Cup Dispensers

The San Jamar C3400CH is a counter-mounted cup dispenser designed to hold and dispense 12 to 24oz cups in a horizontal orientation. It sits on or through a counter surface, keeping cups within easy reach at beverage service points without occupying open counter space. It is compatible with cups in the 70 to 98mm rim diameter range, which covers a broad range of standard paper and plastic cup sizes commonly used in cafés, self-service stations, and front-of-house catering environments.

The spring-loaded mechanism advances cups as each one is removed, delivering consistent single-cup dispensing without staff needing to handle the stack. In busier service periods this matters — fumbling with loose cups slows down the counter and undermines hygiene. Keeping the stack enclosed also limits dust exposure and incidental contact, which is a practical consideration at any front-of-house drinks point.

• Adjustable collar accommodates different cup profiles within the supported rim range
• Spring mechanism delivers clean, single-cup dispensing at pace
• Counter-mount installation keeps the drinks station tidy and cups consistently accessible
• Stainless steel construction withstands daily cleaning routines without deterioration
• Locking ring secures the unit firmly to the counter during busy service

Installation does not require specialist tools — the dispenser mounts to the counter surface and the locking ring holds it securely in place. Before ordering, it is worth confirming the rim diameter of your specific cups, as compatibility depends on this. The adjustable collar gives some flexibility within the stated range, but it will not bridge a significant mismatch. For operations running multiple beverage points at high volume, a wall-mounted or multi-tube arrangement may be worth considering instead.

This dispenser is well suited to small to medium cafés, hotel beverage counters, self-service drink stations, and catering setups where a tidy, accessible cup point is needed without a complex installation. If you are unsure whether it will work with your cup size or counter configuration, our team is happy to help you confirm before you order.

The San Jamar C4500PF is a surface-mounted, pull-type dispenser designed to hold large-format foam beverage cups in the 32 to 46oz range. Cups are top-loaded into a stainless steel tube and dispensed one at a time from the base — a gravity-fed mechanism that is straightforward to operate and easy to restock mid-service without interrupting the flow of a busy counter.

The self-adjusting sleeve is a practical detail worth noting. Foam cups can vary slightly in diameter between batches and suppliers, and the sleeve accommodates that variation without needing separate sizing rings or adjustment. For sites that refill dispensers frequently or source cups from more than one supplier, this removes a small but genuine operational inconvenience. The stainless steel tube construction handles the repeated handling and incidental knocks typical of high-footfall service points, and the removable flip cap keeps the cup stack protected from dust and airborne contaminants between refills.

• Self-adjusting sleeve fits foam cup batches without additional parts or tools
• Pull-type dispensing limits cup contact, supporting front-of-house hygiene
• Top-loading design allows fast restocking without removing the unit
• Mounts to wall surfaces or upright cooler panels to free up counter space
• Stainless steel tube withstands regular handling in busy service environments

Fitting is uncomplicated — the unit mounts to most standard wall surfaces or cooler uprights using the supplied hardware, with no electrical or plumbing connections required. Before ordering, it is worth confirming that your cup stock falls within the supported rim diameter range, as foam cup dimensions can vary between manufacturers.

This dispenser is a practical choice for fast food outlets, convenience stores, cinema and leisure concessions, self-service canteens, and anywhere large cold drink cups are in consistent, high-volume use. Sites dispensing smaller cup formats, or those needing a countertop rather than wall-mounted configuration, will find alternative options within the wider range.

If you want to confirm compatibility with your existing cup stock before placing an order, the team is glad to help you work through that.

The San Jamar C3400CV is a vertical counter-mount cup dispenser designed for fixed beverage stations in front-of-house and back-of-house environments. It fits through a cut-out in the counter surface, holds a vertical stack of cups, and presents a single cup at a time for clean, one-handed dispensing. The adjustable collar accommodates cups in the 12 to 24oz range across a broad rim diameter span, making it a practical choice where cup stock occasionally varies between suppliers.

In a busy service environment, the value of a well-positioned cup dispenser is easy to underestimate. Cups stay enclosed and protected from dust and handling until drawn, staff and customers can take a single cup without disturbing the rest of the stack, and the counter-mount position keeps the service point tidy and the unit stable under repeated use. The adjustable collar also means the dispenser can adapt within the compatible size range without needing to be replaced when cup specifications change.

• Hygienic enclosed dispensing reduces contamination risk at the service point
• Single-cup delivery avoids fumbling and reduces cup waste during busy service
• Adjustable collar adapts to different cup profiles within the compatible range
• Stainless steel construction withstands regular cleaning without deteriorating
• Counter-mount fixing keeps the unit stable and the surface uncluttered

Installation requires a hole cut into the counter to accept the mounting ring. Once fitted, the unit locks in place and is self-supporting, making this a permanent or semi-permanent installation rather than a portable surface unit. It is well suited to fixed beverage points, not temporary or mobile setups. Before ordering, it is worth confirming that your cups fall within the 70 to 98mm rim diameter range, as cups outside this specification will not dispense reliably.

