Restaurant Equipment Accessories

The Cinders Flat Griddle is a cooking-grade aluminium plate designed to sit directly over the grill bars of compatible Cinders SG80 and TG160 BBQ units. It converts the open grill into a flat-top cooking surface, broadening what the unit can do without requiring additional equipment on site.

In practice, this kind of accessory earns its place quickly on busy outdoor catering operations. An open grill is inherently limited in what it can hold and how it transfers heat — a flat griddle changes that significantly. It handles fried onions, peppers, and other garnishes that need to stay warm and ready throughout service, manages batches of pancakes or breakfast items, and copes well with stir-fried vegetables at pace. The lipped edges contain food and cooking juices, which matters when working fast in an outdoor or event environment where mess quickly becomes a practical problem.

On TG160 models, the griddle slides side-to-side across the cooking surface, and the reflected heat assists with cleaning the grill bars beneath as it moves — a useful detail that reduces time spent on maintenance between services.

• Converts open grill bars to a flat cooking surface without extra equipment
• Lipped edges contain food and juices during fast-paced outdoor service
• Sliding action on TG160 models helps clean the grill surface beneath
• Thick aluminium plate distributes and retains heat evenly across the cooking area
• Broadens the menu range achievable from a single Cinders BBQ unit

This griddle is designed specifically for Cinders SG80 and TG160 models and is not a universal fit across other manufacturers' equipment. For sites with consistently high throughput, it is worth considering whether a dedicated commercial flat-top griddle or a larger-capacity unit would be a better match for the volume involved.

If you are unsure whether this plate suits your current setup or the type of events you cater for, the team is happy to talk it through before you commit.

This is the manufacturer-produced cover made specifically for the Cinders TG160 gas barbecue. It is not a universal fit — it is cut and shaped to the TG160's dimensions, so it sits cleanly over the unit without excess bunching or poor drape. Clip fastenings at the base hold it securely in place, which matters in the kind of exposed outdoor settings where the TG160 is commonly used.

Outdoor catering equipment tends to deteriorate faster than operators expect when left uncovered between services. Grease residue attracts debris, moisture works into burner components over time, and cooking surfaces become progressively harder to clean. A properly fitted cover reduces that exposure, helping to keep the unit in good working condition through a full outdoor season and cutting the preparation time needed before each service.

• Purpose-fitted for the TG160 — no bunching or poor drape
• Clip fastenings hold securely in exposed or elevated outdoor positions
• Weather-resistant fabric reduces moisture and debris accumulation
• Helps maintain the unit's condition and cleanliness between services
• Presents neatly in front-of-house settings where equipment is visible to guests

This cover is made for the TG160 only and will not fit other Cinders models correctly. Cinders produce model-specific covers across their range, so if you are running a different unit it is worth confirming the right cover before ordering — fitting an incorrect cover risks poor weather protection and potential damage to the cover itself.

If you are unsure which accessories are the right match for your Cinders setup, the team is happy to confirm compatibility before you place an order.

The Blue Seal E27FT is a 600 x 400mm oven tray designed for use with compatible Blue Seal equipment. If you are looking to confirm compatibility with a specific oven or stand, or need guidance on which tray suits your current setup, our team is happy to help before you order.

This is Rational's own-brand liquid descaler, developed specifically for use with CombiMaster and ClimaPlus Combi ovens. It is designed to remove limescale build-up from the oven's water system and steam generation components — the kind of build-up that, if left unchecked, gradually undermines cooking performance and shortens equipment lifespan.

In hard and medium-hard water areas, scale accumulation is one of the most common causes of reduced steam output and inconsistent cooking results in combi ovens. Regular descaling with the correct product helps keep the steam generator and internal water pathways clear, maintaining the cooking conditions the oven was calibrated to deliver.

Using Rational's own descaler rather than a generic alternative is worth considering. Rational's combi ovens are precision pieces of equipment with specific material tolerances, and the manufacturer's own chemistry is formulated to be compatible with those components. Using non-approved products can, in some cases, affect internal parts or void servicing arrangements.

• Formulated specifically for Rational combi oven water systems
• Helps maintain steam output and cooking consistency
• Supports compliance with Rational's recommended maintenance programme
• Suitable for use in hard and medium-hard water areas
• Part of a complete Rational chemical care range

How frequently you descale will depend on your local water hardness and how heavily the oven is used. Kitchens in hard water regions running the oven through multiple service periods daily will typically need to descale more often than lighter-use sites.

If you're unsure about the correct descaling frequency for your site, or whether your water hardness warrants additional water treatment measures, the team is happy to advise.

The BC48 is a purpose-made cover designed specifically for the Crown Verity MCB48 mobile charbroiler. Its function is straightforward: to protect the unit when it is not in service, shielding the burners, cooking surfaces, and frame from dust, moisture, and general weather exposure.

