San Jamar

The San Jamar C2410SM EZ-Fit is a surface-mounted cup dispenser designed for front-of-house beverage stations, self-service areas, and staff canteens. It dispenses paper, plastic, and foam cups one at a time and is built around an interchangeable gasket system that lets operators adjust the unit to suit different cup rim diameters — without replacing the dispenser itself.

In active service environments, one-at-a-time dispensing reduces the handling and contamination risk that comes with open cup storage. This matters particularly in healthcare, hospitality, and high-footfall catering settings where hygiene standards are a practical concern rather than an afterthought. The gasket system earns its value in operations where cup stock changes over time — whether due to seasonal menu changes, a switch in cup supplier, or moving between drink formats. Four gaskets are included, covering a wide range of cup sizes within the supported rim diameter range.

• Interchangeable gasket system adjusts to different cup rim diameters without replacing the unit
• Dispenses paper, plastic, and foam cups cleanly one at a time
• Impact-resistant construction handles the wear of busy front-of-house areas
• Surface-mount fitting keeps counters clear and integrates neatly into drink stations
• No power connection required — simple wall or surface installation

Fitting is straightforward and requires no electrical connection. Before ordering, it is worth confirming that your current cup stock falls within the supported rim diameter range, and that the intended mounting surface is suitable for the fixing method. Very high-volume sites dispensing at significant pace through a long service may find a higher-capacity model more appropriate.

This dispenser is well suited to cafés, canteens, hotel beverage stations, and healthcare environments where a hygienic, tidy cup presentation is required and where cup stock varies enough to make gasket flexibility genuinely useful. It is a practical, cost-effective solution for operators who want to avoid maintaining multiple dispensers across changing cup sizes.

If you are unsure whether the gasket sizing matches your existing cup stock, or want to talk through mounting options, the team is glad to help you confirm before you commit to an order.

The San Jamar C3400EV is a vertical, surface-mounted dispenser for cups in the 12 to 24oz (350 to 710ml) range, with rim diameters of 70 to 98mm. It mounts to a wall, under a counter or at the end of a beverage station, which frees up worktop space and keeps cups within reach at the point of use. The body is 304 stainless steel, which copes well with the damp, busy conditions around drinks stations.

Cups are presented one at a time, so staff and customers are less likely to pull out several at once. In a high-footfall operation that saves a surprising amount of waste. The adjustable collar can be set for different rim diameters within the supported range, so one unit suits a station that handles more than one cup size.

• Surface-mount design keeps counters clear and cups close to hand
• Adjustable collar fits cup rim diameters from 70 to 98mm
• 304 stainless steel construction wipes clean quickly and stands up to daily service
• One-at-a-time dispensing cuts down on over-grabbing and wasted cups
• No power or water connection needed, mounts with standard fixings

Check your cup rim diameter falls within 70 to 98mm before ordering, as the collar adjustment has limits. Mounting height matters too: whether staff or customers use the dispenser will affect where it sits most comfortably on the wall or counter end.

Suited to cafés, canteens, hotel beverage points and self-service areas serving hot or cold drinks. For much higher volumes, or where a recessed installation is needed, a different format may suit better.

If you'd like us to check your cup specification against this unit before you order, call 01304 827272 and we'll confirm the fit.

The San Jamar C3400EH is a horizontal surface-mounted cup dispenser designed to hold and dispense cups with rim diameters in the 70 to 98mm range, typically covering 12 to 24oz cups. It mounts flush to a counter surface or end-cap position, keeping a sleeve of cups protected, organised, and ready to pull without occupying the working surface above.

In practice, a well-positioned cup dispenser makes a noticeable difference to beverage station flow. Staff can retrieve a cup single-handed with a clean, consistent pull rather than lifting from a loose stack — a small efficiency that compounds quickly when queues build. The horizontal orientation keeps the unit low-profile, and the adjustable collar allows the dispenser to be set correctly for the cup in use rather than relying on a fixed-size fit.

• Adjustable collar sized for cups with rim diameters between 70 and 98mm
• Horizontal surface-mount format keeps cups at counter level without overhead reach
• Stainless steel construction handles the cleaning demands of a commercial environment
• Enclosed sleeve protects stacked cups from contamination between service periods
• Compatible with counter, wall, or end-cap mounting depending on station layout

Installation requires no cutting or recessing — the unit is surface-fixed, which makes it straightforward to position and reposition as layouts change. It is worth confirming your cup rim diameter before ordering; cups outside the 70 to 98mm working range will not dispense cleanly, and cup sizing does vary between suppliers. The unit is intended for dry counter environments and is not suited to wet or refrigerated applications.

This dispenser is well suited to cafés, fast-casual operations, self-service beverage counters, and staff canteens running a single cup size or a narrow range within the collar's working span. Operations that regularly switch between several cup sizes may find separate units per size, or a multi-sleeve dispenser, a more practical arrangement.

If you want to confirm the collar range works with your current cup supplier before committing, the team is glad to help you check.