This dispenser works well in cafés, canteens, quick-service restaurants, and similar operations running a staffed or self-serve beverage station with consistent cup throughput. For sites dispensing very high volumes or using significantly larger cups, a higher-capacity format may be worth considering instead.

If you want to check that your current cup specification is compatible before committing, the team is glad to help you work it out.

The San Jamar C5250C18 Euro Sentry is an in-counter cup dispenser designed to present cups one at a time at the point of dispensing, keeping the counter clear while maintaining a consistent, hygienic supply. It accommodates cups with rim diameters in the 62–92mm range and sits flush within a counter cutout, making it a practical choice for self-service beverage stations, staffed coffee counters, and front-of-house drink service areas.

In busy service environments, reliable cup dispensing is often overlooked until it causes problems — cups jamming, being handled unnecessarily, or contaminated by debris settling into an open stack. The Euro Sentry addresses these issues with an enclosed tube design and an adjustable dispensing mechanism that can be set and fine-tuned even with cups already loaded, reducing service interruptions during peak periods. The dispenser presents one cup at a time, which supports consistent hygiene practice across self-service and assisted service alike.

Practical operational advantages include:

• Adjustable dispensing levers that can be set without unloading the dispenser
• Enclosed tube with a contamination guard that limits debris entry from above
• A transparent tube section allowing quick visual stock checks without opening the unit
• A trim ring that keeps the counter installation neat and discourages tampering
• One-at-a-time dispensing that reduces unnecessary cup handling

Installation requires a counter cutout to the correct diameter for an 18-inch tube unit. The dispenser drops into the counter from above, with the trim ring sitting flush on the surface. No electrical or water connections are needed. It is worth confirming your cup range before ordering — the 62–92mm rim diameter range covers many standard soft drink and hot beverage cups, but cup compatibility should be verified against the specific cup sizes used on your site. For operations using cups outside this range, alternative models are available to suit narrower or wider rim diameters.

This dispenser is well suited to cafés, quick-service restaurants, staff canteens, and any beverage station where a clean counter and hygienic one-at-a-time cup presentation are priorities. For very high-volume sites with rapid cup turnover, it is worth considering a higher-capacity or multi-tube configuration.

If you are fitting out a beverage counter and want to confirm cup compatibility or counter cutout requirements before ordering, our team is happy to help you work through the details.

The San Jamar C2901 is a surface-mounted single cup dispenser cabinet designed for countertop beverage stations where cutting into the counter is not practical or permitted. It houses a single EZ-Fit cup dispenser and is intended for operations that need tidy, accessible cup dispensing at a fixed service point without a permanent in-counter installation.

In a working service environment, the cabinet keeps cups protected, upright, and dispensed one at a time, reducing the risk of cups being knocked over, contaminated by handling, or taken in multiples. The EZ-Fit dispenser uses interchangeable pre-cut gaskets, which means the same unit can be adjusted to suit different cup sizes across a wide range — covering most standard paper, plastic, and foam beverage cups from around 8oz through to 46oz. This makes it reasonably flexible for operations that occasionally change cup sizes or run different cups at different service points.

• One-at-a-time dispensing reduces cup contamination and waste
• Four interchangeable gaskets accommodate a wide range of cup sizes without replacing the dispenser
• Surface-mounted design suits counters where in-counter fitting is not possible
• Compatible with paper, plastic, and foam cups across most standard sizes
• Black polystyrene cabinet construction keeps cups enclosed and presentable at the point of service

Installation is straightforward — the cabinet is designed for countertop placement or surface mounting and does not require plumbing, electrical connection, or any specialist trade work. It is worth confirming the cup rim diameter against the gasket range before ordering, as the fit depends on selecting the correct gasket for the cup in use.

This cabinet is well suited to cafés, quick-service restaurants, staff canteens, healthcare catering, and similar settings where a single cup size or a small range of cup sizes is dispensed at a fixed point. For operations running multiple cup sizes across a busy service counter, a multi-position or higher-capacity cabinet configuration may be worth considering.

If you are unsure whether this unit suits your cup sizes or service setup, the team is happy to talk it through before you order.

This support bracket is a mounting accessory designed specifically for Bonzer cup dispensers. It attaches to the tube end of the dispenser to allow horizontal installation within a counter, keeping cups accessible at worktop level rather than positioned vertically above it. Two brackets are required per dispenser to complete a stable installation.

