Kitchen Wall Cupboards & Shelves

This 1500mm wall-mounted shelf from Vogue is a straightforward, practical storage solution for commercial kitchens. Constructed from grade 430 stainless steel and built around a three-rod design, it provides a generous run of accessible storage along a single wall fixing point. The rod configuration makes it equally useful for hanging and resting cookware as it does for storing dry goods — the open spacing between rods allows air to circulate, which helps keep dry ingredients in better condition than they would be in an enclosed unit.

In a working kitchen environment, wall shelving like this earns its place by freeing up prep table and floor space. A 1500mm run gives enough width to organise a meaningful volume of kit — pots, pans, gastronorm containers, and similar — without creating clutter at bench level. At a rated load of 95kg, it has sufficient capacity for general kitchen storage, though operators should bear that in mind when planning heavier loads such as full containers or bulk dry goods.

• Keeps cookware off prep surfaces and within easy reach during service
• Open rod design supports airflow, helping preserve dry-stored ingredients
• Grade 430 stainless steel resists the heat, moisture and cleaning chemicals typical in commercial kitchens
• 1500mm width provides a practical storage run without requiring multiple shorter units
• Wall-mounted fixing keeps the floor clear for cleaning and movement

Installation is wall-fixed, so the load is transferred directly to the wall structure. It is important to ensure the wall substrate is suitable — solid masonry or a properly noggin-backed stud wall is preferable, particularly if the shelf will be loaded towards its rated capacity. The shelf weighs 9kg unloaded, so fitting is manageable for two people. It is worth considering the shelf's position relative to cooking equipment below, and whether wall tiling or cladding needs to be cut around the fixing points.

This shelf suits smaller to medium-sized commercial kitchens — café and restaurant prep areas, school kitchen serveries, and bakery or catering prep rooms where wall storage runs are a practical use of vertical space. Kitchens requiring greater storage depth or a higher load rating may find a deeper or heavier-duty model better suited to their needs.

If you are planning a full wall storage layout or want to check the shelf fits your fixing wall, the team is happy to talk it through before you order.

This is a straightforward, purpose-built shelf designed to provide a secure, hygienic surface for positioning a microwave in a commercial kitchen environment. Constructed from 430-grade stainless steel, it is built to hold the weight demands typical of commercial microwave units and to withstand the heat, moisture, and cleaning chemicals that are part of daily kitchen life.

In practical terms, a dedicated microwave shelf keeps the unit at a safe and ergonomic working height, freeing up valuable counter space and reducing the risk of the microwave being moved or knocked during a busy service. The stainless steel construction cleans down quickly and does not corrode, rust, or harbour bacteria in the way that painted or laminated surfaces can over time.

• Keeps the microwave at a consistent, accessible height for kitchen staff
• Frees up counter and prep space during service
• Stainless steel surface wipes clean easily and resists corrosion
• Suitable for wall-mounting in pass areas, counters, or back-of-house positions
• Rated to support the weight of most commercial microwave units

Before fitting, it is worth confirming the wall construction is suitable for the intended fixing method and that the shelf position allows adequate clearance around the microwave for ventilation. The shelf is intended for indoor commercial use and is not rated for outdoor or refrigerated environments.

This shelf suits smaller kitchens, cafés, and back-of-house areas where a reliable, no-fuss solution is needed. For operations requiring multiple microwave positions or heavier overhead storage, it is worth considering a heavier-duty shelving system instead.

If you are unsure whether this shelf suits your specific microwave unit or wall setup, the team is happy to help you check before you order.

This is a wall-mounted wire shelf from Vogue, constructed from chrome-coated steel wire and supplied complete with fixing brackets. It is a straightforward, open-format shelf intended for storing pans, trays, dry goods, and general kitchen supplies in a wall-mounted position.

The open wire construction allows air to circulate freely around stored items, which helps reduce moisture build-up and keeps the shelf area cleaner between wipes. In a busy kitchen environment this matters — enclosed shelving traps condensation and grease, whereas wire shelving is far quicker to clean down during service. At a 30kg maximum load capacity, it handles a reasonable stack of pans or a mix of lighter provisions without issue, though it is not intended for bulk dry store or heavy equipment storage.

