Cup Dispensers

The San Jamar C3165TBL is a wall or surface-mountable pull-type water cup dispenser designed for medium-sized flat-bottom and cone cups in the 64–83mm diameter range. The dispenser uses a simple pull-through mechanism that allows customers or staff to retrieve a single cup cleanly, without touching adjacent cups. The Arctic Blue finish makes it a practical choice where hygiene visibility and a tidy service point matter.

In a busy self-serve or staffed beverage station, reliable cup dispensing is often overlooked until it causes a problem. This unit keeps cups contained, protected, and consistently accessible throughout service. The transparent tube allows staff to monitor cup levels at a glance without interrupting service to investigate, and the flip cap keeps the cup stack covered between refills, reducing the risk of contamination from airborne debris or handling.

The practical benefits for a working operation include:

• Self-adjusting mechanism accommodates a range of compatible medium cup sizes
• Transparent tube gives instant visibility of remaining cup stock
• Flip cap protects cup stack and simplifies refilling without full disassembly
• Impact-resistant plastic construction holds up in high-traffic service environments
• Mounting bracket suits countertop coolers or any flat wall or surface

Installation is straightforward — the included mounting bracket allows the unit to be fixed to a flat surface or positioned on a cooler. No tools or specialist fitting are required beyond basic surface fixing. It is worth confirming cup compatibility before ordering, as the dispenser is sized for medium cups within the stated diameter range and will not reliably accommodate cups outside that specification.

This dispenser is well suited to cafés, canteens, healthcare facilities, leisure sites, and any operation running a self-serve drinks station where hygiene and tidiness at the point of service are a priority. For very high-volume sites dispensing larger cup formats, a higher-capacity or different-sized model may be more appropriate.

If you're unsure whether this unit suits your cup range or station setup, our team is happy to help you confirm the right fit before you order.

The San Jamar C4160WH is a wall- or cooler-mounted pull-type dispenser designed to hold and dispense small flat-bottom and cone water cups in the 57–73mm diameter range. It is a straightforward, practical piece of front-of-house or breakroom kit that keeps cups protected, orderly, and easy to access without handling the cup rim.

In busy service environments — waiting areas, staff canteens, hospital corridors, or alongside water coolers in office kitchens — dispensers like this earn their keep by keeping cups clean and reducing the kind of handling that creates hygiene concerns. The flip cap keeps the cup stack covered between refills, and the transparent tube body lets staff see at a glance when the dispenser needs topping up, avoiding the situation where a cup stack runs out unnoticed during a busy period.

From an operational standpoint, the main practical advantages are:

• Flip cap protects cups from dust, splashing, and incidental contact
• Transparent tube allows quick visual stock checks without opening the unit
• Self-adjusting design accommodates both flat-bottom and cone cup formats
• Mounting bracket suits water coolers or any flat vertical surface
• Refilling is straightforward and does not require tools or removal of the unit

Installation is simple — the unit mounts via a bracket to a wall or directly to a water cooler. No electrical or plumbing connections are required. It is worth confirming your cup diameter sits within the 57–73mm range before ordering, as San Jamar produce dispensers in several size formats to suit different cup stocks. If you are equipping multiple locations or need a larger-capacity or stainless-finished version, there are alternatives within the range worth considering.

This dispenser is well suited to lower-volume settings: office kitchens, waiting rooms, small staff canteens, and any position alongside a water cooler where a clean, contained cup supply is needed. It is less appropriate for high-throughput hospitality or healthcare settings where a higher-capacity or more robust unit would be more practical.

If you are unsure which size or finish best suits your cup stock and location, the team is happy to point you in the right direction before you order.

The San Jamar C3260TBL is a pull-type water cup dispenser finished in Artic Blue, designed to hold and dispense large flat-bottom or cone-style water cups in the 70–86mm diameter range. It mounts to a cooler or any flat vertical surface, making it a practical addition to self-serve drink stations, canteen counters, or front-of-house hydration points.

In busy service environments, the ability to keep cups hygienic, accessible, and clearly stocked matters more than it might seem. The flip cap on this dispenser keeps the cup stack covered between uses, reducing contamination risk in open or high-footfall areas. The transparent tube body allows staff to check cup levels at a glance without removing the dispenser or disturbing the stack — a small but useful advantage during a busy service period when restocking needs to be anticipated rather than reactive.

Practical operational benefits include:

• Flip cap protects cup stack from dust, debris, and handling contamination
• Transparent tube allows quick visual stock checks without opening the unit
• Self-adjusting mechanism accommodates a range of cup profiles without manual adjustment
• Mounting bracket suits cooler-top or flat-wall installation with minimal fixings
• Pull-type dispensing delivers one cup at a time cleanly and consistently

Installation is straightforward — the included mounting bracket requires only a flat surface and basic fixings. There are no electrical or plumbing requirements. The unit is suited to lower-volume sites such as small cafés, waiting areas, or office kitchens. For higher-throughput operations dispensing cups continuously across a full service, a larger-capacity or multi-stack dispenser may be a more practical choice.

This dispenser is well suited to sites that need a clean, tidy cup station without a complex setup — buffet counters, water cooler points, or staff canteens where presentation and hygiene matter but volume is modest. If you're unsure whether this unit fits your intended setup, the team is happy to talk it through.