For operations where counter space is at a premium or where an under-counter or in-counter cup dispensing setup is preferred, this bracket provides the necessary support to hold the dispenser tube securely in a horizontal orientation. Without it, horizontal mounting is not recommended, as the tube end would be unsupported and liable to shift during use.

If you are fitting multiple Bonzer dispensers in a run or planning a built-in counter configuration, it is worth confirming your counter dimensions and dispenser tube length before ordering to ensure the bracket positions align correctly. If you are unsure whether this bracket suits your specific Bonzer dispenser model, our team are happy to help clarify compatibility before you order.

The San Jamar C2410C18 is an in-counter cup dispenser that sits flush within a counter cut-out, storing cups below the worktop and presenting them at the rim for clean, one-at-a-time dispensing. The 18-inch tube format suits a range of counter depths commonly found in cafeterias, staff canteens, quick-service restaurants and self-service beverage stations. It accepts paper, plastic and foam cups across a broad rim diameter range, which makes it a practical option where cup specifications vary or change periodically across service points.

The defining feature of this model is the EZ-Fit gasket system. Four interchangeable pre-cut gaskets are included, allowing the dispenser to be reconfigured for different cup sizes without replacing the unit. In working environments where cup suppliers change or beverage formats are updated, this avoids the cost and disruption of swapping out hardware each time. The impact-resistant plastic construction holds up well in counter environments where the occasional knock is inevitable.

Day-to-day operational advantages include:

• Flush counter installation keeps cups hygienic and the service area uncluttered
• One-cup dispensing at the rim reduces waste and spillage at the service point
• Interchangeable gaskets support a wide rim diameter range from a single unit
• Compatible with paper, plastic and foam cup formats
• Impact-resistant construction suits the demands of a working counter

Installation requires a counter with sufficient depth to accommodate the dispenser tube below the surface. The cut-out size should be confirmed against the unit before any counter work is carried out, and the counter material needs to be appropriate for the mounting hardware. For very high-throughput operations or unusually thick counter builds, it is worth checking that the tube length and cup capacity will comfortably meet peak service demand before committing.

This model is well suited to medium-volume operations that need flexibility across cup sizes without investing in multiple fixed dispensers. Sites with a dedicated, high-volume cup format and very fast service turnovers may find a purpose-built fixed-size dispenser offers better capacity for their specific needs.

If you want to confirm that the rim diameter range or tube length will work with your specific cups and counter, the team is glad to help you check compatibility before you go ahead.

The San Jamar C3450SS is a surface-mounted, gravity-fed cup dispenser constructed in stainless steel and designed to hold a generous quantity of large flat-bottom or cone water cups in the 82–98mm rim diameter range. It operates on a simple pull-type mechanism — one cup is dispensed at a time, keeping the remaining stack clean and contained. The flip cap closes over the top of the tube when not in use, preventing dust and airborne contamination from settling on stored cups.

In practice, this type of dispenser earns its place at water stations, self-serve beverage counters, and patient or visitor refreshment points where large cups are needed in volume. The stainless steel construction handles the wear of a busy service environment well and is straightforward to wipe down as part of a regular cleaning routine. The self-adjusting mechanism accommodates minor variation across cup brands within the compatible size range, which reduces the frustration of sourcing a single exact cup profile.

• Stainless steel construction resists corrosion and wipes clean easily
• Flip cap closes over the stack to keep cups hygienic between service periods
• Self-adjusting mechanism suits flat-bottom and cone cups in the 82–98mm range
• Mounting bracket allows secure fixing to coolers or flat wall surfaces
• Pull-type gravity feed dispenses one cup at a time, reducing waste and spillage

Installation is straightforward — the included mounting bracket fixes to a flat wall surface or the side of a water cooler without specialist tools. No electrical or water connections are required. The unit is surface-mounted rather than recessed, so wall depth is not a consideration, though you will need to allow adequate clearance in front of the dispenser for comfortable one-handed cup retrieval during a busy service.

This dispenser is well suited to cafeterias, healthcare refreshment stations, reception areas, and hospitality settings where large cups are used regularly. It is a single-column unit, so for very high-footfall locations requiring faster replenishment cycles, a multi-column or higher-capacity dispenser may be worth considering. If you are unsure whether this model is the right fit for your setup, our team is happy to talk it through with you.

The Bonzer Original Pull-Type Cup Dispenser is a wall-mounted stainless steel unit designed to hold and dispense small paper or foam cups in the 65–73mm diameter range — the size commonly used for water cooler stations, self-service beverage points, and front-of-house drink dispensing areas.

It operates on a simple pull-down mechanism that releases one cup at a time, keeping the stack hygienic and reducing the handling that comes with loose cup storage. The stainless steel gasket system holds the stack securely and accommodates the standard range of small disposable cups used across most commercial beverage setups.