• Open wire design improves air circulation around stored items
• Chrome coating resists corrosion in humid kitchen conditions
• Supplied with wall-fixing brackets — ready to install
• Suitable for pans, trays, utensils, and lighter provisions
• Quick to wipe down, supporting good hygiene routines

Installation is straightforward wall-fixing, with brackets included. As with any wall-mounted shelf, the fixing surface and wall construction matter — solid masonry or studwork with appropriate fixings is advisable to reliably support loaded weight over time. It is worth confirming that the wall surface and fixing method suit the intended load before installation.

This shelf is well suited to smaller commercial kitchens, prep areas, front-of-house serveries, and staff areas where a practical, hygienic storage solution is needed without the bulk of a full shelving unit. For operations requiring deeper shelving, greater load capacity, or a full bay configuration, heavier-duty freestanding or multi-tier wall shelving options would be more appropriate.

If you are planning a storage layout and want to make sure you have the right combination of shelving types and sizes, our team is happy to talk it through.

This Vogue wall-mounted cupboard is a straightforward stainless steel storage unit designed to free up floor space in commercial kitchens where room is at a premium. It mounts to the wall, keeping the working area beneath clear, and features sliding doors rather than outward-opening ones — a practical choice in tight galley layouts or anywhere staff movement is dense. An internal central shelf divides the space and allows equipment, dry goods, or small utensils to be organised on two levels.

In a working kitchen, wall storage of this type earns its place by keeping frequently needed items accessible without contributing to floor clutter. The sliding door mechanism holds up well to the kind of repeated, sometimes rough handling that comes with busy service periods, and the all-stainless construction means there are no painted surfaces or particleboard edges to deteriorate in a humid kitchen environment.

From a practical standpoint, the key advantages are:

• Sliding doors open without encroaching into the working aisle
• Stainless steel surfaces wipe clean quickly and meet food-safe hygiene standards
• Wall-mounted installation keeps the floor beneath accessible for cleaning
• Internal shelf provides two usable storage levels within the same footprint
• Robust construction holds up to daily commercial use without surface degradation

Installation requires solid wall fixings appropriate to the wall type and load — masonry fixings into a brick or block wall are straightforward, but a timber-stud or dry-lined partition will need additional support to carry a loaded cabinet safely. Ensure the fixing points are located correctly before installation, as repositioning afterwards is not simple. The unit is suited to kitchens of most sizes; for larger sites needing significantly more wall storage, units with greater width or additional shelving may be worth considering.

This cupboard is a sensible choice for cafés, small restaurant kitchens, staff canteens, and food prep areas where wall space is available and floor space is not. It works particularly well in back-of-house areas alongside preparation benches. Sites with very high-volume storage needs may find a single unit insufficient and should consider whether multiple units or a larger alternative would better serve them.

If you're unsure whether this unit is the right fit for your kitchen layout or fixing situation, we're happy to talk it through before you order.

This Vogue wall-mounted cupboard is a straightforward stainless steel storage unit designed to make use of vertical wall space in a commercial kitchen. It features sliding doors and an internal central shelf, providing two usable storage levels for dry goods, small equipment, or serviceware without occupying any floor area.

In a working kitchen, the sliding door design is a practical choice. Unlike hinged doors, slides require no clearance arc in front of the unit, which matters in tight galley kitchens, pass areas, or prep stations where movement is constant. The unit can be accessed cleanly during a busy service without obstructing adjacent staff or equipment.

Constructed in stainless steel throughout, the cupboard is straightforward to wipe down and keep to food-safe hygiene standards. The material holds up well in the warm, humid conditions typical of a commercial kitchen environment.

• Sliding doors allow access in restricted spaces without door swing clearance
• Central shelf divides internal storage into two working levels
• All-stainless construction supports easy cleaning and hygiene compliance
• Wall-mounted design keeps floor space clear for workflow
• Suitable for dry storage, small equipment, or serviceware

Installation requires secure fixing to a wall capable of bearing the loaded weight of the unit. It is worth confirming wall construction and fixing points before ordering, particularly in kitchens with plasterboard or stud partition walls where additional reinforcement may be needed.

This cupboard is well suited to smaller commercial kitchens, café back-of-house areas, and prep rooms where storage is needed at height but floor space is at a premium. For operations with higher storage demands or heavier equipment to house, a larger or heavier-duty wall unit may be more appropriate.

If you are unsure whether this unit is the right fit for your available wall space or storage requirements, our team is happy to talk it through with you.