Restaurant Equipment Accessories

This is the manufacturer's replacement small basket for the Buffalo HU198 electric free-standing fryer. It is a direct like-for-like replacement designed to restore the fryer to its original working configuration when the original basket becomes worn, damaged, or lost in a busy kitchen environment.

Fryer baskets take considerable punishment in commercial use — repeated immersion in hot oil, heavy handling during service, and regular cleaning all take a toll. Having a direct replacement to hand avoids unnecessary downtime when a basket reaches the end of its working life, which in a high-volume kitchen can happen sooner than expected.

Because this basket is matched to the HU198, operators can be confident it will seat and handle correctly without modification. Using a non-matched basket risks poor fit, uneven cooking, and potential safety issues, so sourcing the correct part matters.

If you are unsure whether this basket is the right replacement for your model, or if you are looking for a spare to keep alongside your fryer, it is worth checking with us before ordering to confirm compatibility.

This is a replacement drip tray designed to fit the Buffalo P108 and P109 countertop griddles. It sits beneath the cooking surface to collect fat and food residue during service, helping to keep the surrounding worksurface clean and reducing the risk of grease build-up around the unit.

Keeping a spare drip tray on hand is a practical consideration in any busy kitchen — swapping trays during service allows for quick cleaning without taking the griddle offline for extended periods. If the current tray has become damaged or warped through heavy use, replacing it promptly helps maintain safe operating conditions and supports the longevity of the griddle itself.

If you are unsure whether this tray is compatible with your specific griddle or need to confirm the right part for your setup, feel free to get in touch with the team before ordering.

This is the manufacturer's replacement fryer basket designed specifically for the Buffalo CP793 induction fryer. If the original basket has become damaged, deformed, or lost during a busy service period, this provides a direct like-for-like replacement without the need to source a generic alternative that may not sit correctly in the unit.

Fryer baskets take considerable punishment in a working kitchen — repeated immersion, knocks against pans and counters, and the thermal stress of moving between cold product and hot oil. Having a spare or replacement to hand is straightforward preventative thinking, particularly in operations where the fryer is in continuous use across a lunch and dinner service.

A few practical points worth noting:

• Designed exclusively for the Buffalo CP793 — fitment is not guaranteed on other models
• A like-for-like replacement maintains the original cooking capacity of the fryer
• Keeping a spare basket reduces downtime if the primary basket becomes unserviceable mid-service

This basket is suited to any operator already running a CP793 induction fryer who needs to maintain the unit in working order. It is a straightforward consumable purchase rather than a considered equipment decision, though if you are unsure whether this fits your specific unit or have questions about accessories for your fryer setup, the team is happy to help confirm compatibility before you order.

This is a genuine Buffalo replacement cooking grid, supplied as a direct spare part for the Buffalo folding gas BBQ (model JA377). It is a like-for-like replacement designed to restore the cooking surface when the original grid has worn, warped, or corroded through regular use.

Keeping a spare grid on hand is a practical measure for any operator running outdoor or occasional BBQ service. Swapping the grid rather than replacing the whole unit keeps the BBQ in service with minimal downtime, which matters when the product is part of a seasonal or event-driven menu.

If you are unsure whether this grid fits your specific unit, or if you are looking at replacement parts for a different Buffalo BBQ model, it is worth checking with the team before ordering to avoid an unnecessary return.

This is the manufacturer-supplied replacement fire bowl for the Buffalo DR826 charcoal grill. If you need further guidance on compatibility or fitting, our team is happy to help before you order.

This is a genuine replacement 1/2 GN pan designed for Buffalo countertop electric fryers. It is compatible with the 5-litre single fryer (CU616), the twin 2x5-litre fryer (CU618), the 5-litre fryer with timer (CU622), and the twin 2x5-litre fryer with timer (CU624). If one of these units is in service and the original pan has become damaged, warped, or worn through regular use, this is the correct like-for-like replacement.