The San Jamar C3200CV is an in-counter cup dispenser designed to hold and present 6 to 10oz cups at counter level through a fixed cut-out in the service surface. Rather than sitting on top of the counter, the unit sits within it, keeping cups accessible while leaving the work surface clear. It is constructed from 304 stainless steel, which holds up well to the regular cleaning and hygiene requirements of a commercial beverage station.

In practice, this type of dispenser is well suited to moderate-volume service points — staff canteens, café self-serve stations, water or juice counters, and similar environments where cups need to be within easy reach without cluttering the counter. The adjustable collar accommodates the rim diameter variation that exists across different cup brands, reducing the likelihood of cups dropping through or jamming mid-service. Spring selection allows the unit to be configured appropriately for either paper or polystyrene cups, which behave differently under spring tension and are worth considering when specifying.

• Adjustable collar reduces jamming and drop-through across different cup brands
• Spring options allow configuration for paper or polystyrene cup types
• Stainless steel construction supports daily cleaning and hygiene compliance
• In-counter position keeps cups accessible without occupying surface space
• Patented mounting ring locks securely into the counter cut-out

Installation requires a counter cut-out to the correct diameter, which should be confirmed against the dispenser specification before ordering — counters vary in material and thickness and it is worth checking compatibility first. The unit is not suitable for wall or overhead mounting; it is designed specifically for in-counter use. For higher-volume sites or operations dispensing larger cup formats, a higher-capacity model may be a more practical fit.

This dispenser is a practical choice for light to moderate service environments where a tidy, hygienic cup presentation is needed in a compact footprint. If you are unsure whether it suits your counter setup or cup range, we are happy to talk it through.

The San Jamar C3200CH is a horizontal counter-mount cup dispenser designed to hold and present 6 to 10oz cups at a fixed, accessible position on a beverage counter or service station. It mounts securely to the counter surface, keeps cups contained and hygienic, and delivers them one at a time through a spring-loaded mechanism. It is a straightforward, practical piece of equipment commonly found at café beverage counters, quick-service drink stations, and self-service points.

In a working service environment, having cups stored loose on a counter creates handling delays and hygiene risks. A mounted dispenser keeps the cup stack contained, presents each cup cleanly to staff or customers, and removes the fumbling that comes with grabbing from an open stack during a busy period. The adjustable collar on this model accommodates a range of cup rim diameters, which gives operators some flexibility if cup suppliers change or cup styles vary across the site.

• Adjustable collar fits different cup diameters within the supported range
• Spring-loaded delivery reduces double-dispensing during fast-paced service
• Counter-mount ring holds the unit firmly in place under repeated use
• Stainless steel construction is straightforward to clean and maintain
• Horizontal orientation suits counter runs where overhead clearance is limited

Installation requires no electrical connection or plumbing — the unit mounts directly to the counter surface. Before ordering, it is worth confirming that your cup rim diameter falls within the supported range and that a horizontal counter-mount orientation suits your counter layout. For environments with very high cup throughput or where an in-counter or wall-mounted configuration would work better, there are alternative mounting styles available.

This dispenser is well suited to cafés, beverage counters, canteens, and self-service areas handling moderate to steady cup volumes. If you are weighing up mounting options or want to confirm compatibility with your current cups, the team can help you work through it.

The San Jamar C3500CH is a horizontal counter-mount cup dispenser designed to handle large-format cups in the 32 to 46oz range, with rim diameters between 101 and 124mm. It mounts directly to the counter surface and presents cups horizontally, allowing staff or customers to draw a single cup cleanly without disturbing the remainder of the stack — a practical arrangement for any busy beverage service point.

In high-footfall environments, dispensing hygiene and speed matter equally. This unit keeps cups enclosed and protected from contact while remaining immediately accessible at point of service. The patented adjustable collar is a genuinely useful feature in operations where cup stock varies across suppliers or formats: rather than maintaining separate dispensers for each cup profile, the collar can be adjusted to suit the rim diameter in use, reducing the number of units required and saving time when stock changes. The locking mounting ring secures the dispenser to the counter without additional brackets, keeping the installation stable and tidy under constant use.

• Adjustable collar accommodates rim diameter variation without tool changes
• Locking mounting ring provides secure, self-supporting counter-level fitment
• Purpose-matched springs optimise the dispensing action for different cup types
• Stainless steel construction withstands daily use and regular cleaning regimes
• Horizontal cup presentation maintains hygiene and accessibility at point of service

Installation requires no electrical connection, plumbing, or ventilation. The unit mounts to the counter surface directly, so it is worth confirming that the counter material and thickness will accommodate the mounting ring securely before fitting. Cup stock should also be checked against the supported rim diameter range prior to ordering.

This dispenser is well suited to cafés, quick-service restaurants, staff canteens, and healthcare catering operations running a consistent volume of large-format cold or hot takeaway cups. Operations using smaller cup sizes, or requiring under-counter or in-counter configurations, will find alternative formats available within the San Jamar range.

If you would like to confirm compatibility with your current cup stock or discuss the best configuration for your service point, the team is glad to help before you commit to an order.

The San Jamar C3500CF is an in-counter cup dispenser designed to hold and dispense large-format cups with a rim diameter of 101 to 124mm. It mounts into a counter cut-out and presents cups at an angle, allowing staff to retrieve a single cup cleanly with one hand without breaking stride — a small but meaningful advantage during a busy service period.

