Catering Taps & Pre Sprays

The Vogue Single Pedestal Mini Pre-Rinser is a compact, wall- or bench-mounted rinsing unit designed for use at commercial dishwash and pot wash stations. It delivers a focused spray of water to clear food debris from crockery, cookware, and utensils before they enter the dishwasher, helping to reduce wash cycle times and improve overall throughput at the sink.

In a working kitchen environment, a pre-rinser of this kind earns its place quickly. Clearing plates and pans at source rather than relying on the dishwasher alone to shift heavy soiling makes a noticeable difference during a busy service, particularly in sites running continuous covers. The Technoplast construction keeps the unit lightweight without compromising durability, and the stainless steel outer sleeve provides the surface resilience expected in a commercial environment.

Practical points worth noting for day-to-day use:

• WRAS approved — meets UK water regulations for commercial installation
• Santoprene inner pipe resists heat and maintains flexibility over time
• Restraining hook keeps the hose tidy and off the work surface between uses
• Supplied pre-assembled with a 50cm flexible hose on a half-inch inlet
• Quarter-turn (90°) action gives straightforward on/off control

Installation connects via a standard half-inch water supply. The unit is supplied ready to fit, which keeps installation straightforward for most plumbers familiar with commercial kitchen fit-outs. It is worth confirming that your sink configuration and wall or bench setup can accommodate the pedestal mount before ordering, and that adequate drainage is in place to handle the spray volume during use.

This pre-rinser is well suited to smaller to medium-volume operations — cafés, pub kitchens, staff restaurants, and similar sites — where a single rinse point serves the dishwash area efficiently. For higher-volume operations running multiple wash stations simultaneously, a heavier-duty or multi-point setup may be worth considering.

If you are unsure whether this unit is the right fit for your sink configuration or service volume, our team is happy to help you think it through before you order.

These Vogue basin pillar lever taps are a straightforward, reliable solution for hand wash basins in commercial kitchens, food preparation areas, and catering facilities. Sold as a matched pair, they feature a quarter-turn (90°) action and are WRAS approved, confirming they meet the Water Regulations Advisory Scheme requirements for use in the UK — an important consideration for any site subject to environmental health inspection.

In a busy kitchen environment, tap fittings take a great deal of daily use. The lever handle format is well suited to commercial settings where hands may be occupied or gloved, allowing the tap to be operated with minimal effort. The quarter-turn action reduces wear over time compared to traditional multi-turn fittings, which can make a practical difference to longevity in high-throughput locations.

• WRAS approved for compliance with UK water regulations
• Quarter-turn lever action suits gloved or occupied hands
• Half-inch inlet connection — compatible with standard commercial basin plumbing
• Sold as a pair, covering both hot and cold supplies
• Durable construction suited to regular daily use in catering environments

These taps are best suited to hand wash basins in kitchens, prep areas, or welfare facilities where a straightforward, compliant fitting is required. They are not designed for high-pressure or high-flow sink applications — for pot wash or heavy-duty sink positions, a more robust tap configuration would be more appropriate.

If you are fitting out multiple basins or want to confirm compatibility with your existing plumbing setup, the team is happy to assist.

These are a straightforward pair of domehead taps from Vogue, designed as direct replacement fittings for commercial wash basins. They use a G1/2 thread connection and are built with a full 360-degree turn action, which is a practical choice in kitchen and front-of-house environments where operatives are often working quickly with damp or gloved hands.

WRAS approval confirms the taps meet the Water Regulations Advisory Scheme requirements for use in commercial properties in the UK — a requirement in many local authority and environmental health inspections. This makes them a suitable choice for new installations and like-for-like replacements in premises subject to compliance checks.

From an operational standpoint, domehead taps are well suited to utility and hand-wash sinks in kitchen environments. The dome-shaped head provides a positive grip and the full-turn action gives clear control over flow, which is useful in areas where taps are used frequently throughout a service period. The construction is practical rather than decorative, which is appropriate for back-of-house use.

• WRAS approved for compliant commercial installation
• G1/2 thread suits standard commercial basin fittings
• Full 360-degree turn action for reliable flow control
• Supplied as a pair, covering both hot and cold positions

These taps are supplied as a pack of two, which reflects typical hot and cold basin installation. They are noted as a fit for the Vogue P088 Model A wash basin, so if you are fitting to a different basin model, it is worth confirming thread compatibility before ordering.

If you are unsure whether these taps are the right fit for your basin or installation, our team is happy to help you confirm before you order.

