Restaurant Equipment Accessories

This is a genuine Buffalo replacement basket designed for the free-standing single tank twin basket gas fryer. It is a like-for-like spare part rather than a universal accessory, intended to restore a worn or damaged fryer to full working order without compromising fit or performance.

In a busy kitchen, fryer baskets take considerable punishment — repeated immersion in hot oil, daily cleaning, and the general wear of high-volume service. Having a direct replacement to hand reduces downtime when a basket becomes damaged or reaches the end of its serviceable life. A genuine part ensures the basket seats correctly in the tank and handles as expected, which matters when staff are working quickly during service.

• Genuine Buffalo part — correct fit for the compatible fryer model
• Maintains safe, consistent operation during busy service periods
• Replaces worn or damaged baskets without improvisation
• Supports the twin basket configuration as originally designed
• Helps avoid service interruption caused by failed equipment

This basket is compatible with the Buffalo HU199 gas fryer. It is worth confirming your fryer model before ordering, as Buffalo produces several fryer variants and basket sizing is not always interchangeable across the range.

If you are unsure whether this basket is the right match for your equipment, or if you are looking at replacing other components on your fryer at the same time, the team is happy to help you confirm compatibility before you order.

This is the manufacturer's replacement basket for the Buffalo DC319-N single tank twin basket freestanding gas fryer. It is a direct like-for-like spare, designed to restore the fryer to full working condition when an original basket becomes damaged, lost, or worn beyond practical use.

In a busy service environment, fryer baskets take considerable punishment — repeated immersion in hot oil, constant handling, and regular cleaning all contribute to wear over time. Handles loosen, mesh distorts, and hinges fatigue. Having the correct replacement to hand avoids unnecessary downtime when a basket reaches the end of its working life.

Using a manufacturer-matched basket rather than a generic alternative means the fit, load capacity, and hinging action remain consistent with the original design. This matters in practice — an ill-fitting basket can affect oil drainage, portion consistency, and safe handling during service.

This basket is a single unit and is compatible specifically with the DC319-N model. If you are unsure whether this fits your fryer, or if you are running a different Buffalo model, it is worth confirming compatibility before ordering. Our team are happy to help identify the correct basket for your equipment.

This is a genuine Buffalo replacement oil pan seal, designed to fit the GH124, GH125, GH126, and GH127 countertop fryer models. Its purpose is straightforward: to maintain a secure, properly sealed join between the oil pan and the fryer body, preventing oil leaks and keeping the unit operating safely.

In a working kitchen, an oil pan seal is a wear part. Over time, exposure to heat cycling, cleaning chemicals, and regular removal of the oil pan for cleaning will degrade the original seal. When a seal begins to fail, it can allow oil to seep around the pan, creating a cleaning burden, a potential safety hazard, and accelerated wear on surrounding components. Replacing the seal promptly keeps the fryer running cleanly and reduces the risk of more costly damage.

Using a genuine Buffalo part ensures the seal dimensions and material specification match the original, which matters for fit and longevity. Non-genuine alternatives may not seat correctly or withstand the heat and chemical exposure of commercial fryer service.

This seal is a straightforward like-for-like replacement requiring no tools or specialist knowledge to fit, though it is worth confirming your specific fryer model number before ordering to ensure compatibility.

If you are unsure whether this seal is correct for your unit, or if your fryer is showing other signs of wear, our team is happy to help you work through what is needed.

This is the manufacturer's replacement basket assembly for Buffalo countertop fryers, compatible with models GH124, GH125, GH126, and GH127. It is a like-for-like spare part intended to restore a fryer to full working order when the original basket has become damaged, deformed, or worn beyond serviceable use.

In a busy kitchen, fryer baskets take considerable punishment — repeated immersion in hot oil, knocks against the tank, and daily cleaning cycles all take a toll over time. Having the correct replacement to hand avoids unnecessary downtime during service. Because this assembly is sourced from Buffalo directly, the fit, handle position, and basket dimensions match the original specification of the supported fryer models.

This part is suited to any operator running one of the compatible Buffalo countertop fryer models who needs a straightforward replacement rather than a workaround with an ill-fitting alternative. It is worth keeping a spare on hand if your fryer sees continuous use throughout the day.