The Bonzer 13013-02 is a countertop-mounted dispenser designed to hold disposable cups and lids in a tidy, accessible arrangement at the point of service. Rather than leaving stacks of cups loose on the counter, the holder keeps them upright, protected, and ready to grab during busy periods — a small but practical improvement to any beverage station.

In high-turnover café and coffee bar environments, cluttered counters slow service and create hygiene risks. A dedicated cup and lid holder removes the guesswork, keeps consumables within easy reach, and reduces the chance of cups being knocked over or contaminated. The spring-tensioned mechanism is calibrated to release one cup at a time, which helps maintain a consistent flow without fumbling during peak service.

• Keeps cups and lids organised and accessible at the service point
• Spring-tension mechanism releases one cup at a time for clean, quick service
• Accommodates a range of cup and lid sizes across its compartments
• Compact footprint suits tight countertop layouts
• Wipe-clean plastic construction supports basic hygiene routines

Installation is straightforward — the unit sits on the countertop without any fixings required. It is suited to cafés, quick-service outlets, hospitality bars, and anywhere disposable cups are used at volume. For sites running very high cup volumes across multiple service points, it is worth considering whether a wall-mounted or under-counter dispensing solution would better suit the workflow.

If you are unsure whether this model matches your cup or lid sizes, or want to discuss how it fits into a wider beverage station setup, the team is happy to help you work that out before you order.

The San Jamar C3200EV is a vertical, surface-mounted dispenser for cups in the 6 to 10oz (180 to 300ml) range, with rim diameters of 56 to 81mm. It is built for fixed installation at beverage stations, self-service areas or behind counters, wherever you want cups presented cleanly and consistently through service. The body is 304 stainless steel, which stands up to regular cleaning and wipe-downs.

It suits moderate-volume sites where cups are drawn steadily rather than in rapid bursts. The adjustable collar is the key part: it is set to the rim diameter of the cup you use, which reduces the chance of several cups coming out at once or jamming. It is worth taking time to set the collar correctly for your cup stock during installation.

• Keeps cups enclosed and protected from handling contamination
• Frees up counter space compared with open cup stacking
• Single-cup dispensing reduces waste during busy service
• 304 stainless steel construction wipes clean quickly
• Vertical mounting keeps the footprint compact at the point of use

Fit it to a flat surface or wall with enough clearance to load cups from below. The dispenser is fixed in place, so choose a mounting position with refilling in mind, as an awkward location makes restocking slower than it needs to be. Check that your cup rim diameter falls within 56 to 81mm before ordering.

Suited to cafés, staff canteens, waiting areas and self-service beverage stations with moderate throughput. For higher-volume sites, larger cup formats, or where a freestanding or countertop unit is needed, another configuration may suit better.

If you are unsure whether this model fits your cups or setup, call 01304 827272 and we will help you work through the options.

The San Jamar C3500CF is an in-counter cup dispenser designed to hold and dispense large-format cups with a rim diameter of 101 to 124mm. It mounts into a counter cut-out and presents cups at an angle, allowing staff to retrieve a single cup cleanly with one hand without breaking stride — a small but meaningful advantage during a busy service period.

Cup dispensing is one of those functional details that rarely gets attention until something goes wrong. A dispenser that allows cups to jam, drop, or nest badly creates friction at the point of service and slows throughput. The C3500CF uses a patented adjustable collar that conforms to the cup in use and a locking mounting ring that holds the unit securely within the counter without requiring additional support. Interchangeable springs allow the dispenser to be matched to different cup types, which helps maintain consistent feed even as cup stock varies between deliveries.

• Adjustable collar conforms to cup dimensions without tools
• Locking mounting ring provides a stable, self-supporting counter fit
• Angled presentation supports smooth one-handed retrieval at pace
• Interchangeable springs matched to cup type for consistent dispensing
• Stainless steel construction resists corrosion in wet service areas

Installation requires a counter cut-out of the correct diameter. This unit is designed solely for in-counter use and is not suitable for surface or wall mounting. It is a practical choice for self-service beverage counters, café service lines, fast-casual restaurants, and staff canteens where a fixed, tidy dispensing point is preferred over a loose cup stack.

This model works best where a single cup size in the 101 to 124mm rim range is used consistently. Operations dispensing several cup formats, or very high-volume venues cycling through large quantities of cups rapidly, may find a different configuration from the wider range more appropriate.

If you are working out which cup dispenser suits your counter layout or cup specification, we are happy to help you get that right before you order.

The San Jamar C3200CV is an in-counter cup dispenser designed to hold and present 6 to 10oz cups at counter level through a fixed cut-out in the service surface. Rather than sitting on top of the counter, the unit sits within it, keeping cups accessible while leaving the work surface clear. It is constructed from 304 stainless steel, which holds up well to the regular cleaning and hygiene requirements of a commercial beverage station.

In practice, this type of dispenser is well suited to moderate-volume service points — staff canteens, café self-serve stations, water or juice counters, and similar environments where cups need to be within easy reach without cluttering the counter. The adjustable collar accommodates the rim diameter variation that exists across different cup brands, reducing the likelihood of cups dropping through or jamming mid-service. Spring selection allows the unit to be configured appropriately for either paper or polystyrene cups, which behave differently under spring tension and are worth considering when specifying.