Replacing a damaged pan promptly keeps the fryer operating safely and to the correct oil capacity. A warped or degraded pan can affect oil levels, heat distribution, and cleaning consistency — all of which matter during a busy service. Having a spare on hand is a practical step for any kitchen that relies on these units daily.

• Direct replacement — no modification required for listed Buffalo models
• Maintains correct oil capacity and heat distribution
• Suitable for kitchens running CU616, CU618, CU622, or CU624 fryers
• Straightforward swap with no specialist tools needed

If you are unsure whether this pan is the correct fit for your unit, or if your fryer model is not listed above, it is worth checking with us before ordering.

This is a genuine replacement basket for the Buffalo GH160 pasta cooker (model GH160-A). If the original basket has become damaged or lost, fitting a like-for-like replacement restores the unit to its full working specification without the need to replace the cooker itself.

Keeping a spare basket on hand is a practical consideration for any operation running continuous pasta service — it allows one basket to be in use while another is cleaned, or provides immediate cover if the original is damaged during a busy shift.

If you are unsure whether this basket is compatible with your model, or if you need guidance on whether a replacement part or a full unit replacement is the right route, the team is happy to advise.

These are genuine Buffalo replacement cook plate liners designed specifically for the Buffalo JD457 high-speed convection oven. They sit directly on the cook plates to provide a non-stick cooking surface, helping food release cleanly and reducing the build-up of baked-on residue that would otherwise accumulate on the plates themselves.

In a busy service environment, the difference between a protected cook plate and an unprotected one shows quickly. Liners take the direct contact from food oils, marinades, and melted fats, meaning the plates underneath stay cleaner for longer and are less prone to degradation over time. Food lifts more reliably during service, which matters when speed and presentation are both under pressure.

• Reduces food sticking and aids clean release during service
• Protects the cook plate surface from grease and residue build-up
• Reusable and quick to remove between services
• Speeds up end-of-service clean-down by reducing soaking and scraping
• Genuine Buffalo accessory — precise fit for the JD457

Because these are sized precisely for the JD457, fitting is straightforward and there is no trimming or adjustment required. They can be removed, cleaned, and replaced quickly, keeping downtime between services to a minimum.

These liners are a practical consumable for any site running a JD457 oven regularly. If you are unsure whether these are the right fit for your machine or have questions about maintaining your oven's cook plates more broadly, our team is happy to point you in the right direction.

This floor stand is purpose-built to support the Buffalo 600mm countertop chargrill, raising it from a worktop or floor position to a comfortable and safe working height. It is a straightforward, functional piece of kit — stainless steel construction, designed to be stable under a piece of equipment that sees continuous heat and heavy daily use.

In a busy kitchen environment, having the chargrill at the correct working height matters more than it might seem. An incorrectly positioned grill slows down plating, increases fatigue during a long service, and can create awkward working angles that affect both safety and output. This stand resolves that by bringing the unit up to counter height, integrating it cleanly into the cook line without requiring a bespoke fabricated solution.

Practically, the stainless steel build means it is resistant to grease, heat, and the kind of heavy-handed cleaning that commercial kitchens require. It is straightforward to wipe down and does not trap debris in complex joints or surfaces.

• Raises the chargrill to a practical, ergonomic working height
• Stainless steel construction — durable and easy to clean
• Stable base suited to continuous service use
• Removes the need for custom fabrication or worktop modification
• Compatible with the Buffalo 600mm countertop gas chargrill and Buffalo 600mm natural gas griddle

This stand is suited to operations where the Buffalo 600mm chargrill is being used as a floor-standing unit rather than a countertop appliance — smaller kitchens, pop-up setups, or sites where worktop space is at a premium. It is a dedicated accessory, not a universal stand, so compatibility with your specific Buffalo unit should be confirmed before ordering.

If you are unsure whether this stand suits your kitchen layout or equipment configuration, we are happy to talk it through.

This is a genuine Buffalo replacement tray support designed specifically for the Buffalo HX569 charcoal oven. Tray supports are a working component of any charcoal oven — they hold the cooking tray or grill at the correct height during service, and like any part subject to high heat and repeated loading, they can wear or become damaged over time.