For operators running outdoor catering events, seasonal service periods, or a permanent outdoor cooking station, leaving a commercial barbecue uncovered between uses takes a gradual toll. Debris settles on cooking surfaces, moisture works into components, and the finish deteriorates faster than it needs to. A correctly fitted cover reduces that wear, keeps the unit cleaner going into each service, and cuts down the preparation time before the grill is needed.

• Tailored fit for the MCB48 — no adapting an ill-fitting generic cover
• Shields burners and cooking surfaces from debris and moisture during storage
• Reduces pre-service cleaning time and preparation effort
• Helps maintain the unit's appearance and condition over its working life
• Quick to fit and remove when turnaround between events is tight

It is worth being clear that this cover is model-specific. It is made for the MCB48 and will not fit other Crown Verity units correctly. If you are running a different model in the range, it is worth checking with us before ordering.

If you are putting together a full Crown Verity outdoor setup or simply want to confirm you have the right accessories for your unit, we are happy to talk it through.

These 100mm castors are a Parry accessory designed to add mobility to compatible fabricated tables. Supplied as a set with two lockable wheels, they allow a table to be repositioned when needed whilst remaining securely fixed in place during service. The 100mm height is matched to keep the working surface at standard table height, so fitting them does not require any adjustment to the table's operational setup.

In a busy kitchen environment, being able to reposition equipment quickly — for deep cleaning, reconfiguring a section, or accommodating a temporary layout change — is a practical advantage. The locking castors ensure the table stays put once it's where you need it, which matters in a service environment where stability is expected as standard.

• Two castors lockable for stability during service
• Matched height maintains standard table working surface level
• Enables repositioning for cleaning or layout adjustments
• Suitable for compatible Parry fabricated tables

Before ordering, it's worth confirming compatibility with your specific table model. Castor fittings vary between fabricated units, and what works on one table may not suit another. If you're unsure which castors are correct for your table, or whether these are the right fit for your setup, our team is happy to help you check before you order.

This is the manufacturer-matched open stand designed specifically for use with the Rational iCombi 6-1 and 10-1 combi ovens. It provides a stable, purpose-built base that positions the oven at a practical working height, giving kitchen staff comfortable access to the door, cavity, and control panel throughout service.

In a working kitchen, oven height has a direct effect on how efficiently staff can load and unload during a busy service. A correctly positioned unit reduces operator fatigue, speeds up turnaround between batches, and lowers the risk of accidents when handling hot gastronorm trays under pressure. Using the Rational-matched stand also means the oven is supported exactly as the manufacturer intends, which matters both for safe day-to-day operation and for maintaining warranty compliance.

Practical benefits of using the correct Rational stand include:

• Oven positioned at an ergonomic working height, reducing strain during loading and unloading
• Purpose-matched base designed for the specific footprint of iCombi 6-1 and 10-1 units
• Open frame design allows usable storage access beneath the oven
• Supports correct door clearance and ventilation as specified by Rational
• Manufacturer-matched fitting avoids improvised solutions that may affect stability or compliance

Before installation, confirm that the floor is level and capable of bearing the combined weight of the stand and a fully loaded oven. The open frame suits kitchens where under-oven storage is useful, though if a fully enclosed cabinet base is preferred, alternative base options are available within the Rational range. Ensure the installation maintains the clearances specified in Rational's own guidelines.

This stand is well suited to any operation running a Rational iCombi 6-1 or 10-1 as a standalone or countertop unit and requiring a compliant, stable base. It is a straightforward purchase, but choosing the wrong base can create real operational and compliance problems, so it is worth getting right from the outset.

If you are configuring a full Rational installation or are weighing up base options for your kitchen layout, we are happy to talk it through before you place an order.

The Crown Verity RFS60 is a removable front shelf designed specifically to fit the MCB60 series barbecue. It attaches directly to the front of the unit, giving operators a dedicated surface for resting platters, holding condiments, or staging plated food during service — without requiring a separate table alongside the grill.

In a busy outdoor catering or events environment, having the right surfaces exactly where they are needed matters. Rather than reaching back to a separate prep area while managing a full grill load, operators can keep what they need within arm's reach. It is a modest addition, but one that tends to make a practical difference to workflow pace during peak service periods.

The shelf detaches cleanly, which makes post-service breakdown and cleaning straightforward. For mobile caterers and event operators who move equipment regularly, the ability to remove it quickly is a genuine convenience rather than an afterthought.

• Keeps the immediate cook's station organised during service
• Reduces unnecessary movement away from the grill at peak times
• Removable for easy cleaning and transport
• Fits directly to the MCB60 without additional tooling

It is worth noting that this shelf is designed specifically for the MCB60 and is not a universal fit across other Crown Verity models. If you are running a different configuration or are unsure about compatibility with your specific unit, it is worth checking before ordering.