Cup dispensing is one of those functional details that rarely gets attention until something goes wrong. A dispenser that allows cups to jam, drop, or nest badly creates friction at the point of service and slows throughput. The C3500CF uses a patented adjustable collar that conforms to the cup in use and a locking mounting ring that holds the unit securely within the counter without requiring additional support. Interchangeable springs allow the dispenser to be matched to different cup types, which helps maintain consistent feed even as cup stock varies between deliveries.

• Adjustable collar conforms to cup dimensions without tools
• Locking mounting ring provides a stable, self-supporting counter fit
• Angled presentation supports smooth one-handed retrieval at pace
• Interchangeable springs matched to cup type for consistent dispensing
• Stainless steel construction resists corrosion in wet service areas

Installation requires a counter cut-out of the correct diameter. This unit is designed solely for in-counter use and is not suitable for surface or wall mounting. It is a practical choice for self-service beverage counters, café service lines, fast-casual restaurants, and staff canteens where a fixed, tidy dispensing point is preferred over a loose cup stack.

This model works best where a single cup size in the 101 to 124mm rim range is used consistently. Operations dispensing several cup formats, or very high-volume venues cycling through large quantities of cups rapidly, may find a different configuration from the wider range more appropriate.

If you are working out which cup dispenser suits your counter layout or cup specification, we are happy to help you get that right before you order.

The San Jamar C3400CV is a vertical counter-mount cup dispenser designed for fixed beverage stations in front-of-house and back-of-house environments. It fits through a cut-out in the counter surface, holds a vertical stack of cups, and presents a single cup at a time for clean, one-handed dispensing. The adjustable collar accommodates cups in the 12 to 24oz range across a broad rim diameter span, making it a practical choice where cup stock occasionally varies between suppliers.

In a busy service environment, the value of a well-positioned cup dispenser is easy to underestimate. Cups stay enclosed and protected from dust and handling until drawn, staff and customers can take a single cup without disturbing the rest of the stack, and the counter-mount position keeps the service point tidy and the unit stable under repeated use. The adjustable collar also means the dispenser can adapt within the compatible size range without needing to be replaced when cup specifications change.

• Hygienic enclosed dispensing reduces contamination risk at the service point
• Single-cup delivery avoids fumbling and reduces cup waste during busy service
• Adjustable collar adapts to different cup profiles within the compatible range
• Stainless steel construction withstands regular cleaning without deteriorating
• Counter-mount fixing keeps the unit stable and the surface uncluttered

Installation requires a hole cut into the counter to accept the mounting ring. Once fitted, the unit locks in place and is self-supporting, making this a permanent or semi-permanent installation rather than a portable surface unit. It is well suited to fixed beverage points, not temporary or mobile setups. Before ordering, it is worth confirming that your cups fall within the 70 to 98mm rim diameter range, as cups outside this specification will not dispense reliably.

This dispenser works well in cafés, canteens, quick-service restaurants, and similar operations running a staffed or self-serve beverage station with consistent cup throughput. For sites dispensing very high volumes or using significantly larger cups, a higher-capacity format may be worth considering instead.

If you want to check that your current cup specification is compatible before committing, the team is glad to help you work it out.

The San Jamar C3400CH is a counter-mounted cup dispenser designed to hold and dispense 12 to 24oz cups in a horizontal orientation. It sits on or through a counter surface, keeping cups within easy reach at beverage service points without occupying open counter space. It is compatible with cups in the 70 to 98mm rim diameter range, which covers a broad range of standard paper and plastic cup sizes commonly used in cafés, self-service stations, and front-of-house catering environments.

The spring-loaded mechanism advances cups as each one is removed, delivering consistent single-cup dispensing without staff needing to handle the stack. In busier service periods this matters — fumbling with loose cups slows down the counter and undermines hygiene. Keeping the stack enclosed also limits dust exposure and incidental contact, which is a practical consideration at any front-of-house drinks point.

• Adjustable collar accommodates different cup profiles within the supported rim range
• Spring mechanism delivers clean, single-cup dispensing at pace
• Counter-mount installation keeps the drinks station tidy and cups consistently accessible
• Stainless steel construction withstands daily cleaning routines without deterioration
• Locking ring secures the unit firmly to the counter during busy service

Installation does not require specialist tools — the dispenser mounts to the counter surface and the locking ring holds it securely in place. Before ordering, it is worth confirming the rim diameter of your specific cups, as compatibility depends on this. The adjustable collar gives some flexibility within the stated range, but it will not bridge a significant mismatch. For operations running multiple beverage points at high volume, a wall-mounted or multi-tube arrangement may be worth considering instead.

This dispenser is well suited to small to medium cafés, hotel beverage counters, self-service drink stations, and catering setups where a tidy, accessible cup point is needed without a complex installation. If you are unsure whether it will work with your cup size or counter configuration, our team is happy to help you confirm before you order.

The San Jamar C3400CF is a counter-mounted cup dispenser designed to hold and present 12 to 24oz cups at an angled position above the worktop. It is built for front-of-house beverage stations, self-service counters, and staffed service points where accessible, consistent cup dispensing is needed throughout the day. Construction is in 304 stainless steel, which holds up well in wet service environments and tolerates the cleaning routines typical of commercial counter use.