Replacing a worn or damaged tray support promptly is important for safe and consistent operation. A correctly seated tray ensures even heat distribution and prevents trays from shifting during busy service, which can affect cooking results and create a safety risk.

This is a like-for-like replacement part. It is designed to fit the HX569 model only — if you are unsure whether this is the correct part for your unit, or if you have an older or variant model, it is worth checking before ordering to avoid a return.

If you would like to confirm compatibility or have any questions about maintaining your Buffalo charcoal oven, the team is happy to help.

This is the replacement large fryer basket for the Buffalo HU198 electric free-standing fryer. It is a direct replacement part, designed to restore full basket capacity when the original basket has been lost, damaged, or worn through heavy use.

Fryer baskets take considerable punishment in a busy kitchen — repeated immersion, high temperatures, and daily cleaning all take a toll. Having a spare or replacement basket available means a fryer doesn't have to come off the line while a replacement is sourced.

This basket is compatible with the Buffalo HU198 fryer. If you are unsure whether this basket fits your specific fryer model, or if you need to check availability of other Buffalo fryer accessories, our team is happy to help before you order.

This is the replacement waste oil container for the Buffalo 600 Series Electric Griddle range. It sits beneath the griddle plate and collects grease and cooking residue during service, keeping the cooking surface clear and making end-of-service cleaning more straightforward. It is a direct replacement part rather than a piece of primary cooking equipment.

Compatible models include the 3kW Griddle 400mm (CU473), the 3kW Ribbed Griddle 400mm (CU474), and the Dual Zone Griddle 600mm Three Phase (CU475). If you are unsure which container fits your unit, it is worth checking the model number on your griddle before ordering, as oil container designs can vary between series.

Keeping a spare container on hand is a sensible precaution in a busy kitchen. A cracked or missing container is a hygiene and safety concern, and having a replacement available means a damaged part can be swapped out without disrupting service or leaving the griddle out of action.

If you are unsure whether this is the correct part for your griddle, or if your unit is from a different Buffalo series, feel free to get in touch and we can help confirm compatibility before you order.

This floor stand is purpose-built to support the Buffalo 900mm countertop gas chargrill and the Buffalo 900mm natural gas griddle, raising either unit from a countertop position to a practical standing working height. It is a straightforward, functional piece of equipment — its job is to give the chargrill a stable, dedicated base on the kitchen floor rather than occupying valuable counter or pass space.

In a working kitchen, having the chargrill at the correct height makes a real difference during service. Operators can work at a natural stance for extended periods, which reduces fatigue and helps maintain consistent output across a shift. The stainless steel construction keeps cleaning straightforward and holds up well in the demanding environment of a commercial kitchen.

• Raises the chargrill to a comfortable standing working height
• Frees up counter space for other preparation or service tasks
• Stainless steel finish is easy to wipe down and resistant to kitchen conditions
• Provides a stable, dedicated base for the unit during service
• Compatible with Buffalo 900mm gas chargrill and 900mm natural gas griddle

Before purchasing, it is worth confirming that your kitchen floor space accommodates the combined footprint of the stand and chargrill together, and that there is sufficient clearance for ventilation and safe operation of the gas appliance above. This stand is designed specifically for the Buffalo 900mm range — it is not a universal fit for other brands or sizes.

This stand suits operators who have already chosen or are running a Buffalo 900mm chargrill and want a proper floor-mounted setup rather than a counter installation. If you are still deciding on the chargrill itself or are unsure about the right configuration for your kitchen layout, feel free to give the team a call — it is often worth a quick conversation before you commit.

These are genuine Buffalo replacement cook plate liners designed specifically for the Buffalo JD457 high speed convection oven. They sit directly on the cook plates to provide a non-stick surface that helps food release cleanly and protects the plates themselves from direct contact with food residue, grease, and debris during cooking cycles.