If you would like to talk through which accessories are right for your setup, the team is happy to help.

The Lincat OA8924 is a genuine third size pasta basket, designed for use with compatible Lincat pasta cookers. It offers a reduced-capacity option within the basket range, allowing operators to cook smaller quantities independently while other baskets run simultaneously in the same unit.

In a working pasta station, having the right basket size for each portion load makes a practical difference during service. A third size basket is useful when you are managing multiple pasta types at once, working with different cook times, or simply controlling output more precisely at quieter points in a shift. Running a full-size basket for a modest quantity can affect recovery and consistency — a correctly sized basket helps maintain throughput without unnecessary waste or delay.

As a genuine Lincat accessory, the OA8924 is built to fit and seat correctly within compatible units. Proper fitment matters in a hot, wet environment — incorrect seating can affect both safety and the evenness of the cook. The basket is designed to handle the repeated thermal cycling that comes with sustained use across a busy service.

It is worth confirming compatibility with your specific Lincat pasta cooker model before ordering, as basket fitment does vary across the range. If your operation runs a high-output pasta station requiring greater capacity, larger basket options are available that may be a better match for your volume.

If you are unsure which basket size or combination suits your service style, we are happy to talk it through before you order.

These are the phosphate-free cleaning tablets produced by Rational for use with their SelfCookingCenter and CombiMaster Plus combi ovens equipped with Efficient CareControl. Supplied in tubs of 130 red tablets, they are the consumable component the oven's automated cleaning system is designed to use.

Rational's automated cleaning programmes rely on the correct tablet chemistry to work as intended. These tabs are highly concentrated and formulated to break down grease, protein residue, and carbonised deposits that accumulate during heavy service — the kind of soiling that builds up quickly in a busy kitchen running roasting, steaming, and combination cycles throughout the day. Using the correct Rational-specified tabs helps ensure the cleaning cycle performs to its designed standard and that oven cavity surfaces, steam generators, and drainage components are properly maintained over time.

Using the manufacturer's own cleaning consumables in a Rational oven is worth considering for several practical reasons:

• Formulated specifically for Rational's CareControl cleaning programmes
• Phosphate-free formula reduces environmental load in wastewater
• Highly concentrated — each tab is calibrated to the oven's dosing system
• Red tab identification helps kitchen teams distinguish cleaner tabs from rinse tabs
• Supplied in a 130-tab tub suitable for regular ongoing use

It is worth confirming which cleaning tab type and colour your specific Rational model requires before ordering. Rational ovens use different tab types depending on the model generation and the cleaning programme in use, and using the wrong tab can affect cleaning results or, in some cases, trigger programme errors. If you are unsure which consumables your oven needs, the team is happy to help you confirm the right specification.

The Crown Verity BC72 is a purpose-made protective cover designed to fit the MCB72 mobile barbecue. It is a straightforward accessory with a clear function — keeping the unit protected when it is not in use.

Outdoor catering equipment is exposed to more wear between services than most operators account for. Dust, airborne debris, and damp conditions can gradually affect burner components, cooking surfaces, and stainless steel bodywork if left uncovered. For operators who run the MCB72 seasonally or move it between sites and events, a reliable cover helps maintain the unit in good working order across a longer service life.

Using a manufacturer-matched cover rather than a generic alternative is worth considering. A correctly fitted cover sits flush against the unit, which reduces the risk of moisture pooling or becoming trapped against surfaces — a common cause of surface corrosion on stainless steel equipment over time.

This cover is designed specifically for the MCB72 model and is not a universal fit. It should not be assumed compatible with other Crown Verity barbecue sizes without confirming first.

If you are looking after a Crown Verity MCB72 and want to make sure you have the right accessories to keep it in good condition, the team is happy to point you in the right direction.

The Cinders Single Pan Support is a reversible accessory designed exclusively for the Cinders Classic TG160 barbecue. It serves two distinct functions depending on how it is fitted: hung over the end of the barbecue to hold a gastronorm pan at the side, or reversed to sit above the cooking surface and act as a dry bain-marie. It accepts a single full-size 1/1 gastronorm pan at 100mm depth. The pan itself is not included.

In a live outdoor service setting, the side-hung position allows pans to be loaded and swapped without encroaching on the grill area, so the full cooking surface remains accessible throughout service. The bain-marie position makes practical use of residual heat from the barbecue to keep sauces, glazes, or accompaniments at temperature — without needing a separate heat source or any power connection. That is a genuine operational advantage when working at events or off-site locations where access to power may be limited or unpredictable.