If you are unsure whether this basket assembly is the right match for your unit, or if you are looking at a broader service or replacement query for your fryer, feel free to get in touch with the team — we are happy to help you confirm compatibility before you order.

This is a purpose-built floor stand designed to support Buffalo's double 8ltr fryer units, raising the fryers to a workable height and providing a stable base within the frying station. It is a straightforward piece of supporting equipment rather than a complex unit in its own right, but it plays a useful role in organising the frying area and keeping equipment off the floor surface.

In a busy kitchen, having fryers at the correct working height reduces operator fatigue during service and makes day-to-day cleaning around and beneath the units more manageable. A raised stand also allows easier access to the underside of the fryers for routine maintenance checks. The stand is designed specifically for the Buffalo double fryer configuration, so fitment is straightforward with no adaptation required.

• Raises fryers to a practical standing working height
• Provides a stable, dedicated base for the twin fryer setup
• Improves access beneath units for cleaning and maintenance
• Designed specifically to match Buffalo double 8ltr fryer footprint
• Keeps fryer units clear of floor level in the frying station

It is worth confirming your available floor space before ordering, as combining the stand with the double fryer unit will increase the overall footprint of the frying station. This stand is sized for the specific Buffalo double fryer models and is not a universal fryer stand, so compatibility with other brands or configurations should not be assumed.

This stand suits smaller to mid-sized operations running a Buffalo double fryer setup — cafés, pub kitchens, small restaurants, and similar sites. If your operation requires a more substantial frying capacity, it may be worth exploring higher-output fryer configurations before settling on this setup.

If you're unsure whether this stand is compatible with your existing Buffalo fryer or how it fits into your kitchen layout, we're happy to talk it through before you order.

This is a genuine Buffalo replacement top heatproof tray, designed specifically for the Buffalo Quartz Salamander Grill (CJ799). It is a like-for-like spare part intended to restore the unit to its original operating condition rather than a universal accessory.

In a busy kitchen, the heatproof tray on a salamander takes sustained punishment — direct radiant heat, grease splatter, and the general wear of continuous service. Replacing it with a genuine part rather than an aftermarket alternative helps ensure the fit, heat tolerance, and safe operation that the original equipment was designed around.

If you are unsure whether this tray is the correct part for your unit, or if you need guidance on other Buffalo salamander spares, we are happy to help you confirm compatibility before you order.

This is the genuine Buffalo replacement crumb tray designed to fit the Buffalo CJ753 salamander grill. It sits beneath the grill's heating zone to collect food debris, fat drips, and carbonised residue that accumulate during normal service — keeping the unit cleaner between deep cleans and reducing the risk of flare-ups or odour build-up during service.

In a busy kitchen, crumb trays take a great deal of heat and daily abuse. Over time they warp, corrode, or simply become too fouled to clean effectively. Having a genuine replacement to hand means you can swap it out quickly without any downtime — particularly useful in high-throughput operations where the salamander runs continuously across multiple services.

• Designed specifically for the Buffalo CJ753 salamander — ensures correct fit without modification
• Collects grease and food debris, reducing flare-up risk during service
• Easy to remove and clean between services
• Replacing a worn tray helps maintain hygiene compliance
• Genuine Buffalo part — consistent quality and accurate fit

This tray is a direct like-for-like replacement and requires no tools or technical knowledge to fit. It is worth keeping a spare in stock if your salamander is in constant use — it is one of those consumable components that is easy to overlook until it fails.

If you are unsure whether this tray is compatible with your specific unit, or if you have an older Buffalo salamander and want to confirm the right part, feel free to get in touch with the team before ordering.

This is a genuine Buffalo replacement basket designed to fit the Buffalo Countertop Electric Fryer with Timer 5Ltr (CU622) and the Electric Fryer with Timer 2x5Ltr (CU624). It is a straightforward like-for-like spare, manufactured to the same specification as the original basket supplied with those units.

In a working kitchen, fryer baskets take considerable punishment — repeated immersion in hot oil, heavy loads, and daily cleaning cycles all take their toll over time. Having a genuine replacement to hand means you can swap out a worn or damaged basket without interrupting service or resorting to an ill-fitting alternative that affects cooking consistency or safety.