In a busy service environment, cook plate condition has a direct effect on food presentation and throughput. A liner that releases food cleanly reduces the need for intervention between covers, and the reusable non-stick surface means less scraping and soaking during clean-down. Over time, this helps extend the working life of the cook plates themselves, which are a more costly component to replace.

• Non-stick surface aids clean food release and protects plate condition
• Reusable design reduces consumable costs over time
• Slots in and out quickly to keep downtime to a minimum
• Simplifies clean-down at the end of service
• Genuine Buffalo parts engineered to fit the JD457 precisely

These liners are a straightforward fit for the JD457 and require no tools or adjustment. Being genuine Buffalo components, sizing and material specification are matched to the original equipment, which matters when fit and heat transfer performance need to be consistent.

They are suited to any operation running a JD457 high speed oven where cook plate maintenance and service efficiency are a priority — from hotels and staff restaurants to contract caterers and quick-service operations. If you are unsure whether these are the correct liners for your specific oven configuration, the team are happy to confirm compatibility before you order.

This is the genuine Buffalo replacement heatproof top tray designed specifically for the Buffalo CJ753 salamander grill. It fits directly in place of the original tray and restores the unit to its intended working condition without the need for fabricated workarounds or improvised alternatives.

In a busy kitchen environment, salamander components take considerable punishment from sustained radiant heat, grease, and daily cleaning. When the top tray becomes damaged, warped, or cracked, replacing it promptly with the correct OEM part ensures the unit continues to perform safely and consistently through service.

Using a genuine Buffalo part rather than a generic substitute means the tray will seat correctly, maintain the designed clearances from the heating elements, and handle the thermal demands the CJ753 places on it during normal operation. Incorrect or poorly fitting trays can create uneven heat distribution and, more importantly, a safety concern.

This tray is a direct like-for-like replacement and is suited to any operator running a CJ753 salamander who needs to return the unit to service quickly. It is worth confirming the serial number or manufacture date of your salamander with our team if you have any doubt about compatibility before ordering.

This is the manufacturer's replacement drip tray for the Buffalo CP240 combi BBQ and griddle unit. Its purpose is straightforward: to collect fat, cooking juices, and food debris that fall through the grill surface during service, keeping the unit cleaner and reducing the risk of flare-ups or residue build-up on the appliance base.

In a busy kitchen, drip trays take a considerable amount of heat and grease over the course of a service. Having a genuine replacement part to hand means you can swap out a damaged or heavily soiled tray quickly, keeping the unit in safe working order without downtime. A well-fitting tray also makes end-of-service cleaning more manageable, since the bulk of the debris is contained in one removable component rather than spread across the interior.

This tray is designed specifically for the Buffalo CP240, so it should seat correctly and perform as the original. Using a non-compatible or poorly fitting tray risks grease escaping into areas of the unit that are harder to clean and potentially affecting performance over time.

If you are unsure whether this is the correct part for your unit, or if your CP240 has an older or revised specification, it is worth checking with us before ordering — we can confirm compatibility and advise on availability of other consumable parts for the same appliance.

This is a genuine Buffalo replacement oil tray designed specifically for the Buffalo extra wide cast iron griddle (HT762). It sits beneath the griddle plate to collect rendered fat and grease as it runs off during cooking, keeping the work area cleaner and reducing the risk of grease build-up causing issues during a busy service.

In a working kitchen, oil trays take a reasonable amount of punishment — repeated heating and cooling cycles, constant grease exposure, and regular cleaning. Using a genuine manufacturer part rather than a generic substitute means the fitment is correct and the tray handles the conditions it was designed for without warping or poor drainage alignment.

Replacing a worn or damaged oil tray promptly is straightforward maintenance that helps protect the griddle itself. A deteriorated tray can lead to grease spilling onto burner components or the floor, creating both a hygiene problem and a slip hazard.

This tray is compatible with the HT762 Buffalo extra wide cast iron griddle. If you are unsure whether this part fits your specific Buffalo griddle model, it is worth checking with us before ordering — our team can confirm compatibility and advise if a different replacement part would be more appropriate.