The KWC DVS Aquarius is a sensor-operated handwash tap finished in stainless steel, designed for commercial washroom and kitchen handwash installations. The 200mm spout reach suits standard wall-mounted or deck-mounted basins, and the included 15mm PEX hose simplifies connection to existing pipework. Operation is entirely touchless — users activate flow by placing their hands beneath the sensor, with no levers or handles to touch.

In busy commercial environments, touchless taps are a practical hygiene measure rather than a luxury addition. Where staff are moving between food preparation, waste handling, and handwashing throughout service, eliminating touch points on the tap itself reduces the risk of cross-contamination at the basin. The integrated flow control maintains consistent output without requiring user adjustment, which also helps to manage water consumption over a full service period.

From an operational standpoint, the Aquarius offers a few clear advantages worth noting:

• No touch points reduces cross-contamination risk at handwash stations
• Integrated flow control supports consistent output and water efficiency
• Stainless steel construction withstands the demands of a commercial environment
• PEX hose included, reducing installation complexity
• Straightforward sensor operation requires no staff instruction

Installation is relatively straightforward for a qualified plumber. The 15mm PEX hose connects to standard supply pipework, and the compact body suits most commercial basin configurations. It is worth confirming basin deck thickness and the available clearance beneath the basin before ordering, as these can affect fitting. This tap requires a power supply for the sensor — electrical connection requirements should be confirmed with your installer prior to purchase.

The Aquarius 200mm is well suited to staff handwash basins in commercial kitchens, food preparation areas, and hospitality washrooms where hygiene standards and throughput both matter. For larger installations or multi-basin setups, it is worth discussing options with us — some sites benefit from a different configuration or a higher-volume solution.

If you are unsure whether this tap is the right fit for your basin or installation, we are happy to talk it through before you place an order.

The KWC DVS F3S is a self-closing pillar tap designed for commercial and public washroom installations. It delivers pre-mixed hot, cold, or blended water depending on how it is plumbed, and shuts off automatically after a set duration once the user releases the push-top head. The stainless steel body is well suited to the hygiene demands of commercial environments.

In washroom settings with consistent footfall — staff facilities, customer-facing toilets in restaurants, or welfare areas in larger operations — taps that rely on users turning them off are a persistent source of water waste. The self-closing mechanism addresses that directly. There is no motorised or electronic component to maintain; the shut-off is handled by an internal cartridge, which keeps the design straightforward and reliable over extended use.

Practical advantages for operators include:

• Automatic shut-off reduces water waste without requiring user compliance
• Push-top operation is intuitive and accessible for all users
• Stainless steel construction resists corrosion in damp washroom environments
• Pre-mixed supply simplifies installation where a single blended feed is available
• Compact pillar format suits standard deck-mounted basin installations

Installation requires a pre-mixed water supply or appropriate blending valve upstream — the tap itself does not blend independently. Confirm basin deck thickness and hole centres are compatible before ordering, and verify that supply pressure falls within the cartridge's operating range. The 2-year warranty provides reasonable assurance for a specification-grade fitting.

This tap is a practical choice for catering businesses, hospitality venues, and food production facilities where washroom water efficiency and ease of maintenance matter. It is not intended for kitchen sink applications where a more heavy-duty or higher-flow fitting would typically be more appropriate.

If you are specifying taps across multiple washroom positions or need to confirm compatibility with your existing plumbing setup, our team is happy to talk it through before you commit to an order.

This KWC DVS deck mounted mixer tap is a straightforward, well-made tap intended for commercial sink installations where simplicity and reliability matter. It combines hot and cold supplies through a single swivel spout, and the lever handles allow for easy single-handed operation — useful in a busy kitchen environment where hands may be occupied or gloved.

The swivel spout is a practical feature when the tap is positioned centrally between a twin-bowl sink, allowing the flow to be directed into either bowl without repositioning anything. The chromium plated brass construction gives it the durability expected in a working kitchen, resisting the knocks and general wear that come with day-to-day use across a service period.

From an operational standpoint, this tap suits kitchens where a clean, functional fitting is needed without unnecessary complexity. Key practical points include:

• Lever handles that are easy to operate with wet or gloved hands
• Swivel spout suitable for twin-bowl sink configurations
• Chromium plated brass construction built for regular commercial use
• Compatible with standard sink decks drilled at 180mm centres
• Low-profile design well suited to smaller sink installations

Installation requires a sink deck or surface drilled to accept a tap at 180mm centres. It is a deck-mounted fitting, so surface drilling or a pre-drilled sink is a prerequisite. There are no specialist water pressure requirements beyond standard mains supply, but it is worth confirming compatibility with your existing plumbing configuration before ordering.