Because this basket is made to fit the Buffalo CU622 and CU624 specifically, it sits correctly in the fryer, operates safely with the timer mechanism, and avoids the handling risks that can come with generic or incompatible baskets. It is worth keeping a spare in stock if fryers are in heavy daily use.

If you are unsure whether this basket is compatible with your current Buffalo fryer model, or if you need advice on replacement parts more generally, we are happy to help before you order.

This is the manufacturer-matched top tray for the Buffalo salamander grill range, specifically designed to fit the GF452 and GF453 models, as well as the DB177 and DB183 units. It is a direct replacement part intended to restore the grill to full working condition when the original tray has warped, corroded, or been damaged through heavy service use.

Salamander grills take considerable punishment in a busy kitchen — constant high heat, grease splatter, and daily cleaning cycles all take their toll on the top tray over time. Having a correctly fitted replacement to hand means a grill can be returned to service quickly rather than sitting idle while a fabrication workaround is attempted or a full unit replacement considered.

• Direct fit for GF452, GF453, DB177, and DB183 salamander models
• Maintains correct clearance and heat reflection geometry
• Restores the grill to manufacturer specification
• Suitable for ongoing heavy service use

It is worth confirming your exact model number before ordering, as salamander trays are not universally interchangeable even within the same brand range. If you are unsure which tray corresponds to your unit, the team is happy to help you verify compatibility before you commit to a purchase.

This is a genuine Buffalo replacement basket designed specifically for the Buffalo countertop electric fryer in both its single-tank (CU620) and twin-tank (CU621) configurations. It is a direct like-for-like replacement, so it fits the fryer correctly without any modification or adaptation.

In a busy kitchen, fryer baskets take considerable punishment — repeated immersion in hot oil, frequent handling during service, and regular cleaning cycles all contribute to wear over time. Having a spare or replacement basket on hand avoids unnecessary downtime when a basket eventually shows signs of damage or fatigue.

As a genuine manufacturer part, this basket is made to the same specification as the original, so operators can expect consistent performance without concerns about fit, weight distribution in the oil, or handle reliability.

It is worth confirming your fryer model number before ordering. This basket is compatible with the CU620 and CU621 only — it will not necessarily fit other Buffalo fryer models, even those with a similar tank capacity.

If you are unsure whether this basket suits your specific fryer, or if you need advice on spare parts and accessories for your kitchen equipment, feel free to get in touch with the team.

This is the manufacturer's replacement cooking grid for the Buffalo CP240 combi BBQ and griddle unit. It is a direct like-for-like part, intended to restore the cooking surface to its original condition when the existing grid has worn, warped, or become damaged beyond practical cleaning.

In a busy kitchen, cooking grids take considerable punishment — sustained high heat, repeated thermal cycling, heavy food loads, and daily cleaning with abrasive agents all shorten their service life. Replacing the grid rather than the whole unit is the practical route when the rest of the CP240 remains in good working order, and using the correct manufacturer's part ensures the fit, spacing, and heat transfer characteristics match the original design.

A few points worth noting before ordering: this grid is designed specifically for the Buffalo CP240 and will not necessarily be compatible with other models in the range. If you are unsure which part your unit requires, it is worth checking the model number on the unit itself before placing an order, as fitting an incorrect grid can affect performance and may cause uneven cooking or poor contact with the heat source.

If you have any doubt about whether this is the right part for your equipment, or if your CP240 is showing other signs of wear that a grid replacement alone may not resolve, it is worth having a conversation with us before ordering.

This is a replacement fryer basket designed to fit a range of Buffalo fryers. It serves as a direct like-for-like spare, allowing operators to keep their fryer station running when an existing basket becomes worn, damaged, or lost.

Fryer baskets take considerable punishment in a busy kitchen environment — repeated immersion in hot oil, frequent draining, and the wear of daily service all take their toll over time. Having a spare basket available is a straightforward way to avoid unnecessary downtime at the fryer.

Before ordering, it is worth confirming the model number of your Buffalo fryer to ensure this basket is the correct fit. If you are unsure which basket suits your unit, our team is happy to help you confirm compatibility before you order.

This is a genuine replacement fryer basket designed for Buffalo countertop fryer models, including the DB203, FC255, L370, and P107. It is a spare part intended to replace a worn, damaged, or lost basket rather than serve as an additional accessory, though operators running continuous service may find a spare basket a practical investment.