This is a genuine Buffalo replacement crumb tray designed to fit the Buffalo 900mm and 600mm natural gas griddles. It sits beneath the cooking surface to collect food debris and grease droppings during service, keeping the interior of the unit clean and reducing the risk of grease build-up that can cause flare-ups or affect burner performance over time.

In a busy kitchen, crumb trays take a fair amount of daily punishment. Grease, food particles, and repeated removal for cleaning all add up, and over time the original tray can warp, corrode, or simply wear out. Replacing it with a genuine part ensures the correct fit and maintains the griddle's performance as intended.

A few practical points worth noting:

• Genuine Buffalo part — correct fit for JA870 (900mm) and JE095 (600mm)
• Supports routine cleaning and helps protect the burner assembly below
• Simple like-for-like replacement with no tools required
• Using a non-genuine tray risks an incorrect fit and potential safety issues

If you are unsure whether this tray fits your specific griddle model, or if you are seeing performance issues that suggest something beyond a worn tray, it is worth getting in touch before ordering — we are happy to help you identify the right part.

This is a genuine replacement cast iron pan support designed specifically for the Buffalo 700 Series gas range cooker (model JB963). Pan supports take considerable punishment in a working kitchen — repeated thermal cycling, heavy pots, spillage, and constant handling all take their toll. When a support becomes cracked, warped, or unstable, it creates a safety concern and disrupts the consistency of the cooking surface, so having a reliable replacement to hand is a practical consideration for any operator running Buffalo 700 Series equipment.

Cast iron pan supports are chosen for commercial range cookers because the material holds up well under sustained heat and the weight of large stockpots, sauté pans, and gastronorm vessels. A damaged or missing support affects pot stability directly, which matters during a busy service when speed and safety both count.

This part is a like-for-like replacement, so fitting it requires no modification. It restores the burner position to its original configuration and keeps the cooking surface operating as intended. Keeping a spare in stock is sensible for kitchens where the range runs consistently through lunch and dinner service.

This part is suited to any operation already running the Buffalo JB963 range cooker and needing to replace a worn or damaged pan support. If you are unsure whether this support is compatible with your specific unit, or if you have a different model within the Buffalo range, it is worth checking with the team before ordering.

This is a genuine Buffalo replacement detergent tray, designed to fit the Buffalo Smart Touchscreen Combi Ovens — specifically the 7 x GN 1/1 and 11 x GN 1/1 models. Its role is straightforward: it holds the cleaning detergent used during the oven's automated wash cycles, allowing the self-cleaning programme to run as the manufacturer intended.

In a busy kitchen, combi oven cleaning cycles are a daily routine. A damaged or missing detergent tray can interrupt that cycle entirely, leaving residue in the oven cavity and potentially affecting food hygiene compliance. Replacing a worn tray promptly keeps the cleaning programme functioning correctly and avoids unnecessary downtime.

Using a genuine Buffalo part rather than an aftermarket alternative is worth considering here. The tray is dimensioned to sit correctly within the oven's cleaning system, ensuring detergent is dispensed as designed. Aftermarket parts vary in quality and fit, and a poor fit can affect how the cleaning solution is distributed during the wash cycle.

This tray is a direct replacement consumable — there is no installation complexity involved. It is suitable for any operator running one of the compatible Buffalo combi oven models who needs to restore or maintain the oven's self-cleaning function.

If you are unsure whether this tray is the correct part for your specific oven, or if you are experiencing issues with your combi oven's cleaning cycle more broadly, feel free to get in touch with the team before ordering.

This castors kit is designed to fit Buffalo combi oven stands, specifically the AP120, AP121, and AT707 models. It allows the stand — and the oven mounted on it — to be moved on a wheeled base rather than sitting on fixed feet, which is a practical consideration in kitchens where equipment occasionally needs to be repositioned or where cleaning access underneath and behind the unit is a regular requirement.