For day-to-day operation, the practical advantages are straightforward:

• One-at-a-time dispensing reduces contamination from repeated cup handling
• Wall-mounted design keeps the cup supply off the counter and out of the way
• Stainless steel construction is easy to wipe down and suits food-safe environments
• Compatible with common 65–73mm paper and foam cup formats
• Simple mechanism with no moving parts to service or replace

Installation is straightforward — the unit is wall-mounted and requires only a suitable surface and fixings. There are no electrical or water connections involved. Positioning near a water cooler, juice dispenser, or self-service station makes the most practical sense. The unit suits kitchens, canteens, waiting areas, or any location where a tidy, hygienic cup point is needed.

This dispenser is well suited to low- to medium-volume cup usage — staff canteens, office catering setups, waiting rooms, or small café service points. For higher-volume sites dispensing larger cup formats, or where a countertop or in-counter configuration would better suit the layout, alternative options are worth considering.

If you're unsure whether this cup size or mounting style fits your setup, feel free to get in touch — it's a straightforward product but worth matching correctly to your cup stock before ordering.

The San Jamar C2410SM EZ-Fit is a surface-mounted cup dispenser designed for front-of-house beverage stations, self-service areas, and staff canteens. It dispenses paper, plastic, and foam cups one at a time and is built around an interchangeable gasket system that lets operators adjust the unit to suit different cup rim diameters — without replacing the dispenser itself.

In active service environments, one-at-a-time dispensing reduces the handling and contamination risk that comes with open cup storage. This matters particularly in healthcare, hospitality, and high-footfall catering settings where hygiene standards are a practical concern rather than an afterthought. The gasket system earns its value in operations where cup stock changes over time — whether due to seasonal menu changes, a switch in cup supplier, or moving between drink formats. Four gaskets are included, covering a wide range of cup sizes within the supported rim diameter range.

• Interchangeable gasket system adjusts to different cup rim diameters without replacing the unit
• Dispenses paper, plastic, and foam cups cleanly one at a time
• Impact-resistant construction handles the wear of busy front-of-house areas
• Surface-mount fitting keeps counters clear and integrates neatly into drink stations
• No power connection required — simple wall or surface installation

Fitting is straightforward and requires no electrical connection. Before ordering, it is worth confirming that your current cup stock falls within the supported rim diameter range, and that the intended mounting surface is suitable for the fixing method. Very high-volume sites dispensing at significant pace through a long service may find a higher-capacity model more appropriate.

This dispenser is well suited to cafés, canteens, hotel beverage stations, and healthcare environments where a hygienic, tidy cup presentation is required and where cup stock varies enough to make gasket flexibility genuinely useful. It is a practical, cost-effective solution for operators who want to avoid maintaining multiple dispensers across changing cup sizes.

If you are unsure whether the gasket sizing matches your existing cup stock, or want to talk through mounting options, the team is glad to help you confirm before you commit to an order.

The San Jamar C4400PF is a wall or cooler-mounted pull-type dispenser designed to hold foam beverage cups in the 12 to 24oz range. It operates on a gravity-fed, top-loading principle — cups are loaded from the top and dispensed one at a time by pulling from the base. The stainless steel tube construction gives it a clean, professional appearance that suits front-of-house and back-of-house environments alike.

In busy service settings, consistent cup dispensing matters more than it might seem. Having cups readily accessible without staff needing to handle a full sleeve reduces contact, speeds up service, and keeps the counter area tidier during peak periods. The self-adjusting mechanism accommodates the full 12 to 24oz foam cup range without requiring separate sizing rings, which simplifies restocking when cup sizes change between service periods or across different beverages.

• Self-adjusting fit across the full 12–24oz foam cup range without sizing rings
• Gravity-fed top-load design makes refilling quick and straightforward
• Removable flip cap protects stored cups from airborne contaminants
• High-impact stainless steel tube construction handles frequent daily use
• Mounts to most wall surfaces and cooler sides to free up counter space

Installation is straightforward — the unit attaches to most standard wall surfaces or cooler exteriors using the included mounting hardware. There are no electrical or plumbing requirements. It is worth confirming the rim diameter of your specific foam cups falls within the 82 to 98mm range before ordering, as foam cup dimensions can vary between manufacturers even within the same nominal fluid ounce size.

This dispenser is well suited to cafés, canteens, self-service counters, convenience-style beverage stations, and anywhere foam cups are dispensed at moderate to high volume. For very high-throughput sites dispensing multiple cup sizes simultaneously, a multi-sleeve or under-counter dispensing solution may be worth considering.