This tap is well suited to smaller commercial kitchen setups, staff welfare areas, prep sinks, or any installation where a reliable, no-frills mixer tap is needed. For high-throughput pot wash or heavy-duty sink stations, a more robust or wall-mounted option may be worth considering.

If you are unsure whether this tap suits your sink configuration or plumbing setup, we are happy to help you work through the details before you order.

The Vogue Twin Pedestal Mini Pre-Rinsers are a compact, wall-mounted rinsing solution designed for use at commercial dishwash and pot wash stations. The unit comes pre-assembled and features a stainless steel outer sleeve over a santoprene inner pipe — a combination that gives the hose assembly durability under daily use while remaining practical to handle. A restraining hook keeps the hose under control when not in use, which matters in a busy kitchen where trailing hoses quickly become a hazard.

In practice, this type of pre-rinser earns its place in kitchens where staff need to quickly clear plates, trays, or pots before they go into the dishwasher. Having twin pedestals means the unit can serve two positions simultaneously, which helps maintain throughput at the dishwash station during peak service without creating a bottleneck. The quarter-turn (90°) operation keeps use straightforward for kitchen porters working at pace.

Practical benefits include:

• Pre-assembled out of the box — minimal setup time on installation
• Stainless steel outer sleeve gives good resistance to knocks and general kitchen wear
• Restraining hook keeps the hose managed and reduces slip hazards
• Quarter-turn valve makes operation quick and consistent under pressure
• Half-inch inlet connection is compatible with standard commercial plumbing supplies

Installation requires a cold water supply with a half-inch inlet connection and appropriate wall fixings for a secure, stable mount. The unit is not suitable for hot water supply. As with any pre-rinser installation, ensure adequate drainage is in place to handle the additional water volume during use. The compact footprint makes it workable in tighter dishwash areas, though the hose length should be checked against your sink or pass-through dishwasher position before ordering.

This pre-rinser suits small to medium kitchens — cafés, pub kitchens, school canteens, and similar operations where a practical, reliable rinsing point is needed without the footprint or cost of a heavier-duty gantry-mounted system. For high-volume operations running continuous dishwash cycles, a more robust pre-rinser setup may be worth considering.

If you're unsure whether this unit will work with your existing plumbing setup or dishwash station layout, we're happy to talk it through before you order.

These Vogue lever basin taps are a straightforward, reliable fitting for commercial handwash basins. Sold in pairs and designed around a quarter-turn (90°) lever action, they offer quick, controlled flow without the wear issues associated with traditional pillar taps that require multiple turns to operate. WRAS approval confirms they meet UK Water Regulations Advisory Scheme standards — a requirement in many commercial and hospitality settings where compliance with water fittings regulations is expected.

In a working kitchen environment, ease of operation matters. Staff wearing gloves or with dirty hands can open and close lever taps cleanly without gripping, which supports basic hand hygiene practice without adding friction to the process. The quarter-turn mechanism also reduces the likelihood of taps being left partially open, which tends to waste water and accelerate wear over time.

• Quarter-turn operation — fast, deliberate control with minimal effort
• WRAS approved for use in commercial water supply systems
• Sold in pairs, suited to standard twin-tap basin fittings
• Lever handle design accessible with gloved or wet hands
• Compact form suitable for most standard commercial handwash basins

Installation is straightforward for any competent plumber familiar with commercial basin fittings. These taps are suited to standard basin configurations and are typically used in back-of-house hand wash areas, staff facilities, and prep areas. They are not designed for pot or dishwash sink applications — for high-throughput sink runs, a dedicated sink tap or pre-rinse assembly would be more appropriate.

These taps are a practical, compliant choice for operators fitting out or replacing basin taps in catering kitchens, cafés, or food service facilities where WRAS-approved fittings are required. If you are unsure whether these are suitable for your basin or plumbing configuration, our team is happy to help you confirm the right fit before you order.

The Vogue Monobloc Pre-Rinse Spray with Mid Tap is a combined spray rinser and tap unit designed for use at commercial sink stations. The spray head delivers a strong, directed flow to clear food debris from plates, trays, and cookware before they go into the dishwasher, while the integrated mid tap provides standard hot and cold water supply from a single monobloc fitting. Both components are mounted together, making installation straightforward at a single inlet point.

In a working kitchen environment, a pre-rinse spray earns its place at the pot wash or dish return station. Removing solid food residue before dishwasher loading reduces the risk of blocked spray arms, keeps wash water cleaner for longer, and helps the machine perform consistently through a busy service. This is particularly relevant in kitchens running continuous dishwasher cycles during peak periods.

