door suits positions where access from the front only is available
- Full insulation limits surface heat transfer, which is useful in tighter pass areas
- Three shelves included, adjustable to suit varying plate sizes and holding volumes
The PLH45 is well suited to restaurants, pub kitchens, and hotel operations running a steady daily cover count where reliable plate warming is a routine requirement. It is a static unit, so operators needing mobility around the kitchen, or those running significantly higher volumes, may find a mobile or larger-capacity alternative a better fit for their workflow.
If you would like to talk through how this unit would work within your kitchen layout and service pattern, we are happy to help you decide.
£1,159.00(£1,390.80 inc VAT)
The Parry HOT12P is a 1200mm wide electric hot cupboard designed for plate warming and plated meal holding at the service pass. The defining feature is its pass-through door arrangement — kitchen staff load from the back while front-of-house collects from the front, creating a clean separation between the two areas without the need for staff to cross over during service.
In practice, this type of unit proves its worth during sustained service periods. An internal thermostat maintains consistent holding temperatures across the cabinet interior, helping to keep plates and held meals at a stable temperature from the opening cover to the last. The flat top surface also provides a useful staging area at the pass when working space is tight.
Several design details are worth noting from an operational standpoint:
- Pass-through doors on both sides support a disciplined kitchen-to-service workflow
- Two perforated internal shelves, each in three removable sections for easy cleaning
- Double-skinned doors are removable, simplifying end-of-service clean-down
- Four castors fitted as standard, two lockable, allowing safe repositioning as layouts change
- Flat top offers a practical staging surface during busy service periods
Being mobile on castors makes the HOT12P a practical choice for operations where the pass configuration changes between services or event formats. It is well suited to restaurants, hotels, and function caterers running regular table service. For larger sites handling significantly higher volumes across multiple sittings, it is worth considering whether a higher-capacity unit would better match throughput demands.
The unit requires a suitably rated electrical supply and adequate clearance for ventilation and safe access. If you are working out whether this model fits your pass layout or service volumes, the team is glad to talk it through with you.
£736.00(£883.20 inc VAT)
The Parry BMF6C/G is a gas-fired wet well bain marie designed to hold prepared food safely at serving temperature throughout a service period. It operates on natural gas or LPG — conversion jets are supplied — and uses piezo ignition, so it functions independently of any electrical supply at the point of use.
Wet well operation works by surrounding the food containers with heated water rather than exposing them to direct or dry heat. This maintains humidity around the food, which is particularly valuable for moisture-sensitive dishes. Vegetables, gravies, sauces, soups, and braised preparations all benefit from this method, holding their texture and appearance considerably better than they would under dry heat over an extended service. The wet environment also helps the unit recover temperature more quickly after lids are lifted or pans are changed mid-service — a practical advantage in any busy servery where containers are being accessed repeatedly.
In day-to-day kitchen operation, the BMF6C/G offers several straightforward advantages:
- Gas operation removes any dependency on an electrical socket at the servery position
- Piezo ignition allows quick, reliable lighting with no electrical connection required
- Wet heat reduces food waste by preventing dishes from drying during longer service windows
- Compatible with standard GN pan configurations for flexible food presentation
- No flue connection required, offering more flexibility in counter or servery placement
Although no flue is needed, adequate general ventilation in the kitchen is still a requirement and worth confirming at the planning stage. The unit is well suited to counter-top or servery installation and is commonly used in carveries, pub kitchens, care homes, schools, and similar operations where gas is the available or preferred energy source. For sites holding a greater number of dishes simultaneously, or where service volumes are consistently high, a larger-capacity unit would be worth considering.
If you are working through whether wet well or dry well is the right approach for your menu, or want to confirm this unit fits your service volumes, the team is happy to talk it through with you.
£2,154.00(£2,584.80 inc VAT)
The Lincat P8P4PT Panther is a mobile hot cupboard designed for commercial service kitchens where consistent plate temperature and flexible positioning both matter. It runs on castors, features sliding doors on both sides for pass-through access, and uses fan-assisted heat distribution to maintain an even temperature across the interior — reducing the cold spots that passive heat alone can leave, particularly at lower shelf positions during a busy service.
In practice, the pass-through arrangement works best when the unit sits at or near the pass between kitchen and front-of-house. Kitchen staff load plates from one side; service staff retrieve from the other. That separation keeps traffic at the pass cleaner and reduces the crossing of paths that slows service during peak covers. Fan-assisted circulation means plates drawn from any shelf should be in consistent condition when they reach the table.