If you are unsure whether this model fits your cup stock or your counter setup, the team is happy to help you confirm compatibility before you order.

The San Jamar C2210SM is a wall-mounted cup dispenser designed for self-service and counter-service beverage stations. It dispenses cups one at a time from a protected stack, keeping them hygienic and accessible without cluttering the worktop. The unit accepts paper, plastic and foam cups across a 73–94mm rim diameter range, which covers a broad spread of standard cup formats commonly used in hospitality and catering.

The EZ-Fit system is the practical detail that separates this model from fixed-size dispensers. Four interchangeable pre-cut gaskets are included, allowing the same unit to be reconfigured for different cup sizes within the compatible range. For operations where cup format varies by drink type, or where supply chain changes occasionally mean switching brands, this removes the cost and inconvenience of buying an additional dispenser. Fitting a new gasket is straightforward and requires no tools.

In service, the dispenser suits steady-flow environments well — staff canteens, coffee stations, waiting areas and self-service counters where cups are needed consistently but volume is moderate rather than high. The impact-resistant plastic construction holds up reliably in busy service areas without requiring maintenance.

• EZ-Fit gasket system allows cup size changes without replacing the dispenser
• Single-cup dispensing keeps the stack hygienic and reduces casual waste
• Surface-mount design clears the counter for other equipment
• Compatible with paper, plastic and foam cups across a practical size range
• No power or water connection required — simple to fit and reposition

Installation requires only a suitable vertical surface. There are no electrical or water connections involved. Before ordering, it is worth confirming that your cup stock falls within the 73–94mm rim diameter range, as cups outside this tolerance will not dispense reliably.

This dispenser is well suited to low- to mid-volume sites. Operations with significantly higher throughput, or those needing a larger cup capacity in a single unit, may be better served by a higher-capacity model from the same range.

If you're fitting out a beverage station and want to talk through which dispenser configuration works for your cup stock and service setup, the team is glad to point you in the right direction.

The San Jamar C3165WH is a wall- or cooler-mounted pull-type cup dispenser designed for water stations in commercial and public-facing environments. It accepts a range of flat-bottom and cone water cups in the 64–83mm diameter range, dispensing one cup at a time via a simple pull mechanism that keeps remaining cups clean and contained.

In practice, this type of dispenser is commonly used alongside water coolers, self-service drink stations, and staff welfare points in kitchens, offices, healthcare settings, and hospitality back-of-house areas. The flip cap protects stored cups from airborne contamination and makes restocking straightforward without fully dismantling the unit. The transparent tube allows staff to check cup levels at a glance, reducing the chance of running dry during a busy period.

From an operational standpoint, the practical advantages are straightforward:

• Single-cup dispensing reduces waste and avoids cups being grabbed in multiples
• Flip cap keeps cups hygienic between restocks
• Clear tube body allows quick visual stock checks without opening the dispenser
• Mounting bracket suits flat surfaces and standard water cooler necks
• Self-adjusting mechanism accommodates both flat-bottom and cone cup styles

Installation is simple — the bracket mounts directly to a cooler or any flat vertical surface using the supplied fittings. No electrical or water connections are required. The unit is best positioned at an accessible height for the end user and within easy reach for restocking staff. It is suited to low-to-medium footfall locations; for high-volume sites dispensing large quantities throughout the day, a higher-capacity model may be worth considering.

This dispenser is well suited to small catering operations, staff welfare points, waiting areas, or any location where a neat, hygienic single-cup solution is needed without significant infrastructure. If you are equipping multiple stations or need guidance on cup compatibility, the team is happy to help before you order.

The San Jamar C2210C is an in-counter cup dispenser designed to sit flush within a cut-out in the counter surface, keeping cups accessible at self-serve drink stations, front-of-house service points, and staff canteen beverage areas without cluttering the worktop. It accepts paper, plastic, and foam cups with a rim diameter in the 73–94mm range and uses an elevator mechanism to present one cup at a time.

In fast-moving environments — cafés, quick-service restaurants, grab-and-go outlets, and canteens — this style of dispenser helps keep the drink station tidy and reduces the likelihood of customers handling multiple cups before taking one. The one-at-a-time feed is a straightforward hygiene and presentation benefit that pays off during busy service periods when drink points see heavy use.

A practical aspect of the EZ-Fit design is the set of interchangeable gaskets, which allow the unit to be adjusted to suit different cup sizes within the compatible range. This is useful where cup stock changes seasonally or where a site runs slightly different sizes across day parts without wanting to swap out the dispenser unit itself.