Practical benefits of this unit include:

• Combined tap and spray head from a single monobloc fitting, reducing plumbing complexity
• Spray rinser clears food debris quickly, protecting dishwasher performance
• Robust stainless steel construction suited to daily commercial use
• Straightforward to operate with no complicated controls at the sink

Installation requires a standard twin hot and cold water supply. As with any sink-mounted fitting, check the deck thickness and hole diameter of your sink or worktop before ordering to confirm compatibility. The monobloc format means both functions share a single mounting point, which suits most standard commercial sink configurations.

This unit is well suited to small and medium-sized kitchens — cafés, pub kitchens, school canteens, and similar operations — where a reliable, no-fuss pre-rinse setup is needed. For higher-volume sites processing very large quantities of covers continuously, a heavier-duty wall-mounted pre-rinse unit with greater flexibility may be worth considering.

If you are unsure whether this fitting is compatible with your existing sink or plumbing setup, we are happy to talk it through before you order.

The KWC DVS Aquarius is a sensor-operated hand-wash tap designed for commercial and public-facing environments where hygiene and reliability are the primary requirements. The 150mm spout height suits standard hand-wash basins commonly found in commercial kitchen washrooms, staff welfare areas, and front-of-house washroom facilities. It is supplied with a 15mm PEX hose for straightforward connection to standard pipework.

In day-to-day commercial use, touchless operation removes one of the more common cross-contamination points in a busy kitchen or washroom environment. There are no handles to touch after washing, which is a practical consideration in food-preparation settings where hygiene compliance is monitored. The integrated flow control helps manage water consumption consistently across high-footfall periods without requiring staff adjustment.

From an operational standpoint, this tap offers several practical advantages:

• Touchless activation reduces cross-contamination risk at hand-wash points
• Integrated flow control supports consistent water use without manual intervention
• Stainless steel construction is durable and straightforward to wipe down
• Sensor operation removes mechanical wear points associated with lever or twist fittings
• Compact footprint suits standard commercial hand-wash basin installations

Installation requires a 15mm cold and hot water supply, and the sensor will need an appropriate power source — confirm your existing basin setup supports sensor tap wiring before ordering. The 150mm spout height is suited to standard basin depths; if your basin is unusually deep or shallow, it is worth checking the spout reach is appropriate before proceeding.

This tap is well suited to commercial kitchens, food service operations, and hospitality venues where washroom hygiene standards form part of a food safety compliance regime. It is a practical choice for single-basin hand-wash stations rather than high-throughput multi-basin washroom banks, where a higher-output or multi-tap solution may be more appropriate.

If you are unsure whether the 150mm spout height or sensor specification suits your existing basin arrangement, the team is happy to go through the details with you before you order.

This is the genuine replacement mid-faucet tap designed specifically for the Vogue CE984 and CE985 pre-rinse spray systems. When the tap body on your existing pre-rinse unit fails or develops a fault, fitting the correct manufacturer part is the straightforward way to restore full function without replacing the entire assembly.

In a busy pot wash area, a pre-rinse unit takes considerable daily punishment — high cycle rates, temperature fluctuations, and constant handling. The mid-faucet tap is the component most exposed to wear over time, so having the correct spare to hand reduces the risk of extended downtime during service. Using a genuine Vogue part ensures the fit and flow characteristics match the original specification, which matters for maintaining consistent water pressure through the spray arm.

From a practical standpoint, this replacement makes sense for any operation already running CE984 or CE985 units that wants to keep a spare in stock, or that needs to carry out a straightforward repair rather than sourcing a like-for-like substitute that may not seat correctly.

It is worth confirming your existing unit's model reference before ordering — this tap is compatible with the CE984 and CE985 specifically and may not be suitable for other Vogue pre-rinse models. If you are unsure whether this is the right component for your unit, or if you are experiencing a fault that may indicate a wider issue with the spray system, our team is happy to help you work through it before you commit to a part.

The KWC DVS Single Station Antimicrobial Mains Kit is a plumbing supply kit designed to connect a single automatic tap directly to a standard mains pressure water supply. It is built for use on standard pressure systems operating between 1 and 7 BAR, making it compatible with the majority of commercial mains-fed installations in the UK without the need for additional pressure regulation in most cases.

The antimicrobial construction is a practical consideration in commercial food preparation and healthcare-adjacent environments, where surface hygiene and the inhibition of bacterial growth on contact surfaces are part of broader hygiene compliance. This is not a feature to overlook in kitchens operating under food safety regulations or in facilities with high handwashing frequency.