A fryer basket is a high-contact component that takes considerable daily wear in a working kitchen — repeated immersion in hot oil, mechanical handling, and regular cleaning all take their toll over time. Having the correct genuine replacement to hand avoids unnecessary service downtime when a basket eventually needs replacing.

• Designed to fit Buffalo DB203, FC255, L370, and P107 countertop fryers
• Genuine Buffalo spare part, ensuring correct fit and safe operation
• Suitable for kitchens looking to extend the working life of their existing fryer

It is worth confirming your exact fryer model number before ordering, as basket dimensions and handle fittings vary between models. If you are unsure which basket is correct for your unit, or if your model is not listed above, feel free to get in touch and we can point you in the right direction.

This is a replacement oil pan designed to fit specific Buffalo fryer models, including the FC257, FC258, FC259, L490, and L495. If you are unsure whether this part matches your unit, it is worth checking your fryer's model number before ordering to avoid compatibility issues.

If you have a question about fitment or need help identifying the correct replacement part for your Buffalo fryer, our team is happy to assist.

This is the genuine Buffalo replacement basket designed specifically for the Buffalo 8Ltr Pasta Cooker (model CU630). It is a like-for-like spare part, not a universal or aftermarket alternative, so fit and function are consistent with the original equipment.

In a busy pasta station, baskets take considerable punishment — repeated immersion in boiling water, contact with hot surfaces, and the general wear of a high-turnover service. Having a spare basket on hand means a damaged or missing basket does not bring the station to a standstill mid-service. Many operators running a CU630 keep at least one spare as routine kitchen stock.

Being a genuine Buffalo part, it is built to the same specification as the basket supplied with the unit, which matters for safe handling and consistent portion lifting. A poorly fitting aftermarket basket creates unnecessary risk around a boiling water appliance.

If you are unsure whether this basket is compatible with your pasta cooker, or if you are looking at pasta cooking equipment more broadly, the team is happy to help you work through the options.

This is a replacement frying basket designed to fit Caterlite single and double tank countertop fryers. It is a straightforward like-for-like spare, intended to restore a fryer to full working order when an original basket becomes worn, damaged, or lost.

In a busy kitchen, frying baskets take a considerable amount of daily punishment — repeated immersion in hot oil, heavy food loads, and frequent cleaning all take their toll. Having a replacement to hand avoids unnecessary downtime during service, and keeping a spare basket on site is a sensible precaution for any operation that relies on a fryer as part of its regular menu.

The basket is suited to operators who already own the relevant Caterlite countertop fryer and need a direct replacement rather than a universal alternative. Fit and function are matched to the original unit, which matters for safe and consistent use.

If you are unsure whether this basket is compatible with your specific fryer model, or if you are looking at replacing other components alongside it, the team is happy to help point you in the right direction before you order.

The Buffalo Chargrill Stand is a purpose-built floor stand designed specifically to support Buffalo commercial chargrills. Constructed from stainless steel throughout, it provides a stable, robust base that keeps the chargrill at a practical working height, reducing operator strain during long service periods.

In a busy kitchen environment, having a chargrill at the correct height matters more than it might seem. Too low and operators are hunched over hot equipment for hours; too high and control becomes awkward. This stand addresses that by raising the unit to a comfortable cooking position, which makes a genuine difference over the course of a full service.

From a practical standpoint, the stainless steel construction is well suited to commercial kitchen conditions — it handles heat, grease, and repeated cleaning without degrading. The open frame design also makes it straightforward to wipe down and keep hygienic, which is a consideration in any kitchen operating under inspection.

• Raises the chargrill to an ergonomic working height for long service periods
• Stainless steel build withstands commercial kitchen heat and cleaning regimes
• Designed specifically to pair with Buffalo professional chargrills
• Open frame construction makes cleaning and maintenance straightforward

This stand is suitable for any operation running a Buffalo chargrill that would benefit from a freestanding setup rather than a countertop arrangement. It is particularly useful where the chargrill forms a dedicated station on the cooking line. It is worth confirming compatibility with your specific Buffalo chargrill model before ordering, as stand dimensions are matched to particular units.

If you are unsure whether this stand suits your chargrill model or kitchen layout, the team is happy to check before you commit to an order.