• Flush in-counter fit keeps cup stacks below the counter surface
• Interchangeable gaskets allow cup size adjustments without replacing the unit
• One-at-a-time elevator mechanism reduces handling at the drink point
• Compatible with paper, plastic, and foam cup formats in the 73–94mm rim range
• No electrical or water connections required

Installation requires a counter cut-out sized to the dispenser body. The unit is not suitable for surface mounting. It is worth confirming counter material and thickness before ordering — solid surface, stone, or tiled counters will typically need specialist cutting. There are no electrical or plumbing requirements, which keeps installation straightforward in most cases.

This dispenser is well suited to low- to mid-volume sites running one cup size or a narrow range of sizes. Operations dispensing a wider variety of cup formats simultaneously, or those with significantly higher throughput demands, may find a multi-position or larger-format setup more practical.

If you would like to talk through counter compatibility or cup size suitability before ordering, the team is happy to help.

The San Jamar C3200P is a pull-type cup dispenser designed to hold 6 to 10oz paper, plastic or foam beverage cups with a rim diameter in the 56–81mm range. The unit uses a patented self-adjusting collar to grip cups securely, so a single dispenser can accommodate a spread of cup sizes without manual reconfiguration — a practical advantage in operations where cup stock occasionally changes.

In a busy service environment, reliable cup dispensing is a small but meaningful part of workflow. A well-positioned dispenser reduces handling time, keeps cups clean and protected, and avoids the clutter of loose cup stacks on a counter. The C3200P's pull-type action delivers one cup at a time consistently, which helps maintain a tidy service point during peak periods.

• Self-adjusting collar accommodates a range of cup rim diameters without adjustment
• High-impact stainless steel tube construction for durability under frequent use
• Mounts horizontally, vertically or at 45 degrees to suit the available space
• Suitable for paper, plastic or foam cups in the 6–10oz range
• Wall or counter mounting frees up surface space at the service point

Installation is straightforward — the mounting ring locks onto most wall surfaces, cooler sides or countertops, and the flexible orientation options mean it can be fitted into awkward spaces or positioned for left- or right-handed access. There are no electrical or water connections required.

This dispenser is well suited to cafés, staff canteens, self-service beverage stations and front-of-house drink service points where a compact, practical cup holder is needed. For high-volume locations dispensing larger cups or requiring integrated cabinetry-mounted solutions, a higher-capacity dispenser may be more appropriate.

If you're unsure whether the cup sizes you use fall within the compatible range, our team are happy to help you confirm before you order.

The San Jamar C3260TBR is a wall- or cooler-mountable pull-type dispenser designed to hold and dispense large flat-bottom and cone water cups in the 70–86mm diameter range. It is a practical, single-function item built to keep cups hygienic, accessible, and consistently presented at a self-service or staff-service point.

In operational terms, this type of dispenser earns its place by removing the handling and contamination risks that come with stacking loose cups on a counter. Staff and customers take one cup at a time from the base, keeping the remaining stack covered and clean. The transparent tube makes it straightforward to judge when a refill is needed without removing the unit from the wall, which helps avoid service interruptions during busy periods.

Practical benefits in a commercial setting include:

• Flip cap keeps the cup stack protected from airborne contamination between refills
• Self-adjusting mechanism accommodates both flat-bottom and cone cup formats within the stated size range
• Transparent tube allows at-a-glance stock monitoring without removing the dispenser
• Mounting bracket suits flat surfaces and cooler units, giving some flexibility in positioning
• Pull-type dispensing reduces contact with the cup body, supporting basic hygiene standards

Installation is straightforward — the bracket fixes to any flat vertical surface or cooler housing, and no electrical or plumbing connection is required. The main practical consideration is confirming that the cups you intend to use fall within the 70–86mm diameter specification; cups outside this range will not dispense reliably. For higher-volume sites dispensing very large quantities of cups daily, a multi-bay or higher-capacity wall system may be worth considering.

This dispenser is well suited to cafés, canteens, healthcare waiting areas, gym facilities, and anywhere a water cooler or self-service beverage point is in regular use. It is a sensible choice where hygiene and tidy presentation matter but the requirement is modest in scale.

If you are unsure whether this model matches your cup format or station layout, the team is happy to help you confirm the right fit before you order.

The San Jamar C3400EF is a surface-mount foam cup dispenser designed to hold and dispense 12 to 24oz foam cups in a controlled, hygienic single-cup presentation. It is built from 26-gauge 304 stainless steel and intended for fixed installation in beverage service areas, whether that is a self-service station, a staffed counter, or an end-cap position.

In busy service environments, consistent cup dispensing matters more than it might seem. A poorly positioned or poorly sized dispenser leads to cups being grabbed in handfuls, contamination of the rim area, or cups jamming mid-service. The C3400EF addresses this with an adjustable collar that conforms to different cup diameters within the supported range, allowing the dispenser to be set correctly for the specific cup stock in use rather than relying on a one-size-fits-all fit.