• Adjustable collar reduces jamming and drop-through across different cup brands
• Spring options allow configuration for paper or polystyrene cup types
• Stainless steel construction supports daily cleaning and hygiene compliance
• In-counter position keeps cups accessible without occupying surface space
• Patented mounting ring locks securely into the counter cut-out

Installation requires a counter cut-out to the correct diameter, which should be confirmed against the dispenser specification before ordering — counters vary in material and thickness and it is worth checking compatibility first. The unit is not suitable for wall or overhead mounting; it is designed specifically for in-counter use. For higher-volume sites or operations dispensing larger cup formats, a higher-capacity model may be a more practical fit.

This dispenser is a practical choice for light to moderate service environments where a tidy, hygienic cup presentation is needed in a compact footprint. If you are unsure whether it suits your counter setup or cup range, we are happy to talk it through.

The San Jamar C4160TBL is a pull-type water cup dispenser designed to hold small flat-bottom and cone cups in the 57–73mm diameter range. It mounts directly onto water coolers or any flat surface, keeping a supply of cups hygienically enclosed and readily accessible at the point of use.

In practice, these dispensers are a straightforward solution for staff canteens, waiting areas, healthcare settings, and any site where a water cooler is in regular use. The flip cap keeps cups protected from dust and handling between refills, and the transparent tube makes it easy to see at a glance when stocks are running low — useful in busy environments where a dispenser running empty during service can cause unnecessary disruption.

• Self-adjusting mechanism accommodates both flat-bottom and cone cup formats
• Flip cap protects cup stack from airborne contamination between refills
• Transparent tube allows quick visual check of remaining cup stock
• Mounting bracket suits water coolers and standard flat wall surfaces
• Compact footprint suits space-restricted installations

Installation is straightforward — the bracket fixes to a cooler or wall surface without specialist tools. It is worth confirming cup compatibility before ordering, as not all small cup formats fall within the 57–73mm range this model is designed for. If your site uses a different cup size, a different dispenser model will be needed.

This dispenser is well suited to low- to medium-footfall locations where a compact, hygienic cup dispensing solution is required alongside an existing water cooler. For higher-volume catering environments or front-of-house buffet setups, a larger-capacity unit would be more appropriate.

If you are unsure whether this unit is the right fit for your cups or your installation, feel free to get in touch — it is a simple question and worth checking before you order.

The San Jamar C3250SS is a pull-type water cup dispenser constructed in stainless steel, designed to hold and dispense large water cups in the 70–86mm diameter range. It accommodates both flat-bottom and cone-style cups and is intended for wall or flat-surface mounting, making it a practical addition to service counters, beverage stations, and cooler-side setups.

In a busy service environment, a reliable cup dispenser does a small but important job — keeping cups accessible, hygienic, and easy to replenish without slowing down service. The pull-type mechanism allows staff and customers to retrieve a single cup cleanly, reducing contact with the remaining stack. The flip cap helps protect stored cups from airborne contamination, which matters in open-counter or self-serve settings where hygiene standards need to be maintained throughout service.

Practical advantages of this dispenser include:

• Stainless steel construction resists corrosion and wipes down easily between services
• Self-adjusting fit accommodates a range of cup profiles within the 70–86mm band
• Flip cap protects cup stack from dust and contamination during service
• Mounting bracket suits cooler units or any flat vertical surface
• Pull-type dispensing minimises unnecessary contact with the cup supply

Installation is straightforward — the unit mounts via a bracket to a flat surface or cooler side and requires no utilities. It is worth confirming your cup size falls within the compatible diameter range before ordering, as this model is sized for larger water cups and will not suit standard 70mm or smaller portion cups.

This dispenser is well suited to canteens, healthcare facilities, water cooler stations, buffet counters, and any operation where self-serve cup access needs to be hygienic and orderly. For sites with unusually high cup throughput or where a larger-format dispenser is needed, it is worth exploring whether a higher-capacity option would be more appropriate.

If you are unsure whether this model is the right fit for your setup, our team is happy to help you work through the options.

The San Jamar C3400P is a pull-type cup dispenser designed to hold and dispense 12 to 24oz paper, plastic or foam beverage cups in commercial service environments. A patented self-adjusting collar accommodates cups across a range of rim diameters, removing the need to swap out components when cup stock changes.

In busy service settings — cafés, canteen serveries, hospital catering, fast food counters — having cups accessible and consistently dispensed without fumbling or toppling makes a practical difference during peak periods. The pull-type mechanism delivers one cup at a time cleanly, keeping the stack secure and reducing the likelihood of cups being handled unnecessarily, which supports basic hygiene standards at self-service or staff-operated stations.

Practical advantages for day-to-day operation include:

• Self-adjusting collar accepts paper, plastic and foam cups without manual adjustment
• High-impact stainless steel tube construction holds up well to frequent daily use
• Flexible mounting — counter-standing, wall-mounted horizontally, vertically or at 45 degrees
• Frees counter space when wall-mounted, useful in tight service areas
• Compatible with a broad rim diameter range, reducing stock compatibility concerns

Installation is straightforward. The dispenser can be surface-mounted to most wall types or used free-standing on a counter via its mounting ring. No electrical or water connections are required. For wall mounting, access to appropriate fixings for the surface type is worth confirming before installation, particularly on tiled or composite surfaces.

This dispenser suits single-point beverage stations in cafés, office kitchens, hospital wards, canteens and similar environments with moderate cup throughput. For very high-volume sites dispensing continuously across multiple service points, a multi-stack or higher-capacity dispensing solution may be worth considering.