Where this model differs from simpler collar-style dispensers is the patented adjustable collar, which allows the unit to be set for different cup rim profiles without replacing any major components. Interchangeable springs let operators match dispensing tension to the cup material in use, which helps prevent jamming or double-dispensing during a busy service period — a common frustration with fixed-tension dispensers when cup stock changes between deliveries.

The main operational advantages are worth noting directly:

• Adjustable collar accommodates varying rim diameters across the 70–98mm range
• Interchangeable springs allow tension to be matched to cup weight and material
• Patented mounting ring fixes securely to the counter surface without under-counter support
• Angled orientation keeps cups within easy reach at the service point
• Stainless steel construction suits regular cleaning and damp counter environments

Installation requires no under-counter cavity. The mounting ring fixes to the counter surface and supports the dispenser tube above the worktop, which makes this a practical option where a fully recessed in-counter dispenser is not possible due to counter depth or construction. It is worth confirming cup compatibility before ordering, as not all cup profiles within the stated diameter range will dispense equally well with every spring combination.

This dispenser suits cafés, quick-service operations, canteens, and hospitality venues where a reliable, low-maintenance cup dispensing point is needed at counter level. For sites running very high cup volumes across multiple service points, a higher-capacity or in-counter alternative may be worth considering.

If you want to talk through cup compatibility or whether this unit suits your counter setup, the team is glad to help before you place an order.

• Our Medium Pull-Type Water Cup Dispensers are designed with smart features and available in attractive colours and finishes to fit any application.
• These dispensers feature durable, transparent tubes for easy monitoring of cup levels.
• Flip cap keeps cups clean and allows for easy refilling.
• Self-adjusts to accommodate a wide range of medium flat-bottom and cone water cups.
• Mounting bracket will work on coolers or any flat surface.
• Durable impact-resistant plastic construction.
• Transparent tube to easily monitor cup levels.

• Our Medium Pull-Type Water Cup Dispensers are designed with smart features and available in attractive colours and finishes to fit any application.
• These dispensers feature durable, transparent tubes for easy monitoring of cup levels.
• Flip cap keeps cups clean and allows for easy refilling.
• Self-adjusts to accommodate a wide range of medium flat-bottom and cone water cups.
• Mounting bracket will work on coolers or any flat surface.
• Durable impact-resistant plastic construction.
• Transparent tube to easily monitor cup levels.

• Our Small Pull-Type Water Cup Dispensers are designed with smart features and available in attractive colours and finishes to fit any application.
• Plastic models feature durable, transparent tubes for easy monitoring of cup levels.
• Flip cap keeps cups clean and allows for easy refilling.
• Self-adjusts to accommodate a wide range of small flat-bottom and cone water cups.
• Mounting bracket will work on coolers or any flat surface.
• Durable plastic or stainless steel construction.
• Plastic units are transparent to easily monitor cup levels.
• Features white throat.

• Our Large Pull-Type Water Cup Dispensers are designed with smart features and available in attractive colours and finishes to fit any application.
• Plastic models feature durable, transparent tubes for easy monitoring of cup levels.
• Flip cap keeps cups clean and allows for easy refilling.
• Self-adjusts to accommodate a wide variety of large flat-bottom and cone water cups.
• Mounting bracket will work on coolers or any flat surface.
• Durable plastic or stainless steel construction.
• Plastic units are transparent to easily monitor cup levels.

• Our Large Pull-Type Water Cup Dispensers are designed with smart features and available in attractive colours and finishes to fit any application.
• Plastic models feature durable, transparent tubes for easy monitoring of cup levels.
• Flip cap keeps cups clean and allows for easy refilling.
• Self-adjusts to accommodate a wide variety of large flat-bottom and cone water cups.
• Mounting bracket will work on coolers or any flat surface.
• Durable plastic or stainless steel construction.
• Plastic units are transparent to easily monitor cup levels.

• Our Large Pull-Type Water Cup Dispensers are designed with smart features and available in attractive colours and finishes to fit any application.
• Plastic models feature durable, transparent tubes for easy monitoring of cup levels.
• Flip cap keeps cups clean and allows for easy refilling.
• Self-adjusts to accommodate a wide variety of large flat-bottom and cone water cups.
• Mounting bracket will work on coolers or any flat surface.
• Durable plastic or stainless steel construction.
• Plastic units are transparent to easily monitor cup levels.

The San Jamar C3450SS is a surface-mounted, gravity-fed cup dispenser constructed in stainless steel and designed to hold a generous quantity of large flat-bottom or cone water cups in the 82–98mm rim diameter range. It operates on a simple pull-type mechanism — one cup is dispensed at a time, keeping the remaining stack clean and contained. The flip cap closes over the top of the tube when not in use, preventing dust and airborne contamination from settling on stored cups.

In practice, this type of dispenser earns its place at water stations, self-serve beverage counters, and patient or visitor refreshment points where large cups are needed in volume. The stainless steel construction handles the wear of a busy service environment well and is straightforward to wipe down as part of a regular cleaning routine. The self-adjusting mechanism accommodates minor variation across cup brands within the compatible size range, which reduces the frustration of sourcing a single exact cup profile.