This is the manufacturer's replacement cooking grid for the Buffalo DR826 BBQ grill. It is a direct like-for-like replacement part, intended to restore the cooking surface of the DR826 unit when the original grid has worn, warped, or become damaged through regular commercial use.

Cooking grids on commercial BBQ units take considerable punishment during busy service periods — repeated high-heat cycles, heavy product loads, and frequent cleaning all contribute to gradual deterioration. Having a genuine replacement to hand reduces downtime when the original grid reaches the end of its serviceable life.

This grid is designed specifically for the DR826 model. Compatibility with other Buffalo BBQ units is not confirmed, so it is worth verifying the model number of your existing equipment before ordering.

If you are unsure whether this is the correct part for your unit, or if you need guidance on maintaining your BBQ grill for extended service life, we are happy to help — just get in touch with the team.

This is a replacement basket net designed specifically for the Buffalo 20Ltr electric free-standing fryer, model HU198. Fryer basket nets are a consumable part of daily kitchen operation — mesh wears, distorts, or corrodes over time with repeated immersion in hot oil and regular cleaning, and having a direct replacement to hand avoids unnecessary downtime during service.

Keeping the correct net in use matters more than it might seem. A damaged or ill-fitting net affects how food drains after frying, can allow smaller pieces to fall into the oil, and places uneven stress on the basket frame. Using the manufacturer-matched replacement helps maintain consistent frying results and protects the basket itself from premature wear.

This net is suited to kitchens running the HU198 fryer as part of their standard fry station. It is a straightforward like-for-like replacement rather than an upgrade part, and is worth keeping as a spare so that a worn net can be swapped out quickly without interrupting service.

If you are unsure whether this net is compatible with your fryer model, or if you are working with a different Buffalo fryer from the same range, it is worth checking with us before ordering — fryer basket dimensions can vary between models even within the same manufacturer's lineup.

This is a genuine Buffalo replacement basket designed specifically for the Buffalo Countertop Electric Fryer 3Ltr (CU614) and the Buffalo Countertop Electric Fryer 2x3Ltr (CU615). It is a direct like-for-like replacement, intended to restore a worn or damaged fryer to full working order without any modification or guesswork on fit.

Fryer baskets take considerable punishment in day-to-day service — repeated immersion in hot oil, mechanical stress from loading and draining, and regular cleaning all take their toll. Having a genuine replacement to hand means a basket failure does not become an unplanned interruption to service. For sites running the CU615 twin-tank unit, it is worth keeping a spare basket in stock for each tank independently.

Because this basket is sourced directly from Buffalo and made to the original specification, it will seat correctly in the fryer and behave as expected during use. Third-party alternatives can vary in wire gauge and handle position, which affects both safety and draining performance. A correctly fitting basket also reduces unnecessary wear on the fryer tank rim over time.

This basket suits the CU614 and CU615 models only. If you are unsure which fryer model you have, or whether this basket is the right fit for your unit, the team is happy to help you confirm before you order.

The Buffalo Ceramic Kamado Grid Gripper is a purpose-made handling tool designed to let operators safely lift, remove, or reposition the hot cooking grid on the Buffalo Ceramic Kamado BBQ (DR826) without risk of burns or fumbling with cloths and improvised tools. It is a simple, single-purpose accessory rather than a complex piece of equipment, but in a live service environment it plays a practical role in keeping things moving safely.

When working with a kamado-style cooker at high temperatures, direct contact with the cooking grid is genuinely hazardous. Having the correct grip tool to hand means grids can be repositioned quickly during cooking — whether to add fuel, adjust airflow, or clear the cooking surface — without interrupting service or risking injury.

• Designed specifically to fit the Buffalo DR826 Ceramic Kamado BBQ
• Allows safe handling of hot grids without the need for cloths or oven gloves
• Supports quick grid removal during live cooking and service
• Reduces the risk of burns when adjusting or cleaning the cooking surface
• Compact and easy to store alongside the unit

This gripper is designed for use with the Buffalo DR826 model. If you are unsure whether it is compatible with your existing setup, or if you are putting together a full kamado accessory kit, the team is happy to advise before you order.