If you're unsure which dispenser configuration best fits your station layout or cup stock, our team is happy to talk it through.

The San Jamar C4150SS is a wall- or cooler-mountable pull-type dispenser designed for small flat-bottom and cone water cups in the 57–73mm diameter range. It is built in stainless steel, making it a practical choice for environments where hygiene presentation and durability matter — front-of-house water stations, staff refreshment areas, and alongside cooler units in healthcare, hospitality, and food service settings.

In day-to-day service, the pull-type dispensing mechanism allows users to retrieve a single cup cleanly without touching remaining stock. The hinged flip cap keeps unused cups covered between refills, which is particularly relevant in open-plan or customer-facing areas where airborne contamination is a consideration. Refilling is straightforward — the cap opens fully and the tube loads from the top without tools or dismantling.

The stainless steel construction holds up well in environments where the unit may be wiped down regularly with commercial cleaning agents. The self-adjusting mechanism accommodates variation across compatible cup ranges without manual recalibration, which reduces day-to-day fuss when switching between cup suppliers.

• Flip cap protects cup stock and allows for quick, hygienic refilling
• Pull-type dispensing reduces contact with unused cups
• Self-adjusting fit suits a range of small flat-bottom and cone cups
• Stainless steel finish cleans down easily and withstands regular sanitising
• Bracket mounts to water coolers or any flat vertical surface

This dispenser is well suited to lower-to-medium footfall locations. For higher-volume sites dispensing larger cup formats, or where multiple dispense points are needed, it is worth considering a higher-capacity or multi-dispenser setup.

If you are unsure whether this unit suits your cup range or mounting situation, the team is happy to talk it through with you.

The San Jamar C4180TBLW is a wall-mounted or surface-mounted water cup dispenser designed for small flat-bottom and cone-style cups in the 57–73mm diameter range. It is a straightforward, pull-type dispenser built for high-frequency use in self-service or staff-facing beverage stations.

In practice, these dispensers are commonly found at water cooler stations, patient areas, staff canteens, and waiting areas where a steady throughput of single-use cups is needed throughout the day. The self-adjusting mechanism accommodates a reasonable range of cup sizes without manual reconfiguration, which reduces the small operational nuisances that come with mixed cup stock.

Key practical advantages include:

• Transparent tube allows cup levels to be checked at a glance, reducing the chance of running out during busy periods
• Flip cap keeps stored cups covered and hygienic between refills
• Pull-type dispensing delivers one cup at a time, minimising waste and contact with remaining stock
• Mounting bracket suits both flat-wall installation and attachment to cooler units
• Arctic Blue finish makes the unit straightforward to locate in a busy service area

Installation is simple — the unit mounts to any flat vertical surface using the supplied bracket and requires no power or water connection. It is worth confirming cup compatibility before ordering, as not all small cups fall within the 57–73mm throat range. For locations with very high footfall or where a larger cup format is in use, a higher-capacity or differently sized dispenser may be a more practical choice.

This model is well suited to lower-volume self-service points, water cooler stations, reception areas, and staff facilities. It is less suited to high-volume production environments where a larger-format or multi-position dispensing solution would be more appropriate.

If you are unsure whether this unit matches your cup stock or installation setup, the team is happy to help you confirm compatibility before you order.

The San Jamar C3200CF is an in-counter cup dispenser designed to hold and dispense 6 to 10oz cups at a fixed beverage station. It sits flush within the counter surface, presenting cups at an upward angle so each one is cleanly accessible to staff or self-serve customers without disturbing the stack below. It is a straightforward solution to a practical problem: loose cup stacks on a worktop are untidy, prone to being knocked, and harder to manage hygienically during a busy service.

In environments such as hospital catering points, staff canteens, coffee counters, and self-serve drink stations, controlled cup dispensing makes a tangible difference. The angled presentation means only the leading cup is touched during service, which supports basic hygiene discipline without requiring any deliberate change in staff behaviour. It is a quiet operational improvement rather than a dramatic one, but it holds up well over the course of a busy day.

• Adjustable collar accommodates a range of cup rim diameters across the 6–10oz size band
• Patented mounting ring secures the dispenser firmly in the counter without additional fixings
• Interchangeable springs can be matched to specific cup types to reduce jamming or double-dispensing
• Stainless steel construction is durable and easy to wipe down between services
• In-counter position keeps the counter surface clear and removes the risk of stacks being knocked

Installation requires a counter cut-out to accept the mounting ring. For most fabricated or solid-surface counters this is a routine task, but it is worth confirming cut-out dimensions with your counter installer or fabricator before ordering. This dispenser is intended for fixed, permanent beverage stations and is not suited to mobile or temporary setups.

This model is well suited to operations using a consistent single cup size across their service. Where a station needs to handle more than one cup size simultaneously, a twin or multi-tube configuration would be more practical.

If you want to confirm that your cup profile falls within the collar range, or have questions about what the counter cut-out involves, the team is happy to talk it through before you order.

The San Jamar C5250C Euro Sentry is an in-counter cup dispenser designed to sit flush within a counter or serving surface, presenting cups at counter level for clean, controlled dispensing. It accommodates a wide rim diameter range, making it compatible with a broad selection of standard disposable cups commonly used in cafés, canteens, hospital catering, and self-service beverage stations.