• Reversible design provides two working configurations from a single accessory
• Side-hung position keeps the full grill surface free during service
• Dry bain-marie position draws on barbecue residual heat — no power required
• Compatible with the standard 1/1 100mm gastronorm pan format
• Compact and lightweight, well suited to mobile and multi-site event work

This accessory is worth considering for operators who run the TG160 for outdoor catering, festivals, or event work and want to extend the unit's capability without adding to the equipment load. It is not a universal fit — it is made specifically for the TG160, so it is worth confirming your barbecue model before placing an order.

If you are building out a TG160 setup for a particular type of service, we are happy to talk through how this and other accessories work together in practice.

This is a genuine Rational accessory designed to protect the left-hand side panel of the iCombi XS 6-2/3 combi oven from radiant heat generated by an adjacent appliance. It fits directly to the oven's outer casing and acts as a thermal barrier between the unit and any neighbouring heat source — typically a grill, salamander, or solid top range positioned in close proximity.

Without adequate protection, sustained radiant heat from an adjoining appliance can cause gradual damage to the oven's external panels and, over time, the components beneath them. In tightly configured kitchens — compact back-of-house lines, island runs, or sites where equipment has been consolidated to save space — this kind of heat transfer is a genuine operational risk. The shield addresses that directly, allowing the iCombi XS to continue working normally regardless of what is running alongside it.

Being retrofittable, it can be added without repositioning the oven or undertaking significant installation works. This makes it a practical solution during kitchen refits, equipment additions, or line reconfigurations where the relationship between appliances has changed.

• Thermal barrier between the iCombi XS and an adjacent radiant appliance
• Protects left-hand casing in island or close-quarter configurations
• Retrofittable without moving or reconfiguring the oven
• Genuine Rational part, ensuring correct fit and compatibility with the XS 6-2/3
• Straightforward to specify during refits or equipment additions

It is worth confirming your specific iCombi XS configuration and the exact layout of your installation before ordering, particularly if you are working around an existing equipment line. If you are mid-refit and want to talk through whether this shield is the right solution for your setup, we are happy to help.

The Parry 7075 wall brackets are a purpose-made mounting accessory designed to allow compatible Parry grill and charcoal units to be fixed securely to a wall. Rather than sitting on a stand or countertop, wall-mounted installation can free up valuable worktop space and create a cleaner, more permanent setup in a busy service kitchen.

These brackets are confirmed as compatible with Parry models 1872, CPG, CAS, and CAS2. If you are unsure whether your specific model is covered, it is worth checking before ordering — fitting the wrong bracket to a heavy piece of equipment is a straightforward problem to avoid with a quick conversation.

Wall mounting a grill unit does introduce some practical considerations worth thinking through before installation: the wall structure must be capable of bearing the combined weight of the bracket and the unit, appropriate fixings will need to suit the wall material, and positioning should account for adequate clearance to surrounding surfaces and ventilation requirements above the unit. In most cases this is a job for a competent installer or gas engineer depending on the type of unit being mounted.

These brackets suit kitchens where space efficiency matters and a fixed, permanent grill position is preferable to a freestanding arrangement. They are a simple but practical addition when setting up or reconfiguring a Parry grill installation.

If you would like to confirm compatibility with your existing Parry equipment or discuss your installation setup, the team is happy to help you work through the specifics before you order.

The Roller Grill B3 is a purpose-made clamp basket designed to work with the RBE80, RBE120, RBE200, RBG80, RBG120, and RBG200 rotisserie ranges. It provides an enclosed cooking cavity that securely holds smaller cuts of meat, whole poultry portions, or irregularly shaped items that would not sit reliably on a standard spit. The basket engages directly with the oven's existing drive mechanism and rotates throughout the cooking cycle, requiring no modification to the base unit.

In a working kitchen, the clamp basket earns its place when you need consistent results across varied product sizes, or when cooking items that would otherwise require individual trussing or skewering. Because the product is held firmly in place, loading is straightforward and finished presentation is noticeably more uniform — useful when both speed and consistency matter during service.

• Extends the range of product types cookable on an existing rotisserie unit
• Reduces loading and preparation time compared with spit-mounting individual items
• Produces even browning throughout the cooking cycle without manual intervention
• Engages with the existing drive system — no additional tools or parts required
• Removable for cleaning between services as part of normal rotisserie maintenance

It is worth confirming your rotisserie model number before ordering. Clamp baskets are not universally interchangeable across different rotisserie ranges, and this basket is specifically engineered for the models listed above. Using an incompatible basket risks poor drive engagement and uneven cooking results.

If you are unsure whether this basket is the right fit for your existing unit, or if you are putting together a rotisserie setup and want to talk through which base unit and accessories would suit your operation, the team is happy to help you work it out.