At its core, this is a straightforward installation component rather than a complex piece of equipment. Its value lies in reliability and compatibility:

• Designed specifically for use with automatic sensor-operated taps
• Antimicrobial materials help reduce bacterial growth on the unit itself
• Suitable for standard mains pressure systems from 1 to 7 BAR
• Compact form factor suits under-counter or confined installation spaces
• Pairs with KWC DVS automatic tap ranges for a matched installation

Before specifying this kit, it is worth confirming your site's static water pressure falls within the compatible range. Sites with unusually low or high pressure, or those fed via a boosted or unvented system, may require a different configuration. The kit is intended for single-station use only, so multi-tap or back-to-back installations would require separate provisions.

This kit is well suited to single-basin handwash stations in commercial kitchens, food preparation areas, or washrooms where an automatic tap is being installed or replaced on a standard mains supply. If you are unsure whether this kit is the right match for your tap model or water supply setup, it is worth getting in touch before ordering.

The Vogue Monobloc Pre-Rinse Spray is a combined spray arm and mid tap unit designed for commercial sink stations. It provides a dedicated pre-rinse point ahead of the dishwasher, allowing kitchen staff to clear food debris from crockery, cookware, and utensils before loading. The spring-action gooseneck arm returns to position automatically after use, keeping the workstation tidy during busy service periods.

In a working wash-up environment, speed and reliability at the sink matter more than most operators anticipate. The pre-rinse stage reduces the amount of soiling that reaches the dishwasher, which helps maintain wash quality over repeated cycles and can extend the interval between dishwasher chamber cleaning. The trigger-operated spray head gives staff control over water delivery without leaving taps running between items, which is a practical consideration where water and energy costs are a concern.

A few practical benefits worth noting:

• Ceramic cartridge valves provide a reliable seal and resist the wear that causes dripping over time
• Hot and cold connections allow temperature adjustment at the spray head
• Holder attachment keeps the spray head secure when not in use, reducing knock damage
• Spring-action gooseneck accommodates large pots and sheet trays as well as standard crockery
• Trigger-controlled flow avoids continuous running between items

Installation requires both a hot and cold water supply to the monobloc body, so the sink position needs to be plumbed accordingly. This is a standard monobloc fitting suitable for most commercial sink decks, but it is worth confirming the deck thickness and fixing arrangement before ordering. The unit includes the mid faucet tap as part of the assembly.

This tap is well suited to small and medium kitchen operations — cafés, pub kitchens, school canteens, and similar settings where a single pre-rinse point serves the wash-up area. Higher-volume operations running multiple rack dishwashers may find a more heavy-duty pre-rinse unit with greater flow capacity better suited to their throughput requirements.

If you are speccing a new sink station or replacing existing pre-rinse equipment and want to talk through what will work best for your setup, the team is happy to help.

The KWC DVS Medi-Spout is a single-station sensor tap designed specifically for environments where hand hygiene standards are non-negotiable. It combines a non-contact infrared sensor with an antimicrobial spout moulded from ABS incorporating Biomaster silver ion technology, which actively inhibits the growth of waterborne biofilms on the spout surface. The unit ships with a mains kit, sensor, and a four-piece starter pack to support initial installation and the recommended quarterly spout replacement programme.

In food preparation and healthcare-adjacent environments, cross-contamination via tap surfaces is a genuine hygiene risk. The non-touch operation removes the need to contact the tap at any point during handwashing, which is particularly relevant in high-throughput prep kitchens, wash-up areas, and any zone operating under strict HACCP controls. The infrared sensor comes factory pre-set for water flow, though the parameters can be adjusted using the DVS handheld programmer, which is available separately and worth having on site if your operation requires fine control over flow duration or activation sensitivity.

Practical operational advantages include:

• Non-touch infrared operation reduces cross-contamination risk at the handwash point
• Biomaster antimicrobial spout inhibits biofilm growth between uses
• Colour-coded spout options support a structured quarterly replacement regime
• Flow parameters are field-adjustable via the DVS handheld programmer
• Mains-powered with sensor included — no battery maintenance required

Installation requires a mains power supply to drive the sensor and solenoid, so this is not a straightforward tap swap if your existing sink position lacks an adjacent power source. It is worth confirming electrical access and proximity to the intended installation point before ordering. The unit is designed for single-station use, so multi-basin installations will require multiple units or a different product configuration.

This tap is well suited to food preparation sinks, dedicated handwash basins in catering kitchens, and any environment where hygiene audit compliance is a regular requirement. It is equally applicable in healthcare or clinical food service settings. For sites with multiple wash stations or where a networked programmable setup would be more practical, it is worth discussing the wider DVS range before committing to a single-station solution.

If you are unsure whether this configuration suits your sink layout or hygiene specification, our team is happy to talk it through before you place an order.