In busy service environments, the dispenser's elevator mechanism advances cups automatically as each one is removed, maintaining a consistent presentation without staff intervention. The adjustment mechanism can be set while cups are loaded, which reduces downtime during service if cups are changed between shifts or when switching cup sizes. The dispenser is designed to release one cup at a time, preventing the double-dispensing waste that tends to accumulate over a full service period.

From an operational standpoint, several features make this unit well suited to managed service and food safety-conscious environments:

• Contamination Guard helps prevent debris and airborne particles from entering the tube
• Food Safety Blue transparent tube allows a quick visual check of cup stock and cleanliness without disassembly
• Adjustable levers engineered to avoid marking or deforming cups during dispensing or loading
• Trim ring discourages tampering in self-service settings
• Tool-free adjustment is possible with cups already loaded, reducing service interruption

Installation requires a cut-out in the counter surface to the appropriate diameter. The unit drops into position and is held by the trim ring, so the counter surface material and thickness should be considered before ordering. No electrical or water connection is required.

This dispenser is a practical choice for self-service beverage points, front-of-house counters, and staff canteens where hygiene, neat presentation, and minimal maintenance are priorities. It suits moderate-volume sites well. For very high-throughput operations running multiple cup sizes or dispensing points simultaneously, it is worth discussing whether a different configuration would serve better.

If you are unsure whether this unit is the right fit for your counter setup or cup range, we are happy to talk it through before you order.

The San Jamar C5450C18 Sentry is an 18-inch in-counter cup dispenser designed for fixed installation into a countertop or serving station. It accepts cups with rim diameters in the 79–114mm range, making it suitable for a broad spread of standard disposable cup sizes used in cafés, canteens, fast food operations, and self-service beverage stations. The dispenser sits flush within the counter surface, keeping the cup stack contained, hygienic, and out of reach of general customer handling.

In a busy service environment, consistent cup dispensing matters more than it might appear. The Sentry's adjustable lever mechanism is engineered to release cups one at a time cleanly, which reduces the frustration of cups jamming, double-dispensing, or arriving at the counter crushed. The adjustment can be made even with cups already loaded, which is a practical advantage during a service period when stopping to clear and reload the dispenser is not realistic.

From an operational and hygiene standpoint, the design includes a contamination guard that limits debris entering the tube from above, and the tube itself is a translucent blue material — a recognised food safety colour — which allows staff to carry out a quick visual check on cup levels and cleanliness without dismantling anything.

• Trim ring around the counter opening discourages customer tampering
• Lever adjustment accessible during live service without unloading cups
• One-at-a-time dispensing reduces cup damage and waste
• Translucent blue tube supports quick hygiene and stock-level checks
• Compatible with a wide rim diameter range, reducing the need for multiple dispensers

This model is well suited to counters with a moderate to high throughput of hot or cold drinks — coffee shops, hospital or workplace canteens, and fast casual restaurant service stations being typical environments. For very high-volume sites where multiple cup sizes are in simultaneous use, it is worth considering whether a surface-mounted or multi-unit configuration would better serve the operation.

If you are unsure whether the C5450C18 is the right fit for your counter depth, cup stock, or service layout, our team is happy to talk it through with you.

The San Jamar C3500P is a pull-type cup dispenser designed to hold and dispense large-format cups in the 32 to 46oz range. It accepts paper, plastic, and foam cups with a rim diameter between 101 and 123mm, and suits self-service beverage stations, café counters, canteen service points, and front-of-house setups where one consistent large-format cup is used throughout the day.

In a busy service environment, cup dispensing is a small detail that causes real disruption when it goes wrong. The C3500P uses a self-adjusting collar that accommodates minor variation in cup dimensions within the supported size window, releasing one cup at a time with a straightforward pull action. This keeps the station tidy, limits unnecessary handling of unused cups, and is a practical consideration for any operation where hygiene at self-service points matters.

• Self-adjusting collar handles rim variation within the 101–123mm range reliably
• Pull-type action dispenses one cup at a time, reducing contact with unused cups
• Mounts horizontally, vertically, or at 45 degrees to suit available space
• Wall or counter mounting options free up worktop area on compact stations
• No electrical or plumbing connection required

Installation is straightforward — the unit secures to most wall surfaces or to a counter via its locking mounting ring, with no electrical or plumbing work involved. The most important step before purchasing is confirming that your cups fall within the 101 to 123mm rim diameter range. Cups outside this window will not seat or dispense correctly. This is a single-range unit, so any operation running more than one cup size will need a separate dispenser for each format.

The C3500P is well suited to cafés, canteens, fast food operations, and self-service beverage counters where a large-format cup is the consistent standard. Sites with multiple cup sizes in service, or higher-volume operations requiring greater capacity, may find it worth exploring whether a different configuration would serve better.

If you would like to talk through cup sizing or how to set up your beverage station, the team is happy to help you work it out before you order.

The San Jamar C4410PFSD is a wall-mountable, pull-type foam cup dispenser designed to hold and dispense 12 to 24oz foam beverage cups in a controlled, hygienic way. It is a straightforward piece of front-of-house or beverage station kit — cups are loaded from the top and dispensed one at a time from the base, keeping the stack protected and the service point tidy.

In practice, this type of dispenser earns its place at self-serve drink stations, hot beverage counters, and cooler fronts where staff or customers need quick, single-cup access without handling the whole stack. The self-adjusting mechanism accommodates the common range of foam cup sizes without requiring separate sizing rings, which reduces the fuss of switching between cup formats if your supplier changes batch dimensions slightly.