In a working commercial kitchen, even a small gain in manoeuvrability can make a meaningful difference. Being able to roll an oven away from the wall for deep cleaning, or to shift equipment around during a kitchen reorganisation, avoids the awkward and potentially hazardous business of lifting heavy units. Castors of this type are a straightforward fitment to the existing stand and are a common choice for operators who want more flexibility in how their kitchen is laid out over time.

It is worth confirming before fitting that your kitchen floor surface and any drainage channels or lips at floor level are suitable for wheeled equipment movement. Where ovens are connected to fixed services — gas, water, or ventilation — any movement on castors will be limited by the length and flexibility of those connections, and you should account for this when positioning the unit.

This kit suits operators using compatible Buffalo combi oven stands who want to add or replace the wheeled base. If you are unsure whether this kit is the right fit for your stand or your kitchen setup, our team is happy to help you confirm compatibility before you order.

This is a genuine replacement rack designed specifically for the Buffalo Economy Pie Cabinet with 60-pie capacity (model CJ559). If a rack in your existing unit has become damaged or worn, this part allows you to restore full holding capacity without replacing the cabinet itself.

In a busy service environment — cafés, school canteens, bakeries, or grab-and-go counters — a missing or damaged rack reduces the number of pies you can hold at temperature, which directly affects throughput during peak periods. Having a spare or replacement on hand is straightforward preventative practice for any site relying on this cabinet day to day.

Because this rack is matched to the CJ559 cabinet, it will fit correctly without modification. Using non-compatible racks risks uneven loading, instability, or interference with the cabinet door — all of which are worth avoiding in a working kitchen.

If you are unsure whether this is the correct part for your cabinet, or if you are working with a different Buffalo pie warmer model, it is worth checking with us before ordering to avoid a return.

This is a replacement or spare frying basket designed for use with the Caterlite single tank countertop fryer. Fryer baskets are a routine consumable in any commercial kitchen — handles wear, wire joints fatigue under repeated immersion, and having a spare to hand avoids unnecessary downtime during service.

For a straightforward piece of smallwares like this, there is little complexity to the buying decision, but it is worth confirming compatibility before ordering. Basket sizing is specific to the fryer tank it is intended for, and a basket that does not seat correctly in the tank can create a safety risk as well as an operational one. If you are unsure which basket corresponds to your fryer model, it is worth checking before purchasing.

If you are looking at replacing ageing fryer accessories more broadly, or if the fryer itself is showing its age, our team can advise on whether a like-for-like replacement part is the right move or whether a full unit replacement would be more cost-effective in the longer run.

This is the genuine Buffalo replacement detergent tray for the CK110 Smart Touchscreen Compact Combi Oven — the six GN 1/1 three-phase model. It is a straightforward like-for-like replacement part, designed to sit correctly within the oven's automatic cleaning system and ensure that detergent is dispensed as intended during the wash cycle.

The automatic cleaning function on the CK110 depends on the detergent tray being present and correctly seated. A damaged, warped, or missing tray can interrupt the clean cycle, which in a busy kitchen means either running the oven uncleaned through service or taking it out of action at an inconvenient time. Keeping a spare on hand is sensible practice for any site that relies on the oven daily.

This part is suited to operators running the Buffalo CK110 who need to maintain the integrity of the oven's cleaning programme. It is not a universal fit — it is specific to the CK110 and should not be assumed compatible with other Buffalo combi models without confirmation.

If you are unsure whether this is the correct tray for your oven, or if you are looking for other consumables and replacement parts for the CK110, the team is happy to help you identify exactly what you need.

This is the manufacturer's replacement grill tray for the Caterlite 26-litre air fryer microwave oven, model JB572. It is a direct-fit spare part intended to replace a worn, damaged, or missing grill tray in that specific unit, restoring the oven to full working condition without the need for improvised alternatives.

In a busy kitchen environment, grill trays take considerable punishment — repeated high-heat cycles, heavy-handed cleaning, and the general wear of continuous service. Having a genuine replacement to hand means downtime is kept to a minimum when a tray reaches the end of its useful life, rather than taking the unit out of service while a suitable part is sourced.