• Stainless steel construction resists corrosion and wipes clean easily
• Flip cap closes over the stack to keep cups hygienic between service periods
• Self-adjusting mechanism suits flat-bottom and cone cups in the 82–98mm range
• Mounting bracket allows secure fixing to coolers or flat wall surfaces
• Pull-type gravity feed dispenses one cup at a time, reducing waste and spillage

Installation is straightforward — the included mounting bracket fixes to a flat wall surface or the side of a water cooler without specialist tools. No electrical or water connections are required. The unit is surface-mounted rather than recessed, so wall depth is not a consideration, though you will need to allow adequate clearance in front of the dispenser for comfortable one-handed cup retrieval during a busy service.

This dispenser is well suited to cafeterias, healthcare refreshment stations, reception areas, and hospitality settings where large cups are used regularly. It is a single-column unit, so for very high-footfall locations requiring faster replenishment cycles, a multi-column or higher-capacity dispenser may be worth considering. If you are unsure whether this model is the right fit for your setup, our team is happy to talk it through with you.

The San Jamar C4410PFSD is a wall-mountable, pull-type foam cup dispenser designed to hold and dispense 12 to 24oz foam beverage cups in a controlled, hygienic way. It is a straightforward piece of front-of-house or beverage station kit — cups are loaded from the top and dispensed one at a time from the base, keeping the stack protected and the service point tidy.

In practice, this type of dispenser earns its place at self-serve drink stations, hot beverage counters, and cooler fronts where staff or customers need quick, single-cup access without handling the whole stack. The self-adjusting mechanism accommodates the common range of foam cup sizes without requiring separate sizing rings, which reduces the fuss of switching between cup formats if your supplier changes batch dimensions slightly.

From an operational standpoint, the main advantages are straightforward:

• Frees up counter space by moving cups off the worktop and onto the wall or cooler face
• Protects cups from dust and handling via the gravity-fed, top-loading design with a removable flip cap
• Eliminates sizing ring changes across standard foam cup sizes in the 12-24oz range
• High-impact plastic construction holds up to frequent daily use without cracking or warping

Installation is minimal — the unit attaches to most wall surfaces and cooler fronts without specialist tools or trades involvement. There are no electrical, water, or gas connections required. The main practical consideration is positioning: mount it at a height that suits your service flow, and ensure the cup size you use regularly falls within the supported rim diameter range before ordering.

This dispenser is well suited to cafés, canteens, convenience counters, and self-serve beverage stations handling moderate daily cup volumes. For very high-throughput sites dispensing several hundred cups per session, a higher-capacity model or a countertop unit may be worth considering.

If you are unsure whether this unit suits your cup format or station layout, our team are happy to help you confirm the right fit before you order.

The San Jamar C4200PF is a wall-mounted, pull-type cup dispenser constructed from high-impact stainless steel and designed to hold foam beverage cups in the 4 to 10oz range. It is a straightforward piece of front-of-house or self-service kit — cups are loaded from the top and dispensed individually by pulling from the base, keeping the stack clean and accessible throughout service.

In a busy café, canteen, or beverage station, this type of dispenser earns its place by keeping cups organised, hygienic, and within easy reach without occupying counter space. The self-adjusting mechanism accommodates the range of foam cup sizes without requiring separate sizing rings, which is useful where a site uses more than one cup format across hot and cold drinks. The stainless steel construction is durable enough for frequent daily use and straightforward to wipe down as part of a routine hygiene check.

• Top-loading gravity-fed design with protective cap keeps cups clean between refills
• Self-adjusting sleeve fits foam cups across the 4–10oz range without adaptors
• Wall or cooler-mounted to free up counter space at busy service points
• Stainless steel tube resists impact and cleans down easily
• Removable cap allows quick, hygienic refilling during service

Installation is straightforward — the unit fixes to most wall surfaces or cooler sides using standard fixings, making it suitable for countertop beverage stations, self-service areas, or staff refreshment points. No electrical or plumbing connections are required. It is worth confirming that your foam cup stock falls within the 70–85mm rim diameter range before purchasing, as the dispenser is sized for that profile.

This dispenser suits cafés, canteens, healthcare catering, convenience stores, and any site running a self-service hot or cold drinks station with moderate to high cup throughput. If you're fitting out a larger or higher-volume station and need to consider multiple dispensers or a different mounting configuration, the team are happy to help you work out what suits the space.

The San Jamar C4400PF is a wall or cooler-mounted pull-type dispenser designed to hold foam beverage cups in the 12 to 24oz range. It operates on a gravity-fed, top-loading principle — cups are loaded from the top and dispensed one at a time by pulling from the base. The stainless steel tube construction gives it a clean, professional appearance that suits front-of-house and back-of-house environments alike.

In busy service settings, consistent cup dispensing matters more than it might seem. Having cups readily accessible without staff needing to handle a full sleeve reduces contact, speeds up service, and keeps the counter area tidier during peak periods. The self-adjusting mechanism accommodates the full 12 to 24oz foam cup range without requiring separate sizing rings, which simplifies restocking when cup sizes change between service periods or across different beverages.