From an operational standpoint, the main advantages are straightforward:

• Frees up counter space by moving cups off the worktop and onto the wall or cooler face
• Protects cups from dust and handling via the gravity-fed, top-loading design with a removable flip cap
• Eliminates sizing ring changes across standard foam cup sizes in the 12-24oz range
• High-impact plastic construction holds up to frequent daily use without cracking or warping

Installation is minimal — the unit attaches to most wall surfaces and cooler fronts without specialist tools or trades involvement. There are no electrical, water, or gas connections required. The main practical consideration is positioning: mount it at a height that suits your service flow, and ensure the cup size you use regularly falls within the supported rim diameter range before ordering.

This dispenser is well suited to cafés, canteens, convenience counters, and self-serve beverage stations handling moderate daily cup volumes. For very high-throughput sites dispensing several hundred cups per session, a higher-capacity model or a countertop unit may be worth considering.

If you are unsure whether this unit suits your cup format or station layout, our team are happy to help you confirm the right fit before you order.

The San Jamar C3500CH is a horizontal counter-mount cup dispenser designed to handle large-format cups in the 32 to 46oz range, with rim diameters between 101 and 124mm. It mounts directly to the counter surface and presents cups horizontally, allowing staff or customers to draw a single cup cleanly without disturbing the remainder of the stack — a practical arrangement for any busy beverage service point.

In high-footfall environments, dispensing hygiene and speed matter equally. This unit keeps cups enclosed and protected from contact while remaining immediately accessible at point of service. The patented adjustable collar is a genuinely useful feature in operations where cup stock varies across suppliers or formats: rather than maintaining separate dispensers for each cup profile, the collar can be adjusted to suit the rim diameter in use, reducing the number of units required and saving time when stock changes. The locking mounting ring secures the dispenser to the counter without additional brackets, keeping the installation stable and tidy under constant use.

• Adjustable collar accommodates rim diameter variation without tool changes
• Locking mounting ring provides secure, self-supporting counter-level fitment
• Purpose-matched springs optimise the dispensing action for different cup types
• Stainless steel construction withstands daily use and regular cleaning regimes
• Horizontal cup presentation maintains hygiene and accessibility at point of service

Installation requires no electrical connection, plumbing, or ventilation. The unit mounts to the counter surface directly, so it is worth confirming that the counter material and thickness will accommodate the mounting ring securely before fitting. Cup stock should also be checked against the supported rim diameter range prior to ordering.

This dispenser is well suited to cafés, quick-service restaurants, staff canteens, and healthcare catering operations running a consistent volume of large-format cold or hot takeaway cups. Operations using smaller cup sizes, or requiring under-counter or in-counter configurations, will find alternative formats available within the San Jamar range.

If you would like to confirm compatibility with your current cup stock or discuss the best configuration for your service point, the team is glad to help before you commit to an order.

The San Jamar C3200CH is a horizontal counter-mount cup dispenser designed to hold and present 6 to 10oz cups at a fixed, accessible position on a beverage counter or service station. It mounts securely to the counter surface, keeps cups contained and hygienic, and delivers them one at a time through a spring-loaded mechanism. It is a straightforward, practical piece of equipment commonly found at café beverage counters, quick-service drink stations, and self-service points.

In a working service environment, having cups stored loose on a counter creates handling delays and hygiene risks. A mounted dispenser keeps the cup stack contained, presents each cup cleanly to staff or customers, and removes the fumbling that comes with grabbing from an open stack during a busy period. The adjustable collar on this model accommodates a range of cup rim diameters, which gives operators some flexibility if cup suppliers change or cup styles vary across the site.

• Adjustable collar fits different cup diameters within the supported range
• Spring-loaded delivery reduces double-dispensing during fast-paced service
• Counter-mount ring holds the unit firmly in place under repeated use
• Stainless steel construction is straightforward to clean and maintain
• Horizontal orientation suits counter runs where overhead clearance is limited

Installation requires no electrical connection or plumbing — the unit mounts directly to the counter surface. Before ordering, it is worth confirming that your cup rim diameter falls within the supported range and that a horizontal counter-mount orientation suits your counter layout. For environments with very high cup throughput or where an in-counter or wall-mounted configuration would work better, there are alternative mounting styles available.

This dispenser is well suited to cafés, beverage counters, canteens, and self-service areas handling moderate to steady cup volumes. If you are weighing up mounting options or want to confirm compatibility with your current cups, the team can help you work through it.

The San Jamar C3200EF is a surface-mount foam cup dispenser designed to accept 6 to 10oz foam cups with rim diameters in the 56–81mm range. It dispenses one cup at a time via an elevator mechanism, presenting the next cup cleanly at the opening and keeping the remainder protected within the tube. The unit is constructed from 26-gauge 304 stainless steel, giving it the durability expected in a busy front-of-house or self-service environment.

Where this dispenser earns its place is in speed-of-service situations — hot drink stations, self-serve beverage counters, waiting areas, and staff refreshment points — where staff or customers need to retrieve a cup cleanly and quickly without handling the stack below. The adjustable collar accommodates different cup sizes within the supported range, so operators do not need a separate dispenser for every cup specification they run.