This is a genuine Buffalo replacement adjustable foot designed for use with the GH128 and GH129 fryer models. Adjustable feet allow the unit to be levelled correctly on uneven or slightly irregular kitchen floors, which is important for safe operation and accurate oil levels during frying.

Keeping a fryer correctly levelled helps ensure even heat distribution across the oil bath and reduces unnecessary wear on the unit over time. A missing or damaged foot can cause the fryer to sit unevenly, which affects both safety and cooking consistency during busy service periods.

This is a straightforward like-for-like replacement part. If you are unsure whether this foot is compatible with your specific Buffalo fryer model, or if you need to identify the correct part for a different model in the range, it is worth checking with the team before ordering.

This is the manufacturer-matched replacement grilling rack for the Buffalo L508 Pro Toaster Griller. It is a direct spare part intended to restore or maintain the unit's original grilling function, ensuring the rack fits and performs as the machine was designed to operate.

In a busy catering environment, grilling racks take considerable wear — repeated high-heat cycles, heavy manual handling during cleaning, and the general demands of service all shorten the working life of contact components. Having the correct replacement part to hand avoids unnecessary downtime when a rack becomes damaged or worn beyond use.

Using the OEM-matched rack rather than a generic alternative helps maintain consistent contact with the heating elements and ensures the food sits at the correct distance for even browning and thorough heating — both of which matter in a professional kitchen where output quality needs to be repeatable across service.

This rack is specific to the Buffalo L508 Pro Toaster Griller and is not a universal fitting. Before ordering, it is worth confirming your unit's model reference to avoid an incompatible part arriving on site.

If you are unsure whether this is the right component for your machine, or if you are looking at replacing the griller unit itself, the team is happy to point you in the right direction.

This is a genuine replacement crumb tray for the Buffalo salamander grill range, compatible with models GF452 and GF453. It sits beneath the grill zone to catch food debris, fat drips, and carbonised residue during service, keeping the interior of the unit clean and reducing the risk of flare-ups or excess smoke.

In a busy kitchen, a crumb tray takes consistent punishment — repeated heating cycles, grease build-up, and frequent removal for cleaning. Having a serviceable spare on hand avoids any interruption to the grill when the original tray needs replacing or is out of action during a deep clean.

Keeping a clean crumb tray in place also supports hygiene compliance and helps maintain consistent grill performance, as accumulated debris can affect heat distribution over time. Replacement is straightforward and requires no tools.

If you are unsure whether this tray is the correct fit for your unit, or if you need further spares for your Buffalo salamander, our team is happy to help you confirm compatibility before you order.

This is a genuine replacement handle for the drip tray on the Buffalo CP240 combi BBQ and griddle unit. If the original handle has been lost, damaged, or has deteriorated through heavy use, this part restores safe and practical access to the drip tray during and after service.

Keeping the drip tray handle in good working order is a straightforward but important maintenance consideration. A missing or broken handle makes drip tray removal awkward and increases the risk of spillage or burns, particularly during a busy service period. Replacing it promptly keeps the unit operating safely and hygienically.

If you are unsure whether this handle is the correct fit for your unit, or if you need guidance on other Buffalo CP240 replacement parts, our team is happy to help you confirm compatibility before you order.

This is the genuine Buffalo replacement crumb tray designed specifically for the Buffalo Quartz Salamander Grill, model CJ799. It sits beneath the grill to collect food debris, carbonised residue, and grease drips that accumulate during normal service — keeping the unit cleaner and reducing the risk of build-up that can affect performance or create a fire hazard over time.

In a busy kitchen, crumb trays take a significant amount of daily punishment. Repeated high-heat cycles, grease exposure, and routine cleaning can cause warping or damage to the original tray over time. Having a genuine replacement to hand means you can swap it out quickly without interrupting service or compromising hygiene standards.

• Genuine Buffalo part — correct fit for the CJ799 model
• Collects debris and grease drips to protect the grill interior
• Supports routine cleaning and maintenance between services
• Reduces fire risk from accumulated carbonised residue
• Simple swap-out with no tools or specialist knowledge required

This tray is a direct replacement and fits the CJ799 only. If you are unsure whether this is the correct part for your unit, it is worth checking your salamander's model number before ordering, as Buffalo produces several salamander variants and trays are not always interchangeable between models.