The Crown Verity PGRID36 is a heavy-duty rolled steel griddle plate designed to fit the Crown Verity MCB36 and MCB72 outdoor gas barbecues. It replaces the standard grill grates with a flat cooking surface, opening up a wider range of menu options — eggs, smashed burgers, pancakes, thin cuts, and finely diced ingredients — that would not be practical on an open-bar grill. The slide-on fitting requires no tools, so the changeover between grill and griddle cooking can be done quickly during service without disrupting the operation.

In busy outdoor catering environments, heat consistency across the cooking surface is important. The thick rolled steel construction holds and distributes heat evenly, helping to reduce hot spots and maintain stable temperatures during sustained service runs. For operators working long outdoor events where the barbecue is running continuously, this even heat retention makes a practical difference to output and consistency. The included splashguard helps contain grease and residue during cooking, and the removable grease tray makes end-of-service cleaning more manageable.

• Slide-on, tool-free fitting for fast changeover between griddle and grill surfaces
• Thick rolled steel plate for even heat distribution under sustained use
• Splashguard helps contain cooking residue during service
• Removable grease tray simplifies cleaning at end of service
• Compatible with both MCB36 and MCB72 barbecue models

It is worth noting that the PGRID36 is only compatible with the MCB36 and MCB72 — it is not a universal fitting across the Crown Verity range. If you are running a different Crown Verity model, confirming compatibility before ordering is advisable. Operators who need a dedicated flat griddle surface running full-time at high volume may also want to consider whether a standalone commercial flat-top better suits their output requirements.

This plate is well suited to mobile caterers, outdoor event operators, and hospitality venues already running Crown Verity MCB barbecues who want the flexibility to add griddle cooking without investing in a separate unit. It is a practical accessory rather than a standalone piece of kit, and its real value lies in the versatility it adds to an existing setup.

If you are unsure whether the PGRID36 suits your current barbecue model or service setup, feel free to have a conversation with the team before ordering.

The Lincat BA115 is a quarter size pasta basket made specifically for use with Lincat's PB33 single tank and PB66 twin tank pasta cookers. It fits directly into the cooking well, subdividing the available capacity so operators can cook smaller, independent portions rather than filling the full tank with a single product.

In a working kitchen, that flexibility has clear practical value. Where a menu carries two or three pasta dishes, individual baskets allow different types to cook simultaneously without cross-contamination of flavours or the need to run separate equipment. During quieter service periods, cooking in smaller batches also reduces over-production and the wastage that tends to follow when output is tied to the full tank volume.

• Subdivides the cooking well for simultaneous, separate pasta types
• Compatible with both the PB33 single tank and PB66 twin tank pasta cookers
• Supports portion control across both busy and quieter covers
• Easy to lift, drain, and clean within a normal service routine
• Reduces batch over-cooking when demand is lower

This is a straightforward addition for any operation already running a compatible Lincat pasta cooker. It is worth confirming how many baskets your configuration can accommodate before ordering — on the PB66 in particular, multiple baskets across both tanks may already be in use, and total capacity should be considered accordingly.

If you would like to talk through how this basket works within your current setup, we are happy to help.

The Crown Verity BC36 is a purpose-made protective cover designed to fit the MCB36 commercial barbecue unit. It is a straightforward accessory with a single, practical function: keeping the barbecue protected from weather, dust, and general site exposure when not in service.

For operators running outdoor catering events, seasonal terrace service, or permanent outdoor kitchen setups, leaving a commercial barbecue uncovered between uses accelerates wear on burner components, control valves, and cooking surfaces. Moisture ingress in particular can affect ignition reliability and surface condition over time. A correctly fitted cover reduces that exposure and helps keep the unit in consistent working order across a season.

• Tailored fit for the MCB36 ensures complete coverage without improvisation
• Helps protect burner assemblies and control valves from moisture and debris
• Reduces pre-service cleaning time by limiting dust and contaminant build-up
• Supports the long-term condition of the unit in exposed outdoor environments

It is worth noting that this cover is compatible with the MCB36 only. It is not a universal fit and should not be assumed to suit other Crown Verity models without confirming compatibility first.

This cover is best suited to operators who already own the MCB36 and use it regularly in an outdoor or semi-exposed setting. If you are unsure whether your specific MCB36 configuration is compatible, or if you are sourcing the barbecue and accessories together, the team is glad to help you confirm the right combination before you order.

The Crown Verity G2022 is a 533mm drop-on griddle plate designed specifically for use with Crown Verity MCB barbecues. It sits directly over the existing grill grates, converting the open-flame cooking surface into a flat-top griddle without any permanent modification or additional connections. It draws heat from the barbecue burners beneath it, giving operators a straightforward way to expand what a single unit can produce during service.

In practice, this kind of accessory earns its place at outdoor catering stations, hospitality events, and festival or street food setups where the same barbecue needs to handle both grilled and griddle-cooked items across a busy shift. Switching between surfaces without changing equipment keeps the operation practical and the footprint compact — useful when space or logistics are a constraint.