A practical feature is the mounting flexibility. The C3200EF can be installed horizontally, vertically, or at a 45° angle, with the appropriate spring supplied for each orientation. This makes it adaptable to under-counter, wall, or end-panel positions — useful where counter space is limited or where a clean, built-in look is preferred. Key operational benefits include:

• Single-cup dispensing keeps the remaining stack hygienic and untouched
• Adjustable collar adapts to cup sizes within the supported range
• Three mounting orientations give installation flexibility in tight spaces
• Stainless steel construction is straightforward to wipe down and maintain

Installation requires only a flat surface or panel suitable for the fixing method chosen. No plumbing, electrical connection, or ventilation is needed. It is worth confirming your cup rim diameter against the 56–81mm specification before ordering, as the dispenser is designed for foam cups only and will not function correctly with paper or plastic alternatives.

This dispenser is well suited to cafés, canteens, hospital refreshment points, office kitchens, and any self-serve station running foam cups in the 6–10oz range. For sites dispensing larger cup formats or requiring a countertop-mounted or undercounter recessed solution, other configurations in the San Jamar range may be more appropriate.

If you are fitting out a beverage station and want to make sure the dispenser suits your cup specification and installation position, the team is happy to talk it through before you order.

The San Jamar C3400EV is a vertical, surface-mounted dispenser for cups in the 12 to 24oz (350 to 710ml) range, with rim diameters of 70 to 98mm. It mounts to a wall, under a counter or at the end of a beverage station, which frees up worktop space and keeps cups within reach at the point of use. The body is 304 stainless steel, which copes well with the damp, busy conditions around drinks stations.

Cups are presented one at a time, so staff and customers are less likely to pull out several at once. In a high-footfall operation that saves a surprising amount of waste. The adjustable collar can be set for different rim diameters within the supported range, so one unit suits a station that handles more than one cup size.

• Surface-mount design keeps counters clear and cups close to hand
• Adjustable collar fits cup rim diameters from 70 to 98mm
• 304 stainless steel construction wipes clean quickly and stands up to daily service
• One-at-a-time dispensing cuts down on over-grabbing and wasted cups
• No power or water connection needed, mounts with standard fixings

Check your cup rim diameter falls within 70 to 98mm before ordering, as the collar adjustment has limits. Mounting height matters too: whether staff or customers use the dispenser will affect where it sits most comfortably on the wall or counter end.

Suited to cafés, canteens, hotel beverage points and self-service areas serving hot or cold drinks. For much higher volumes, or where a recessed installation is needed, a different format may suit better.

If you'd like us to check your cup specification against this unit before you order, call 01304 827272 and we'll confirm the fit.

The San Jamar C3400EH is a horizontal surface-mounted cup dispenser designed to hold and dispense cups with rim diameters in the 70 to 98mm range, typically covering 12 to 24oz cups. It mounts flush to a counter surface or end-cap position, keeping a sleeve of cups protected, organised, and ready to pull without occupying the working surface above.

In practice, a well-positioned cup dispenser makes a noticeable difference to beverage station flow. Staff can retrieve a cup single-handed with a clean, consistent pull rather than lifting from a loose stack — a small efficiency that compounds quickly when queues build. The horizontal orientation keeps the unit low-profile, and the adjustable collar allows the dispenser to be set correctly for the cup in use rather than relying on a fixed-size fit.

• Adjustable collar sized for cups with rim diameters between 70 and 98mm
• Horizontal surface-mount format keeps cups at counter level without overhead reach
• Stainless steel construction handles the cleaning demands of a commercial environment
• Enclosed sleeve protects stacked cups from contamination between service periods
• Compatible with counter, wall, or end-cap mounting depending on station layout

Installation requires no cutting or recessing — the unit is surface-fixed, which makes it straightforward to position and reposition as layouts change. It is worth confirming your cup rim diameter before ordering; cups outside the 70 to 98mm working range will not dispense cleanly, and cup sizing does vary between suppliers. The unit is intended for dry counter environments and is not suited to wet or refrigerated applications.

This dispenser is well suited to cafés, fast-casual operations, self-service beverage counters, and staff canteens running a single cup size or a narrow range within the collar's working span. Operations that regularly switch between several cup sizes may find separate units per size, or a multi-sleeve dispenser, a more practical arrangement.

If you want to confirm the collar range works with your current cup supplier before committing, the team is glad to help you check.

The San Jamar C2010C is an in-counter portion cup dispenser designed specifically for small paper or plastic portion cups — the kind commonly used for sauces, dressings, condiments, and sample servings. It mounts flush into a counter cutout and presents cups one at a time through an elevator mechanism, keeping the stack protected and the service area tidy.

In busy service environments, dispensers like this earn their keep by reducing handling time and keeping portion cups hygienic and accessible. Rather than rummaging through a loose stack, staff lift a single cup cleanly from the dispenser — useful during peak service when speed and consistency matter. The EZ-Fit design accommodates a range of cup rim sizes within its supported range, with included gaskets allowing operators to switch between cup sizes without replacing the unit.

Practical advantages for day-to-day service include:

• One-at-a-time dispensing reduces contamination risk from handling
• In-counter mounting keeps the worktop clear and uncluttered
• Multiple gaskets included to cover different cup sizes within the supported range
• Impact-resistant construction holds up to regular commercial use
• Straightforward to reload without tools or disassembly

Installation requires a counter cutout to accept the dispenser body. The unit is designed for in-counter use, so it is not a surface-mount solution — the counter material and depth will need to suit the fit. It is best positioned where portion cups are needed most: sauce stations, salad bars, beverage counters, or self-service areas.