The practical advantages of this unit include:

• Mounts horizontally, vertically or at a 45-degree angle to suit counter layout and access requirements
• Adjustable collar accommodates foam cup rim diameters across the 70-98mm range
• Stainless steel construction supports regular cleaning and resists corrosion in damp service areas
• Single-cup elevator dispensing reduces rim contamination and cup waste
• Suitable for under-counter, wall-mount or end-cap positions

Installation is straightforward, though it is worth noting that different spring sets are required depending on the mounting orientation chosen — horizontal, vertical and angled positions each use a different spring. This should be confirmed at the point of ordering if your installation position is already fixed. The unit is surface-mounted, so no internal cabinetry is needed, but the mounting surface must be stable enough to support the unit and a full column of cups without flex.

This dispenser is well suited to cafes, staff canteens, vending areas, hospitality back-bars and any site using foam cups in the 12-24oz range as their standard format. It is a single-sleeve unit, so sites with very high throughput or multiple cup sizes in simultaneous use may find a multi-sleeve or higher-capacity dispensing system more practical.

If you are unsure whether this unit suits your counter layout or cup specification, the team is happy to help you confirm the right fit before you order.

The San Jamar XC2226 is a replacement gasket kit designed specifically for San Jamar C2210 series cup dispensers. The kit contains four gaskets covering small, medium, large, and extra-large cup sizes, making it a practical stock item for any operation running C2210 dispensers across a range of cup formats.

In a busy front-of-house or beverage service environment, cup dispenser gaskets are a consumable component. Over time and with regular use, they can wear, distort, or lose their tension, causing cups to drop too freely or sit too tight — both of which slow down service and frustrate staff. Keeping a spare kit to hand means a worn gasket can be swapped out quickly without taking the dispenser out of service for longer than necessary.

The XC2226 kit is straightforward to fit and does not require tools or specialist knowledge. It is well suited to operations that run multiple C2210 dispensers, or where high throughput puts additional wear on components. Sites such as staff canteens, quick-service restaurants, cafeterias, and leisure facilities that rely on cup dispensers throughout the day will find this a sensible addition to their maintenance supplies.

It is worth confirming that your dispensers are C2210 models before ordering, as gasket kits are not universal across the San Jamar range. If you are unsure which gaskets are compatible with your existing dispensers, the team is happy to help you check before you order.

The San Jamar C5450C Sentry is an in-counter cup dispenser designed for front-of-house beverage stations, self-serve drink areas, and cafeteria counters where neat, hygienic cup presentation matters. It fits flush into a counter cutout and holds a column of cups in a protected tube, dispensing one cup at a time from the bottom. The unit is compatible with cups in the 79–114mm rim diameter range, which covers a broad spread of standard catering cups.

In busy service environments, the value of a well-designed cup dispenser is easy to underestimate. A poor dispenser jams, dispenses two at a time, or leaves cups exposed to the counter environment. The Sentry addresses these issues directly. The adjustable lever mechanism — San Jamar's Lifetime Lever system — is engineered to release a single cup cleanly without marring the rim or sides, which matters particularly where cups are going directly into customers' hands. Adjustment is possible even with the dispenser loaded, so staff do not need to empty it to recalibrate for a different cup batch.

From an operational standpoint, the practical advantages include:

• One-at-a-time dispensing reduces waste and prevents customers taking multiples
• Contamination Guard keeps the cup stack protected from airborne debris and counter spillage
• Food Safety Blue transparent tube allows a quick visual check of cup levels without opening the unit
• Trim ring finish integrates cleanly into counter surfaces and discourages customer interference with the mechanism
• Tool-free lever adjustment simplifies changeover when switching cup sizes

Installation requires a counter cutout sized to accept the 23.5-inch tube. It is worth confirming counter depth and material before ordering, as the unit sits proud of the underside and needs adequate clearance below. This dispenser suits lighter to moderate service volumes — higher-footfall sites running very large cup counts may benefit from a gravity-feed or higher-capacity model.

This model is well suited to cafés, hotel breakfast stations, staff canteens, and self-serve drink counters where a tidy, hygienic cup presentation is a priority. If you are fitting out multiple stations or are unsure which rim diameter range matches your current cup stock, it is worth having a conversation with us before ordering.

The San Jamar C2410C is an in-counter cup dispenser designed to sit flush within a counter cut-out, storing cups below the worktop and presenting them at the rim for clean, one-at-a-time dispensing. It accepts paper, plastic and foam cups across a broad rim diameter range, and the EZ-Fit name refers to a practical interchangeable gasket system — four pre-cut gaskets are included, allowing the unit to be reconfigured for different cup sizes without replacing the dispenser itself.