Key operational advantages include:
- Pass-through sliding doors on both sides for efficient loading and retrieval without staff crossing
- Fan-assisted heating distributes warmth evenly across all shelf positions
- Adjustable shelving to accommodate plates and plated dishes of varying heights
- Heavy-duty castors allow repositioning between service areas or back to storage
- Robust construction suited to the routine demands of a working commercial kitchen
As a mobile unit, the P8P4PT requires a suitable mains electrical supply positioned accessibly within the service area. It needs adequate clear floor space for both sets of sliding doors to open fully during service, and it is worth checking doorway widths and floor surfaces if the unit needs to move through tight passages between areas. No gas or water connection is required.
This model suits mid-sized restaurants, hotel food and beverage operations, and event or banqueting kitchens that need reliable mobile plate-holding capacity with the workflow benefit of a pass-through layout. For very high-volume operations running extended service periods with larger brigade sizes, a higher-capacity model may be worth considering.
If you would like to talk through how this unit would fit your pass layout or service pattern before placing an order, the team is happy to help.
£2,642.00(£3,170.40 inc VAT)
The Lincat Panther P8P6PT is a mobile hot cupboard built around the practical demands of a working kitchen pass. It features sliding doors on both the front and rear faces, which means kitchen staff can load plated meals from the kitchen side while front-of-house collects from the other — without either team crossing the other's path. The unit runs on castors, so it can be repositioned between services or moved to accommodate different kitchen configurations without any fixed installation work.
Fan-assisted heating distributes warmth evenly through the interior, which is particularly useful during a busy service when plates are being loaded at different intervals and temperatures. Two height-adjustable internal shelves give operators flexibility to configure the interior around different plate sizes or stacking arrangements, making it more adaptable than a fixed-shelf unit in day-to-day service.
The practical workflow advantages of this configuration are worth setting out clearly:
- Pass-through door arrangement reduces cross-traffic at the pass during service
- Fan-assisted heat helps maintain consistent temperatures across a loaded interior
- Castors allow repositioning between services or to suit different kitchen layouts
- Adjustable shelves accommodate varying plate sizes and stack depths
- Simultaneous rear loading and front collection keeps service moving efficiently
As a mobile unit, no permanent installation is required, but an appropriate electrical supply must be available at the intended position on the pass. The castors are best suited to smooth, level flooring — uneven surfaces can affect stability when the cupboard is fully loaded. This is not a high-volume banqueting holding solution, and very large or continuous-cover operations may find a higher-capacity unit better suited to their throughput.
The P8P6PT is well suited to restaurants, hotel kitchens, and pub operations running plated service from a conventional kitchen pass. Smaller operations with single-sided access may find a standard, non-pass-through model a more practical and cost-effective fit.
If you are unsure whether this unit suits your pass layout or service pattern, the team is happy to talk it through with you before you go ahead.
£227.00(£272.40 inc VAT)
The Lincat LBM is a countertop dry heat bain marie designed to hold pre-cooked foods at safe serving temperatures throughout a service period. Rather than using a water well, it circulates warm air within an enclosed well — a simpler arrangement that removes the need to fill, monitor, or drain water during service. It comes supplied with gastronorm pans and lids, making it ready to use from the outset.
In day-to-day service, the dry heat method works reliably for foods that tolerate gentle, consistent warmth — soups, gravies, sauces, and stews held ready for plating or serving. The adjustable heat control allows operators to set an appropriate holding temperature for the food type, which matters both for food safety compliance and for preserving the quality of more delicate preparations. Where dry heat performs less well is with foods that dry out quickly during extended holding; for those situations, a wet well unit is generally the more dependable choice.
Practical advantages for day-to-day operation include:
- No water to manage — faster setup, easier breakdown, and reduced spillage risk
- Adjustable heat control to suit different foods and holding periods
- Compact footprint that sits comfortably on smaller servery counters
- Supplied with gastronorm pans and lids for immediate use
- Plugs into a standard mains socket with no specialist installation required
Because it requires no pipework or drainage, the LBM can be positioned wherever counter space is available — making it a practical choice for front-of-house serveries, carvery stations, and pass areas where flexibility matters. It is not intended for continuous all-day holding across a high-volume operation; in those environments, a wider multi-section unit or a wet well model is likely to be more appropriate.
This unit is well suited to cafés, pub kitchens, school canteens, and carvery counters with moderate throughput. For larger serveries, extended service periods, or where several food types need to be held simultaneously, it is worth considering higher-capacity alternatives before committing.
If you are weighing up dry heat against wet well, or want to check whether this unit fits your service pattern and counter layout, the team is happy to talk it through.
£1,565.00(£1,878.00 inc VAT)
The Lincat P8P3 Panther is a mobile hot cupboard designed for commercial food service operations where plated meals and crockery need to be held at a consistent temperature and moved between areas as service demands shift. Mounted on four heavy-duty castors, it can be repositioned within a kitchen, moved to a service corridor, or wheeled into a function room without any fixed installation commitment. Double sliding doors provide access from either side, which keeps the pass practical during a busy service.