If you need help confirming compatibility or want to discuss a maintenance schedule for your Buffalo equipment, the team is happy to assist.

This is the genuine replacement 1/3 GN pan for the Buffalo Countertop Electric Fryer range, compatible with both the single-tank CU614 and the twin-tank CU615 models. It is a direct like-for-like replacement, designed to restore the fryer to full working order when the original pan has been damaged or worn through regular service use.

In a busy kitchen, fryer pans take considerable punishment — repeated heating cycles, mechanical knocks, and the general wear that comes with daily cleaning and heavy use. Having a spare pan to hand means that a damaged basket housing or cracked pan does not put the whole unit out of service during a critical period.

This pan is suited to operators who already run the CU614 or CU615 and need a straightforward, correctly fitting replacement without modification or adaptation. It is not a universal fryer pan and will not fit other models in the Buffalo range or third-party countertop fryers.

If you are unsure whether this pan matches your specific fryer model, or if your unit is showing other signs of wear that a pan replacement alone may not resolve, our team is happy to help you work through the options before you order.

This is a genuine Buffalo replacement supporting grid, designed specifically for the free-standing single tank twin basket gas fryer. It is a direct replacement part intended to restore the fryer to its original factory configuration.

Using genuine manufacturer parts in commercial catering equipment is generally preferable to aftermarket alternatives, as fit, finish, and material specification are matched to the original design. A correctly fitting supporting grid keeps baskets stable during service and helps maintain consistent frying results.

This grid is confirmed compatible with the Buffalo HU199 fryer. If you are unsure whether this part fits your specific unit, it is worth checking your fryer's model number before ordering, as Buffalo produce several fryer variants and not all accessories are interchangeable across the range.

If you need help identifying the correct replacement part for your equipment, our team is happy to assist — it is always easier to confirm compatibility before ordering than to manage a return afterwards.

This is the manufacturer's replacement drip pan for the Buffalo combi BBQ and griddle unit, compatible with the CP240 model. Its purpose is straightforward: to collect fat, grease, and food debris that falls away from the cooking surface during use, keeping the unit clean and reducing the risk of flare-ups or build-up beneath the griddle plate.

In a busy kitchen, drip pans on combination grill and griddle units take a significant amount of punishment. Regular exposure to high heat, heavy grease loads, and frequent emptying means they wear out or become damaged over time. Having a direct replacement to hand avoids unnecessary downtime when the existing pan warps, corrodes, or is no longer serviceable.

• Direct replacement part — fits the Buffalo CP240 combi BBQ and griddle
• Collects grease and debris during cooking to keep the unit clean
• Straightforward to remove, empty, and refit between services
• Helps maintain safe operating conditions by managing grease accumulation
• Keeps the unit running as intended without improvised alternatives

This part is specifically matched to the CP240. If you are unsure whether this pan fits your model, or if you are looking for other Buffalo service parts, it is worth checking with the team before ordering to avoid a return.

This is a purpose-built floor stand designed specifically for the Buffalo CU621 countertop electric fryer. It provides a stable, dedicated base that positions the fryer at a practical working height rather than on a prep surface, which is a straightforward but worthwhile improvement in busy frying sections.

In a working kitchen, having the fryer at the correct height makes a genuine difference to how safely and efficiently the team can operate it. Basket changes are easier, oil checks are more manageable, and the risk of awkward reaching or lifting is reduced. It also frees the counter space the fryer would otherwise occupy, which in smaller kitchens can be a meaningful gain for prep and plating.

• Positions the CU621 fryer at a safe, ergonomic working height
• Frees counter space for prep and service use
• Stable base reduces movement during service
• Straightforward to clean around and beneath
• Genuine Buffalo accessory — guaranteed fit with the CU621

As a genuine Buffalo accessory, fit is confirmed for the CU621 model. There are no compatibility questions to work through, and it is supplied and supported through the same channel as the fryer itself. Installation is straightforward and requires no specialist trades.

This stand suits any operation already running or planning to run the Buffalo CU621 — from small cafés and takeaways to pub kitchens where floor space is limited and counter space is at a premium. It is a simple addition, but one that improves how the fryer integrates into the section.

If you are unsure whether this fits your setup or want to discuss how best to position your frying equipment, we are happy to help.