The main operational advantages this plate adds to an existing MCB unit:

• Flat cooking surface for eggs, bacon, pancakes, and similar items
• Drop-on fit — no tools, no permanent modification, no extra connections
• Consistent heat transfer direct from the barbecue burners below
• Extends menu range without requiring a separate piece of equipment
• Easy to lift off and clean between service periods

Compatibility is confirmed for Crown Verity MCB barbecues only — it should not be assumed to fit other brands or models. As with any outdoor cooking setup, the host barbecue should be on a stable, level surface before the plate is placed into service. The plate itself adds no gas or electrical requirement beyond what the barbecue already demands.

This plate suits caterers, hospitality venues, and event operators who already run Crown Verity MCB barbecues and want to add griddle capability without the cost or footprint of a dedicated unit. For sites running consistently high volumes of flat-top cooking, a standalone griddle may prove a more practical long-term investment.

If you'd like to talk through how this fits into your current outdoor cooking setup, our team is glad to help you think it through.

The Lincat OA8911 is a purpose-built wall shelf designed to be used alongside compatible Lincat salamander grills. As a manufacturer-matched accessory rather than a generic bracket, the fixing geometry and positioning are intended to work with specific Lincat salamander models — which makes for a cleaner, more reliable installation than adapting an off-the-shelf solution.

At the grill section or pass, a properly positioned shelf earns its place quickly. It gives chefs a dedicated surface close to the salamander for plates, dressed dishes, or items queuing to be finished under the heat. During a busy service, that structural tidiness reduces the small inefficiencies that build up when surfaces are improvised or when the immediate area around the grill becomes cluttered.

• Manufacturer-matched design for a secure, intended fit with compatible Lincat salamanders
• Wall-mounted to keep the area beneath and around the grill clear
• Dedicated surface positioned close to the heat source for pass efficiency
• Supports an organised workflow during high-volume covers
• Straightforward installation — no complex setup required

One practical point before ordering: Lincat produce several salamander variants and not all accessories are interchangeable across the range. It is worth confirming your existing unit is compatible with the OA8911 before purchasing — a quick check avoids a mismatch on delivery.

This shelf suits operators who already own a compatible Lincat salamander and want to make better use of the space and workflow around it. If you are unsure whether it will fit your current setup, the team are happy to check compatibility before you place an order.

This is the manufacturer-matched wall bracket designed specifically for the Convotherm 6.10 Mini combi oven. It allows the oven to be mounted at a practical working height on a suitable wall surface, freeing up counter or floor space in kitchens where every square metre is accounted for.

In compact restaurant kitchens, satellite serveries, and back-of-house prep stations, floor and counter space is routinely at a premium. Mounting the oven at the correct ergonomic height using the correct bracket keeps the unit stable and properly positioned for day-to-day operation. It also avoids the improvised solutions that can compromise both safety and ease of access — something that matters when staff are loading and unloading repeatedly across a busy service.

Using the Convotherm-matched bracket rather than a generic alternative is worth considering carefully. It is designed to the correct load specification and fixing geometry for this oven, which means the installation sits as intended with no guesswork around load ratings or compatibility with the oven's existing fixing points.

• Purpose-built for the 6.10 Mini with correct load rating and fixing geometry
• Positions the oven at a comfortable, practical working height for kitchen staff
• Supports a clean, permanent installation rather than a temporary workaround
• Maintains safe, unobstructed access to the door, controls, and interior
• Frees up counter or floor space in tight kitchen layouts

Before ordering, it is worth confirming that your wall construction is suitable for the combined load of the bracket and oven. Solid masonry or a properly rated stud partition with appropriate fixings is typically required — a standard plasterboard wall alone will not suffice. If you have any questions about wall suitability or how this fits into your kitchen layout, the team is happy to talk it through beforehand.

The Crown Verity RFS72 is a removable front shelf made specifically for the MCB72 commercial barbecue. It attaches directly to the unit and gives the operator a usable surface immediately in front of the cooking area — useful for staging plated food, keeping sauces and seasonings to hand, or resting items briefly during service without having to reach across to a separate table.

In a busy outdoor or event catering setup, working space around the grill is often limited. Having a fixed staging point at the front of the unit helps keep service organised and reduces the small but disruptive interruptions that come from a cluttered or underprepared workstation. It is a modest addition, but one that makes the grill a more complete working station rather than an isolated cooking surface.

Because it is removable, it can be taken off for transport, storage, or where space around the unit is restricted. It is designed to fit the MCB72 specifically, so there is no guesswork around compatibility when it is ordered alongside that model.