• Self-adjusting fit across the full 12–24oz foam cup range without sizing rings
• Gravity-fed top-load design makes refilling quick and straightforward
• Removable flip cap protects stored cups from airborne contaminants
• High-impact stainless steel tube construction handles frequent daily use
• Mounts to most wall surfaces and cooler sides to free up counter space

Installation is straightforward — the unit attaches to most standard wall surfaces or cooler exteriors using the included mounting hardware. There are no electrical or plumbing requirements. It is worth confirming the rim diameter of your specific foam cups falls within the 82 to 98mm range before ordering, as foam cup dimensions can vary between manufacturers even within the same nominal fluid ounce size.

This dispenser is well suited to cafés, canteens, self-service counters, convenience-style beverage stations, and anywhere foam cups are dispensed at moderate to high volume. For very high-throughput sites dispensing multiple cup sizes simultaneously, a multi-sleeve or under-counter dispensing solution may be worth considering.

If you are unsure whether this model fits your cup stock or your counter setup, the team is happy to help you confirm compatibility before you order.

The San Jamar C4500PF is a surface-mounted, pull-type dispenser designed to hold large-format foam beverage cups in the 32 to 46oz range. Cups are top-loaded into a stainless steel tube and dispensed one at a time from the base — a gravity-fed mechanism that is straightforward to operate and easy to restock mid-service without interrupting the flow of a busy counter.

The self-adjusting sleeve is a practical detail worth noting. Foam cups can vary slightly in diameter between batches and suppliers, and the sleeve accommodates that variation without needing separate sizing rings or adjustment. For sites that refill dispensers frequently or source cups from more than one supplier, this removes a small but genuine operational inconvenience. The stainless steel tube construction handles the repeated handling and incidental knocks typical of high-footfall service points, and the removable flip cap keeps the cup stack protected from dust and airborne contaminants between refills.

• Self-adjusting sleeve fits foam cup batches without additional parts or tools
• Pull-type dispensing limits cup contact, supporting front-of-house hygiene
• Top-loading design allows fast restocking without removing the unit
• Mounts to wall surfaces or upright cooler panels to free up counter space
• Stainless steel tube withstands regular handling in busy service environments

Fitting is uncomplicated — the unit mounts to most standard wall surfaces or cooler uprights using the supplied hardware, with no electrical or plumbing connections required. Before ordering, it is worth confirming that your cup stock falls within the supported rim diameter range, as foam cup dimensions can vary between manufacturers.

This dispenser is a practical choice for fast food outlets, convenience stores, cinema and leisure concessions, self-service canteens, and anywhere large cold drink cups are in consistent, high-volume use. Sites dispensing smaller cup formats, or those needing a countertop rather than wall-mounted configuration, will find alternative options within the wider range.

If you want to confirm compatibility with your existing cup stock before placing an order, the team is glad to help you work through that.

San Jamar XC2226 Spare Gasket Kit with 1 x S/M/L & XL Gasket - For C2210 Dispensers

The San Jamar L2200C is an in-counter lid dispenser designed to sit flush within a beverage counter surface, dispensing cold-drink lids one at a time through an EZ-Fit mechanism. It is intended for operations where lids are handed out at point of service — coffee shops, quick-service restaurants, cafeterias, and similar high-footfall beverage stations. The dispenser accommodates a range of cold-beverage lid sizes within the 70–95mm diameter bracket, removing the need to swap out units when lid sizing varies across a menu.

In a busy service environment, loose lid stacks are a persistent hygiene and waste problem. The L2200C addresses this directly by keeping the lid supply enclosed within the counter, away from handling, spillage, and airborne contamination. The front-loading design allows staff to reload one-handed without disrupting the service line, which matters during peak periods when counter space and attention are both limited.

• One-at-a-time dispensing reduces lid waste and accidental contamination
• Front-loading reload requires one hand, keeping service flowing during busy periods
• Enclosed tube design protects lid stock from counter spillage and handling
• High-impact plastic construction resists cracking under daily commercial use
• No adjustment mechanism — minimal moving parts means less to go wrong

Installation requires a counter cut-out of 124mm diameter and sufficient counter depth to accommodate the tube below the surface. It is worth confirming counter thickness and underside clearance before ordering, as the tube length determines how much depth is needed beneath the worktop. The unit is not suitable for hot-drink lids or for surface mounting — it is designed specifically for flush in-counter installation.

This dispenser is well suited to cafés, canteens, and quick-service operations running cold-drink programmes with consistent lid sizing in the 70–95mm range. For operations dispensing multiple lid sizes across a wider diameter range, or running very high volumes, it is worth considering whether a multi-aperture or higher-capacity solution would be more practical.

If you are unsure whether this unit fits your counter specification or lid range, the team is happy to talk it through before you commit to an order.

The San Jamar L2400C is an in-counter lid dispenser designed to hold and dispense cold beverage lids within the 95–114mm size range. It fits flush into a countertop cutout, keeping lids accessible at the point of service without cluttering the counter surface. The unit uses San Jamar's EZ-Fit dispensing mechanism, which allows one-at-a-time lid removal across several compatible lid sizes without swapping out the dispenser.