This dispenser is well suited to cafés, quick-service restaurants, staff canteens, and food-to-go operations where portion cups are a regular part of service. For operations running significantly higher volumes or requiring larger cup formats, it is worth checking whether a larger-capacity model would be more appropriate.

If you are unsure whether this unit fits your counter setup or cup specification, the team is happy to talk it through before you order.

The San Jamar C3165FBL is a wall or surface-mounted pull-type cup dispenser designed for medium water cups in the 64–83mm diameter range. It accepts both flat-bottom and cone-style cups, making it a practical choice for sites that use standard single-use water cups at self-service stations, buffet lines, water coolers, or beverage counters.

In busy service environments, a reliable cup dispenser is a small detail that has a noticeable impact on flow. Cups are dispensed one at a time with a downward pull, which keeps the remaining stack clean and reduces the chance of multiple cups being grabbed at once — a common source of waste in high-footfall settings. The transparent tube allows staff to monitor cup levels at a glance, so refilling can be managed before stock runs out mid-service rather than reactively.

Practical benefits for operators include:

• Flip cap protects the cup stack from airborne contamination between refills
• Self-adjusting mechanism accommodates a range of medium cup sizes without manual adjustment
• Transparent tube gives clear visibility of remaining cup levels
• Mounting bracket suits water coolers and flat wall or cabinet surfaces
• Impact-resistant plastic construction holds up to regular daily use

Installation is straightforward — the bracket mounts to most flat surfaces without specialist tools, and no electrical or plumbing connection is required. It's worth confirming cup diameter compatibility before ordering, as cup sizes vary between suppliers and not all medium cups fall within the stated range.

This dispenser is well suited to cafés, canteens, waiting areas, healthcare facilities, and anywhere a tidy, hygienic cup point is needed. It's a single-position unit, so sites with multiple service points will need one per station. For higher-volume sites or larger cup formats, alternatives with greater capacity or different size ranges may be more appropriate.

If you're unsure whether this model suits your cup stock or service setup, our team is happy to help you check compatibility before you order.

The San Jamar C4200PF is a wall-mounted, pull-type cup dispenser constructed from high-impact stainless steel and designed to hold foam beverage cups in the 4 to 10oz range. It is a straightforward piece of front-of-house or self-service kit — cups are loaded from the top and dispensed individually by pulling from the base, keeping the stack clean and accessible throughout service.

In a busy café, canteen, or beverage station, this type of dispenser earns its place by keeping cups organised, hygienic, and within easy reach without occupying counter space. The self-adjusting mechanism accommodates the range of foam cup sizes without requiring separate sizing rings, which is useful where a site uses more than one cup format across hot and cold drinks. The stainless steel construction is durable enough for frequent daily use and straightforward to wipe down as part of a routine hygiene check.

• Top-loading gravity-fed design with protective cap keeps cups clean between refills
• Self-adjusting sleeve fits foam cups across the 4–10oz range without adaptors
• Wall or cooler-mounted to free up counter space at busy service points
• Stainless steel tube resists impact and cleans down easily
• Removable cap allows quick, hygienic refilling during service

Installation is straightforward — the unit fixes to most wall surfaces or cooler sides using standard fixings, making it suitable for countertop beverage stations, self-service areas, or staff refreshment points. No electrical or plumbing connections are required. It is worth confirming that your foam cup stock falls within the 70–85mm rim diameter range before purchasing, as the dispenser is sized for that profile.

This dispenser suits cafés, canteens, healthcare catering, convenience stores, and any site running a self-service hot or cold drinks station with moderate to high cup throughput. If you're fitting out a larger or higher-volume station and need to consider multiple dispensers or a different mounting configuration, the team are happy to help you work out what suits the space.

The Bonzer 10110-01 is a wall-mounted cup dispenser designed for hygienic, one-at-a-time dispensing of small paper and foam cups in the 55-65mm diameter range. Constructed in stainless steel with Bonzer's gasket-based retention system, it holds a stack of cups securely while allowing each cup to be pulled cleanly from the base without disturbing the rest of the stack.

In practice, these dispensers are commonly used at water stations, self-service beverage points, and countertop drink dispensing areas in cafés, canteens, healthcare facilities, and office environments. The wall-mounted format keeps the dispensing point fixed and accessible, frees up counter space, and reduces the handling of loose cup stacks during busy periods.

The practical advantages of this type of dispenser are straightforward:

• Reduces contact with unused cups, supporting basic hygiene standards
• Wall-mounted position keeps cups consistently accessible and at a fixed height
• Stainless steel construction withstands regular cleaning and damp environments
• One-at-a-time dispensing minimises waste and cup spillage
• Simple, low-maintenance design with no moving mechanical parts

Installation requires a suitable wall surface capable of supporting the unit. The dispenser is sized specifically for cups in the 55-65mm diameter range — fitting the correct cup diameter is important for reliable dispensing, so it is worth confirming your cup size before ordering. For operations using larger cups, alternative dispenser sizes are available within the Bonzer range.

This dispenser suits smaller catering operations, healthcare settings, office kitchens, and self-service drink stations where a compact, practical cup dispensing solution is needed. If you are specifying dispensers across multiple stations or want to confirm cup compatibility, the team is happy to help.