• Adds a staging surface directly at the front of the MCB72
• Removable for easy transport and compact storage
• Keeps condiments, plates and utensils within reach during service
• Designed to fit the MCB72 without adaptation
• Supports a more organised workstation in outdoor or event settings

This shelf suits event caterers, outdoor hospitality operators, and any team running the MCB72 as a primary service unit who want to make better use of the space immediately around the grill. If you are putting together a full Crown Verity setup and want to talk through which accessories will work best for your service style, we are happy to help.

The Crown Verity RD60 is a roll dome lid made specifically for use with the Crown Verity MCB60 barbecue. Fitted over the cooking surface, it creates an enclosed environment that circulates heat around the food rather than allowing it to escape upward. It is a straightforward accessory with a clear purpose — extending what the MCB60 can do without requiring additional equipment.

On a busy grill, retaining heat makes a noticeable difference to throughput and consistency. Thicker cuts of meat, poultry pieces, and bone-in portions benefit considerably from the indirect, convection-style heat the dome creates. During peak service, when the grill surface is heavily loaded, an open setup can struggle to maintain temperature; the dome helps compensate for that heat loss and keeps cooking times predictable.

For operators running the MCB60 at events, festivals, or in a permanent outdoor hospitality setting, the practical advantages include:

• Indirect and convection-style cooking on a direct-flame grill
• More consistent results on thicker or bone-in cuts with less operator intervention
• Improved temperature retention when the cooking surface is fully loaded
• Broader menu capability without the need for additional cooking equipment
• Purpose-built fit that eliminates heat loss around the edges

One important consideration: the RD60 is designed exclusively for the MCB60 model and will not fit other Crown Verity barbecue sizes. Confirming your exact model before ordering is essential. Fitting requires no tools — the dome rolls and sits directly into place on the barbecue frame.

This lid suits catering operators and outdoor hospitality venues already using the MCB60 who want to handle a wider range of menu items during service. If you would like to talk through whether this works for your current setup, the team is glad to help.

The Victor DHCP1 is a glass carvery insert designed to drop into compatible Victor hot cupboards and bain marie-topped servery units. It replaces a standard pan position with an open, glass-lined display area, giving both guests and carving staff a clear, unobstructed view of whole joints or large cuts throughout service.

In a working carvery environment, counter presentation plays a genuine role in the dining experience. This insert allows an existing Victor servery to take on a dedicated carvery display function without requiring a separate counter or a full equipment replacement. The glass construction keeps the counter looking consistent and well-organised, and the open-top format means carving staff can access the joint directly without lifting lids or moving covers between portions.

• Slots into compatible Victor hot cupboard and bain marie servery positions
• Glass construction provides guests and staff with a clear view of the joint
• Open-top format allows unobstructed carving access throughout service
• Designed to a 1/1 GN footprint for a flush, stable fit within the counter
• Removable at the end of service for straightforward cleaning

It is worth being clear that this is an unheated accessory. Temperature retention depends entirely on the host unit beneath it, so the insert works best in a properly maintained and adequately heated servery. Before ordering, it is sensible to confirm that your existing Victor unit is configured to accept a 1/1 GN pan at the intended position, as counter layouts can vary across the range.

This insert suits operators who already run a Victor carvery or servery setup and want to add or replace a display position within their existing counter. If you are building a new carvery station from the ground up and want to make sure everything works together, the team is happy to talk it through.

The Lincat GR3/FS is a dedicated floor stand designed solely for use with the Lincat GR3 salamander grill. Rather than wall-mounting the grill or occupying bench space, this stand converts the unit into a freestanding, floor-level installation at a practical working height. It is not a universal fitting and is not compatible with other Lincat salamander models.

In a working kitchen, salamander positioning has a direct effect on service flow. Chefs finishing, glazing, and holding dishes at the pass need reliable, comfortable access without unnecessary reaching or adjusting. A correctly positioned salamander keeps throughput consistent during busy service, and the stand provides that stability in kitchens where wall-mounting is not feasible — whether due to layout constraints, surface material, or the need to occasionally reposition the unit.

The open-frame construction allows cleaning access around and beneath the grill, which helps prevent grease and debris accumulating at floor level. This is a practical advantage in kitchens subject to routine environmental health inspection, where evidence of thorough cleaning access matters.

• Converts the GR3 salamander to a stable freestanding installation
• Raises the grill to a comfortable working height at the pass
• Open-frame base allows cleaning access beneath the unit
• Suited to kitchens where wall-mounting is not practical
• Self-contained — no wall fixing or bench space required

When planning the installation, account for the increased overall height of the combined unit and ensure adequate overhead clearance for safe operation and ventilation. This stand is specific to the GR3 and should not be assumed to fit other models.

If you are planning a new salamander setup and want to confirm the right configuration for your kitchen, we are glad to talk it through.