In fast-moving service environments — cafés, quick-service counters, sports venues, and hospitality operations — lid dispensers of this type earn their place by keeping the service line tidy and reducing the handling that comes with loose lid stacks. Because lids are loaded from the front with one hand and dispensed individually, there is less risk of contamination from handling multiple lids to retrieve one, and less waste from lids being knocked over or dropped.

Practical advantages for counter staff include:

• One-at-a-time dispensing reduces lid waste and handling time at the point of service
• Front-loading design allows quick restocking without clearing the counter
• Flush in-counter fit keeps the service surface clear and organised
• High-impact plastic construction resists the knocks typical of a busy service environment
• Simple mechanism with few moving parts means minimal maintenance demands

Installation requires a countertop cutout of 146mm diameter, and the tube extends 603mm below the counter surface — so adequate clearance beneath the counter is needed before fitting. The unit is suited to solid countertops of an appropriate thickness; it is worth confirming your counter depth and under-counter clearance before ordering.

This dispenser is well suited to cafés, coffee shops, fast-food counters, and catering operations serving cold beverages in cups that take lids in the 95–114mm range. It is a single-size-range unit, so operations serving a wide variety of cup sizes may need additional dispensers to cover other lid diameters.

If you are unsure whether this unit suits your counter setup or lid range, we are happy to help you work through the options.

The San Jamar C2901 is a surface-mounted single cup dispenser cabinet designed for countertop beverage stations where cutting into the counter is not practical or permitted. It houses a single EZ-Fit cup dispenser and is intended for operations that need tidy, accessible cup dispensing at a fixed service point without a permanent in-counter installation.

In a working service environment, the cabinet keeps cups protected, upright, and dispensed one at a time, reducing the risk of cups being knocked over, contaminated by handling, or taken in multiples. The EZ-Fit dispenser uses interchangeable pre-cut gaskets, which means the same unit can be adjusted to suit different cup sizes across a wide range — covering most standard paper, plastic, and foam beverage cups from around 8oz through to 46oz. This makes it reasonably flexible for operations that occasionally change cup sizes or run different cups at different service points.

• One-at-a-time dispensing reduces cup contamination and waste
• Four interchangeable gaskets accommodate a wide range of cup sizes without replacing the dispenser
• Surface-mounted design suits counters where in-counter fitting is not possible
• Compatible with paper, plastic, and foam cups across most standard sizes
• Black polystyrene cabinet construction keeps cups enclosed and presentable at the point of service

Installation is straightforward — the cabinet is designed for countertop placement or surface mounting and does not require plumbing, electrical connection, or any specialist trade work. It is worth confirming the cup rim diameter against the gasket range before ordering, as the fit depends on selecting the correct gasket for the cup in use.

This cabinet is well suited to cafés, quick-service restaurants, staff canteens, healthcare catering, and similar settings where a single cup size or a small range of cup sizes is dispensed at a fixed point. For operations running multiple cup sizes across a busy service counter, a multi-position or higher-capacity cabinet configuration may be worth considering.

If you are unsure whether this unit suits your cup sizes or service setup, the team is happy to talk it through before you order.

The San Jamar C3200EF is a surface-mount foam cup dispenser designed to accept 6 to 10oz foam cups with rim diameters in the 56–81mm range. It dispenses one cup at a time via an elevator mechanism, presenting the next cup cleanly at the opening and keeping the remainder protected within the tube. The unit is constructed from 26-gauge 304 stainless steel, giving it the durability expected in a busy front-of-house or self-service environment.

Where this dispenser earns its place is in speed-of-service situations — hot drink stations, self-serve beverage counters, waiting areas, and staff refreshment points — where staff or customers need to retrieve a cup cleanly and quickly without handling the stack below. The adjustable collar accommodates different cup sizes within the supported range, so operators do not need a separate dispenser for every cup specification they run.

A practical feature is the mounting flexibility. The C3200EF can be installed horizontally, vertically, or at a 45° angle, with the appropriate spring supplied for each orientation. This makes it adaptable to under-counter, wall, or end-panel positions — useful where counter space is limited or where a clean, built-in look is preferred. Key operational benefits include:

• Single-cup dispensing keeps the remaining stack hygienic and untouched
• Adjustable collar adapts to cup sizes within the supported range
• Three mounting orientations give installation flexibility in tight spaces
• Stainless steel construction is straightforward to wipe down and maintain

Installation requires only a flat surface or panel suitable for the fixing method chosen. No plumbing, electrical connection, or ventilation is needed. It is worth confirming your cup rim diameter against the 56–81mm specification before ordering, as the dispenser is designed for foam cups only and will not function correctly with paper or plastic alternatives.

This dispenser is well suited to cafés, canteens, hospital refreshment points, office kitchens, and any self-serve station running foam cups in the 6–10oz range. For sites dispensing larger cup formats or requiring a countertop-mounted or undercounter recessed solution, other configurations in the San Jamar range may be more appropriate.

If you are fitting out a beverage station and want to make sure the dispenser suits your cup specification and installation position, the team is happy to talk it through before you order.