In a working beverage station, keeping cups stored below the counter makes a meaningful difference to surface organisation. Cups stay protected from airborne contamination and incidental contact, while remaining accessible to staff or self-serve customers without unnecessary handling. The impact-resistant construction holds up well in the repetitive, daily-use conditions of a commercial environment.

• Interchangeable gaskets allow cup size changes without replacing the unit
• Flush in-counter fit keeps the worktop clear and the service point tidy
• Compatible with paper, plastic and foam cup formats
• Single-handed dispensing reduces contact and supports hygiene at self-serve points
• Straightforward gasket changeover requires no specialist tools

Installation requires a counter cut-out sized to the dispenser's footprint. Before fitting, it is worth confirming counter thickness and material to ensure a clean, secure installation. The rim diameter range of 73 to 121mm suits most standard cup formats, but it is worth checking this against your current cup stock before ordering. For operations using cups outside this range, or where a higher-capacity tube is needed to reduce refill frequency, other configurations exist within the San Jamar range.

This dispenser is well suited to cafés, food-to-go counters, staff canteens, and self-service beverage stations where a clean, organised cup point matters. If you are setting up a new station or are unsure which dispenser configuration fits your cup format and counter setup, we are happy to talk it through with you.

The San Jamar C3400CF is a counter-mounted cup dispenser designed to hold and present 12 to 24oz cups at an angled position above the worktop. It is built for front-of-house beverage stations, self-service counters, and staffed service points where accessible, consistent cup dispensing is needed throughout the day. Construction is in 304 stainless steel, which holds up well in wet service environments and tolerates the cleaning routines typical of commercial counter use.

Where this model differs from simpler collar-style dispensers is the patented adjustable collar, which allows the unit to be set for different cup rim profiles without replacing any major components. Interchangeable springs let operators match dispensing tension to the cup material in use, which helps prevent jamming or double-dispensing during a busy service period — a common frustration with fixed-tension dispensers when cup stock changes between deliveries.

The main operational advantages are worth noting directly:

• Adjustable collar accommodates varying rim diameters across the 70–98mm range
• Interchangeable springs allow tension to be matched to cup weight and material
• Patented mounting ring fixes securely to the counter surface without under-counter support
• Angled orientation keeps cups within easy reach at the service point
• Stainless steel construction suits regular cleaning and damp counter environments

Installation requires no under-counter cavity. The mounting ring fixes to the counter surface and supports the dispenser tube above the worktop, which makes this a practical option where a fully recessed in-counter dispenser is not possible due to counter depth or construction. It is worth confirming cup compatibility before ordering, as not all cup profiles within the stated diameter range will dispense equally well with every spring combination.

This dispenser suits cafés, quick-service operations, canteens, and hospitality venues where a reliable, low-maintenance cup dispensing point is needed at counter level. For sites running very high cup volumes across multiple service points, a higher-capacity or in-counter alternative may be worth considering.

If you want to talk through cup compatibility or whether this unit suits your counter setup, the team is glad to help before you place an order.

The San Jamar Euro EZ-Fit is an in-counter cup dispenser designed to sit flush within a countertop cut-out, presenting cups at surface level for clean, one-at-a-time dispensing. It handles paper, plastic, and foam cups across a rim diameter range of 73–94mm, with interchangeable gaskets allowing operators to switch between cup sizes without replacing the unit itself.

In a café, bar, or quick-service counter environment, keeping the worktop clear is a genuine operational advantage. The in-counter format removes the dispenser from the working surface entirely, which reduces clutter and makes the counter easier to wipe down during service. One-at-a-time dispensing helps prevent double-pulls and the cup waste that tends to accumulate over a busy shift. Staff can retrieve a cup quickly without disturbing the stack, which keeps pace steady during peak periods.

• Accepts paper, plastic, and foam cups within the 73–94mm rim diameter range
• Interchangeable gaskets allow cup format changes without a new unit
• Flush in-counter installation removes the dispenser from the working surface
• One-at-a-time dispensing reduces double-pulls and cup waste
• Impact-resistant construction suited to regular front-of-house use

Installation requires a cut-out in the countertop to the correct diameter. Before ordering, it is worth confirming that your counter has sufficient depth below the surface to accommodate the dispenser body and a full cup stack. Counter thickness and the clearance available underneath are the two details most commonly overlooked at the point of purchase.

This model suits cafés, coffee shops, bars, and quick-service counters with moderate cup throughput and limited counter space. For very high-volume sites dispensing cups continuously throughout the day, a larger-capacity or higher-throughput unit may be a more appropriate fit.

If you would like to talk through whether this dispenser works with your counter setup or cup specification, the team is happy to help before you commit to an order.