This tray is designed specifically for the JB572 model. It is not a universal fit and will not be suitable for other Caterlite units or third-party air fryer microwaves. If you are unsure which model you have, it is worth checking the unit's rating plate before ordering.

If you have any doubt about compatibility or need advice on spare parts for other Caterlite equipment, the team is happy to help point you in the right direction before you order.

This is a genuine replacement water filter cartridge from Jantex, designed specifically for use with Buffalo Smart Touchscreen Combi Ovens — the 7 x GN 1/1 (CK079) and the Compact 6 x GN 1/1 (CK110). It fits directly into the oven's water filtration system and requires no tools or specialist knowledge to change over.

Combi ovens rely on a consistent supply of filtered water to generate steam accurately and protect internal components from scale build-up. In areas with moderate to hard water — which covers a significant portion of the UK — an unserviced or expired filter can accelerate limescale accumulation, affect steam quality, and shorten the service life of the oven. Keeping the filter cartridge on a routine replacement cycle is straightforward preventive maintenance rather than an optional extra.

Each cartridge is rated to filter up to 3,000 litres before it needs replacing. For most busy kitchens running a combi oven through regular service periods, that typically equates to several months of use, though actual lifespan will vary depending on local water hardness and oven usage frequency.

• Genuine Jantex part — confirmed fit for CK079 and CK110
• Helps protect the oven's steam system from scale damage
• Simple cartridge swap with no specialist tools required
• Supports consistent steam quality during service

It is worth checking your local water hardness when estimating replacement intervals. Sites in hard water areas may find they need to replace cartridges more frequently than the rated maximum suggests.

If you are unsure which filter is correct for your oven model, or want guidance on a maintenance schedule suited to your kitchen's usage, the team is happy to help.

This is a replacement rack designed specifically for the Buffalo CJ558 pie cabinet, which holds up to 30 pies. If the original rack has warped, been damaged, or gone missing, this is the correct like-for-like replacement to restore the cabinet to full working order.

Pie display cabinets rely on their racking to hold product at a consistent level and allow warm air to circulate evenly around each pie. A damaged or ill-fitting rack can affect presentation, airflow, and safe holding — so using the correct replacement part rather than an improvised alternative is the sensible approach in a busy service environment.

If you are unsure whether this rack is compatible with your cabinet, or if you are replacing multiple components, it is worth getting in touch before ordering — we can confirm fitment and advise on anything else that may need attention.

This grilling rack is a replacement or additional accessory designed specifically for use with the Buffalo CD679 grill. It provides a stable, elevated cooking surface within the grill cavity, allowing food to be positioned correctly for consistent heat exposure and even cooking results.

In a commercial kitchen, having the right rack in place is a straightforward but important detail — the wrong fit can affect cooking performance, airflow within the grill, and safe handling during service. This rack is matched to the CD679 unit, so operators can be confident it will seat correctly and function as intended.

• Direct replacement for the Buffalo CD679 grill unit
• Provides correct positioning for consistent cooking results
• Maintains airflow and heat distribution within the grill cavity
• Supports efficient cleaning and maintenance routines
• Keeps the grill operating safely and to its original specification

If you are unsure whether this rack is compatible with your specific unit, or if you need advice on additional accessories for your grill setup, the team is happy to help clarify before you order.

This is a genuine Buffalo replacement basket designed for use with the Buffalo JA370 doughnut fryer. It is a like-for-like spare part intended to restore the fryer to full working order when the original basket becomes worn, damaged, or lost.

Using a genuine manufacturer basket ensures correct fit and safe operation within the fryer tank. Third-party alternatives can vary in dimension and finish, which may affect how the basket seats and handles during service — something worth considering in a busy production environment.

If you are unsure whether this basket is compatible with your specific Buffalo fryer model, or if you need guidance on sourcing other replacement parts for your equipment, our team is happy to help confirm compatibility before you order.