The San Jamar C3400EF is a surface-mount foam cup dispenser designed to hold and dispense 12 to 24oz foam cups in a controlled, hygienic single-cup presentation. It is built from 26-gauge 304 stainless steel and intended for fixed installation in beverage service areas, whether that is a self-service station, a staffed counter, or an end-cap position.

In busy service environments, consistent cup dispensing matters more than it might seem. A poorly positioned or poorly sized dispenser leads to cups being grabbed in handfuls, contamination of the rim area, or cups jamming mid-service. The C3400EF addresses this with an adjustable collar that conforms to different cup diameters within the supported range, allowing the dispenser to be set correctly for the specific cup stock in use rather than relying on a one-size-fits-all fit.

The practical advantages of this unit include:

• Mounts horizontally, vertically or at a 45-degree angle to suit counter layout and access requirements
• Adjustable collar accommodates foam cup rim diameters across the 70-98mm range
• Stainless steel construction supports regular cleaning and resists corrosion in damp service areas
• Single-cup elevator dispensing reduces rim contamination and cup waste
• Suitable for under-counter, wall-mount or end-cap positions

Installation is straightforward, though it is worth noting that different spring sets are required depending on the mounting orientation chosen — horizontal, vertical and angled positions each use a different spring. This should be confirmed at the point of ordering if your installation position is already fixed. The unit is surface-mounted, so no internal cabinetry is needed, but the mounting surface must be stable enough to support the unit and a full column of cups without flex.

This dispenser is well suited to cafes, staff canteens, vending areas, hospitality back-bars and any site using foam cups in the 12-24oz range as their standard format. It is a single-sleeve unit, so sites with very high throughput or multiple cup sizes in simultaneous use may find a multi-sleeve or higher-capacity dispensing system more practical.

If you are unsure whether this unit suits your counter layout or cup specification, the team is happy to help you confirm the right fit before you order.

The San Jamar C3200EV is a vertical, surface-mounted dispenser for cups in the 6 to 10oz (180 to 300ml) range, with rim diameters of 56 to 81mm. It is built for fixed installation at beverage stations, self-service areas or behind counters, wherever you want cups presented cleanly and consistently through service. The body is 304 stainless steel, which stands up to regular cleaning and wipe-downs.

It suits moderate-volume sites where cups are drawn steadily rather than in rapid bursts. The adjustable collar is the key part: it is set to the rim diameter of the cup you use, which reduces the chance of several cups coming out at once or jamming. It is worth taking time to set the collar correctly for your cup stock during installation.

• Keeps cups enclosed and protected from handling contamination
• Frees up counter space compared with open cup stacking
• Single-cup dispensing reduces waste during busy service
• 304 stainless steel construction wipes clean quickly
• Vertical mounting keeps the footprint compact at the point of use

Fit it to a flat surface or wall with enough clearance to load cups from below. The dispenser is fixed in place, so choose a mounting position with refilling in mind, as an awkward location makes restocking slower than it needs to be. Check that your cup rim diameter falls within 56 to 81mm before ordering.

Suited to cafés, staff canteens, waiting areas and self-service beverage stations with moderate throughput. For higher-volume sites, larger cup formats, or where a freestanding or countertop unit is needed, another configuration may suit better.

If you are unsure whether this model fits your cups or setup, call 01304 827272 and we will help you work through the options.

The San Jamar L2410 is an in-counter lid dispenser designed for hot drink lids in the 95–101mm size range. It mounts flush into a counter surface and presents lids one at a time through a rubber gasket mechanism, so customers or staff only contact the leading edge of the lid rather than the stack as a whole. It is part of San Jamar's EZ-Fit range, which uses interchangeable gaskets to accommodate different lid profiles within a compatible size bracket.

In busy beverage service environments — coffee shops, quick service restaurants, food courts, and staff canteens — loose lid stacks on counters create hygiene risks and waste through contamination and spillage. An in-counter dispenser addresses both issues by keeping the bulk of the lid stack below the counter surface and controlling access to a single lid at a time. The result is a tidier service point and fewer discarded lids during a busy service period.

• One-at-a-time dispensing limits contact with the lid stack
• In-counter mount keeps the counter surface clear and organised
• Interchangeable rubber gaskets suit a range of lid profiles in the compatible size range
• Reduces lid waste caused by contamination or knocked stacks
• Can be oriented horizontally or vertically to suit counter layout

Installation requires a cutout in the counter surface. The orientation flexibility — horizontal or vertical — gives some adaptability to different counter configurations, but it is worth confirming counter depth and material before fitting. This unit is sized for 95–101mm lids; if your operation uses smaller or larger lid diameters, San Jamar produce equivalent dispensers in other size ranges.

The L2410 is well suited to any fixed beverage service point with moderate to high throughput where hygiene standards and counter tidiness matter. It is a practical choice for coffee service counters, self-serve beverage stations, and staff dining facilities. For very high-volume sites running multiple lid sizes simultaneously, it is worth considering whether a multi-unit installation or a different format would better suit the flow of service.

If you are unsure whether this unit fits your counter setup or lid specification, the team is happy to help you confirm compatibility before you order.