The Lincat OA8914 is a purpose-built floor stand designed to raise compatible Lincat equipment to a practical working height. As a manufacturer-matched accessory rather than a generic support, it is engineered to suit the specific footprint and load characteristics of the corresponding Lincat unit, producing a stable and well-proportioned installation.

In a working kitchen, equipment height has a more direct impact on day-to-day operations than it might initially appear. A unit sitting at or close to floor level creates awkward working postures during service, complicates routine cleaning underneath and around the equipment, and can create hygiene risks in environments where cleanliness standards are actively monitored. A correctly specified stand addresses all three concerns without requiring bespoke fabrication or improvised solutions.

The practical advantages of using the matched manufacturer stand include:

• Raises the unit to a comfortable, ergonomic working height for service staff
• Improves access for cleaning beneath and around the equipment
• Supports compliance with commercial kitchen hygiene requirements
• Provides a stable, well-matched base suited to the unit's footprint
• Produces a tidier, more professional installation than makeshift alternatives

Because the OA8914 is designed for specific Lincat equipment rather than as a universal stand, confirming compatibility with your model before ordering is important. Not all Lincat stands are interchangeable, and fitting out a new station or replacing an existing stand is straightforward once the correct match has been identified.

If you are unsure whether this is the right stand for your unit, we are happy to talk it through before you place an order.

The Lincat BA82 is a full size mesh fryer basket made specifically for the Lincat Opus range. It is supplied as a like-for-like replacement or as an additional basket for existing installations, built to the same specification as the basket originally shipped with the unit.

In a working fryer station, having a second basket in rotation makes a practical difference to throughput. One load can drain and rest while the next goes straight in, keeping the frying cycle unbroken through a busy service period. The mesh construction allows oil to fall away cleanly after lifting, which helps preserve oil quality across a shift and keeps portion presentation consistent. The moulded handle reduces heat transfer and provides a stable, controlled grip when lifting a full load from hot oil — a detail that matters when the station is under pressure.

• Confirmed fit for Lincat Opus fryers — check compatibility with your specific model before ordering
• Full size basket suited to high-volume frying: chips, battered fish, breaded portions
• Mesh design allows rapid, clean oil drainage after each lift
• Moulded handle provides secure grip and reduces heat transfer during service
• Like-for-like replacement matching original factory specification

This basket is not a universal fit and is intended solely for Lincat Opus fryers. It will not suit all fryer models or brands, so it is worth confirming compatibility with your specific unit before ordering. If you are unsure which basket is correct for your Opus fryer, the team can help you check before you commit.

The Crown Verity ABR60 is a purpose-built bun rack designed specifically for use with the MCB60 barbecue. It sits inside the RD60 roll dome, making practical use of the existing hood space to warm or lightly toast buns and bread rolls during service — without requiring a separate piece of equipment at the station.

In a busy outdoor or event catering environment, keeping a bun warmer integrated into the grill unit is a straightforward operational advantage. The rack offers four adjustable height positions, which allows operators to manage the heat level reaching the product — useful when switching between delicate brioche buns and sturdier bread rolls, or when the grill itself is running at varying temperatures through a long service period.

The practical benefits are modest but well-targeted:

• Removes the need for a separate bun warmer or toaster at the station
• Keeps the catering footprint compact during outdoor or event service
• Adjustable positions give control over warming intensity
• Fits within equipment already in use — no additional power source required
• Straightforward to fit and remove for cleaning between services

It is worth confirming before ordering that you have the RD60 roll dome as part of your MCB60 setup, as the ABR60 is designed to work within that specific enclosure. Without the roll dome, the rack has no suitable mounting point.

This accessory is well suited to outdoor event caterers, festival traders, sports venue operators, and mobile catering teams running regular high-volume burger or hot dog service from a Crown Verity MCB60. If you are unsure whether this fits your current configuration, the team are happy to check with you before you place an order.

The Parry 7073FS is a floor stand designed specifically to work with the Parry 7073. Its primary purpose is to raise the unit to a practical working height, allowing the 7073 to operate as a freestanding piece of equipment where bench or countertop mounting is not possible or not preferred.

For kitchens where the 7073 is a primary piece of service equipment and floor positioning suits the layout better than a built-in bench solution, this stand provides a straightforward means of achieving that setup. It is a dedicated accessory rather than a universal stand, so compatibility with the 7073 is assured.

We currently have limited detail available on the construction, load rating, and any height adjustability of this stand. Before ordering, it is worth confirming with us that it suits your floor type, available footprint, and how it fits into your wider kitchen layout — particularly if the grill will be in a high-traffic section of the kitchen.

If you are specifying the Parry 7073 as part of a wider equipment setup and are unsure whether floor-mounting is the right approach for your space, we are happy to talk it through.