Fan-assisted heat circulation sets this unit apart from simpler passive hot cupboards. The internal fan distributes warm air evenly throughout the cabinet, reducing the risk of hot spots and helping plates and plated meals hold a stable temperature across all shelf positions. Two height-adjustable internal shelves allow the interior to be configured around different plate sizes or service formats, which is useful when requirements change between services.
In practice, this type of unit performs well in structured, volume-predictable environments. Common applications include restaurants running set menus, hotel dining operations, banqueting kitchens, and events catering where plates need to be ready and held through a defined service window. The mobile format is particularly suited to operations where the hot cupboard needs to move between different areas on different occasions rather than occupy a fixed floor position permanently.
- Fan-assisted circulation distributes heat evenly across all shelf positions
- Four heavy-duty castors allow repositioning within and between service areas
- Double sliding doors give access from either side during service
- Two height-adjustable internal shelves to accommodate different plate sizes
- Robust Lincat build quality suited to regular, heavy commercial use
For operations running very high volumes or extended service periods, it is worth considering whether a larger-capacity model would better match throughput requirements. For smaller operations or those with limited floor space, a countertop or under-counter alternative may be more appropriate.
If you would like to talk through whether this model suits your service style, volume, or available space, the team is happy to work through it with you.
£3,191.00(£3,829.20 inc VAT)
The Lincat P8B6PT Panther is a mobile hot cupboard with a thermostatically controlled bain marie top, combining hot holding and pan-based food service capability in a single freestanding unit. It is designed for commercial kitchens and servery operations where flexibility during service matters as much as consistent food holding performance. The bain marie section can be operated wet or dry depending on the service style, and a built-in drain-down facility simplifies end-of-service cleaning.
Fan-assisted heat circulation within the cabinet helps maintain a steady, even temperature throughout the interior during extended holding periods, reducing the risk of cold spots developing in stored food. Pass-through double sliding doors on both sides allow access from either direction, which suits counter configurations or island layouts where kitchen and front-of-house teams need simultaneous access without getting in each other's way. Two height-adjustable internal shelves add practical flexibility for plated meals or plate storage during service.
The main operational advantages of this unit include:
- Pass-through doors allow two-sided access without interrupting service flow
- Fan-assisted circulation keeps holding temperatures consistent throughout the cabinet
- Castors allow the unit to be repositioned between kitchen, servery, and function areas
- Wet or dry bain marie top suits a range of pan-based service styles
- Drain-down facility reduces cleaning time at the close of service
As a mobile unit, no fixed installation is required beyond a mains electrical connection and adequate floor space to manoeuvre safely when the unit is loaded. The bain marie top requires filling and bringing up to temperature ahead of service, so it is worth factoring that lead time into your pre-service routine. It is also sensible to check that your flooring and any internal access routes can handle the unit's weight when fully loaded.
This unit is well suited to restaurants, hotels, and function or event catering operations that need combined hot holding and bain marie capability in a flexible, moveable format. It works particularly well where service layouts change between sittings — banqueting, multi-room functions, or operations that rotate between a main kitchen and a separate servery. For sites running very high volumes or extended service periods with heavy pan loads, it is worth considering whether a higher-capacity unit would be a better match for the demand.
If you are unsure whether this unit fits your service setup or want to talk through the options, our team is happy to help before you commit.
Showing 120/337
Browse Related Categories
Food Holding & Warming Buying Guide
Hot holding
Bain maries, hot cupboards, drawer warmers, food warmers and heated banquet cabinets from Lincat, Parry, Buffalo, Victor, Hatco, Alto-Shaam, Duke and Scanbox.
Display
Hot food merchandisers from Lincat, Buffalo, Roller Grill and Victor, plus chip scuttles and fries stations from Vizu, Lincat, Hatco, Buffalo and Parry.
Transport
Insulated and heated food carriers, delivery bags and beverage dispensers from Cambro, Vogue, Rieber and Pujadas, plus plate warmers from Parry, Lincat, Buffalo and Victor.
Call 01304 827272 for help choosing hot holding for your service.
Frequently asked questions
What is the difference between wet heat and dry heat bain maries?
Wet heat models hold food over a heated water bath. Dry heat models heat the well directly with no water. Lincat make both.
Do you sell heated food carriers?
Yes. Cambro and Rieber make electric heated food carriers, in the Heated Food Carriers section.
Can you help me choose?
Yes. Call 01304 827272 with your menu, covers and service style.
- Choosing a selection results in a full page refresh.
- Opens in a new window.